Fun to show my kids - thanks for making this video. I previously worked for 15 years for British Vita in the UK as a development chemist and most of their machines are Henneke technology. Brings back a lot of fun memories! The slabstock process is amazing to show to other people and one of my favourite activities was giving people plant tours.
Thanks Steve, its great to hear about your experiences and the fact that you even showed your kids. We hope they weren't bored with it :-) If you are around, please pay us a visit - we have a lot of new developments which could be interesting for you.
Simon bu köpükleri hangi karışımla yapıyorlar isimleri nedir karışımların.benim evin tavanı ahşap üstüne bu sıvı köpükten sıkıp ısı yalıtımı elde etmek istiyorum.Türkiyede bunu şirketler pahalı yapıyor
Great to see your comments, thank you! We are proud of our technology and admire your amazing experience. We wish you a lot of success with the MULTIFLEX and good high quality foam.
The most important benefits of the FLAT-TOP system are the optimal use of raw materials and improved foam properties in terms of density and hardness distribution. In our experience, there are no problems with escaping gases from the final product, as this already happens during production despite the usage of a paper top. If you have any further questions or want to discuss technical details, please contact our product experts via our website: www.hennecke.com/en/products/slabstock/conti/multiflex
I worked at foam plant and worked on pouring line. I had to jump on belt remove weights of the butcher paper while the hot foam was steaming next to me. I ended up getting throat cancer 10 years later tdi chemical does cause cancer in mice. Polyurethane not to bad.
Temperature and humidity are important factors when processing polyurethane and could affect your production. Luckily, the finished products like, for example, matresses don't have similar properties as ice cream 🍦🍦 and therefore won't melt even on hot days. That would be rather inconvenient. 😱
In a nutshell? The main difference is that in high-pressure machines the components are mixed by high-pressure collision - as the name suggests. Low-pressure machines, on the other hand, use air mixing, possibly with the addition of a stirrer-mixer. There are, of course, other differences. If your question relates to specific machine details, you will find more information on our website: www.hennecke.com/en/products/dosing/overview Our experts will be happy to advise you. You can find your regional contact here: www.hennecke.com/en/company/worldwide/overview
Thank you for your comment, this is great to hear! We have a lot of slabstock machines in the Middle East. These machines have a long lifetime, so it is highly likely that yours is still running today. We are proud of our technology and hope that you will be able to use your experiences of our equipment in the future too.
@@HenneckeGROUP Thank you for your response. Yes, it is true. I worked on a high pressure machine, and in addition to that on several types of machines such as Max Foam
Thanks for your comment. Of course we have representatives all over the world. Please find below the information for Egypt: Business Gate for Imp & Exp Building No 1191, In-front of Sun Mall Zahraa Nasr City Cairo (Egypt) Mr. Alaa Gharib Phone +20 248245626 Mail: businessgate2000@gmail.com
Hello and thank you for your request. We offer training on various topics, including our machines and plants. However, some trainings on specific machines are only offered at our customers' sites and are therefore not available for external parties. All information can be found here: www.hennecke.com/en/services/360/trainings
I have query for 23 density Pu foam Does it exothermic reaction. How many temperature raised while process after adding in mould What is the reaction of Pu foam mixture with latex mould
Pu foam temperature depends upon the parts of water and amount Tdi used in formulation, for 23 density pure foam it may be around 155 c if you use Mcl it may reduce depending upon the parts of Mcl
Thanks for your comment! To get detailed information about Hennecke GROUP machines and plants, please contact us directly: Mail: info@hennecke.com Phone: +49 2241 339 0
Hello and thank you for your interest! The price for a MULTIFLEX can vary depending on the respective specifications. Please contact our product experts via slabstock@hennecke.com. They will be happy to provide you with a suitable offer.
Please inquire about the chemical formula in printing foam at different levels of quality (density). Can you send accurate information about the materials used to print the foam and the amount of each material? In English
Thanks for your comment! To get detailed information about the production process shown in this video, please contact our Hennecke slabstock experts directly: Mail: slabstock@hennecke.com Phone: +49 2241 339 0
I have query for 23 density Pu foam Does it exothermic reaction. How many temperature raised while process after adding in mould What is the reaction of Pu foam mixture with latex mould
Thanks for your interest. Yes, the reaction is exothermic and the highest temperature in a PU block is reached several hours after foaming. This temperature can reach also over 150°C or even higher. In case of slabstock there is no mould. The foam comes in the case of MULTIFLEX out of the tunnel as a square continuous block, cut in acertain length by a block cutter.
![[LIVE] : ONE ลุมพินี 87 วันนี้!! คู่เอก "ก้องชัย vs โชคปรีชา"](http://i.ytimg.com/vi/YN6e7HVnekw/mqdefault.jpg)
Fun to show my kids - thanks for making this video. I previously worked for 15 years for British Vita in the UK as a development chemist and most of their machines are Henneke technology. Brings back a lot of fun memories! The slabstock process is amazing to show to other people and one of my favourite activities was giving people plant tours.
Thanks Steve, its great to hear about your experiences and the fact that you even showed your kids. We hope they weren't bored with it :-)
If you are around, please pay us a visit - we have a lot of new developments which could be interesting for you.
Hello Simon, id be interested in speaking to you. Please respond to this message if you can :).
British Vita uses Cannon Vicking!
Simon bu köpükleri hangi karışımla yapıyorlar isimleri nedir karışımların.benim evin tavanı ahşap üstüne bu sıvı köpükten sıkıp ısı yalıtımı elde etmek istiyorum.Türkiyede bunu şirketler pahalı yapıyor
Hennecke is good foaming machine. Feel proud to say I have operated UBT 100, UBT 250 and now multiflex machine
Great to see your comments, thank you! We are proud of our technology and admire your amazing experience. We wish you a lot of success with the MULTIFLEX and good high quality foam.
