Transistor Identification and Testing made easy.
ฝัง
- เผยแพร่เมื่อ 27 ส.ค. 2014
- This Video looks at some of the more common transistors, and shows you how to test them easily with the "diode test function" of your DMM. The transistor in the intro picture isn't so common, but it was kind of photogenic.
- วิทยาศาสตร์และเทคโนโลยี
To learn more about electronics in a very different and effective way, check out my Patreon page. Click this link: www.patreon.com/MrCarlsonsLab
L
Congrats prof
How about MOSFETs? In testing/checking MOSFETs using Multimeter, when the gate is charged, why some MOSFETs (N-channel & P-channel), the drain to source let us say 0.002 or less, others, starts with 0.435 and running up as fast as a second or half a second until showing infinite? What does it mean? Does all MOSFETs behave like that?
An easy way to identify the emmiter from the collector is the emmiter always have a higher resistance then the collector because of the base emmiter junction (bias)
Finds 13003
Me: I like this. A lot.
this man is a national treasure to be protected at all costs
Good evening from Greece, I have seen a lot of videos on the internet, but yours is all the money, the best explanation I have seen, well done, you are a person who has the natural gift to convey what you know correctly.
Thanks for your kind feedback!
You should get an award for such good teaching skills. Very easy to follow. Thumbs up for sure
+Larry Lacroix
Thanks Larry!
This is so stupid because I feel stupid lol, I have been working with electronics forever (wall socket christmas light bulb kid, 33 now, but lived through charred hands) and designed circuits with bipolar transistors and so on but for some reason this is one of those goofy things I seemed to skip in my education. I am one of those guys that learned on my own and have an extensive knowledge but sometimes simple things like this remind me the holes in my education. What you have done with this youtube channel has been a huge service to people like us who delved heavily into this but never had that teacher there to really hammer the basics down. In fact some of the stuff you teach on your channel actually reminds us or teaches those who thought they knew this stuff because they simply took the rumors as gospel until you proved otherwise. You sir are a real tech, a real joy to watch, and a teacher. The best kind. Please keep up what you do. Us other folks who thought we knew our stuff are watching and going.. "whoah duh, I should have known that!" In the electronics community you are becoming a real hero and you deserve it :)
Well said Ken! Couldn't agree with you more. Yet again another great video Mr C.
If your new to electronics and wish to learn the basics this guy explains transistors in a very easy manner, his teaching method is basic , simple, and therefore puts information across in an easy to understand way.......A must watch video.
Ray H. from the U.K.
This guy has my dream job... He is awesome at what he does and explains it very well... I really miss doing electronic trouble shooting even on my own stuff. Who Knows maybe that since I am retiring I can get a shop setup and do some repair on some old radio's and TVs... If you are new to electronics you want to watch this guy.. If you an old salt like me you will want to watch too. Young or old the man makes it fun and exciting. Something that went away from me after almost 20 years when SOC (systems on a chip) technologies came out.. And pretty much made the art of repairing consumer electronics obsolete with the exception of high end audio and ham gear and others a like. I will say that his working with tubes has sparked my passion as in my education in electronics was split between both tube and solid state devices. My last few years was the death of tube taught theory at least at my particular school. I am very envious of your Tektronix equipment. When working for Western Electric back in the 80s I was assigned a 475B for my use and I absolutely loved that unit.
Great Job... Love your channel...
The extra trick to that, is identifying the collector and emitter (of an odd transistor) pins. The reading between the base and emitter is always higher than reading between base & collector.
Excellent content Mr Carlson, always enjoy it.
Cheers
Pete'.
I learned this fact of junction readings from emitter -base to base-collector being lower for silicon transistors in the early 1970's. I'm surprised he didn't mention it!
It's nice to watch a video that doesn't have "um", "ah", "so on so forth", "and stuff like that" every two seconds. You are well spoken!
Thanks Doug!
Sir. I started out in electronics watching my father work on television radios of the 20s though to the 70s. This was back when you could go down to your local 7-11 and test you horizontal vertical hold vacuum tubes and if bad there was a box just below the tube tester where you could find one and your back watching television.
