Thanks for this bro! Love Cineprint 16 and now its time to try with 35! From Argentina! Really thanks bro! Love your word and this powergrade its a amazing
Hey Tom, great work once again 🔥 I am a proud owner of all 3 versions of your cineprints. I have just 1 feedback to share, if only 1 of your powergrade had a super clean (commercial look) right out of the box as well, along with the film looks, it'd be very helpful. As not all filmmakers are bold & brave enough to go with such rich film look. Other than that, big fan of your work 🙌
I would be very interested if there is a version of this that can be used under color management/wide gamut intermediate, since this gives me the best colors and most image latitude. Dehancer allows me to do this, so it can be done. Will be keeping an eye and see if you make this version. Cheers
This was so helpful thank you!! I'm curious how you suggest using this in the context of grading per scene, instead of per clip. I'd imagine I would want to put the power grade on a group node and dial it in to work for every shot, but there might be a couple shots where I want to make adjustments to the power grade, like the tint curves for example. just curious how you recommend going about that! Thanks man!
Thanks much Tom! This is amazing work and we should really appreciate your efforts. I have a question when it comes to using Rec709 power grades. What should the color output be if the used camera is Sony A7C and shot on sRGB?
Since your working color space is LogC3, shouldn’t the Timeline Color Space be LogC3 in the project settings? It could create problems if you’re using the HDR wheels or switching the color space/gamma of a node! 👍🏾
I wonder why the “To LogC” compound node for Sony S-log3 has the first “To Linear” CST node Input Color Space: Use timeline instead of Sony S-Gamut3.Cine? Sony cameras in S-Log3 use S-Gamut, S-Gamut3 or S-Gamut3.Cine color space.
And tbh I do not understand or see the misleading on the hole CST nodes in this power grade. But from the beginning: 1. the " to LogC CST" should convert the Sony Slog-3 footage into Arri WG 3/Arri Log C3 but convert to color space: "Use timeline" (and the timeline is Rec709 Gamma 2.4 or any else like Rec709-A or Gamma 2.2 depending on what is the setting in In Colour Management Settings) and Gamma set Arri LogC3. 2. The next CST is including into the Halation35->To Linear compound node and convert ArriWG3/Arri Log C3 into ArriWG3/Linear. And the last CST is in this compound node converts ArriWG3/Linear to ArriWG3/Arri Log C3. 3. The next CST depending on if you use CineonOut converts Use timeline/Cineon Film Log into Use timeline/Gamma 2.4 ... but the timeline now is ArriWG3/Arri Log C3 not use timieline/Cinenon Film Log.. so why you convert the incorrect Gamma and input color space? 4. The same situation in PrintOut compound node- the Rec709 Kodak 2383D65 LUT needs the Gamma set to Cineon Film Log but now the Gamma is 2.4 not Cineon.. If I missunderstanding sth please let me know 🙏
I'm really struggling with the magenta level in lips/mouths using FX6 footage across all emulations. Any ideas how to reduce magenta/tone in those areas without affecting overall skin tones (which look really great). Everything I do seems to smash the tonality of the overall image
Hey Tom, picked it up yesterday and loving it so far. Can I ask, your suggestion to have project settings with 'rec 709 gamma 2.4' as the output colour space means I'm having the dreaded gamma shift. I have avoided this in the past by using the 'rec 709-A' output colour space and gamma tag in export. Any issue with changing the output colour space in the project settings to rec709-A with regards this powergrade? Thanks
Yes, if you are on macOS, you should tag Rec709-A if you use QuickTime as your media player and need it to match I prefer grading in a dim room at the Gamma 2.4 standard of my reference monitor, then dealing with any gamma tagging and gamma shift compensation at the end before export, however if you prefer working from the start with Rec709-A that should work perfectly fine
How do I set the TIME COLOR SPACE and OUTPUT COLOR SPACE on a Mac? Because when I export, the color is less contrasted. It doesn't look like I see it in the Davinci window.
