Hello, thank you for this wonderful demonstration, I'm about to carry out to a similar experiment and I'm grateful for this video. I wanted to ask tho, the mixing ratio prescribed the company for part 1 and 2 is 1 to 1.06 but you used 1:1. Does that not cause any issues at all?
Hi Daniel, thank you for pointing this out its an old video using our old formula. Our current is 1 to 1.06, although small mixes would still work at 1:1 anything like a 25ltr mix would be best done exact to the 1 to 1.06. thanks again for drawing this to our attention I will make an updated video soon.
@ecfibreglassuk thank you for the swift response. I'm currently experimenting with smaller samples so this is very useful tip thank you. Perhaps I could vary their densities by working between those 2 ratios. For the updated video, I hope we can see tips on the extraction process since it can get very sticky maybe a recommendation of adhesives that work well with it. I'm doing an impact test on the PUF and I understand from the datasheet that it needs to be restrained to make it uniform, will it be possible to showcase something like this as well?
@@danielaj3451 yes having a mould closed off to restrain it will help make the foam more uniform. whichever foam you use try to follow the mix ratio advised exactly, obviously sometimes its hard to control the pour so you will be gram out here or there but that's nothing to worry about. we've never moulded with our foam it is often just used as a buoyancy chamber filler so I'm not sure what release agent can be used to remove it? for gluing i would assume some sort of rubberised contact adhesive or epoxy can be used?
if I made up a clamp mould for a surfboard blank, would this foam using 2 A's and 2 B's be enough? and would it be dense enough once it is compressed in the mould, unable to expand any further, bearing in mind that any soft spots are not good for shaping and glassing surfboards.
Cuando pidas Poliol e Isosianato de denciadad en vacio, que sea 40 kg/m3 ya que puedes darle mas dencidad, hasta 60 kg/m3, calculandolo el volumen =masa/peso
Thanks for thr amazing video. Can I spread this out with a spatula once I pour it? Im covering a large surface area but I dont need the foam super high. Just a thin layer covering the area.
Nice information, could you please tell us if this foam can be applied to a wall manually without a spray gun If this foam gives out harmful fumes when mixed and applied. How to clean the buckets once the work is done.
Hi, this is for pouring only. It should be used in a well ventilated area with proper safety precautions observed. You could scrub it out of the buckets
Hi Sam, unfortunately we are not familiar with the type of foam used for footwear. you will probably need to find a main supplier of polyurethanes and ask their advice.
Hello, I have an urgent question. If I want the material to appear exactly like a flexible sponge with many holes and not stick together, should I use polyurethane foam part 1 only?
HI For a flexible foam or sponge you will need a different type of foam altogether. some foams are specifically designed to be flexible or spongy when cured. This one is purely designed to be rigid and reducing mixes of one part will only prevent it from curing. Kind regards.
hello, ecfibreglassuk, I have a crack in my bathtub and as I noticed that there is an empty space under it (this could be reason of the crack) can I use this PU Foam liquid to fill the empty space and then I could fix the bathtub surface ?
sorry to inform you that I'm not able to fix from the under since it already attached to ceramic, so if I will be able to remove it I would then replace it at all. so, will this fill it right and fix that issue?
Hi, I really couldn't say without having a look at the crack to see what's needed. This on it's own is great for gap filling quickly without adding too much bulk, but it's no good on it's own. You'd have to do your own digging to see if this would work the way you need it to.
To make PIR foam I have to use the same materials with different proportions or it is a different mixture? I'm searching for an alternative for this foam in a way to use in a cnc machine.
It will generate quite a bit of heat while it's curing. It can't be brushed, only poured and allowed to expand. The safety data sheet is here www.ecfibreglasssupplies.co.uk/images/SafetyDataSheet/1717.pdf
Hi here is the link to the products you will also find technical and safety data sheets here www.ecfibreglasssupplies.co.uk/pu-polyurethane-foam-liquid mixing ratio is typically :- Part 1 and Part 2 are mixed at a ratio of 1 to 1.06by volume, or preferably 1 to 1.2 by weight. However this ratio can vary between brands of PU products so it is best to check with your supplier first.