The smell of solder along with the voices the would call out call signs from the ham radio. This with my dad taking the time to teach me and later pit me though a home corse from The National Radio Institute or as it was called in my day NRI. On color television repair. It was on from that day on.
I've since taking on teaching several of my son's friend's the basics that has turned into 25 a year. Kids who don't have much. I don't charge but the faces that light up when they figure it out is priceless.
Since I found you videos you have made it so much easier. Thank you sir it's a pleasure having you in my class twice a week. God bless sir.
P.S.
If you find you have equipment that has past its usefulness for you. Older oscilloscope not vintage just something you don't use are need and would like to pass it on. It would go to a good cause sir. Please don't think me less for asking because if you don't know you may pass up a blessing. Thank you for your time sir.
If you don't have the pin out data,you can determine the transistor leads to which is the EBC by taking notice of diode voltage across the junction. The Emitter - Base junction will always be slightly higher than the Base - Collector junction in bipolar transistors! This is how I determine the leads, when I need to know quickly. It works many times in circuit for a good transistor. I've used this technique for many years! I hope this helps new technicians working in electronics!
You have a really good presence as a teacher. I have ADHD and its easy to focus on you lectures even on the things i don't understand yet. You should teach, but only the ones who want to be thought like private schools and universities.
You are a legend. You don't know how stupid I feel that I'd never put 2+2 to see that N correlates to the NEGATIVE lead and P correlates to the POSITIVE lead. I've always sort of known how the N and P types work theoretically. I don't use diodes often so it's always a little fuzzy. I just look up every once in a while how to test transistors when I need it and always forget after I do it. I'm a big fan of making connections like Pnumonic devices to remember stuff. I've watched tutorials on this several times buy yours was by far the the most helpful.
Thanks for your kind feedback Jonathan!
Trying to find info on testing transistors in my vintage 1978 FM receiver, I initially thought I had a Mosfet Transistor, but later when I googled the transistor p/n (2SB595 & 2SD525) I noticed that the terminology of the three terminals on the transistors stated on the datasheet was different than that being used by Mosfet transistors. Mosfets terminals are named: gate drain and source; while Bipolar terminals are named Emitter Collector Base. The datasheet I found also identified that the B595 was a PNP (Emitter, Collector, Base) and the D525 was a NPN (Base, Collector, Emitter) transistor. After watching a ton of videos on transistors, I found your video to be the best one for my application, and that my transistors were good, your video was very helpful, and well done.
+Teagar Sky
Glad the video helped, thanks for your comment!
Nobody was really using mosfet in 78 more than likely transistor
This transistor testing is so simple, yet so obvious when you think about it. Thanks for sharing a great test technique.
I firmly believe that TH-cam has the potential to redefine the entire concept of education. It seems I have always been a hands-on learner rather than a book learner, and Mr Carlson's Lab videos not only are extremely well done and informative, but they leave me wanting to learn even more. Keep up the great work. One problem that I have not seen addressed, and that I am encountering as I try to restore a vintage transistor amp is the issue of finding the modern equivalent of the old numbering system for the semiconductors. Does anyone know of an online resource that addresses this or has Mr Carlson's Lab already done so and I missed it? Any help is greatly appreciated, Again, Keep up the great work.
Amen to that "wanting to learn even more" comment.
I third that! Paul's content is excellent and he's an excellent teacher which is a valuable asset to us. Many know _how_ but few can teach.
The top of the page at this site has a good part number look up and cross-reference; it was just shown to me and seems very helpful:
www.nteinc.com/
+Ed Vaioli: Yes sir, Ed, most definitely! I am also more of a hands-on learner. I suspect most of us are at some point. Book learning is good and important, but that's only 1/3 of the experience.
