Sounds good. Just got my 034 resonator delete. Hoping it sounds just like this. Already got my intake and lowering springs. Time to do the delete n put my vorsteiners on
Yes! The resonator will have to be cut off. You do not necessarily have to weld on new piping though, new piping can be secured with a clamp which is what I did.
@@boostseason Great question! Tough choice but I would have to say intake, in my opinion, nothing can beat turbo spool and enhanced engine noise. Especially since it is difficult to make a 4 cylinder engine with a DSG transmission sound decent
@@nickdunn7003 yeah I’m leaning towards just an intake for now. how was it to install? and you’re right, it’s hard to make 4 cyl’s sound good. the Milltek resonated exhaust sounds good (videos on youtube), but it’s $1,900…
@@boostseason yeah exactly my problem haha, all the exhaust systems for this platform are too expensive! Installation wasn’t too bad, the fitment was just tight. It took around an hour and a half total for the intake
Got it on sale for Black Friday! Only reason why I went 034 Motorsport, plus the sounds with a K&N is a little obnoxious since it doesn’t have an intake cover, in my opinion haha
@Nick Dunn I'm not talking about the whole kits you could have bought the filter pack. It's bigger than stock. So it makes a nice sound to it. Anyways. Carry on.
Sounds good. Just got my 034 resonator delete. Hoping it sounds just like this. Already got my intake and lowering springs. Time to do the delete n put my vorsteiners on
Nice build man! I was thinking about getting the lowering springs sometime in the future
Looks so clean
Appreciate it!
Not bad man, and still kept warranty
Hi bro, do you have a photo of the front res you removed, I’m doing the same mod
aye but chick double cheeked up at 2:03
You don’t get a check light when you removed the down pipe bro?
I didn’t remove the downpipe, only the first resonator was removed! You shouldn’t get a CEL as long as you don’t touch the catalytic converter.
I need this sound for my Audi as well it’s too silent
Was it the p34 cold air intake
where did you get the black AUDI logo thank you
I plasti dipped the OEM ones black!
Do you have to cut pipes and weld to delete the resonators? Because I wanna do what you did but want to keep the factory parts as is.
Yes! The resonator will have to be cut off. You do not necessarily have to weld on new piping though, new piping can be secured with a clamp which is what I did.
Do you honestly like the res delete? I'm debating. I don’t really care for the raspy DSG farts. I don't know if its better in person.
Yes I do! I think it’s the best cheap option to add some noise to the exhaust, the larger diameter intake also helped even out the exhaust sound
@@nickdunn7003 hmm yeah I go back and forth on it. if you had to pick one, res delete or intake, which would you pick?
@@boostseason Great question! Tough choice but I would have to say intake, in my opinion, nothing can beat turbo spool and enhanced engine noise. Especially since it is difficult to make a 4 cylinder engine with a DSG transmission sound decent
@@nickdunn7003 yeah I’m leaning towards just an intake for now. how was it to install? and you’re right, it’s hard to make 4 cyl’s sound good. the Milltek resonated exhaust sounds good (videos on youtube), but it’s $1,900…
@@boostseason yeah exactly my problem haha, all the exhaust systems for this platform are too expensive! Installation wasn’t too bad, the fitment was just tight. It took around an hour and a half total for the intake
Should of went with CTS turbo intake, ecs high flow cat with 3 inch down pipe
I heard bad things about the CTS intake. It also doesn’t have a heat shield covering the entire intake which increases IAT.
are those calipers painted or covers?
Came stock painted red with the car!
Hate to bust your bubble but getting a k&n filter makes the same sound as that intake you have... could have saved some $$$
Got it on sale for Black Friday! Only reason why I went 034 Motorsport, plus the sounds with a K&N is a little obnoxious since it doesn’t have an intake cover, in my opinion haha
@Nick Dunn I'm not talking about the whole kits you could have bought the filter pack. It's bigger than stock. So it makes a nice sound to it. Anyways. Carry on.
@@MrRtHemiyou sure it makes such a big difference over stock?
Did you remove all the resonators?
No! Only the first one from the downpipe
@@nickdunn7003 Is there a drone while doing cruising at a high speed? Debating whether or not to get it done or not
@@mohammedmiah2431 no drone at all! Sound is stock up until around 2500-3000 RPM, I would recommend it as a cheap way to get some sound
@@nickdunn7003 Okay thank you, you need to make more videos of the beast
@@mohammedmiah2431 no problem! I’ll try my best haha
how are you getting the pops?
I’m just letting off the gas around 2-3k RPM in 1st & 2nd gear!
The pops between shifts are “DSG Farts” and are a result of the dual clutch transmission
Its a 4 cylinder?
Yes! 2.0T
What’s the the stock bhp on this? Just got my resonator deleted on the b9 sounds wicked and sounds stock in the cabin no drone exactly what I wanted