Hello Mayuko, I have only just happened upon your channel and what a boon! beautiful design and finish well done to you and thanks for sharing. The dark wood reminds of black walnut, and whatever it is it looks great. regards, Tony (UK)
The average viewer looked at the end result. The woodturners looked at the table saw stop block, the angled drop away for the segments that allow quick production without kickback, the alternating flipping after each cut, the homemade two screw and bolt system for the glue drying press, the skilled use of only a rounded carbide even when roughing!, the premade flat bottom that did not rely on tooling, the odd looking skew, the use of a square block on the tail stock and the lack of sanding and the simple but elegant finish. Which likely is just a food grade oil? My only real questions are. What were the lengths of your 45 degree segments per ring? Also what was the width of your divider shims? There is so much beauty and knowledge in this video beyond what the bowl looks like. Thank you!
Thank you very much for the suggestions, criticisms and input, yes it is true I realized long before that I reversed only with carbide, but for now, that's all I can do, using a bowl gouge is not easy, I reversed in less than 1 year and still have a lot to do learning, I still have a lot to learn about turning wood, but most importantly I can produce a masterpiece and can entertain many people with my videos, 11cm long and 4cm wide per ring, with an initial diameter of 28cm
@@mayukowoodturning7644 you misunderstand. I was not criticizing. I was complimenting. Lots of men have big garages and expensive tools and they cannot create half of what you make. I was expressing admiration at your ingenuity.
@@The_Conqueeftador ooh thank you very much for your compliment, sorry I misunderstood because sometimes google translate makes me misinterpret sentences, I am happy and enjoy this work, greetings from Indonesia.. 🙏🙏
@@mayukowoodturning7644 I was asking about just the trapzoid shaped segments. They had to increase in length for each ring correct? That is why your rings get bigger and bigger. I was asking How much length did you add to the individual trapzoids per ring. Was there a formula?...Example: 1inch -> 1.5 inch-> 2 inch-> 2.5 inch, etc. etc.
@@The_Conqueeftador Yes, that's right, it will definitely make the ring bigger, the initial length of each segment is 11 cm and the final result is 9 cm, the initial width is 4 cm and the final result is 1 cm, the initial diameter is 28 cm and the end result is 26 cm.
Hello Sir. Beautiful bowl. Can you please tell me more about the chisel you are using. It seems as this one of yours is much easier to use than the traditional bowl gouge.
Wow, very , very nice work!
Thanks 🙏🙏
Oh wow wow wow wow!!!! The wood grain the bowl everything about this bowl is magnificent and spectacular. It is stunningly beautiful.
Thank you very much...🙏
Outstanding.
Enjoyable video. Thanks for posting.
Thank you Big mike for watching my video hope you enjoy.. 🙏
This is a perfect blend of elegant shape, geometrical design and harmony of colours. I simply love it!
Thank you so much Renate, you always pay attention to every detail of my work, I really appreciate it 🙏🙏🙏
That must be close to the most beautiful bowl I’ve seen created in any video. Once again congratulations on your skill and dedication. 👍🏻
Thank you very much sir... 🙏🙏🙏
very beautiful bowl. a true artisan
Thank you 🙏
Awesome piece, thanks for sharing.. Full View always..
Thanks...🙏
really sweet design i might have to try copy this, thanks for sharing fella it turned out sweet 👍👍Ross
You're welcome and thank you too, I'm glad my video was useful and good luck, keep up the spirit.. 👍👍
Another beautiful piece of art Mayako .keep up the great work you are turning out.👌👌👌
Thank you very much 🙏🙏🙏
That is an extremely beautiful bowl the way you affixed the brown boards together is just glorious.
Thank you very much for your attention...🙏
Excellent piece I like contrasting wood
Thank you maxfli...🙏
BEAUTIFUL!! AWESOME WORK 👌
Thank you 🙏🙏
Stunning!
Thanks.. 🙏
Man, that is as good as I've seen, such a beautiful piece.
Thank you 🙏🙏
Wow what a beautiful piece.
Thank you..🙏
Amazing piece! You have an incredible talent.
Thank you very much Ray 🙏🙏
Stunningly exquisite...masterful execution...museum quality. Need I say more? BRAVO on this masterpiece!
Thank you very much for all the comments, it makes a good motivation for me to keep making better works 🙏🙏
Sungguh menajubkan. Serat kayu nya kelihatan bagus👍👍
Beautiful turning
Thank you..🙏
to make something gorgeous it doesn't have to be super complicated. here is the proof. simply masterpiece, super masterpiece, congratulations !!!
Incredible wood grain, one of your best!
Absolutely gorgeous work
This is stunning 😍!!!
