You all asked for it in the poll so here it is! Hopefully you enjoy the video :) I apologize for missing this during the initial setup, but I do touch on it after the setup has run: you need to clear out the 1 block in the middle of the circle all the way to bedrock due to a buggy interaction with the mechanical drill & rope pulley when it descends 1 y-level at a time.
If you are building this on 1.17/1.18 be aware that the adjustable repeater got replaced by something called Pulse Extender. Just place them instead of the adjustable repeater (set the same timings) and everything should work as before
The issues I had when making this (with a newer version of Create): 1. Magma powered fans not a thing anymore. 2. Adjustable Repeaters are not a thing anymore. Solution (for me): 1. Windmills attached straight into the gearboxes that the fans were connected to. For the power going into the Clutch for the Mechanical Bearing I did not want the windmill pointing down, so I used Encased Chain Drives instead of the two gearboxes there to have my windmill sticking out to the side. (My sails for both windmills are 8 long (direction the windmill bearing's sticky side is) by 3 wide. 2. Pulse Repeaters suffices as a replacement. Woohoo! New problem! The machine doesn't work at all! Don't worry, I managed to fix it to work with the current version of Create. 1. Instead of 3 second delay on the Pulse Repeater that goes into the link that makes the 'arm' spin around, I had to use a 5 second delay (to match the speed of my pulley lowering). 2. The redstone contact, instead of having the Redstone link (redstone block, redstone block) sit directly on top of it, I placed redstone dust and going in on the glass arm I added: Pulse Repeater (1 second delay) into the redstone link (redstone block, redstone block). This now works for me in the current version of Create! Decided to post this for future viewers struggling to make this amazing cylinder machine!
This ^, and I also put a delay on the sequenced gearshifter of about 30 seconds after descending 1 block. There was a timing issue with the redstone links and they would trigger while it was running for me and then proceed to descend 1 more block before digging and screw everything up.
Built this in my Create Above and Beyond world after remembering that you made this video and worked like a charm, though I did have to work around the exploding Stella Arcanum ore xD
Oh gosh how I miss BuildCraft. The series on it was so much fun and so popular, but the dev decided to not port the robots, which made up majority of the mod content :(
After i saw this video i saw that you didnt need to power every single drill u come across, I used to power drills using an absurdly long line of water wheels ;-;
Oh gosh, yea thats the benefit of using contraptions for drills/harvesters/saws/etc. They get the power they need from the speed the contraption is moving at and not direct rotational power.
For the next video I would like to see some defense systems , there are many blocks that can be used and there are no videos about it. I'm planning a survival modpack based on create
A really good one is just strong fans with nozzles. If you get a few full power windmills you can power a pretty large perimeter with a pretty good speed. You can sometimes power through it, but mobs won't even get close to passing it.
Unfortunately the encased fan and magma block trick has been removed from create so this design doesn't work the same as it used to, however it can be fixed by using windmills instead of encased fans on the drill head and a water wheel at the top. If you're thinking about building one of these, the pros and cons are not horrible but not great either. This is one of the more lag friendly create quarries and one of the cheaper quarries to build due to the low number of drills compared to the high mining volume, but this is also an extremely slow quarry and the redstone tends to be destroyed if it encounters water or lava above the bedrock layer, meaning you have to babysit it while it runs so you don't come back to find out that it has hit a water source block at Y=50, broke itself, and stopped running without collecting any useful resources. That being said, you can make this quarry 2x to 4x faster by making the row of drills go in both directions or even adding 4 "spokes" of the quarry compared to 1, although this doesn't fix the water/lava problem.
I believe you could! You would need to make sure everything in the top section is glued together too prior to attaching it to a minecart contraption though.
Hey Rage, I really love your design, but I did notice if it comes in contact with water before the lower y levels, the circuitry on the bearing tends to break. Other than that, great design!
What if you did a design with both the mechanical bearing and rope pulley at the top? For instance have the mining arm attached directly to the pulley which lowers the arm and then have the bearing spin the pulley and the arm. That way both mechanisms don't move from their initial position and can be powered easily with something super fast if you want, and redstone would be simpler and locate exclusively at the top, so you wouldn't have to worry about water or lava ruin it.
Yeah, I noticed some other problems too. It got confused after being unloaded, and upon stop, the arm was on the other side, breaking the machine. I got it working again with a hand crank, but had to replace linkers, levers and the magma block on the arm.
Maybe this is way too nitpicky, but adding more drills isn't exponential, it's quadratic since the number of items collected is proportional to radius squared :P
Did works perfectly, except I did have to clear out the senter block. Clever use of Create components. I would love Create become standard in Minecraft.
Yea the center block bug with the drill is such a shame since it makes it a lot more annoying to setup than it otherwise would be, but im glad it worked out for ya after dealing with that!
did you manage to get this working? the redstone doesnt seem to be quite right for me, and im sure i did the same as the video eddit, it seems to work fine if you add a pulse extender before the redstone-stone emiter.