I attended a year of college. The only thing I learned in that year was that I DON'T LIKE COLLEGE! 😁 I went to trade school three times: twice for electronics (the second time was for avionics), and once for aviation. Some book learning, yes, but over 80% of the experience was hands-on learning, which I think is superior. Even a "brainiac" can't argue with those stats! I still have my FAA A&P license, although I am retired now.
To be fair, in that year of college, I did learn Fortran '77, but that was about it. And the only reason I still remember and know it was because I was able to put that Fortran '77 to use on the college's Burroughs 6800 mainframe computer (I know, I'm telling my age! 😄 ). Would you believe the college was still using a card reader? And this was in 1983!!
I could see showing Mr. Carlson Lectures in class then having a lab that executed his dialog with hands on. It would allow the lesson to sink in and stick so much better. For my tiny brain anyway. Agree 100%
@@dancage2446 updated to 2018
Sir, you just taught me a system of identifying transistors that I was completely unaware of after 35 years servicing home entertainment products! Thank you for your informative and interesting videos!
Anthony Reo Glad you are benefiting from the video's Anthony. Thanks for your comment!
I’ve watched this before but just want to say thank you for taking the time to pass on your knowledge.
You are very welcome Jerry!
Glad I caught this one, yes. Thank you Mr. Carlson. Shortly after becoming single I was able to pick up my electronics hobby. My line of work gives me access to a great deal of electronic parts. I have a hard time tossing electronics in the trash. I rob as much as I can when I have time. I started looking up parts on line so I could figure out what I have and what I need to build. I discovered TH-cam has so much to offer in electronics it's mind blowing. About a year now I have been dumping money into it, and building simple projects. The projects keep getting bigger. I built my power supply. I should have done a video, it's worth looking at features, and appearance. Really nice, better than off the shelf by far. I'm combining circuits. Learning and experimenting, I really enjoy the LED circuits. I have 3 bread boards on my desk right now, each with several LED circuits, diff leds, colors, shields, mini fiber optic bursts, I built an led vu meter which got cannibalized into a duel flasher circuit. blue green red, it works like a led chase strobe combo, and the single red at the peak hits 3 times pap,pap,pap on each run. Everything in my room that has an led indicator, everything, all leds have been changed to blue. At night my desk looks like, Well I have some ideas, and you are just the right person to help me with my questions. I have some other projects going on cabinetry. I will be seeing you at Patreon some time soon. I'm really looking forward to that.
This video bumped me up another notch. Thank you.
One of the best tutorial for anyone interested in electronics with an excellent tutor too! Precise and lucidly explained! Thank you so much!
8.24 sec of this video I learned more then weeks of classes.
Thank you very much.
You're welcome!
Just like to thank you for clarifying what has been a thorn in my side being new to the game. Especially since I've been working on a few old components that have been making go in circles for a while. You made it clear and to the point and that's one less circle I don't have to travel. Cheers!
Mr Carlson that was the best explanation l have ever seen how to test transistors pop and non .thank you very much for your excellent didactical explanation for everybody interested in transistor science. A. Ballestri Switzerland .
Once again a big thank you for the info, very helpful !
For years I've taken apart electronic devices and saved pretty much everything and now have a starting point for checking components !
Have to love the Internet and TH-cam for getting so much information out to so many people ! 👏👏
Very nicely laid out and easy to understand. When you segment and group them in that fashion, troubleshooting takes on a whole new meaning and speeds up the process; bravo once again Mr. Carlson.
+John Cunningham
Thanks John!
Nice explanation. My electronic heyday was back in the 2Nxxx days, so your explanation of the 2SA / 2SC notations was much appreciated when dealing with current circuitry. Also, don't forget about the catastrophic "collector-to-emitter" short
mate. this is awesome. instead of blasting the audience with different types of transistors, you actually showed us a system. im gonna remember most of this. :)
You’re the best, Mr. C. I hope you know how much we appreciate your work. Most generous, helpful, and fun! All the best to you, sir ✌️🎛🤙
Thanks for your kind comment, and feedback too!