Use Rec709-A gamma tagging in the advanced export settings if you want QuickTime to use a more accurate gamma. It will still look different after uploading to web with gamma 2.2 conversion. I generally do not compensate for this but some people like to in order to prioritize darker viewing environments. In that case, you would add a CST to the timeline level before export and transform your entire project from gamma 2.4 to gamma 2.2. It will then look darker in the viewer & export, but it will match when uploaded online
just wondering if I'm doing something wrong but when I'm grading some red footage I get a decent amount of colour bending? are the colours being pushed to much ?
Alternatively, I’m not sure if this works or not because I’ve never used the OG BMPCC, but blackmagic designs their color science to be backwards compatible with their raw formats, so you may actually be able to change your footage to Gen5 color science in the raw tab. Not sure if this applies to the OG BMPCC or not
If you use gm2.4 to export the image on your mobile phone, it will be a bit grayer and inconsistent with the color of your computer. I'll just change it to 709. Is it necessary to use GM2.4?
You could do gamma compensation for the web at the project level, but you’ll also want to adjust your viewing environment to match the brighter gamma & be grading in a brighter room. The problem with doing color work in a brighter room is you begin to have issues with screen reflectivity. I recommended leaving the project at the Rec709 Gamma 2.4 standard, grading in a dim environment, and then if you want to do gamma compensation for the web, do that before export with a new CST at the timeline level. Technically speaking, the gamma shift occurs to correct for people viewing in a bright environment or against a white webpage. So if you’re adding compensation to make it look correct in your dark environment, just be aware that then your grade may look darker to people in a bright environment. You kind of just have to choose who you are grading for. Our human vision & perception of contrast changes based on our surroundings and that’s something you can’t control.
You can use the power grade in the free version of Resolve, you just need to disable the Denoise node and Grain node, as those two nodes are limited to the studio version. There are free alternatives for grain like using overlays or mattes. You can disable a node by selecting it and pressing Command + D on Mac, or Control + D on Windows.
Hey Tom! Do you think its okay to use Fujifilm Flog-2 powergrade with F-Log? I just started using F-Log 2 (newly purchased XH2s) recently but most of the footage that I currently have that I want to use for projects are F-Log. Will this greatly impact the image/results? Thank you and follower for a long time now!
I made the F-Log 2 version because it has extended dynamic range, but you can still use it on F-Log footage, you’ll just need to turn off the F-Log 2 node while leaving the CST at F-Log
Why do you prefer white balancing with the offset wheel instead of the chromatic adaptation device? I find the offset wheel much more difficult and inaccurate
You can move it at whatever hue angle you need instead of having to go back and forth between different sliders, so it's a lot more intuitive and faster, which is valuable when you're going through a lot of shots. Working early in the node tree & under the emulation, the results appear very natural. Everybody has their own grading preferences though, so I always recommend implementing what works best for your own tastes & workflow
For the digital, do you profile it with the Alexa Mini in LogC3 or using other camera? So natively the powergrade is built for LogC3? Because I usually need to do a matrix from other camera to alexa. Thanks for sharing.
Yes, the Logc3 Alexa Mini footage was the main camera that I profiled against the film, as the ALEV III sensor has been the ever popular golden standard, and everything else is matched to Alexa before feeding into the emulation. I did also shoot Alexa35 LogC4, so maybe that + color management for HDR will be my future project if I ever get around to it, but it was not my priority as those are more niche to most of the TH-cam audience, and even my own work. I'm mostly renting Alexa Mini & LF and everything is finished for SDR on the web still. But when I have shot with the Alexa35, it has been very impressive. The dynamic range in the highlights is absurd. It's a lot more like film where the general rule of thumb is "when in doubt, overexpose" because you don't have to worry about highlight clipping much at all. You just want to keep everything above the noise floor.
Got one haven’t test it yet but curious if grain and halation works for free version of DaVinci ? And also can I use this for HLG footage from my a7iii?