@@mynameisblankmynameisblank1988 Where exactly did you put it? I managed to get it working by putting in two pulse extenders, one each behind each pulse repeater.
I think I did something similar. I also added a T-flop so that it would do two passes before lowering, as I saw some problems that came from it missing three particular blocks. Unrelated, but adding this for anyone else who is troubleshooting, it will break if the center portion goes under water. you can prevent this by gluing two glass blocks to the non rotating part of the drill, covering the exposed sides of the redstone switch. this makes it immune to water, and since it can mine obsidian, if the thing is kept submerged, it will be capable of going through anything.
Would love to see a revisit to this... I just can't seem to get it working at all. Tried replacing the fans with Windmills, and the whole thing just jams up.
i just built this on my modded survival! it works great. But one of the mods (i made that mod that i am gonna be talking about now) has a very OP ore, that spawns EVERYWHERE and it drops 9 per ore, so i had to add more storage.
Haha yea, I could see that being a weeeee bit of a problem! Granted there are worse things in the world than "Oh my gosh I cant hold all these ores my machine is getting me" ;) #ModdedMCProblems
For those trying to build this in newer versions i found you will have to make a few modifications, im sure you could probably make this better with less components but here's what i did. In newer versions of create, adjustable repeaters do not exist, so you will need to swap them out for pulse repeaters. Firstly change the pulse repeater (formerly adjustable repeater) firing into the redstone stone redstone link from 3 seconds to 5 seconds. Next, you will need to replace one redstone dust with another pulse repeater facing into the sequenced gearshift and set the delay to 1 second. ( at 19:09 you can see where this is, directly to the left of where you can place the lever, leaving you with a central redstone dust) . The last modification you will need to make, is to add one more pulse repeater behind the powered latch that is facing into the clutch and then add the recieving redstone link on the frequency of 2 redstone blocks ( as you are looking at your clutch, you should see the blocks in this order: redstone link, pulse repeater, powered latch) Hope this helps (this works for me in 1.18.1, havent tested this in anyother version) .
Actually no. All you need to do is to replace the adjustable repeater for the Pulse Extenders (which are literally just a new version of the adjustable repeater). Same timings and setup and everything should work fine as before
@@n.p.8055 actually it doesn't. the timed repeaters would stay on for as long as the input was on. however the pulse repeaters appear to just send one brief signal no matter how long the input Redstone is on. hence the name pulse repeater. and they don't send another pulse until the input is turned off and back on.
You can also throw a filtered chute underneath one of the chests and have the quarry drop the dirt and cobblestone you may not want, while keeping all the valuables. It'd allow you to have fewer chests if you wanted, though they are cheap enough to include anyway.
You absolutely could! I considered doing this but felt a lot of people wouldnt, like Chao said, take into account the fact that it could cause lag on servers as it just spits items out all over the ground. If lag is no concern though, that is an easy way to cut down on useless blocks in the storage!
This is basically mandatory after the caves and cliffs update since the world is now 60 blocks deeper than it was at the time of filming. If you don't throw out the cobble, dirt, deepslate, etc then the chests will fill up long before it reaches bedrock
I had tried to fix this, rebuilt twice, only to find my issue to be a rotational one..... I can't urge enough but note @18:57 the right pulse extender must be rotated or placed correctly. A noob mistake but it made what should of been an hour build which turned into 4+ hours..... I also extended it longer then the OP which caused some issues with missing blocks now and then. So I made mine wider. So far, 3 layers, no issues.
i made mine 100 drills from the middle and i think i need to recreate this design using minimum windmill because the fan goes way to fast the further out it goes meaning it skips the blocks and even with 500 drills that didnt help so yeah needs to just go slower
me is first! i have never been first Edit: Now that me has secured my first place i can watch the video :D i was literally checking to see if there is an episode i missed lol
Great design! I do something similar, but the drills are on the side and it doesn't auto-lower because I build it underground to hopefully get the good ores only.
So I can't get this to work. The last 5 drills don't break the blocks directly under them before it starts rotating. And then when it comes back around, the drills are off while the contraption tries (and fails) to lower. And it is unreasonably slow. It would take less time to just mine for materials and make a digital miner from mekanism, or to just lower the drills straight down instead.
cant seem to get it to work in 1.18. they changed the timed repeaters to pulse repeaters and they don't constantly stay on anymore. what's a way around this? I tried pulse extenders but cant seem to get it fine tuned and it keeps lowering without turning.
I'm a little suspicious that such a gigantic quarry covering multiple chunks, only collected 8 diamonds... I wonder if there's a bug with the drills being too far away from the player or something that causes the diamonds to get deleted somehow? I notice an extreme lack of diamonds from my quarries as well. An area that size would certainly have more than 8 diamonds in it.
@@chronovortex6495 they do collect them, every now and then, very rarely. But that's the issue, they barely ever do. I noticed the only time I got diamonds was when I rode the quarry down and watched it pick them up.
