I'm about to replace all for my 2015 Q5 discs and set of pads this weekend. This tutorial came out at just the right time. Very clear and excellent video, great job.
I love how your pistons magically compressed themselves to allow the new pads to slide right in. I wish my calipers were that courteous. I had to get a special tool.
just unplug the electric brake motor. Run leads from a 12v battery to the motor piston. This will bypass all the computer requirements. Reverse polarity to drive the piston open or closed.
Sure NOW you post a step by step video. I did this last Summer on my Audi 3.2L Q5 with parts from FCP Euro. It all went together well but this project was the thing that got me to pull the trigger on a Milwaukee 3/8 Impact M18. Dealer wanted $900 for the same service. Uuummm nope.
Can I reuse the brake hardware pins for the anti rattling? Because my new brakes only come with the big middle metal piece not the two long pins. So can I reuse them or order new ones?
I am customer of yours and love to see and learn from brake rotor and pad replacement DIY videos for Audi q7 2017 onwards - Front and back. This is for my personal vehicles. You VW Atlas videos but for some reason no q7
Pretty awesome. Seems simple enough, "IF" steps are followed as shown. Thank You FCP Euro. In the future I'll look into upgrading my Front Brakes to this Brembo set. Perhaps when I add a little more power to my B8.5 allroad.
Does this kit comes with zinc coating on rotors ? I cannot tell in the fc website description. How reliable and differences vs the oem original audi rotors and pads ?
This info was not correct when I changed the brakes on my 2016 AUDI SQ5. The tools needed were completely different sizes and the process was different.
Thanks for the demonstration. Super useful! The tool list at the beginning was useful too. Just curious, is replacing the rotors with the pads a "must do" or a nice to do. My rotors looks pretty smooth and hardly worn.
My Sensor Just Popped Up Today About My Brake Pads.. Change Them All Correct? & If So, Could I Just Order Them From Your Store? All Fairly New To Me To Be 100% Honest
Hi Pedro, the light can come on and be for either the front or the rear pads. You can do a visual inspection to see if you need to do the front or rears, or scan the car to see the code. From there we recommend you replace both the pads and discs on the worn-down end.
hopefully there is a similar video on how to do the rear rotor and pads with the electronic brake (release issue?) - ??? Audi Q5 TDI. 9:37 did the rear using 12 volt alarm battery with small alligator clips, and bingo, bango DONE!
Just done mine. It was fun as the piston is used for the handbrake. There’s a TH-cam video of a guy using a battery to move the piston back, watch it and follow it unless you have the device to plug in for retarding the piston
After telling my mechanic that I could change the brake pads on my 2018 Audi Q5…he said I couldn’t because I need a computer to do it….is this accurate?
Yes, but only when replacing the rear pads. You need a scan tool to disengage the rear electronic parking brake. If just replacing the front brakes, you don’t need a computer.
Removing the pins is the same, but need to remove the caliper off, which has 2x size 21mm bolts and then a clip holding brake hose/pipe to be able to get caliper off to install new brake pads.
Great instructional video, only problem i'm having is when I went to change my brake pads on my 2018 Q5 the Brembo calipers looked different. These calipers prevent me from simply sliding out the pads from the backside of the caliper. The calipers I have are Brembo but are designed with a closed back preventing the pads from being removed through the rear of the caliper. Also the clips are a bit different. Ive searched several YT vids for a tutorial with no success. Does this particular caliper need to be removed completely? Are you planning on doing a tutorial on this style calipers? Thank you in advance.
Hi Raider, The 18' model will have a slightly different setup as you saw! Not all Brembo units allow you to service the pads with the calipers still in place, you will have to remove the two bolts that hold them to the knuckle and service them that way. As soon as we get to that model, we will be sure to do a DIY on it!
i think mine was close to $3k @ Audi dealer after $100 "coupon". front and back. vs $650 for parts and some grunt work. bonus was being able to brush off rust and repaint rear calipers with high heat rustoleam, and make sure parts were greased up properly. no squeaks!
Not when they are coated like these. Non coated rotors come with oil on them in the packaging to prevent rust which should be cleaned off prior to installation.
I'm about to replace all for my 2015 Q5 discs and set of pads this weekend. This tutorial came out at just the right time. Very clear and excellent video, great job.
Hopefully it helps you while you're wrenching at home playid69!
@@fcpeuroI need a Information, if you can Help I apreciate much!!!
Was it the same process for the rear rotors and brakes?
@@erica3361well?
