Thanks I have some wisdom with this. Thanks for your efforts and experience. I'm great full for your skills and your communication abilities. This is so important for safety your clearly explained each step. I am truly grateful for your effort and time in making this video and I been asked by several people to help them learn about battery and have been looking for a good reference to help them. I will gladly give them your TH-cam channel and ask that they check there work with your videos always the student I will check my battery build's with your videos. Experience 5 years, currently finishing 3 bms 200 + cell 72v scooter battery . I'll see what I can do about bringing some new subscribers to channel truly a great job
Just put the normally open thermal switch in parallel with the on/off switch instead of cutting it off, this way it will still switch off if the battery gets too hot and you can still use the on/off switch.
Isn't it better to run the ground somewhere else than over the cell monitoring cables to avoid shorts if the fragile silicone shielding fatigues? E.g. have it run around the other side of the battery?
Hi, I have a ebike with a 500 watt motor. The BMS went bad. Cells look good individually and producing 54v altogether. Bought replacement 13s BMS but the old one has no C- but new one does. Seems all new ones include C- so what to do in this situation? Is negative charge/discharge through P- ok? Or do you have BMS you recommend? Thanks
Hey my man ive some 36volt 500watt 60cell batterys i want to join some together ,do i need one big bms or can i put 1 bms on each pack then join them all together. Im looking for big oower my man 🎉🎉😂
Ann power on Aliexpress has exact same bms as he was using, but it has built in switch. I.ve been using theirs for over 2 years, built a lot of batteries with them and im very pleased with the quality.
@@tpaprika735 Im not sure im allowed to link it here but in the video description The doctor linked his bms. Go on that link, then go on the store page and you.ll find it there. They have plenty of flavors:))
![ความรักของยักษ์เขียว (ทศกัณฐ์) - เดี่ยว ไออุ่น [OFFICIAL MUSICVIDEO 4K]](http://i.ytimg.com/vi/yCCy-QVHqK8/mqdefault.jpg)
Love this channel, one of the best for ebikes on you tube
Thanks I have some wisdom with this. Thanks for your efforts and experience. I'm great full for your skills and your communication abilities. This is so important for safety your clearly explained each step. I am truly grateful for your effort and time in making this video and I been asked by several people to help them learn about battery and have been looking for a good reference to help them. I will gladly give them your TH-cam channel and ask that they check there work with your videos always the student I will check my battery build's with your videos. Experience 5 years, currently finishing 3 bms 200 + cell 72v scooter battery . I'll see what I can do about bringing some new subscribers to channel truly a great job
Just put the normally open thermal switch in parallel with the on/off switch instead of cutting it off, this way it will still switch off if the battery gets too hot and you can still use the on/off switch.
Where too buy This small black box he using for check the voltage and charging 😊😊
up to 96S LFP and NMC BMS
Isn't it better to run the ground somewhere else than over the cell monitoring cables to avoid shorts if the fragile silicone shielding fatigues? E.g. have it run around the other side of the battery?
Hi, I planed to use only one pin for charge and discharge. The BMS I Bought came with C-. Can we join C- and P- in the same pin?
Is it ok to put the BMS sense leads in the middle of each group instead of in-between?
good day! i have broken 10s 36v 50a bms... can i use 10s 36v 15a bms for replacemnt?
Also what is the black probes for ? Are they temperature aswell
I was about to take apart someone electric scooter for a 36vbattery, now Ill just make one.
Hi, I have a ebike with a 500 watt motor. The BMS went bad. Cells look good individually and producing 54v altogether. Bought replacement 13s BMS but the old one has no C- but new one does. Seems all new ones include C- so what to do in this situation? Is negative charge/discharge through P- ok? Or do you have BMS you recommend? Thanks
C- most be connected to charging minus only. discharge to P-.
Good 👍
Hey my man ive some 36volt 500watt 60cell batterys i want to join some together ,do i need one big bms or can i put 1 bms on each pack then join them all together. Im looking for big oower my man 🎉🎉😂
which bms can I use with an on-off switch (ebike 250/350w 36v)?
Ann power on Aliexpress has exact same bms as he was using, but it has built in switch. I.ve been using theirs for over 2 years, built a lot of batteries with them and im very pleased with the quality.
@@mariusc2137 do you have a link?
@@tpaprika735 Im not sure im allowed to link it here but in the video description The doctor linked his bms. Go on that link, then go on the store page and you.ll find it there. They have plenty of flavors:))
WHere is negativ and where
Postive
He really didn't explain much on what he was doing eg where the wires go etc
why 36v uses 10S bms instead of 9S? this seams to be the common practice but no explanation!
It's based on discharged voltage. 3.6 * 10 = 36v, 3.6 * 9 =/= 36
Horrible. Why would you have the battery facing away from us on 8:00mins. Can't even see what ur doing or what wires ur testing. Lol's ur video lol
If you take the time to LISTEN to what he says, he tells you what wires he is testing at 8.00mins.