Is it possible to rig up a way to empty the chest(s) when it stops and then when it lowers it uses deployers to build a way to send the items back up? Like place chutes?
On Direwolf 20 on 1.18 and cant get this to work. Just doesnt want to function. i double and triple checked everything is connected correctly, and even re built multiple time
My quarry has the ussual of going down one block, mining the first row, then going down another block without having gone the circle, resulting in skipping a layer. Ive been on this issue for 2 days now
Sucks because I finally got mine working properly, and now it won’t collect and ores besides coal. And some how mining down a mountain it managed to cooled to iron leggings and some red glass and some windows. And I didn’t leave or use any of that around the quarry lol Any ideas about how to get it to collect the ores it mines
I tried to cheat and just hop into your world and get the schematic for this... but it was broken.... and I have no idea how to fix it... I know its missing a block and its set in the wrong position but I couldn't figure it out... ended up building it block by block anyways :P
You could theoretically glue the entire top portion of the setup together too and then slap down a cart assembler below part of the stone platform and pick it all up and move it using a minecart contraption.
I did something like that for my own contraption, I usually just place it high up so it doesn't matter what the terrain is, another handy thing to do is making a contraption to clear out a small layer near the nether roof, this would allow you to just pop down your quarry in the nether for free materials
Would it work if we put an brass funnel down there to drop cobblestone away ? You know, why would we need more cobblestone if it's passively produced. Same as gravel, sand, limesand and limestone (in my case)
If you doubled your drills rigs and ran them in both directions from the center, you could mine it in half the time without adding any stress capacity, right?
By that same token, you could do it in all 4 directions. As long as you had the redstone connection at the end of each one, I don't think there's any reason you couldn't. The resource cost of doing that is pretty high for a single quarry though, so it's probably not worth it unless you plan on moving it around with a minecart assembler.
@@DaneMorgan This is true, but with how slow the 1-arm version goes and with how few resources it would take, it's not a big investment if it's set up for a one-time-use and then recycled into other builds (like an iron generator). Setting up a 4-arm version is pretty much committing to the reusable quarry. But yes, if you have the resources might as well max out power/efficiency!
@@michaelkennell2420 Yeah, i just know myself well enough to know that as soon as I took it down, I'd be like, man I need another hole and I'd have to set it back up again.
I'm not sure if it'll meet power demands, but I always use a windmill. Place down the windmill bearing (or whatever it's called) and stack 8 sail blocks in a tower on top of it. It'll spin very slowly, but the more sails you add the faster it will spin. The bearing is cheap, and so are the sails. Hope that helps!
@@miltonexequielquaranta2630 I didn't realize that the power source was on the quarry itself, spinning with it. I'll look into it, it shouldn't be too complicated
@@miltonexequielquaranta2630 from all I could come up with, you would build the windmill just to the side and connect it through using vertical gearboxes where the fans would have been. This goes for both the windmill powering the pulley system and the windmill powering the bearing. The windmill powering the bearing should start automatically when the pulley stops moving, you just have to make sure you glue everything together (sails shouldn't have to be glued however)
The quarry goes down for a few blocks and then stops going down and just goes round an round (I’m in version 3.2) If anybody could help me please, thank you
I mostly try to stick to the mod itself if there is a way to use it for the same function, but if theres no way around it I have no issue with vanilla mechanics. Ive used various vanilla timers many times in the past during the series when the mods have no helpful redstone additives :)
We have run into the same problem we used pulse repeaters and it didnt work but with pulse extenders it did work, it just does mine the blocks underneath the redstone contacts when they touch
The windmill would have to be completely superglued to the mechanical bearing, so it can be moved, I wouldn't recommend it but if you want to try be my guest.
@@mynameisblankmynameisblank1988 it doesn't, the sequential gearshift no longer waits for the rope pulley to actually go down the requested amount of blocks it works for a little while on input speed, then gets stuck if it has to mine iron ore or above while going down
@@catgirlQueer I'm not sure how best to explain it, but I got it working well enough to not need to be observed. I will try to just list the flow of signals. Let me know with any questions for reference, I'm calling redstone block-redstone block: signal 1, and redstone block-stone block: signal 3. (i had to add another signal to help with timing, signal 2) Redstone contact->signal 1 emitter signal 1 receiver->pulse extender @ 10sec pulse extender->pulse repeater @ 2tic pulse repeater->pulse extender @ 5tic pulse extender-> T-flop (th-cam.com/video/F1kccbLmgHQ/w-d-xo.html) T-flop -> pulse repeater this pulse repeater goes to three things, all by redstone dust ->signal 2 emitter, which is then received as the inhibitor signal on the non-rotating part of the drill (originally a redstone-redstone receiver) ->pulse repeater@ 2tic -> sequenced gearshift ->pulse repeater @5sec->pulse extender @18tic-> signal 3 emitter I would also recommend gluing glass to cover the two exposed sides of the powered latch that signal 2 connects two, as that makes the rig waterproof
@@catgirlQueer do you mean that the drills do not mine out fully, and the rope cannot lower as a result? i had some problems with that, but thats why I added the T-flop. it makes the drills do two passes, so they cant miss any blocks which would keep them from lowering
You all asked for it in the poll so here it is! Hopefully you enjoy the video :) I apologize for missing this during the initial setup, but I do touch on it after the setup has run: you need to clear out the 1 block in the middle of the circle all the way to bedrock due to a buggy interaction with the mechanical drill & rope pulley when it descends 1 y-level at a time.