So if someone has a double wall and the spacing between the two walls is too tight for celotex then is this the best solution or is there any thing better for insulation?
i want to make a raft and use 44 gallon drums for flotation…12 of them…how much of this product would i need to fill each drum…also would i have to wait for it to stop expanding before i put the lid back in or would it be safe for me to seal it up once it hit the top and i was satisfied there were no air gaps in there…would it burst the drum…the reason i want this is i just want added security if i somehow puncture a drum i don’t want water getting in
Hello, I think you'd be better getting a sound insulating foam as there are different formulas for thickness/density etc, and this is meant to gap-fill boat hulls for buoyancy and balance
hello, please what is the difference between Polyurethane Foam Liquid and ECPU 3691? i want to cast molds for rc planes. which one do I want for a rigid lightweight solution? TY
So I’m looking for a floating liquid foam to fill a hot tub lid. Would this work with a vinyl surround / container? (Ok it’s a layzspa and I’m fed up with inflating the lid!!)
Might you know the maximum temp this mixture becomes and for approximately h ow long - when it sets? I have an app where I can see using this to fill voids (to help preventing rattling) in an interior car plastic panel. My concern is that this heat could distort the original shape of the interior panel. Do you know of any such similar products that have a lower cure temp.
@@ecfibreglassuk Thanks, but it doesnt seem to mention the temperature during the chemical reaction. It mentioned temps for storage of the chemicals, for ambient temperature when you are to use it, for material temperature for when you are to use it. Only way to know is for me to buy some, aim an IR thermometer at it as it does its chemical reaction. Or I will try to call a company who makes it. Again thanks.
Can you add this expanding foam to old existing foam? I’ve had to re-new the cooling hoses within the hull of my Kawasaki JS550 Jet-ski. The hoses were encased in expanding foam, so I had to dig the old foam out first, to replace them. Can I just pour your 2-part foam (once mixed) directly onto old foam without problems? Thanks.
look like your mix was a little better than mine. I waited to long and the pentane came out of the poly. I work for a iso/poly rigid foam insulation plant
Can somebody please give me advice? I am molding a 3-D animal target for archery and wondering what foam to pour to create the same/similar foam that shop bought ones have? Any help would be much appreciated. I was thinking about using this same polyurethane expanding foam but it seems too rigid and would break after only a few shots.
Hell...thats very good to know this..we need to know the items are avilable in Bangladesh or not ...can you just let me know the other name so we can search them...?
Hi, this is a closed cell foam. You'd have to do some testing to see if it would be suitable for use as insulation in a water tank, but it should be fine. Have a look at the data sheet for more info, the manufacturer should be able to give more info www.ecfibreglasssupplies.co.uk/images/TechnicalDataSheet/1717.pdf
Sir please tell me part 1 chemical name and part 2 chemical name please
Hey! This is what I just did in science class! Thank you for this demonstration.
6:30 that's the moment you realize you are in the shit and can't do anything about it... :D
Hahaha but thanks for the Entertainment
Hello, thank you for this wonderful demonstration, I'm about to carry out to a similar experiment and I'm grateful for this video.
I wanted to ask tho, the mixing ratio prescribed the company for part 1 and 2 is 1 to 1.06 but you used 1:1. Does that not cause any issues at all?
Hi Daniel, thank you for pointing this out its an old video using our old formula. Our current is 1 to 1.06, although small mixes would still work at 1:1 anything like a 25ltr mix would be best done exact to the 1 to 1.06. thanks again for drawing this to our attention I will make an updated video soon.
@ecfibreglassuk thank you for the swift response. I'm currently experimenting with smaller samples so this is very useful tip thank you. Perhaps I could vary their densities by working between those 2 ratios.
For the updated video, I hope we can see tips on the extraction process since it can get very sticky maybe a recommendation of adhesives that work well with it.