I love your channel and i got the Cineprint 16 V2 can't wait to use this new banger I'm asking also, could we use the new tool pour saturation on DA Vinci (solor slice) to get the subtractive sat instead of using the color boost or thebasic tool saturation ? And then, did you in the future putting this on the powergrade ? Thanks a lot !!
Yes, you can absolutely use the new tools in the Resolve 19 Beta. With something like that, I just recommend experimenting with it yourself to see where you like using it best in the node tree.
I’m working primarily in RCM (DWG/Davinci intermediate) pipeline and want to implement your power grades in my workflow. And it will be highly appreciated if you can tune your PGs for this purpose.
halo how do u expose this on slog 3? +2? or normal exposure.. i always expose my slog 3 to +2 and i found your grade to be over expose.. but i will try to expose this one to +0 ill work around this one i like the grades
By default it matches whatever you had in camera. If you wanted to add exposure compensation to adjust for overexposing in camera, you could lower the exposure at the beginning of the grade in linear space by halving the gain for every stop (0.5 gain = -1 stop, 0.25 gain = -2 stop, 0.13 gain = -3 stop etc) I often monitor with -1 stop LUTs when shooting on Arri cameras to achieve a lower noise floor. It lets you expose to the right while still monitoring a normal looking image You can make your own -1 stop LUTs for any camera by taking the normal LUT you want to use, and then prior to the LUT you change the gain in linear space to 0.5. Then export that as a new LUT
You are the goat brother. all us amateur film makers owe you so so much.
Thanks for this bro! Love Cineprint 16 and now its time to try with 35! From Argentina! Really thanks bro! Love your word and this powergrade its a amazing
Just bought it and did one sample clip in resolve studio and I’m so happy! Thanks so much for all this tedious work!
Thanks Tom, amazing work 🙏
Really beuatiful work... I wonder if it can work in DWG too...
incredible feat. props to you my guy. thanks for only charging 70 for all this work
Hey Tom, great work once again 🔥 I am a proud owner of all 3 versions of your cineprints. I have just 1 feedback to share, if only 1 of your powergrade had a super clean (commercial look) right out of the box as well, along with the film looks, it'd be very helpful. As not all filmmakers are bold & brave enough to go with such rich film look. Other than that, big fan of your work 🙌
Absolut amazing. Waiting for months and finally god damn finally
I would be very interested if there is a version of this that can be used under color management/wide gamut intermediate, since this gives me the best colors and most image latitude. Dehancer allows me to do this, so it can be done. Will be keeping an eye and see if you make this version. Cheers
I'm not a filmmaker, but I shoot a lot of video with my family on my Fuji and edit it in Davinci. I think my videos will definitely look better now!
This was so helpful thank you!! I'm curious how you suggest using this in the context of grading per scene, instead of per clip. I'd imagine I would want to put the power grade on a group node and dial it in to work for every shot, but there might be a couple shots where I want to make adjustments to the power grade, like the tint curves for example.
just curious how you recommend going about that! Thanks man!
Thanks much Tom! This is amazing work and we should really appreciate your efforts. I have a question when it comes to using Rec709 power grades. What should the color output be if the used camera is Sony A7C and shot on sRGB?
This is so inspirational, I should work on creating more content starting from now on too!❤
snagged it! so pumped to use this on our docs
Since your working color space is LogC3, shouldn’t the Timeline Color Space be LogC3 in the project settings? It could create problems if you’re using the HDR wheels or switching the color space/gamma of a node! 👍🏾
This exactly what I was thinking. All of your colour space tools would be broken or working incorrectly?
Hey Tom! Was just wondering, can the onset monitoring LUTs just be used as regular LUTs in other editors (ie Final Cut)?
I wonder why the “To LogC” compound node for Sony S-log3 has the first “To Linear” CST node Input Color Space: Use timeline instead of Sony S-Gamut3.Cine? Sony cameras in S-Log3 use S-Gamut, S-Gamut3 or S-Gamut3.Cine color space.