you can put brass funnel next to chest,and use attribute filter on it.so you can throw stone or other trash out of chest
and i don't know why when i'm playing mod server with my friend.when tree farm's tree touch middle block of the moving machine ,the server will crash.
Do you have an updated version for 19.2
If you are building this on 1.17/1.18 be aware that the adjustable repeater got replaced by something called Pulse Extender. Just place them instead of the adjustable repeater (set the same timings) and everything should work as before
Thank you
Goat
@@rigandigy2329 fax
i think it's pulse repeater
those are two different things. pulse extender extends the pulse the moment it goes through until it leaves for the requested time
The issues I had when making this (with a newer version of Create):
1. Magma powered fans not a thing anymore.
2. Adjustable Repeaters are not a thing anymore.
Solution (for me):
1. Windmills attached straight into the gearboxes that the fans were connected to. For the power going into the Clutch for the Mechanical Bearing I did not want the windmill pointing down, so I used Encased Chain Drives instead of the two gearboxes there to have my windmill sticking out to the side. (My sails for both windmills are 8 long (direction the windmill bearing's sticky side is) by 3 wide.
2. Pulse Repeaters suffices as a replacement.
Woohoo! New problem! The machine doesn't work at all! Don't worry, I managed to fix it to work with the current version of Create.
1. Instead of 3 second delay on the Pulse Repeater that goes into the link that makes the 'arm' spin around, I had to use a 5 second delay (to match the speed of my pulley lowering).
2. The redstone contact, instead of having the Redstone link (redstone block, redstone block) sit directly on top of it, I placed redstone dust and going in on the glass arm I added: Pulse Repeater (1 second delay) into the redstone link (redstone block, redstone block).
This now works for me in the current version of Create! Decided to post this for future viewers struggling to make this amazing cylinder machine!
This ^, and I also put a delay on the sequenced gearshifter of about 30 seconds after descending 1 block. There was a timing issue with the redstone links and they would trigger while it was running for me and then proceed to descend 1 more block before digging and screw everything up.
hey so does your windmill pass through the clutch/contraption? or is it a windmill that's oriented like a waterwheel?
@@elliottdresser9734 It's been a while but I think I just expanded the windmill in one direction where it would fit
This is 3exactly what I've been trying to make for me and my friends base. Thank you bro!
No problem! Hopefully youre able to put the design to good use :) !
Built this in my Create Above and Beyond world after remembering that you made this video and worked like a charm, though I did have to work around the exploding Stella Arcanum ore xD
It's like the good old days, with Buildcraft :D
Nice one :)
Oh gosh how I miss BuildCraft. The series on it was so much fun and so popular, but the dev decided to not port the robots, which made up majority of the mod content :(
@@RagePlaysGames Well... i have never realy play with the Robots ^^;
For me, BC was always: Pipes and Quarry :D
After i saw this video i saw that you didnt need to power every single drill u come across, I used to power drills using an absurdly long line of water wheels ;-;
Oh gosh, yea thats the benefit of using contraptions for drills/harvesters/saws/etc. They get the power they need from the speed the contraption is moving at and not direct rotational power.
I’m sorry
For the next video I would like to see some defense systems , there are many blocks that can be used and there are no videos about it. I'm planning a survival modpack based on create
I can always add that to the list of things to do before the series wraps up!
@@RagePlaysGames okay thanks, didn't know you have already a list of things planned ;)
Would be interesting to see various uses of Create for anti-mob defences (regenerating Cactus walls, Golem spawners, etc.)
A really good one is just strong fans with nozzles. If you get a few full power windmills you can power a pretty large perimeter with a pretty good speed. You can sometimes power through it, but mobs won't even get close to passing it.
@@RagePlaysGames I have seen a design of a trebuchet using this mod once but unfortunetly it does not have the capability to yeet things :I
Another amazing video man! I don't know how you don't have like 300k subs yet.
Unfortunately the encased fan and magma block trick has been removed from create so this design doesn't work the same as it used to, however it can be fixed by using windmills instead of encased fans on the drill head and a water wheel at the top.
If you're thinking about building one of these, the pros and cons are not horrible but not great either. This is one of the more lag friendly create quarries and one of the cheaper quarries to build due to the low number of drills compared to the high mining volume, but this is also an extremely slow quarry and the redstone tends to be destroyed if it encounters water or lava above the bedrock layer, meaning you have to babysit it while it runs so you don't come back to find out that it has hit a water source block at Y=50, broke itself, and stopped running without collecting any useful resources. That being said, you can make this quarry 2x to 4x faster by making the row of drills go in both directions or even adding 4 "spokes" of the quarry compared to 1, although this doesn't fix the water/lava problem.
