Blackhorse L-39 Albatros 90mm Steering mod, setup and flight
ฝัง
- เผยแพร่เมื่อ 14 ต.ค. 2024
- Informational video and setup for the Blackhorse L-39 Albatros.
Informational video and setup for the Blackhorse L-39 Albatros.
90mm Wemotec fan
Hacker 1430kv motor
(2)-Amiral pro 5s 4000mAh lipo’s in series(10s)
ZTW Mantis 150A
(1)- 2s Spektrum Smart RX lipo 2000mAh
(1)- Freewing 17g servo positive 360mm for steering servo
(7)-Hitec HS-5245MG
Spektrum AR10360T receiver
Retracts motion RC
(1)-50mm JP front wheel
(2)-55mm JP main’s
Original struts
Such a wild place to fly! So many potential hazardous obstacles!
😅
Awesome bro!!! Sounds phenomenal!! Great flight and landing!!
Thanks my brother! I am loving this jet for sure!
Great flight! That setup for the front steering is on point!! 🙌🏼
Thank you! Butter smooth steering and suspension. She Feels like a Cadillac while taxing down the runway. Definitely a daily flyer💪👊
Clean setup man!
Good solution to the crap front steering arrangement that it comes with. I changed it by not looping the steering back on itself and not using wire which gets a bend "memory" when u turn it back so sharply on itself. I also used 70 kilo fishing line (not the wire) and crimped it directly to the servo arm and steering arm. Your solution is great but I fear that one harsh landing could push the retract and metal steering arm back into your clevises and through to the steering servo& servo arms.
This is what I want to make my next project WATCHING YOUR EVERY MOVE :) What does the 2 battery do? Is it for the control sufaces and lights?
Hello from Germany, great Video. I have the same Plane, the Version2. Can you tell me which Size your Pilots are?
Did you need to add any elevator mix with the flaps? Did the factory 111mm CG feel good? I'm close to my maiden on this plane, thanks!
Awesome my friend! I have no mix on the flaps. It stays level when you deploy. I think I set 3 sec slow deployment on the flaps. One thing I will highly recommend is setting your elevator to the recommended on high rates. Trust me on this ☝️. I always put a little extra elevator on all my models. She didn’t like the extra elevator at all. I also recommend changing the wing spar to carbon fiber. I have mine almost recommended cg. My nose tips down 1-2” on the recommended cg. So very slightly nose heavy. She will just float up on take off. Good luck on your maiden. She is a daily flyer!☝️💪👊
@@comeflywithmerc
I have a little extra Elevator mixed in but I’ll take it out. I think the book says 12mm on high rate.
@@dsmithwc04 she will go into a stall spin. I bent the aluminum spar and unglued the brackets that hold the wings on. Please watch my video when you have a minute.
th-cam.com/video/usYfrJ4pLBk/w-d-xo.html
@@comeflywithmerc Wow, thanks for sharing. Where did you source the carbon tube? Did you end up putting epoxy in the wing?
What nose gear is that? Brand, model # pls
Rm400-90 retracts