I have few problem with top paper load due to which some cut issue as raised I tried to send mail at
service.hennecke-group.com but mail failed
Hennecke is the best, trust me!
Worked on Hennecke in UK and commissioned machine in Germany..
Just wowwwww..... Amazing Hennecke
The Hennecke slab stock continuous line is well equipped with the latest technology.
Wonderful machine. Small doubt how are the gases go out from the full rise area? because we closed the foam completely by paper.
The most important benefits of the FLAT-TOP system are the optimal use of raw materials and improved foam properties in terms of density and hardness distribution. In our experience, there are no problems with escaping gases from the final product, as this already happens during production despite the usage of a paper top.
If you have any further questions or want to discuss technical details, please contact our product experts via our website: www.hennecke.com/en/products/slabstock/conti/multiflex
I worked at foam plant and worked on pouring line. I had to jump on belt remove weights of the butcher paper while the hot foam was steaming next to me. I ended up getting throat cancer 10 years later tdi chemical does cause cancer in mice. Polyurethane not to bad.
How is this liquid prepared?
does this melt on the very hot humid days!!
Temperature and humidity are important factors when processing polyurethane and could affect your production. Luckily, the finished products like, for example, matresses don't have similar properties as ice cream 🍦🍦 and therefore won't melt even on hot days. That would be rather inconvenient. 😱
Hennecke brief the technical difference between high and low-pressure foam mschine.?
In a nutshell? The main difference is that in high-pressure machines the components are mixed by high-pressure collision - as the name suggests. Low-pressure machines, on the other hand, use air mixing, possibly with the addition of a stirrer-mixer. There are, of course, other differences.
If your question relates to specific machine details, you will find more information on our website: www.hennecke.com/en/products/dosing/overview
Our experts will be happy to advise you. You can find your regional contact here: www.hennecke.com/en/company/worldwide/overview
I worked with henneck old machine it is called high pressure slabstock machine its good machine that was on Dubai in year 1998
Thank you for your comment, this is great to hear! We have a lot of slabstock machines in the Middle East. These machines have a long lifetime, so it is highly likely that yours is still running today. We are proud of our technology and hope that you will be able to use your experiences of our equipment in the future too.
@@HenneckeGROUP Thank you for your response. Yes, it is true. I worked on a high pressure machine, and in addition to that on several types of machines such as Max Foam
What kind of paper is used in the machine?
How can exchange with me the ideas about this process
Good morning, could you please ask if there is a representative in Egypt to talk to him about the importance
Thanks for your comment. Of course we have representatives all over the world. Please find below the information for Egypt:
Business Gate for Imp & Exp
Building No 1191, In-front of Sun Mall
Zahraa Nasr City
Cairo (Egypt)
Mr. Alaa Gharib
Phone +20 248245626
Mail: businessgate2000@gmail.com
Tienes WhatsApp??
Hi it's step by step to produce foam .
Maddenin adı nedir
Those where some thick beds.
Where i can get proper education and practice to operate this machine ?
Hello and thank you for your request. We offer training on various topics, including our machines and plants. However, some trainings on specific machines are only offered at our customers' sites and are therefore not available for external parties. All information can be found here: www.hennecke.com/en/services/360/trainings
I have query for 23 density Pu foam
Does it exothermic reaction.
How many temperature raised while process after adding in mould
What is the reaction of Pu foam mixture with latex mould
Pu foam temperature depends upon the parts of water and amount Tdi used in formulation, for 23 density pure foam it may be around 155 c if you use Mcl it may reduce depending upon the parts of Mcl
To inquire about the whole production line of automatic CD sponge
Thanks for your comment! To get detailed information about Hennecke GROUP machines and plants, please contact us directly:
Mail: info@hennecke.com
Phone: +49 2241 339 0
NIce
Price of this machine
Hello and thank you for your interest! The price for a MULTIFLEX can vary depending on the respective specifications. Please contact our product experts via slabstock@hennecke.com. They will be happy to provide you with a suitable offer.
How much in kilo
Hallo, ich möchte Schaumblock von enternet kaufen, wo ich fragen kann. (Ich wohne in memmingen) danke
No 1
Price
Please inquire about the chemical formula in printing foam at different levels of quality (density). Can you send accurate information about the materials used to print the foam and the amount of each material?
In English
Thanks for your comment! To get detailed information about the production process shown in this video, please contact our Hennecke slabstock experts directly:
Mail: slabstock@hennecke.com
Phone: +49 2241 339 0
عايز اعمل مصنع في مصر بنفس التكنولوجيا المبتكر دي وشكرا
على فكرة المصنع ده فى مصر
@@ebrahimeldaly5101 ما انا عارف الشركه الكنديه
É muita tecnologia
ما شاء الله
Big butter
Wat Sapp
The first half was boring as heck. Why would we want to watch a bunch of pipes lmao
Your choice of music is terrible
Thanks for your comment. So we like the selected sound ;) and hope it doesn´t distract you from our innovative slabstock technology.
He's just mad they didn't use a Beiber song.
The very reason we're here, everything has to be an entertaining "experience". :/
I have query for 23 density Pu foam
Does it exothermic reaction.
How many temperature raised while process after adding in mould
What is the reaction of Pu foam mixture with latex mould
Thanks for your interest. Yes, the reaction is exothermic and the highest temperature in a PU block is reached several hours after foaming. This temperature can reach also over 150°C or even higher.
In case of slabstock there is no mould. The foam comes in the case of MULTIFLEX out of the tunnel as a square continuous block, cut in acertain length by a block cutter.
Maddenin adı nedir