Can you redo this for .5, you cant use encased fans for rotation, amd parts were renamed.
I think wind power would suffice
@@MetrozTrott Wind power works, even the minimum wind power is more than enough. For the pulley power you can also set up a basic water wheel
Glad this series hasn’t ended yet!
Its still got some fuel left in the tank :) its now my longest running series and unfortunately it will be coming to an end soon, but not just yet!
@@RagePlaysGames glad you won’t be forcing yourself past burnout, really love everything you’ve done in the world
Couldn't you stick it on a minecart so you could pick it up and move it somewhere else?
After you pull it up, you probably could. At least the chests and everything super-glued onto them.
I believe you could! You would need to make sure everything in the top section is glued together too prior to attaching it to a minecart contraption though.
Hey Rage, I really love your design, but I did notice if it comes in contact with water before the lower y levels, the circuitry on the bearing tends to break. Other than that, great design!
What if you did a design with both the mechanical bearing and rope pulley at the top? For instance have the mining arm attached directly to the pulley which lowers the arm and then have the bearing spin the pulley and the arm. That way both mechanisms don't move from their initial position and can be powered easily with something super fast if you want, and redstone would be simpler and locate exclusively at the top, so you wouldn't have to worry about water or lava ruin it.
Yeah, I noticed some other problems too. It got confused after being unloaded, and upon stop, the arm was on the other side, breaking the machine. I got it working again with a hand crank, but had to replace linkers, levers and the magma block on the arm.
Maybe this is way too nitpicky, but adding more drills isn't exponential, it's quadratic since the number of items collected is proportional to radius squared :P
Nerd
(In all seriousness though exponents and quadratic are basically the same when you ignore negative inputs.)
Same thing literally
Literally not the same, expo == n^x, quadratic == x^n where n is a constant, expo grow muuuuuch faster than quadratic
@@porigonopop bruh I fuvkin know but a quadratic is an exponent
@@PUKASSS a quadratic has an exponent ( namely, 2) an exponential *is* the exponent. Antoines comment clarifies it really, really well
Did works perfectly, except I did have to clear out the senter block. Clever use of Create components. I would love Create become standard in Minecraft.
but it wouldn't make minecraft be minecraft... I think this is fine to be a Mod rather than it being implemented into the game fully
Yea the center block bug with the drill is such a shame since it makes it a lot more annoying to setup than it otherwise would be, but im glad it worked out for ya after dealing with that!
Here you go everyone:
17 mech drill
2 redstone contact
5 Redstone link
2 Pulse repeater
1 powered latch
2 redstone dustone
2 magma block
2 encased fan
1 block of redstone
2 lever
31 chests
3 vertical gearboxes
1 mechanical bearing
1 clutch
1 rope pulley
1 sequenced gearshift
64 glass
64 stone
10 ladder
1 button
1-2 super glue
did you manage to get this working? the redstone doesnt seem to be quite right for me, and im sure i did the same as the video
eddit, it seems to work fine if you add a pulse extender before the redstone-stone emiter.
@@mynameisblankmynameisblank1988 Where exactly did you put it? I managed to get it working by putting in two pulse extenders, one each behind each pulse repeater.
I think I did something similar. I also added a T-flop so that it would do two passes before lowering, as I saw some problems that came from it missing three particular blocks.
Unrelated, but adding this for anyone else who is troubleshooting, it will break if the center portion goes under water. you can prevent this by gluing two glass blocks to the non rotating part of the drill, covering the exposed sides of the redstone switch. this makes it immune to water, and since it can mine obsidian, if the thing is kept submerged, it will be capable of going through anything.
mine stops after making one rotation and wont mine the middle block
Would love to see a revisit to this... I just can't seem to get it working at all. Tried replacing the fans with Windmills, and the whole thing just jams up.
Needs to be adjusted for .4. I replaced the adjustable repeaters with a pair of pulse repeaters and pulse extenders each.
What timing you put on them the pulse and extender ?
i just built this on my modded survival! it works great. But one of the mods (i made that mod that i am gonna be talking about now) has a very OP ore, that spawns EVERYWHERE and it drops 9 per ore, so i had to add more storage.
Haha yea, I could see that being a weeeee bit of a problem! Granted there are worse things in the world than "Oh my gosh I cant hold all these ores my machine is getting me" ;) #ModdedMCProblems
For those trying to build this in newer versions i found you will have to make a few modifications, im sure you could probably make this better with less components but here's what i did. In newer versions of create, adjustable repeaters do not exist, so you will need to swap them out for pulse repeaters. Firstly change the pulse repeater (formerly adjustable repeater) firing into the redstone stone redstone link from 3 seconds to 5 seconds. Next, you will need to replace one redstone dust with another pulse repeater facing into the sequenced gearshift and set the delay to 1 second. ( at 19:09 you can see where this is, directly to the left of where you can place the lever, leaving you with a central redstone dust) . The last modification you will need to make, is to add one more pulse repeater behind the powered latch that is facing into the clutch and then add the recieving redstone link on the frequency of 2 redstone blocks ( as you are looking at your clutch, you should see the blocks in this order: redstone link, pulse repeater, powered latch)
Hope this helps (this works for me in 1.18.1, havent tested this in anyother version) .