I'm doing an impact test on the PUF and I understand from the datasheet that it needs to be restrained to make it uniform, will it be possible to showcase something like this as well?
@@danielaj3451 yes having a mould closed off to restrain it will help make the foam more uniform. whichever foam you use try to follow the mix ratio advised exactly, obviously sometimes its hard to control the pour so you will be gram out here or there but that's nothing to worry about. we've never moulded with our foam it is often just used as a buoyancy chamber filler so I'm not sure what release agent can be used to remove it? for gluing i would assume some sort of rubberised contact adhesive or epoxy can be used?
That's exactly what I was looking for, thanks a lot
if I made up a clamp mould for a surfboard blank, would this foam using 2 A's and 2 B's be enough? and would it be dense enough once it is compressed in the mould, unable to expand any further, bearing in mind that any soft spots are not good for shaping and glassing surfboards.
Mat for yoga can be manufactured by polyurethane?
What density does this foam have?
Is it defined by the mix or resin/activator?
Cuando pidas Poliol e Isosianato de denciadad en vacio, que sea 40 kg/m3 ya que puedes darle mas dencidad, hasta 60 kg/m3, calculandolo el volumen =masa/peso
Hello, Great Video. Can you bottle this up and make it sprayable for a more precise application?
Hi, no it's too thick. You can get tons of varieties of spray application foam though
@@ecfibreglassuk bu karışımın isimleri nedir.?
Nice video. Why did you have to use 500mils for this demo?
Thanks for thr amazing video. Can I spread this out with a spatula once I pour it? Im covering a large surface area but I dont need the foam super high. Just a thin layer covering the area.
this is exactly what I've looking for, where I could buy this?
so mixing with electric mixer will produce lots of air pockets so i assume this will increase the volume size ???
Another question what would happen if you put a lid on and held it down with a waight. Would it be more compact.?
Is the end product like styrofoam?
Hi it is less dense than styrofoam,. its more like a builders spray foam.
Hi, if we want to make a double bed, how many lacs will we need? And tell me the names of these two Likots. Thank you
What you recommend to use as release agent for use in molds? Thx Ivan
Hi Unfortunately we only supply this for void filling we are not sure regarding moulding, i guess PVA release agent may work? Kind rgds Martin
Nice information, could you please tell us
if this foam can be applied to a wall manually without a spray gun
If this foam gives out harmful fumes when mixed and applied.
How to clean the buckets once the work is done.
Hi, this is for pouring only. It should be used in a well ventilated area with proper safety precautions observed. You could scrub it out of the buckets
I think what you need is foam spray!
Thanks! How to have a closed cell foam?
Can you de gas it in a chamber before mixing to get the gas out
What is the name of the chemicals used in the singular sponge industry Please reply with thanks
its in the title bruh
I was wondering what kind of foam I need for a P.U footwear application and where to get it?
Hi Sam, unfortunately we are not familiar with the type of foam used for footwear. you will probably need to find a main supplier of polyurethanes and ask their advice.
@@ecfibreglassuk thank you for reply
Could this be sprayed with a compressor and gun?
No
How can I buy this liquid? Please help 🙏 😢 😭
Hello, I have an urgent question. If I want the material to appear exactly like a flexible sponge with many holes and not stick together, should I use polyurethane foam part 1 only?
HI For a flexible foam or sponge you will need a different type of foam altogether. some foams are specifically designed to be flexible or spongy when cured. This one is purely designed to be rigid and reducing mixes of one part will only prevent it from curing. Kind regards.
why does this feel so satisfying to watch
Instead of manually working, is there any equipment where we can produce it in large quantities?
Yes there are injection machines for this purpose. Cannon is the most popular brand.
U think if someone gets filled with foam they won’t be able to breath n also is that flammable n can it become foam faster
Thanks for the vid! Any idea if it would disrupt the process if I mixed acrylic paint in during the stirring phase?
