FSAE Chassis Torsional Analysis and Side Impact Analysis in SolidWorks | SolidWorks Tutorial 🔥2021🔥
ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2024
- Part 2 | FSAE Chassis Side Impact Simulation in SolidWorks | FSAE Chassis Torsional Simulation in SolidWorks | Formula Bharat Chassis | Formula Imperial Chassis | Supra Chassis | How to Perform Side Impact Analysis on FSAE Chassis in SolidWorks? | What are the Steps to be Perform for Side impact Analysis? | How to Enable the Simulation Tab (Option) in SolidWorks? | How to Rename the analysis in SolidWorks? | How to Apply (Select) Material to Chassis in SolidWorks? | How to Edit Joint and Convert Green Joint to Purple Colour? | How to Fix the Geometry of Chassis in SolidWorks Simulation? | How to Change the Size and Colour of Arrows in SolidWorks Simulation? | How to Apply the Gravitation Force (G Force) to Chassis? | How to apply the Force on the Chassis Nodes in SolidWorks Simulation? | How to Reverse the Direction of Force in SolidWorks Simulation? | How to Mesh and Run the Chassis Simulation in SolidWorks? | How to find the Factor of Safety (FOS) of Chassis? | How to Perform the Front Torsional Analysis/ Rear Torsional analysis/ SideImpact Analysis in SolidWorks? | Which Node to be Fix while Front Torsional/Rear Torsional/Side Impact in SolidWorks?
--------------------------------------------------------------------------------
About This Video
Hello Guys!!
I have made a video on Solidworks Simulation Tutorial where I have Explain How to Perform a Side Impact Analysis, How to Perform Front Torsional Analysis and How to Perform the Rear Torsional Analysis in SolidWorks Simulation with Easy Step by Step Procedure.
--------------------------------------------------------------------------------
Queries Solved in this Video
1. How to Perform Side Impact Analysis on FSAE Chassis in SolidWorks?
2. What are the Steps to be Perform for Side impact Analysis?
3. How to Enable the Simulation Tab (Option) in SolidWorks?
4. How to Rename the analysis in SolidWorks?
5.How to Apply (Select) Material to Chassis in SolidWorks?
6. How to Edit Joint and Convert Green Joint to Purple Colour?
7. How to Fix the Geometry of Chassis in SolidWorks Simulation?
8. How to Change the Size and Colour of Arrows in SolidWorks Simulation?
9. How to Apply the Gravitation Force (G Force) to Chassis?
10. How to apply the Force on the Chassis Nodes in SolidWorks Simulation?
11. How to Reverse the Direction of Force in SolidWorks Simulation?
12. How to Mesh and Run the Chassis Simulation in SolidWorks?
13. How to find the Factor of Safety (FOS) of Chassis?
14. How to Perform the Front Torsional Analysis/ Rear Torsional analysis/ SideImpact Analysis in SolidWorks?
15. Which Node to be Fix while Front Torsional/Rear Torsional/Side Impact in SolidWorks?
--------------------------------------------------------------------------------
Previous Video Link:- • FSAE Chassis Simulatio...
--------------------------------------------------------------------------------
Playlist
SolidWorks Tutorial Playlist:- • SolidWorks Tutorial Be...
Mechanical Joints Playlist:- • Mechanical Engineering...
FSAE Playlist:- • All About FSAE (Formul...
--------------------------------------------------------------------------------
Social Media Link
📷 Instagram :- simplerandomkn...
Facebook Page :- simplerandomkn...
Twitter :- simplerandomkn...
--------------------------------------------------------------------------------
HASHTAGS
#sideimpactanalysis #fronttorsionalanalysis #reartorionalanalysis #formulabharatchassis #formulaimperialchassis #suprachassis #fsae #fsaeelectric #simplerandomknowledge #dassault
About This Video
Hello Guys!!
I have made a video on Solidworks Simulation Tutorial where I have Explain How to Perform a Side Impact Analysis, How to Perform Front Torsional Analysis and How to Perform the Rear Torsional Analysis in SolidWorks Simulation with Easy Step by Step Procedure.
Nice tutorial , thanks for the information , also keep up the good work
Thanks Adinath
thank you for this video
Thank you Siddhesh ❣️
Nice
Thank you
How do you determine how much torsional stiffness is enough?
Check factor of safety, if it's more than 1 then ok, you can go with your design.
@@SimpleRandomKnowledge Thanks, now how do you know what load should you apply? I believe load value might change in a different car.
That value we get from suspension people's by calculating speed and weight of car
@@SimpleRandomKnowledge that calculation would be good topic for next video
When doing the side impact analysis why did you use 1000 N per item?
Basically there is a simple calculation for it. As per rule book which I refer, I assume 20g force on side impact. So multiple 20 with weight of car and divide into nodes.
@@SimpleRandomKnowledge what if my car weight is 600 kg
@@abhishekdutta3264 you've got a problem
how to calculate angle of twist and other parameters
Use trigonometry to covert displacements to angles.
I could not get a video on how to edit those green dots
Ok, I'll make one video for you on this topic.
Hello sir
do we have to combine those front and rear torsional analysis to get an overall value for torsional stiffness?
Simply multiple the total weight by 9.81 then divide the value by 4 cause force going to create couple force which will act in opp direct then apply that force in ansys you will get the value
For example the total force is 10000 N hence I will add 250 N in one direction and 250 N on other directions hence couple force is created and chassis will deflect
I am facing error in meshing....I have messaged on instagram regarding the same
Watch my video on 3 Easy Method to Locate gap in between chassis Pipes.
@@SimpleRandomKnowledge I tried that.... it's still not helping...how could I reach you personally so that I can send my files
Now that was the only way I can help you, Sorry But Actually I don't provide any technical support other than providing videos.
As per My experience the reason of mesh failure are the one which I have discussed in video, if then too the problem persist try to do weldment again PROPERLY.
Chromoly 1010