Actually no. All you need to do is to replace the adjustable repeater for the Pulse Extenders (which are literally just a new version of the adjustable repeater). Same timings and setup and everything should work fine as before
@@n.p.8055 actually it doesn't. the timed repeaters would stay on for as long as the input was on. however the pulse repeaters appear to just send one brief signal no matter how long the input Redstone is on. hence the name pulse repeater. and they don't send another pulse until the input is turned off and back on.
@@levistrnad2965 welp I used pulse extenders and everything worked as intended so i guess you are [probably] wrong
what should the pulse repeater firing into the latch be set to?
@@levistrnad2965 The same as the adjustable repeaters were set on this video
Hey! For Create 0.5 they removed the ability for the fans to generate power. Any chance of an updated version using windmills or some such?
You can also throw a filtered chute underneath one of the chests and have the quarry drop the dirt and cobblestone you may not want, while keeping all the valuables. It'd allow you to have fewer chests if you wanted, though they are cheap enough to include anyway.
This could be bad on an Server. Because eache Item will stay on the Ground vor 5 Minutes....
Vor this, you should ad an Cactus :)
You absolutely could! I considered doing this but felt a lot of people wouldnt, like Chao said, take into account the fact that it could cause lag on servers as it just spits items out all over the ground. If lag is no concern though, that is an easy way to cut down on useless blocks in the storage!
This is basically mandatory after the caves and cliffs update since the world is now 60 blocks deeper than it was at the time of filming. If you don't throw out the cobble, dirt, deepslate, etc then the chests will fill up long before it reaches bedrock
Baring dirt, you can put everything through your ore processing system and reap a major profit
Oh absolutely! Leaving with 6+ stacks of iron is nice, getting to 2.2x that is even nicer lol.
Would absolutely love to see you do something with Nixie Tubes!!!
Id be tempted to do a video on them and do some form of automated sign before the series ends :)
I had tried to fix this, rebuilt twice, only to find my issue to be a rotational one..... I can't urge enough but note @18:57 the right pulse extender must be rotated or placed correctly. A noob mistake but it made what should of been an hour build which turned into 4+ hours.....
I also extended it longer then the OP which caused some issues with missing blocks now and then. So I made mine wider. So far, 3 layers, no issues.
i made mine 100 drills from the middle and i think i need to recreate this design using minimum windmill because the fan goes way to fast the further out it goes meaning it skips the blocks and even with 500 drills that didnt help so yeah needs to just go slower
me is first! i have never been first
Edit: Now that me has secured my first place i can watch the video :D i was literally checking to see if there is an episode i missed lol
What's up Lash! ✌️
@@aditya_lord_of_darkness ah. me sees that you are early too Aditya :D we should be the early gang here :)
HI LASH
Every time I comment on a Lash video: 😁
Every time Lash comments on my video: 😁
How would I hear up the encased fan to make it faster
Nya~ hope you guys have a great day and no idiot tries to make you suffer nya!
Hope you have an amazing day too Neko
@@RagePlaysGames :3
Am I the only one who was kinda hoping he was going to fall into the pit? XD
Sweet video. Could use an update with vaults, and maybe automatically unload the system.
Pls for the sequended gearshift what i have to do? the pulley continues to lower the machine
I would have went for a 4 arm design it's a little more effective and efficient than a single arm
if you have futurepack u can use composite chest to get an extra 2 rows of slots for more stacks per chest
Great design! I do something similar, but the drills are on the side and it doesn't auto-lower because I build it underground to hopefully get the good ores only.
So I can't get this to work. The last 5 drills don't break the blocks directly under them before it starts rotating. And then when it comes back around, the drills are off while the contraption tries (and fails) to lower. And it is unreasonably slow. It would take less time to just mine for materials and make a digital miner from mekanism, or to just lower the drills straight down instead.
did you ever figure it out? habing the same problem
You have a ludicrously low sub count for the pure QUALITY of your videos
Your FOV!!!!
can you please give me a download link to the schematic?
i cant make it work :(
cant seem to get it to work in 1.18. they changed the timed repeaters to pulse repeaters and they don't constantly stay on anymore. what's a way around this? I tried pulse extenders but cant seem to get it fine tuned and it keeps lowering without turning.
they dont have adjustable repeaters anymore, atleast on the 1.18 version any other way to make that part that wont mess it up completely?
its called the pulse extender now
I wish I could make this but in create 0.5 they removed the encased fan's ability to generate rotational power. Anyone figure out a workaround?
you could try a windmill but it'll slow
I'm a little suspicious that such a gigantic quarry covering multiple chunks, only collected 8 diamonds... I wonder if there's a bug with the drills being too far away from the player or something that causes the diamonds to get deleted somehow? I notice an extreme lack of diamonds from my quarries as well. An area that size would certainly have more than 8 diamonds in it.
