Blown 302 Ford -This engine is SOLD

แชร์
ฝัง
  • เผยแพร่เมื่อ 28 ส.ค. 2024
  • 302 SBF
    Factory Block Bored .30
    Eagle 3.00 Crank new
    H-Beam Rod with 8740 Bolt
    SRP 9 to 1 forged Piston
    Mahle rings new
    Aluminum aftermarket head
    Aluminum aftermarket rocker arm new
    Erson hdy street/strip custom grind new
    Weiand stripped 174 blower
    1,000 cfm holley
    Msd distributor
    Msd wires
    Rings bearing oil pump gasket New
    550 est horsepower with a 50/50 mix fuel on 8psi
    Freshen up by Boxperformance (please contact us if you are interested in building an engine like this)

ความคิดเห็น • 24

  • @ericbengtson3490
    @ericbengtson3490 5 ปีที่แล้ว +5

    What a cute little blower!

  • @aljackson7330
    @aljackson7330 5 ปีที่แล้ว +2

    You guys can make even a ford sound healthy! Good job!

    • @blowersurge
      @blowersurge  5 ปีที่แล้ว

      Thank you!! We put a little extra in it just because we can. lol

  • @GaryH-pw9cm
    @GaryH-pw9cm 10 หลายเดือนก่อน

    Holley stopped making these blowers last year. 😮‍💨

  • @willyrida274
    @willyrida274 14 วันที่ผ่านมา

    How much psi did it push at operating temp

  • @aljackson7330
    @aljackson7330 4 ปีที่แล้ว +2

    Pretty damn nice for a Ford! How much HP? What's it going in? Hope I'm ready at the stop light if it shows up!

    • @blowersurge
      @blowersurge  4 ปีที่แล้ว

      I don’t remember the stats on this one. It went out of state so I don’t even know what it went into. But it was a nice little baby Ford. 😘

  • @TheMetalshop101
    @TheMetalshop101 4 ปีที่แล้ว +1

    Is that a boost referanced carb on that ??? I'm running pretty much the same set up my engine stops if it goes below 1000 rpms no vacuum leaks im lost cant figure it out

    • @blowersurge
      @blowersurge  4 ปีที่แล้ว

      It is not a boost referanced carb. I don't use them. I calibrate the carburetors myself. It could be many things causing that issue. I would need to know things like what cam is in your engine and how your distributor is set up.

    • @TheMetalshop101
      @TheMetalshop101 4 ปีที่แล้ว

      @@blowersurge 88 5.0 rollermotor with e cam gt40 heads holley 750carb just a basic stock distributor

    • @TheMetalshop101
      @TheMetalshop101 4 ปีที่แล้ว

      What distributor is on there

  • @MET90LX
    @MET90LX 5 ปีที่แล้ว +1

    Is this a package or just a freshen up that you’re selling?

    • @blowersurge
      @blowersurge  5 ปีที่แล้ว +1

      Patrick Huszarik it is a Engine that was freshened up.

    • @MET90LX
      @MET90LX 5 ปีที่แล้ว

      Box Performance Inc. any information on price? Or should I call the shop?

    • @blowersurge
      @blowersurge  5 ปีที่แล้ว +1

      Patrick Huszarik the price is $5,900

  • @roberttannis3067
    @roberttannis3067 ปีที่แล้ว

    How modified is this 302?

  • @garrettcaswell8189
    @garrettcaswell8189 5 ปีที่แล้ว

    How much

    • @blowersurge
      @blowersurge  5 ปีที่แล้ว

      Garrett Caswell $5,900

    • @garrettcaswell8189
      @garrettcaswell8189 5 ปีที่แล้ว

      Where you located I'm interested

    • @blowersurge
      @blowersurge  5 ปีที่แล้ว

      Garrett Caswell we are located about 30 minutes southwest of Cleveland, Ohio

    • @blowersurge
      @blowersurge  5 ปีที่แล้ว

      Garrett Caswell where are you located?

    • @garrettcaswell8189
      @garrettcaswell8189 5 ปีที่แล้ว +1

      I'm in texas. How much would shipping cost? I have a 72 ranchero gt I would love to put that in.