Thank you 🙏🙏
Top class design and execution! Great video presentation also, thanks for sharing.
You're welcome, thank you also hopefully useful...🙏
Stunning, congratulations, stay safe
Thank you..🙏
beautiful!!
Thank you.. 🙏
Wow.
Magnificent.
Thanks lonnie...🙏
Looks gorgeous
Thank you..🙏
FANTASTIC MY FRIEND . I"VE GOT A SMALL STEE LATHE AND I"M ALSO GOING TO TRY AND TURN THAT BEAUTIFUL BOWL THANKS A MILLION FOR YOUR GREAT IDEA!!!
You're welcome my friend, I'm happy if my video is useful for others, good luck and for sure you will succeed.. 🙏
Truly excellent, and different. Many thanks. Bernard, England.
You're welcome, Thank you also for your attention...🙏
Glad I was browsing channels and found yours. good video showing good techniques and a great finished project.
Thank you for watching my video, thank you also for your attention, I hope it's useful..🙏
Appreciate. Best wishes
Thank you 🙏🙏
What can I say. Beautiful beautiful beautiful love it
Thank you very much..🙏
Very, very nice.
Thank you..🙏
Beautiful piece
Thank you..🙏
Extremely beautiful! I have seen bowls of 10 000 to 13 000 pieces with complicated patterns, but this bowl was more beautiful.
Thank you very much for your rating of my work..🙏
You have inspired me-thank you!
Do you have a pattern for this you can sell or share?
@@DougReidshopsmithdoug You mean the pattern for making a piece of wood into a ring?
@@DougReidshopsmithdoug Thank you too, I'm glad to have shared
Beautiful bowl!
Thanks,,,🙏
That is beautiful! Nice job
Thanks siding ... 🙏
Just beautiful!!
Thanks..🙏
Simply stunning from a fellow woodturner.
Thank you🙏
That is a gorgeous piece. Thoroughly enjoyed watching this turning ❣️👍✌️
Thank you so much for watching my video...🙏
@@mayukowoodturning7644
Much obliged, & just subscribed 👍
@@Henry_Little Thank you very much for the support..🙏
Spettacolare..... che legni hai usato???? Superrr
Hello Mayuko, I have only just happened upon your channel and what a boon! beautiful design and finish well done to you and thanks for sharing. The dark wood reminds of black walnut, and whatever it is it looks great. regards, Tony (UK)
Thank you very much for your attention to my work, thank you also for watching my video...🙏
Top quality work ,I love it well done!!!
Thank you..🙏
Gorgeous! You did it again! ❤️👍👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
Thank you wanda...🙏
Truly amazing !
Wow. What excellent craftsmanship! The design and finish are amazing.
Thanks judith..,🙏
Excellent travail bravo 👍👏🇨🇭👏👍
beautiful grain, beautiful finish, beautiful piece of work, I'm so glad it wasn't ruined by over-explaining. 10 out of 10.
Thank you very much 🙏
La "poesís” hecha en madera. Felicidades
Muchas gracias 🙏🙏🙏
i love your work and your videos, you are one of the guys that inspired me to create my channel!
Thank you, I'm glad my video can be useful, keep it up and keep working.. 🙏
Absolutely beautiful
Thank you..🙏
Wow! Love it, it is gorgeous. First video of yours I have seen and it is a beauty !!!
Thank you for watching my video, thank you also for your attention.. 🙏
Elegant!
Thanks..,🙏
Much more than wonderful
Thank you 🙏🙏
Amazing work, a real piece of art. Subscribed.
Thank you very much...🙏
Seus trabalhos são fantásticos.
Muito obrigado 🙏🙏🙏
I think you got a few subscribers with this one. Me included.
Proud of Indonesian 🇮🇩
Thanks giw...
Amazing what angle do cut ??
Thank you, I used 8 pieces of wood with a 45 degree angle
The average viewer looked at the end result. The woodturners looked at the table saw stop block, the angled drop away for the segments that allow quick production without kickback, the alternating flipping after each cut, the homemade two screw and bolt system for the glue drying press, the skilled use of only a rounded carbide even when roughing!, the premade flat bottom that did not rely on tooling, the odd looking skew, the use of a square block on the tail stock and the lack of sanding and the simple but elegant finish. Which likely is just a food grade oil? My only real questions are. What were the lengths of your 45 degree segments per ring? Also what was the width of your divider shims? There is so much beauty and knowledge in this video beyond what the bowl looks like. Thank you!