BEST detail video EVER! From every angle, well explained... thank you so much... More please😂
Extremely thorough video! I changed my own brake pads and rotors by myself. Helpful video
How can you not trust a guy with an Audi/VW tattoo? This gentleman is the real deal. Excellent video! Thank you.
Fantastic tutorial!! Was super straightforward, except the Pins!!! All 4 were super seized.
Awesome - thank you guys for this! Dealership wanted way too much for new brakes and rotors all the way around. I bought the kit from you guys!
We love saving people money David, glad to hear it!
Great details and professional. No hacked steps. Really appreciate knowing the steps BEFORE doing the job. Thanks!
Thanks for the tutorial! I noticed my anti rattle clips were originally installed the other way round. I'm glad I caught this thanks!
Is this job the same with having the 345mm rotors? My 2017 Q5 has the larger rotors.
Thanks for this video! Does the wear sensor need to be changed even though the light indicator didn’t come on in the car?
Explained quite well compared to other videos I've seen
Glad to hear it pstecle!
I love how your pistons magically compressed themselves to allow the new pads to slide right in. I wish my calipers were that courteous. I had to get a special tool.
I saw that too and I was like wait!!😂😂
Nice, now let's get a video on the rear with the electronic parking brake shenanigans. :)
just unplug the electric brake motor. Run leads from a 12v battery to the motor piston. This will bypass all the computer requirements. Reverse polarity to drive the piston open or closed.
Sure NOW you post a step by step video. I did this last Summer on my Audi 3.2L Q5 with parts from FCP Euro. It all went together well but this project was the thing that got me to pull the trigger on a Milwaukee 3/8 Impact M18. Dealer wanted $900 for the same service. Uuummm nope.
We love our Milwaukee rigs, they make every project better :-) Glad you saved a bunch of money DIY'ing it Bill!
@@fcpeuro scored some points with the wife and my eight year old son didn’t learn any new swear words - double bonus.
More videos on Q5s would be great.
Lots more coming out Chris!
@@fcpeuro for an sq5 2014 what disc I need
Great video, the trick to push the pads back. Spot on. Easy Peasey!
Can I reuse the brake hardware pins for the anti rattling? Because my new brakes only come with the big middle metal piece not the two long pins. So can I reuse them or order new ones?
Don’t you have to rewind the pistons back into the caliper or is doing it the way you have sufficient
Do you not need to disengage the electronic parking system before removing the pads? Ty
Great video. I really like how often you "Go ahead"
Glad you liked it!
Anything about brake pistons or are those easily backed into caliper?
I am customer of yours and love to see and learn from brake rotor and pad replacement DIY videos for Audi q7 2017 onwards - Front and back. This is for my personal vehicles. You VW Atlas videos but for some reason no q7
It’s it the exact same for the sq5 2016 or is it slightly different
Pretty awesome. Seems simple enough, "IF" steps are followed as shown. Thank You FCP Euro. In the future I'll look into upgrading my Front Brakes to this Brembo set.
Perhaps when I add a little more power to my B8.5 allroad.
Good job thanks from France , best vidéo for change brakes
Glad you liked it!
Appreciate the time and great video, thanks.
Hi can you post how to change 2014 Audi Q5 oil pan thank you !
I would like to see a video on how to upgrade to bigger break kits on this very same vehicle
👍
I have a q5 hybrid, is the process the same.
Does this kit comes with zinc coating on rotors ? I cannot tell in the fc website description. How reliable and differences vs the oem original audi rotors and pads ?
Is this the same process for Q5 2020? Front
This info was not correct when I changed the brakes on my 2016 AUDI SQ5. The tools needed were completely different sizes and the process was different.
I mean, duh?
Any tips on removing those pins if they're stuck? Mine are seized, hit it with penetrating fluid but no luck.
A lot, and we mean a lot, of penetrating fluid, a small punch, and a hammer.
@@fcpeuro Thanks!
Thanks for the demonstration. Super useful! The tool list at the beginning was useful too. Just curious, is replacing the rotors with the pads a "must do" or a nice to do. My rotors looks pretty smooth and hardly worn.
It is good practice but not required. The "must do" is replace all 4 of whatever you are replacing not sure 1 or 2 sides.
This was awesome video man I appreciate you I really do
Excellent. We'll done. I was wondering how to get those pins out!
Is it possible for you to make 2015 Q5 rear brake pad replacement, thanks
We can certainly add it to our queue!
Awesome tutorial guys! Love the DIY content!
Glad you enjoyed it Mario!
What size pick do you need?
A little antiseize on the hub before putting the rotor on doesn't hurt. Especially since you sanded the corrosion away.