Ye one of the issues I noticed was that quarries don't seem to be able to collect diamonds. Don't know if this is a bug or a feature tho
@@chronovortex6495 they do collect them, every now and then, very rarely. But that's the issue, they barely ever do. I noticed the only time I got diamonds was when I rode the quarry down and watched it pick them up.
@@ZachTheInsaneOne then it's most likely some bug that stops diamonds from being collected when you're too far away from the drill then.
Is it possible to rig up a way to empty the chest(s) when it stops and then when it lowers it uses deployers to build a way to send the items back up? Like place chutes?
For everyone using the newer create mod version,i wont work as fans are not used for powering other contraptions anymore
how on earth do you use gear reduction to speed up mining. I've tried so many different methods, but they always come back with nothing...
Looks the adjustable repeaters were removed in the latest update.
Any tips for rotation? They removed it
SLOW DOWN SLOW DOWN
How many blocks down the rope pulley extend down?
seems it cant do obsidian, since it cant mine the last obsidian block on the outside since its too slow. I don't know how to fix it
On Direwolf 20 on 1.18 and cant get this to work. Just doesnt want to function.
i double and triple checked everything is connected correctly, and even re built multiple time
10:10 can I use barrels as long as they’re all connected to each other?
My quarry has the ussual of going down one block, mining the first row, then going down another block without having gone the circle, resulting in skipping a layer. Ive been on this issue for 2 days now
Sucks because I finally got mine working properly, and now it won’t collect and ores besides coal. And some how mining down a mountain it managed to cooled to iron leggings and some red glass and some windows. And I didn’t leave or use any of that around the quarry lol
Any ideas about how to get it to collect the ores it mines
When I set this thing going it just started going down and wouldn't stop.
I tried to cheat and just hop into your world and get the schematic for this... but it was broken.... and I have no idea how to fix it... I know its missing a block and its set in the wrong position but I couldn't figure it out... ended up building it block by block anyways :P
I have it working in 1.19.2 If this comment gets enough likes I will do a terrible video on it
If you still remember, does it still work if you make it with this guide or it need some adjustments?
@@tatashie The redstone circuit needs adjustment for the later version the rest of it works fine
@@EverettCars thanks for answer, will try to make it later.
Could you make a 0.5 version?
When I try to do the start up for it, the adjustable repeaters just have a seizure and then the mechanical bearing breaks. Please help rage.
I think it is because this video has an old version of create. Its 0.3.1 while there is 0.3.2
i have the same problem could it be a directional thing, did u manage to fix it?
@@sls9981 nope
Doesn’t work for .4 update sadly
Why you never use Extendo Grip? It's an amazing instrument for building that needs almost nothing.
👍🤨🤔🙂😁
Love your tutorials dude!
How can one move this setup to a new mining spot without dissembling and reassembling?
You could theoretically glue the entire top portion of the setup together too and then slap down a cart assembler below part of the stone platform and pick it all up and move it using a minecart contraption.
I did something like that for my own contraption, I usually just place it high up so it doesn't matter what the terrain is, another handy thing to do is making a contraption to clear out a small layer near the nether roof, this would allow you to just pop down your quarry in the nether for free materials
sadly this doesnt work for me and im unsure as to why
Would it work if we put an brass funnel down there to drop cobblestone away ?
You know, why would we need more cobblestone if it's passively produced.
Same as gravel, sand, limesand and limestone (in my case)
Kamil G more like Kmart G
flatout does not work in 1.20.1, not with any configuration i tried
Is it just me or in 1.19 the fan on top of magma blocks don’t work? Help
The create devs made fans no longer able to generate power in 0.5 update.
@@RagePlaysGames ohh ok thanks
If you doubled your drills rigs and ran them in both directions from the center, you could mine it in half the time without adding any stress capacity, right?
By that same token, you could do it in all 4 directions. As long as you had the redstone connection at the end of each one, I don't think there's any reason you couldn't. The resource cost of doing that is pretty high for a single quarry though, so it's probably not worth it unless you plan on moving it around with a minecart assembler.
@@michaelkennell2420 Ity strikes me that the one arm build is a good candidate for a minecart assembler already. :)
@@michaelkennell2420 Also, i like the way you think. Moar Power.
@@DaneMorgan This is true, but with how slow the 1-arm version goes and with how few resources it would take, it's not a big investment if it's set up for a one-time-use and then recycled into other builds (like an iron generator). Setting up a 4-arm version is pretty much committing to the reusable quarry.
But yes, if you have the resources might as well max out power/efficiency!