And tbh I do not understand or see the misleading on the hole CST nodes in this power grade. But from the beginning:
1. the " to LogC CST" should convert the Sony Slog-3 footage into Arri WG 3/Arri Log C3 but convert to color space: "Use timeline" (and the timeline is Rec709 Gamma 2.4 or any else like Rec709-A or Gamma 2.2 depending on what is the setting in In Colour Management Settings) and Gamma set Arri LogC3.
2. The next CST is including into the Halation35->To Linear compound node and convert ArriWG3/Arri Log C3 into ArriWG3/Linear. And the last CST is in this compound node converts ArriWG3/Linear to ArriWG3/Arri Log C3.
3. The next CST depending on if you use CineonOut converts Use timeline/Cineon Film Log into Use timeline/Gamma 2.4 ... but the timeline now is ArriWG3/Arri Log C3 not use timieline/Cinenon Film Log.. so why you convert the incorrect Gamma and input color space?
4. The same situation in PrintOut compound node- the Rec709 Kodak 2383D65 LUT needs the Gamma set to Cineon Film Log but now the Gamma is 2.4 not Cineon..
If I missunderstanding sth please let me know 🙏
I'm really struggling with the magenta level in lips/mouths using FX6 footage across all emulations. Any ideas how to reduce magenta/tone in those areas without affecting overall skin tones (which look really great). Everything I do seems to smash the tonality of the overall image
So excited!
YOU ARE A GENIUS
I like your tutorial on DaVinci resolve thanks for the color grading in DaVinci resolve make again more of tutorial 🎉🎉🎉🎉🎉🎉🎉🎉🎉
Hey Tom, picked it up yesterday and loving it so far. Can I ask, your suggestion to have project settings with 'rec 709 gamma 2.4' as the output colour space means I'm having the dreaded gamma shift. I have avoided this in the past by using the 'rec 709-A' output colour space and gamma tag in export. Any issue with changing the output colour space in the project settings to rec709-A with regards this powergrade? Thanks
I'd love to know this too!
Yes. It has a grey tone on the export
Is this a viable work around?
Same question here.
Yes, if you are on macOS, you should tag Rec709-A if you use QuickTime as your media player and need it to match
I prefer grading in a dim room at the Gamma 2.4 standard of my reference monitor, then dealing with any gamma tagging and gamma shift compensation at the end before export, however if you prefer working from the start with Rec709-A that should work perfectly fine
Does it also work for fuji f-log (not flog2) or rec 709 footage?
The mad man does it again
Will changing our DaVinci setting that you recommended in the intro negatively impact colour grading with cineprint 16?
No
I can use it on BMPCC4K. My powergrade does not appear when I apply it, because it will be
Absolutely killer
How do I set the TIME COLOR SPACE and OUTPUT COLOR SPACE on a Mac? Because when I export, the color is less contrasted. It doesn't look like I see it in the Davinci window.
Use Rec709-A gamma tagging in the advanced export settings if you want QuickTime to use a more accurate gamma.
It will still look different after uploading to web with gamma 2.2 conversion. I generally do not compensate for this but some people like to in order to prioritize darker viewing environments. In that case, you would add a CST to the timeline level before export and transform your entire project from gamma 2.4 to gamma 2.2. It will then look darker in the viewer & export, but it will match when uploaded online
Hi Tom! Nothing happens when I apply the grading. However, no problems with the CinePrint16 version. Do you have a solution?
could you show how the process works if using the LUTs in premiere?
Don’t recall if it was mentioned, are any of the powergrades for working in a DWG colour space?
Thanks for this! Is there any difference between gate weave for 16mm or 35mm?
just wondering if I'm doing something wrong but when I'm grading some red footage I get a decent amount of colour bending? are the colours being pushed to much ?
Can you profile some Eastman 5247 or 5248 next?
Hi Tom I just bought your Luts, I wanted to ask if I can use them even in the free version of Davinci ? or do I need to upgrade to the studio?
Hi Tom, is it possible to show us how LUTS works for FCPX and PREMIERE ?