Well done. Thanks. Some additional information. 1N (for dioides), 2N (for transitors) 3N (special device) are American standards. 2S is Japanese and AC is a germanium and BC (like BC 107) is a silicon European/German standards. AD (germanium) and BD (silicon) are power transitors and BU is a high power switching or high voltage (or both like BU208).
2SA (PNP) and 2SB (NPN) are germanium and 2SC silicon transitors. 2SD's are usually silicon power transitors. There is always exceptions.
Germanium transitors were used mostly for pocket radios because of lower voltage drop 0.2V vs 0.7 for silicon. However, the are obsolete now. In some designs, germanium transitors can be replaced with silicon ones. As you said, germanium transitor voltage drop can vary very much with the temperature which decreases when temperature increased.
I discovered your chanel just a few month ago and i starded to whach your videos and i have to say AWSOME I like the way you explain things. Very clear
You, unlike some other video's, explain things very well. I've been repairing certain things like guitar amps and audio stuff for years without doing actual electronic repair or, just by testing what I knew how to test and looking for burnt components or bad traces etc, bad grounds.... I needed to know how these work and your explanations are excellent. I'm 65 and my wife decided I should take a course at a local college and if I do, I hope they explain things like you do. A friend of mine just explained a couple things to me on reading resistor codes and helped me out with the multiplier part, I was like that's it? I was always terrible with math but logic is how my brain works. Once I looked at things in a different way, I have no problems learning what I could never do before. Thank you for sharing your knowledge!!! I'm certainly in on watching the rest of your video's......
You're welcome Charles! Have you checked this out? www.patreon.com/MrCarlsonsLab
College is for certification, not for learning, they have no concern for teaching, just testing on what you know.
The best and most simple explanation I have seen, thank you. Most vid's drone on for 20 min. and I still had no idea what the heck was going on. In under 10 min. I now have more knowledge than all combined, great way to teach. Thanks again for doing a great job teaching. I have noticed that your the only one I have ever seen use a curve tracer on testing components, and the visual really seems to drive the explanation home for me. It would be great if you could do a video on curve tracers, how they work, and how to use them. They seem to be a piece of test gear that has been forgotten, or not used much anymore, but seems to fascinate me because they can tell you a lot of information otherwise lost. Just a suggestion. Always love your videos, give a "up", and cant wait to see whats next.
Just found this video on Transistors, I have several model train sound boards that seem to fail for no reason, they have transistors on them and i was told that was usually the weak component. now, maybe i can detect the failed part and fix this hard to find sound boards. Thank You Meistro well done again.
This is an excellent video. Thank you VERY much!
Wow thank you this video was very helpful I've been trying to learn vintage electronics so watching this was very helpful specially for testing solid-state transistors
You're welcome!
Mr. Carlson wanted to ask you a question about a domino capacitor that is in this radio that I am trying to fix I am pretty sure they're bad it's a domino capacitor from the 60s when I go to look up the color code I'm really having a tough time figuring out what the correct value is it's either 10 picofarad or 40. It is a red diamond shape it also looks like it melted overtime but the color code is gold silver green yellow black black maybe you might be able to tell me what the value is on that I think it's a Micah. I would appreciate it like I said I'm just having a tough time trying to figure out the value and I rather ask somebody that is an expert at it. thank you Joe
Excellent presentation. Concise-to the point and clear. Thanks Asress
I went to your link, suddenly I was right inside your lab, as the home page opened across eyefinity triple screen,: boom I'm sitting right where you sit in a full size lab. It was amazing., really nice equipment. I'm in your lab looking at it actual size; virtually. I was not expecting that , I think I saw some videos from there. You have some really good offers there, very reasonable, Thanks, GTK very handy.
Thank you Mr Carlson.. you have just cleared up around 40 years of mystery surrounding transistors...lol Nothing I have ever read, followed, watched(and built from) has ever explained transistors in such a simple way. The moment you said "positive", the penny dropped on the NPN/PNP meaning.. With the numbering/clasification system, no one speaks of it, even a book I read some years ago called "transistor identification", go figure! I only remember one book by Forrest Mimms that briefly demonstrated transistor testing and identification, it wasn't 100 percent clear. It is now...