HI Unfortunately its not something we've tried. Kind rgds Martin
hello, ecfibreglassuk, I have a crack in my bathtub and as I noticed that there is an empty space under it (this could be reason of the crack) can I use this PU Foam liquid to fill the empty space and then I could fix the bathtub surface ?
Hi, you'd be better off doing a repair from the under side of the bathtub and building it up on the "finish" side to sand back, for maximum strength.
sorry to inform you that I'm not able to fix from the under since it already attached to ceramic, so if I will be able to remove it I would then replace it at all.
so, will this fill it right and fix that issue?
Hi, I really couldn't say without having a look at the crack to see what's needed. This on it's own is great for gap filling quickly without adding too much bulk, but it's no good on it's own.
You'd have to do your own digging to see if this would work the way you need it to.
thank you so much for the product and for your replies,, that was very helpful to me
Is this product non toxic when fully cured, would it be safe to make fake rocks for aquarium?
Hi, no it's not at all suitable for that
There are different grades. Not sure what one you are using. But how hard is the hardest grade.?
Hello, I was wondering what kind of foam I need for a seat application and where to get it?
Hi, www.google.co.uk/search?q=seat+foam&oq=seat+foam&aqs=chrome..69i57j0l5.3023j1j7&sourceid=chrome&ie=UTF-8
To make PIR foam I have to use the same materials with different proportions or it is a different mixture? I'm searching for an alternative for this foam in a way to use in a cnc machine.
Don't know, sorry
Please let me know where to get these two liquid. Please tell me as early as possible.
Is it a floral foam
where we will get this polytherium foam liquid in India
could this mixture be brush painted or spread in the inside of a structure for insulation? Is this harmful in any way? Will it burn?
It will generate quite a bit of heat while it's curing. It can't be brushed, only poured and allowed to expand. The safety data sheet is here www.ecfibreglasssupplies.co.uk/images/SafetyDataSheet/1717.pdf
I just saw this today /// and I need to fill 200 liter plastic barrel with it how can we do that and what quantity of it --please ?
Can I know the names of part 1 and part 2 , and ratios for compound mixing, thank you
Hi here is the link to the products you will also find technical and safety data sheets here www.ecfibreglasssupplies.co.uk/pu-polyurethane-foam-liquid mixing ratio is typically :- Part 1 and Part 2 are mixed at a ratio of 1 to 1.06by volume, or preferably 1 to 1.2 by weight. However this ratio can vary between brands of PU products so it is best to check with your supplier first.
The black liquid is called what and clear is also called what
Thanks!
Is there mhermacol sprey available in the marke?
Do you mean thermacol? It's not something we have any experience with
If the materials are not available, is there an alternative?
Can you send me the link to buy this products for a delivery in Paris (France) ? thanks
All of our products can be found for sale on our website, but unfortunately we cannot ship outside of the UK
Take the lid off of one. Pour it. Put the lid back on one. Take the lid off two. Pour it. Put the lid back on two. Mix. It's pretty simple.
1. ve 2. karışımın isimleri nedir kaç Gr ma kaç Gr kullanmak gerekir teşekkürler
This liquid fiberglass door use possible yes/ no
So if someone has a double wall and the spacing between the two walls is too tight for celotex then is this the best solution or is there any thing better for insulation?
Would really love to know the answer for that , good question.
Can it be used with saline to absorb oil, and how to make sponges with this?
No, sorry
@@ecfibreglassuk o! 😩it's okay tnq
i want to make a raft and use 44 gallon drums for flotation…12 of them…how much of this product would i need to fill each drum…also would i have to wait for it to stop expanding before i put the lid back in or would it be safe for me to seal it up once it hit the top and i was satisfied there were no air gaps in there…would it burst the drum…the reason i want this is i just want added security if i somehow puncture a drum i don’t want water getting in
Could this be used for Shoe soles?
Hello, it's not the right kind of foam for that.
Philip Aebischer اهاتتا
What's the name of Brown colour chemical AND white colour?
I have a hollow steel door that i would loike to make more sound proof. If drilled a hole in the top and poured this in would it help block sound?