@@michaelkennell2420 Yeah, i just know myself well enough to know that as soon as I took it down, I'd be like, man I need another hole and I'd have to set it back up again.
Rage, May i ask, without the lavastone powering the encasing fan, how can i make this radial quarry machine???
I'm not sure if it'll meet power demands, but I always use a windmill. Place down the windmill bearing (or whatever it's called) and stack 8 sail blocks in a tower on top of it. It'll spin very slowly, but the more sails you add the faster it will spin. The bearing is cheap, and so are the sails. Hope that helps!
@@yammantheaardvarkofhonor1242 i have to try how can i put the windmill and make it move with the rotation drills.
@@miltonexequielquaranta2630 I didn't realize that the power source was on the quarry itself, spinning with it. I'll look into it, it shouldn't be too complicated
@@miltonexequielquaranta2630 from all I could come up with, you would build the windmill just to the side and connect it through using vertical gearboxes where the fans would have been. This goes for both the windmill powering the pulley system and the windmill powering the bearing. The windmill powering the bearing should start automatically when the pulley stops moving, you just have to make sure you glue everything together (sails shouldn't have to be glued however)
@@yammantheaardvarkofhonor1242 jajaja that Is what is breaking my head xD
they work on 1.18.1??
damn it encased fan generator doesn't work
Shame this doesn't work anymore
Do train craft and rail raft 1.7.10 next please
The quarry goes down for a few blocks and then stops going down and just goes round an round (I’m in version 3.2)
If anybody could help me please, thank you
Hey Rage! When you play mod packs to make tutorials, do you incorporate vanilla mechanics or stick to the mod behaviors?
I mostly try to stick to the mod itself if there is a way to use it for the same function, but if theres no way around it I have no issue with vanilla mechanics. Ive used various vanilla timers many times in the past during the series when the mods have no helpful redstone additives :)
Does anyone have a fix to get this to work in create 0.4? They removed adjustable repeaters
We have run into the same problem we used pulse repeaters and it didnt work but with pulse extenders it did work, it just does mine the blocks underneath the redstone contacts when they touch
2024???
Can you link the create mod for Minecraft
And you can get the graple hook and link the create mod so we can help you on your vids
Im not gonna lie, this will be my first quarry or automated mining in general! haha
Has anyone tried this with a windmill so it's super fast
The windmill would have to be completely superglued to the mechanical bearing, so it can be moved, I wouldn't recommend it but if you want to try be my guest.
it would seam this design dose not work in v0.3.2d
Day 5 of asking for try galacticraft
does this still work for 1.18 create? I'm gonna try it out anyway but I'd just like to see if anyone else tried it
edit: it does not :c
it does, you just need to have some pulse extendors included before every pulse repetor
@@mynameisblankmynameisblank1988 it doesn't, the sequential gearshift no longer waits for the rope pulley to actually go down the requested amount of blocks
it works for a little while on input speed, then gets stuck if it has to mine iron ore or above while going down
@@catgirlQueer I'm not sure how best to explain it, but I got it working well enough to not need to be observed. I will try to just list the flow of signals. Let me know with any questions
for reference, I'm calling redstone block-redstone block: signal 1, and redstone block-stone block: signal 3. (i had to add another signal to help with timing, signal 2)
Redstone contact->signal 1 emitter
signal 1 receiver->pulse extender @ 10sec
pulse extender->pulse repeater @ 2tic
pulse repeater->pulse extender @ 5tic
pulse extender-> T-flop (th-cam.com/video/F1kccbLmgHQ/w-d-xo.html)
T-flop -> pulse repeater
this pulse repeater goes to three things, all by redstone dust
->signal 2 emitter, which is then received as the inhibitor signal on the non-rotating part of the drill (originally a redstone-redstone receiver)
->pulse repeater@ 2tic -> sequenced gearshift
->pulse repeater @5sec->pulse extender @18tic-> signal 3 emitter
I would also recommend gluing glass to cover the two exposed sides of the powered latch that signal 2 connects two, as that makes the rig waterproof
@@mynameisblankmynameisblank1988 the problem is that the sequenced gearshift itself stops when the drills hit iron ore on the way down
@@catgirlQueer do you mean that the drills do not mine out fully, and the rope cannot lower as a result? i had some problems with that, but thats why I added the T-flop. it makes the drills do two passes, so they cant miss any blocks which would keep them from lowering
Can I use adjustable crates instead of chests ?
this build isnt any good anymore. theres no more adjustable repeaters
ah i cant do it at 1.18.2 :
some one made one side ways :D
Beware this build is currently outdated as you can no longer generate rotational force with a magma block and fan.
I'm still able to get this working
I am first
Looks like Lash had ya beat on that one by a bit ;)
I am Indian ,I don't know enough English 😅
But u has commented me I am lucky :)
it doesn't work on 0.5 your design is outdated
Yep, that’s why the title says 0.3.1 :P
@@RagePlaysGames yep that's why i said it's outdated :P