Imagine the facepalm moment I had at thinking back through the years to the age of five, when my electronics interest kicked off.. thinking of all those years of not understanding transistors and how stupid I feel today! 🤣
Glad this was of benefit Brett!
Always great explanations clear and concise. thanks for sharing Paul.
Pure concentrated knowledge!
Thanks
Excellent video. Thanks for jogging my memory!
Notwithstanding the "bipolar transistors" issue below, this is a very informative vid to start out learning about semiconductors. I find most of Carlson's lab vids very informative and helpful for the student.
Thank you for these shorter, practical videos.
Great explanation of the difference in identification of transistors. Wish I found this video earlier. So used to the jedec 1 2 3n system. Really tedious looking up components in a thick substitution book in the pre- internet days. Great vid here👍
I have to pause right here at 2:45, drop down here and thank you, You know how much time you just saved me, looking things up,? Yes I"m sure you do. Thank you very much; knowing the codes makes a huge difference. Thank you. Seriously. Oh yes, I subscribed, I have seen a few of your videos now, and I like your presentations, you make it enjoyable like it should be, clear and simple, and electronics is easily enjoyable., no end to what you can do,. Fun stuff, I'd like to see what you work on for yourself, all the cool stuff you build. I'll be here.
Thank you Mr. Carlson. I am getting a lot of knowledge from your work. I really appreciated.!
This video is a great one. I like how you explained everything about transistor naming and testing. It helped me a lot. Thank you. :)
Nice video, thanks. I've been using a diode checker (or more commonly a VOM) for preliminary transistor checking for about 50 years now. But then I grew up in the TO-5 and TO-92 era. In that case the basing was usually EBC clockwise, looking at the bottom of the can with the leads at 12, 3, and 6 o'clock positions. Early TO-92 packages also had the same pinout, before they went to putting all three leads in a plane.
Very informative as usual, thank you very much!
Thanks again. I have been taking the US Navy Electrical and Electronics Training Series (NEETS)-which is free online by the way. Module #7 covers solid state devices such as these transistors. All of the training can be downloaded as a PDF. As I get bogged down reading and studying, I go on to TH-cam and get additional help to spice it up. Your channel has really helped inspire. I now have a transistor tester and an old Navy usable oscilloscope that I picked up on e-bay on the cheap. Electronics hasn't been my background really in the past but I am really finding this stuff way cool and my focus is now locked on it. TH-cam university is much better than the college hacks who exist to siphon bank accounts. God bless!
That's great to read Larry! Glad the channel is helping you.
I comment from time to time, but always a thumbs up on every video.
Its just to let you know how we love everything you do.
Hey Thanks Simon!
We most certainly do Simon.
I know that there's been lots of vids online about transistors but this is simple and informative. thanks for sharing. I do have a request though. Over the years various transistors have been taken out of manufacture and it would make a great topic showing how to select a replacement transistor from currently manufactured stock.
2SC1969 etc is an example if I recall is no longer available very easily.
I'm sure there's many like me who once they start staring at endless data sheets the head starts to fog over and get lost in endless comparisons. Thanks again for the videos and keep them coming best regards Sean in the UK
Sean Regan Thanks for your comments and suggestions Sean!
Hi Mr. Carlson, Your scary good. So glad to be a sub. Between you, All American Five Radio, Mr. Richard McWhorter, Uncle Doug and a few others, I am really learning a lot about electronics and glad for it, Thankyou for sharing your vast knowledge of the subject and I refer you in my comments to other electrically inclined TH-camr's. Awesome channel. Take care, be good, C.
Have you seen any "TRX Bench" vids yet? Peter is another good tech.
Seth B Hi Seth, Can't say as I have. I will check him out. Thanks, Happy 4th, C.
Wow... with one diagram you have cleared up my misunderstanding of the difference between NPN and PNP ... thank you. Awesome vids.
What a great teacher you are Mr. Carlson! Thank you!