Hello, I think you'd be better getting a sound insulating foam as there are different formulas for thickness/density etc, and this is meant to gap-fill boat hulls for buoyancy and balance
How to make it pure white?
Hii... What's the density of this manual mixing ?? Can we really determine that or is that fixed in case of manual injection and machine injection??
You should put a link to your website in the description near the top. :)
Done :)
How warm does the interaction get when the foam is expanding.
Hi not sure really , not that warm! hope this helps
Hi, do you know if the PU foam will bond to epoxy applied on the inside of aluminum beverage cans (beer cans etc.)?
must have some sort of profile for it to bite on better
Does this product have any insulation value?
Not really, it's pretty low density for maximum gap filling etc
Please Help
I want to make flower foam and I do not know the stability and method of work please help
hello, please what is the difference between Polyurethane Foam Liquid and ECPU 3691? i want to cast molds for rc planes. which one do I want for a rigid lightweight solution? TY
Hello can you fgiven to me the commercial name of to this 2 produits mixture please thank u
what are the Polyurethane densities in air Tem&pruss. ?
is it flammable?
There's more info on the safety data sheet - www.ecfibreglasssupplies.co.uk/images/SafetyDataSheet/1717.pdf
do you sell "flexible" expanding polyurethane foam? for example, when dry it isnt hard but squishy?
Sorry not sure where you will get this from , best rgds
you should try with silicone, sample process.
And what do you use this for ? Thanks for the video
Anywhere you need a low density polyurethane foam.
@@ecfibreglassuk thanks 🤔 I wonder if it's possible to make a mushroom 🤔 for my garden
@@easyfoodchannelsa You could use the foam to bulk up the inside of a hollow mushroom but on it's own it would be ruined by weathering etc
@@ecfibreglassuk can it be used in automobiles air filters
@@etminan233 yes, just mix it in the windshield fluid reservoir then pour it directly over the cabin filter - also works great in the fuel pump!
What is that solidified foam used for?
See the comment and response directly below this one
@@ecfibreglassuk can we make both softer and firm ones with this? And How do we do it?
@@KHK2101 You would need to buy the foam at the required shore rating
I want bye
So I’m looking for a floating liquid foam to fill a hot tub lid. Would this work with a vinyl surround / container? (Ok it’s a layzspa and I’m fed up with inflating the lid!!)
Hi, probably not
How much price is it..where is available...
On our website
What is the foam ligwriegh brick
Hi, no idea, sorry
Can you make a sneaker sole with this compound
Hi not really its way too soft ...
Might you know the maximum temp this mixture becomes and for approximately h ow long - when it sets? I have an app where I can see using this to fill voids (to help preventing rattling) in an interior car plastic panel. My concern is that this heat could distort the original shape of the interior panel. Do you know of any such similar products that have a lower cure temp.
Temperatures etc can be found on the technical data sheet here - www.ecfibreglasssupplies.co.uk/images/TechnicalDataSheet/1717.pdf
@@ecfibreglassuk Thanks, but it doesnt seem to mention the temperature during the chemical reaction. It mentioned temps for storage of the chemicals, for ambient temperature when you are to use it, for material temperature for when you are to use it. Only way to know is for me to buy some, aim an IR thermometer at it as it does its chemical reaction. Or I will try to call a company who makes it. Again thanks.
How can you turn the foam back into a liquid?
A blender and a little imagination?
Yea but you have to drive your car at 88 mph and travel back in time
the music makes it so intense XD
Do you know the material for making car seat foam?
www.google.com/search?q=car+seat+foam&rlz=1C1GCEU_enGB858GB858&oq=car+seat+foam&aqs=chrome..69i57j0l7.2359j0j7&sourceid=chrome&ie=UTF-8
whatever, these are better, they're called MUSHROOM SEATS
What kind of foam creates memory foam for pillows?
Hi, memory foam
ecfibreglassuk What is the chemical make up of memory foam?