Thank you very much for the suggestions, criticisms and input, yes it is true I realized long before that I reversed only with carbide, but for now, that's all I can do, using a bowl gouge is not easy, I reversed in less than 1 year and still have a lot to do learning, I still have a lot to learn about turning wood, but most importantly I can produce a masterpiece and can entertain many people with my videos, 11cm long and 4cm wide per ring, with an initial diameter of 28cm
@@mayukowoodturning7644 you misunderstand. I was not criticizing. I was complimenting. Lots of men have big garages and expensive tools and they cannot create half of what you make. I was expressing admiration at your ingenuity.
@@The_Conqueeftador ooh thank you very much for your compliment, sorry I misunderstood because sometimes google translate makes me misinterpret sentences, I am happy and enjoy this work, greetings from Indonesia.. 🙏🙏
@@mayukowoodturning7644 I was asking about just the trapzoid shaped segments. They had to increase in length for each ring correct? That is why your rings get bigger and bigger. I was asking How much length did you add to the individual trapzoids per ring. Was there a formula?...Example: 1inch -> 1.5 inch-> 2 inch-> 2.5 inch, etc. etc.
@@The_Conqueeftador Yes, that's right, it will definitely make the ring bigger, the initial length of each segment is 11 cm and the final result is 9 cm, the initial width is 4 cm and the final result is 1 cm, the initial diameter is 28 cm and the end result is 26 cm.
A really beautiful piece of work, very well done. Thank you for sharing this idea, it's definitely on my to do list 👍
Thank you for your attention, hope it's useful..🙏
Nice job what kind of chuck you use?
Thank you Javier, I don't know much about the types of chucks, I found this item in the market place in my country, and I am suitable to use the chuck
@@mayukowoodturning7644 oh ok thanks
Hello Sir. Beautiful bowl. Can you please tell me more about the chisel you are using. It seems as this one of yours is much easier to use than the traditional bowl gouge.
Thank you, I always use carbide inserts, besides being easy to use, they are also easy to sharpen
Great 👍
Thanks 🙏
KEREEENNNN...
hi mayuko i want to ask how many degrees the angle of inclination for the cut is. Thank you for the knowledge. Warm greetings from Indonesia
Hello also mas jabrik, I use a 45 degree angle using 8 pieces of wood for each ring, I'm from Indonesia too, greetings to a hobbyist
@@mayukowoodturning7644 ok tank you
Hi.
Non english speaker here.
Thanks for the video !
I was wondering what kind of WAX you were using ?
Thanks a lot !
I use beeswax
@@mayukowoodturning7644 Thanks for the quick reply !
Is it just "wax made by bees" or is "Beeswax" an actual brand name?
Thanks again
@@janoaumeras8983 Try looking at the market where "beeswax" is made from beehives, why do I use beeswax because it is safe for food
@@mayukowoodturning7644 Perfect, that's what I thought!
Thanks again and great work.
Inspiring
@@janoaumeras8983 you're welcome, thank you too jano.. 🙏
Wow! What a piece. Can I ask….how much longer do you cut the individual segments as you go up? Is it a set amount or eyeballing?
It doesn't take long to cut individual segments, approximately 2 hour and the number of segments has been determined
Kayu nya bagus
🙏
What a beautiful piece of art. I stumbled on to your channel and subscribed immediately. Do you mind me asking the dimensions of this piece?
Thank you for watching my video and subscribing..🙏 , the size is 26 cm in diameter and 16 cm in height
Beautiful bowl! Made a mistake and showed it to my wife😂 What kinds of wood did you use!
what kind of error? for red wood it's rengas wood and for black wood it's rosewood
I made a mistake and showed it to my wife. Now she wants me to make her one.
Stunning! As always. Can I ask what woods you used?
Thanks..the black wood is rosewood and the red wood I don't know, I found it in a window secondhand wood shop
@@mayukowoodturning7644 The red wood grain pattern is awesome. Great find. Better execution.
@@mikecox5660 Thank you for appreciating my work...🙏
Great job you master!! Very exciting SUBSCRIBE!!!
Thank you 🙏🙏
Класс!!!
Dude, that is beautiful bowl, Bravo 👏 my friend. How about a new subscriber? You got one in me. Gonna go check out more of your work now.
Thank you very much friends for appreciating my work...🙏
Is that angle always 15%
For 8 pieces of segment using an angle of 45 degrees
Nice bowl by the way. Have you used Australian jarrah?
@@petermcilroy3224 I don't know australian jarrah, what kind of wood is it? Or maybe it's here with a different name
No it’s only in Australia it’s getting very hard to get. I’ll see if I can get some. If I get some I’ll find out how to send it
@@petermcilroy3224 Thank you very much, you are very kind, I want to know australian jarrah wood soon
Que virgueria.
What jig did you use to cut those? Do you have plans?
I made it myself with the desired angle
It's dark enough to be wenge
Stunning!!
Thanks 🙏
beautiful!
Thank you 🙏