Thinking of doing this job on a 2018, any major differences to note?
How did it go? I just ordered my parts for my 2018 Q5 too. I think the Brembo calipers are different and more challenging.
Any different steps for the rear brakes?
no
Also, no lube on the clip or guide pins?
Quality demonstration. Thank you.
Glad you enjoyed it!
I wonder why you have not used ceramic pads?
Is this the same process for a 2020 Q5 or are the front brakes different?
Hi Matt, the idea will remain similar, with hardware and parts varying in size.
Should show it being done in the rears with EPB😌
What is EPB?
@@wbdharris electronic parking brake
You didn’t tell us about all the tools you used for this job, that flashlight on the backside looks very useful 😅
😂
Great video, very professional.
Excellent videos
My Sensor Just Popped Up Today About My Brake Pads.. Change Them All Correct? & If So, Could I Just Order Them From Your Store? All Fairly New To Me To Be 100% Honest
Hi Pedro, the light can come on and be for either the front or the rear pads. You can do a visual inspection to see if you need to do the front or rears, or scan the car to see the code. From there we recommend you replace both the pads and discs on the worn-down end.
hopefully there is a similar video on how to do the rear rotor and pads with the electronic brake (release issue?) - ??? Audi Q5 TDI. 9:37 did the rear using 12 volt alarm battery with small alligator clips, and bingo, bango DONE!
Do you have any tutorials for replacing the rear discs and pads on 2015 Q5? Thanks
Just done mine. It was fun as the piston is used for the handbrake. There’s a TH-cam video of a guy using a battery to move the piston back, watch it and follow it unless you have the device to plug in for retarding the piston
@@paulbeaumont7485 Why does the handbrake need to be on for the removal?
@@wbdharris He's talking about rear breaks (where you need to move the motor of the hand break back - better done through VCDS or obdeleven)
electronic break. little motor near caliper, can be moved back in with 12 volt battery with small alligator clips. video exists.
how about the 2019?
After telling my mechanic that I could change the brake pads on my 2018 Audi Q5…he said I couldn’t because I need a computer to do it….is this accurate?
Yes, but only when replacing the rear pads. You need a scan tool to disengage the rear electronic parking brake. If just replacing the front brakes, you don’t need a computer.
Is this the same for 2018 (second gen) SQ5?
Removing the pins is the same, but need to remove the caliper off, which has 2x size 21mm bolts and then a clip holding brake hose/pipe to be able to get caliper off to install new brake pads.
Great instructional video, only problem i'm having is when I went to change my brake pads on my 2018 Q5 the Brembo calipers looked different. These calipers prevent me from simply sliding out the pads from the backside of the caliper. The calipers I have are Brembo but are designed with a closed back preventing the pads from being removed through the rear of the caliper. Also the clips are a bit different. Ive searched several YT vids for a tutorial with no success. Does this particular caliper need to be removed completely? Are you planning on doing a tutorial on this style calipers? Thank you in advance.
Hi Raider, The 18' model will have a slightly different setup as you saw! Not all Brembo units allow you to service the pads with the calipers still in place, you will have to remove the two bolts that hold them to the knuckle and service them that way. As soon as we get to that model, we will be sure to do a DIY on it!
excellent video
Can you do SQ5 brake pads and rotors please?
Thank you ❤️
Nice, but I still have a squealing issue on my 2014. It not a small squeal it's load and disturbing.
I have the same problem. Even tried putting another new set of pads on and still squealing
nice work!
Thank you! Cheers!
Those pins are the hardest part
Looks nothing like my 2015 SQ5 front rotors. I have the 380mm discs.
Yeah this looks completely different from my 2016 SQ5 callipers
Mus man nicht elektronische Parkbremse rückstellen bevor man die Bremsen wechselt.
SQ5 is a totally different style caliper.
My man got the Audi tattoo on his left wrist!! He gotta know his shit!!!
345mm
Hub was not clean ;(
Local Audi dealership quoted me $3,300 for front and rear brake pads (not even rotors) for my ‘13 Q5 😂 I walked straight out the door.
i think mine was close to $3k @ Audi dealer after $100 "coupon". front and back. vs $650 for parts and some grunt work. bonus was being able to brush off rust and repaint rear calipers with high heat rustoleam, and make sure parts were greased up properly. no squeaks!
Guys please use brake cleaner on your rotors first.
Not when they are coated like these. Non coated rotors come with oil on them in the packaging to prevent rust which should be cleaned off prior to installation.
So, this can be used the same way for a 2018 2.0 Q5?
Ever figure this out? Getting ready to do my 2018 2.0 soon