Hello, I'm afraid you'll have to ask the manufacturers of memory foam
Can you add this expanding foam to old existing foam? I’ve had to re-new the cooling hoses within the hull of my Kawasaki JS550 Jet-ski. The hoses were encased in expanding foam, so I had to dig the old foam out first, to replace them. Can I just pour your 2-part foam (once mixed) directly onto old foam without problems? Thanks.
Hi, it will only bond if the old foam is dry and free from other contaminates such as oils etc
⁵⁴⁴4⁴4
Where can we buy?
Can you help me who to make polyurea waterproofing coating liquid
I love the video. The music is very distracting however, because it is almost louder than your voice.
How to buy
OK so random, almost not to so random question: What is the foam used for headphones?? Is it Acoustic foam??
Probably the same thing used in a dishwashing sponge
Depending on the density. Anything from sculptures to flotation in a boat
Where can I purchase the 2Part 2 cans? Is there a website?
The application is for aeroplane fuselage construction.
Thanks for helping me out friend :)
If your in UK give us a call on 0191 4975134 best rgds
One is to stir for how long?
The reaction starts after 30 seconds, so less than that
hi could you use it to fill a spot in the basement floor so radon don't get in your house? :)
How to add carbon/ color in it .
look like your mix was a little better than mine. I waited to long and the pentane came out of the poly. I work for a iso/poly rigid foam insulation plant
bu karışımların isimleri.nedir
is it light and tough enough to be used for RC Controller planes?
Hello, you'd have to do your own testing
Can't you get a can of spray able foam? Also, what's the point of this?
Spray foam is not the same product. This is used for a wide variety of applications.
@@ecfibreglassuk Can you tell me more about the applications?
The data sheet has more info www.ecfibreglasssupplies.co.uk/images/TechnicalDataSheet/1717.pdf
how do you make it not stick to a mold?
Hi, you would use something like release wax or PVA release agent
Can somebody please give me advice? I am molding a 3-D animal target for archery and wondering what foam to pour to create the same/similar foam that shop bought ones have? Any help would be much appreciated. I was thinking about using this same polyurethane expanding foam but it seems too rigid and would break after only a few shots.
+Tiger Mw Hi there, unfortunately that's not something we'd be able to help with, you may need to get in touch with a foam specialist.
Ok, thanks for the response.
I am an archer and I have worked with this poly foam. If you made a target out of this stuff it would not last long.
+Tiger You need an integral skin polyurethane foam
If we pour it into a silicone mold before the reaction starts, do you think it takes the silicone mold's shape at the end? Thanks
yes it would
Does it float in water?
Hi, the main reason we sell it is to add buoyancy to hulls etc. It's not 100% water proof, but water resistant to a point
Hello, I wish to build some 3D archery targets. Do you know what is the material used for that? Thanks!!! Pedro
Hi, no. It's not our foam
Hell...thats very good to know this..we need to know the items are avilable in Bangladesh or not ...can you just let me know the other name so we can search them...?
Can I use it in plastic electric geyser ?
Hi, we have no information on that
hello sir is this foam open celled or close cell and can this be used in solar heater water tank?? thanks
Hi, this is a closed cell foam. You'd have to do some testing to see if it would be suitable for use as insulation in a water tank, but it should be fine. Have a look at the data sheet for more info, the manufacturer should be able to give more info
www.ecfibreglasssupplies.co.uk/images/TechnicalDataSheet/1717.pdf
ecfibreglassuk thanks for responding so quickly...
What is this chemical name
Is it safe work without respiration filter?
+szender2021 Check the Safety Data Sheet online or ask them I assume
Hello, always work with good ventilation and fume-rated masks with anything that gives off a strong odor.
that would be Part 3
Your 500ml equal parts produces how much foam by volume?
Grejam53 Hi approx 5 lt
Very interesting ..
Can you help me to get the mix for the sofa set foams and matress foams of HD and LD densities.
How do I get the chemical
HI, you will have to google 2 part rigid polyurethane foam suppliers in your country. if however you reside in the UK we can supply. Kind rgds Martin