They are not LUTs, they are Powergrades for use in Davinci Resolve only
Nice. Is there a grade in this set that works with this the OG BMPCC?
Also wondering☝️
I would recommend using the Blackmagic Gen5 powergrade, but add a node prior where you convert from the OG BMPCC space to black magic Gen5 using a CST
Alternatively, I’m not sure if this works or not because I’ve never used the OG BMPCC, but blackmagic designs their color science to be backwards compatible with their raw formats, so you may actually be able to change your footage to Gen5 color science in the raw tab. Not sure if this applies to the OG BMPCC or not
Lets go 😍
Genius
is this working on Davinci FREE version?? or only on studio?
If you use gm2.4 to export the image on your mobile phone, it will be a bit grayer and inconsistent with the color of your computer. I'll just change it to 709. Is it necessary to use GM2.4?
You could do gamma compensation for the web at the project level, but you’ll also want to adjust your viewing environment to match the brighter gamma & be grading in a brighter room. The problem with doing color work in a brighter room is you begin to have issues with screen reflectivity.
I recommended leaving the project at the Rec709 Gamma 2.4 standard, grading in a dim environment, and then if you want to do gamma compensation for the web, do that before export with a new CST at the timeline level. Technically speaking, the gamma shift occurs to correct for people viewing in a bright environment or against a white webpage. So if you’re adding compensation to make it look correct in your dark environment, just be aware that then your grade may look darker to people in a bright environment. You kind of just have to choose who you are grading for. Our human vision & perception of contrast changes based on our surroundings and that’s something you can’t control.
@@TomBolles ok thank
What if i have the bmpcc og?
Will this work with 8 bit log footage or is 8 bit rec.709 footage recommended?
Love it! May I ask what app do you use to record Apple Log with the iPhone to get best quality?
Black magic app
is this ONLY for Davinci Studio? when I apply the grade, I get a Davinci Studio overlay on my footage.
You can use the power grade in the free version of Resolve, you just need to disable the Denoise node and Grain node, as those two nodes are limited to the studio version. There are free alternatives for grain like using overlays or mattes.
You can disable a node by selecting it and pressing Command + D on Mac, or Control + D on Windows.
@@TomBolles thank you for clearing that up!
Is it compatible with slog2 and sgamut? Do you recommend modifying the sony slog3 powergrade or using the cst powergrade?
Is there a good way to use this with SLOG2?🙏 I really wanna it but i only have the regular a7iii:/
me too, using cineprint 16 with the a7iii’s 8 bit footage is difficult
@@matthewazn yes i would love to know the answer for this too!
Hey Tom! Do you think its okay to use Fujifilm Flog-2 powergrade with F-Log? I just started using F-Log 2 (newly purchased XH2s) recently but most of the footage that I currently have that I want to use for projects are F-Log. Will this greatly impact the image/results? Thank you and follower for a long time now!
I made the F-Log 2 version because it has extended dynamic range, but you can still use it on F-Log footage, you’ll just need to turn off the F-Log 2 node while leaving the CST at F-Log
@@TomBolles What you mean is to shut down the node called FLOG 2 adj which is inside To LogC?
Yes
No CST needed now? Is that because of the project setting changes that you made in the beginning?
The CST & additional color mapping is already preset for your camera within the powergrade. You just have to apply the appropriate one for your camera
hi there i just tried to import the drx files, but the entire folder is greyed out, does anyone know why or how i can fix this? thank uu
Why do you prefer white balancing with the offset wheel instead of the chromatic adaptation device? I find the offset wheel much more difficult and inaccurate
You can move it at whatever hue angle you need instead of having to go back and forth between different sliders, so it's a lot more intuitive and faster, which is valuable when you're going through a lot of shots. Working early in the node tree & under the emulation, the results appear very natural. Everybody has their own grading preferences though, so I always recommend implementing what works best for your own tastes & workflow
For the digital, do you profile it with the Alexa Mini in LogC3 or using other camera? So natively the powergrade is built for LogC3? Because I usually need to do a matrix from other camera to alexa. Thanks for sharing.
Yes, the Logc3 Alexa Mini footage was the main camera that I profiled against the film, as the ALEV III sensor has been the ever popular golden standard, and everything else is matched to Alexa before feeding into the emulation.
I did also shoot Alexa35 LogC4, so maybe that + color management for HDR will be my future project if I ever get around to it, but it was not my priority as those are more niche to most of the TH-cam audience, and even my own work. I'm mostly renting Alexa Mini & LF and everything is finished for SDR on the web still. But when I have shot with the Alexa35, it has been very impressive. The dynamic range in the highlights is absurd. It's a lot more like film where the general rule of thumb is "when in doubt, overexpose" because you don't have to worry about highlight clipping much at all. You just want to keep everything above the noise floor.
@@TomBolles Good to know, thanks for sharing. The result is very nice. Hopefully a lot of people also feel the same
buyed some minutes ago !!!
Im using D-Log from my Ronin 4D do You have a preset for D log? Thanks!
What picture profile do you use for Sony?
Upgrades baby! seems like such a more simplified less intimidating) workflow
Got one haven’t test it yet but curious if grain and halation works for free version of DaVinci ? And also can I use this for HLG footage from my a7iii?
do you already have an answer on that? i am curious too
pretty sure grain is only available for studio
my nodes are empy after import any suggestions
Same here, any suggestions guys ?
@@kopoko. I fixed mines make sure you have the most recent version of Davinci
some can help me powergrade is not working
I love your channel and i got the Cineprint 16 V2 can't wait to use this new banger
I'm asking also, could we use the new tool pour saturation on DA Vinci (solor slice) to get the subtractive sat instead of using the color boost or thebasic tool saturation ? And then, did you in the future putting this on the powergrade ?
Thanks a lot !!
Yes, you can absolutely use the new tools in the Resolve 19 Beta. With something like that, I just recommend experimenting with it yourself to see where you like using it best in the node tree.
Is cineprint35 coming to fcpx anytime soon?
You can use the LUT version in FCPX
@@TomBolles 🙏
@@TomBolles So I should purchase cineprint35 powergrade and the luts are in there?
Hello! Can you tune it to RCM? Or DWG at timeline colorspace
Level?
I’m working primarily in RCM (DWG/Davinci intermediate) pipeline and want to implement your power grades in my workflow. And it will be highly appreciated if you can tune your PGs for this purpose.
@@NKRDBLI think you may adjust the node tree by yourself adding a CST and working in DWG color space during your major adjustment.
Mac Studio specs?
has anyone tried applying these to iphone log footage?
Not compatible with C-Log 3? :-(
@@Envisual it is compatible with cclog 3, u have to use "color space transform" .
@@TomBolles You’re the best, thanks so much. Can’t wait to try it out for myself!
@@TomBolles Is this the same for F-log?
@@TomBolles Can I use the Canon OSM Luts provided while shooting on C-Log 3? Or will I need change something?
Support has now been added for C-Log3, F-Log, and DJI D-Log 👍
halo how do u expose this on slog 3? +2? or normal exposure.. i always expose my slog 3 to +2 and i found your grade to be over expose.. but i will try to expose this one to +0 ill work around this one i like the grades
By default it matches whatever you had in camera.
If you wanted to add exposure compensation to adjust for overexposing in camera, you could lower the exposure at the beginning of the grade in linear space by halving the gain for every stop (0.5 gain = -1 stop, 0.25 gain = -2 stop, 0.13 gain = -3 stop etc)
I often monitor with -1 stop LUTs when shooting on Arri cameras to achieve a lower noise floor. It lets you expose to the right while still monitoring a normal looking image
You can make your own -1 stop LUTs for any camera by taking the normal LUT you want to use, and then prior to the LUT you change the gain in linear space to 0.5. Then export that as a new LUT
@@TomBolles thank you dude! very much appreciated for the advises
amazinggg!
man film grain really doesnt hold up well on youtube