+Bernard Jones
Thanks Bernard!
Best explanation and test procedure , thank you.
Thank you for your simple and effective way of checking transistors :)
Simple and effective! Thanks Paul!
Your welcome Mauro!
How do you identify the pins if it has no label.
What a great educational video. Great information. Thank you for sharing.
VERY nice and SIMPLE explanation. You really broke it down well into layman's terms. GOOD JOB!
+mark holstrum
Thanks Mark!
Thanks for sharing your knowledge Mr. Carlson.
You're welcome David!
Terrific job. Thanks for taking your time and sharing your knowlege. Again very clear explanations.
+Douglas Tees
Glad you enjoyed Douglas!
Extreamly well done. wish you were my physics teacher about 45 years ago, oh wait we did not have to-92 back then. Great job. Thanks and keep it up.
+Sam Raja
I guess I will have to do a video on tube Identification too :^) Thanks for the kind comment Sam, glad your enjoying the video's!
Good job sir. Always refreshing seeing one of your videos.
Ver good video. Useful and easy to learn. Thanks a lot for your time I really enjoy it. Carlos
great video thats the kind of stuff that helps us beginners and troubleshooting. thanks jeff for your tip too.
Thanks you so much again mr Paul for giving us a clearly information with transistors and how to identify that thing's..
You're welcome Roy!
Very,Very good explanation of how to check the two types,made my day.Now it has been thoroughly simplified,Thank You.
You're welcome Wendy!
A very helpful video, Thank you, Mr.Paul.
You're welcome!
well done, i liked your explanations and i look more from you
Thanks. Straightforward..practical and useful.
Excellent and very clear video. Thanks. Keep up the good work
great one for transistors. makes it alot easier than depending on google all the time since i would have to swivel around and move acros the room. thanks and keep em coming.
Glad this helped Adam!
Can you believe that you can get a degree in engineering and they never teach you this ! it is the kind of things you have to look for and learn for yourself.
Thanks !
+CT1ELP Glad you enjoyed the video!
love your work, thanks for your time, cheers
I recently discovered your channel.. impressive job Mr. Carlson!
Thanks Gustavo!
I really like your way of testing.Granted its not 100% but its a great way for 99.9% or us to get to where we need to be.
I love this simple explanation.
Thanks for making since of this, as usual, Paul.
I meant SENSE, of course! LOL
Nice tutorial but a note on the 2S transistor system. You might think a transistor marked C144 is a 2SC144 but its not. It really is a DTC144 which is a silicon transistor with a built in resistor in series with the base intended for digital switching purposes. If you didn't know this then testing it as a normal transistor would make you think it was faulty.
+bob s good comment
+bob s
That's a useful device to keep in mind, thanks
True! There's a number of them. C104, C114, ect. All with varying base resistor values. I believe they come in A (PNP) values as well. I love them. They're especially nice when building transistor switching circuits in tight places. :)
Wow, synchronicity in action. Literally 5 hours ago, I was researching a component (a SOT23-6 packaged device of some sort ... ) and in so doing read a whole lot about 'digital transistors (with the resistor on the base...). You Bobs, have just filled in a tad more knowledge. Thanks for that Dude.
.
This is why I love Mr Carlson's Lab so much, the YT community here on Paul's channel really works well, a rarity on YT.
also as far as i know A124, A133, A144 and C124, C133 who are DTA and DTC where A means PNP and C means NPN and the difference is in internal resistor values
thanks for the video,
just got into Electronics, your video was very helpful! thanks again
informative approach . many thanks !
Thank You for this video. I've been needing to see this for years.
No Problem James!
This is a very great video! Thank you very much and my best compliments from Italy. Super Like.
Best video on subject hands down!
Dude that was the best explanation of a trans yet I have seen. Thanks
You're welcome Eric!
Best video on this subject I have come across!
Thanks Jerry!
Hey Mr Carlson's Lab I wish there was a better way I could express my gratitude for your concise and clear-cut explanation of this matter. It's really cleared up the confusion I came across with some of the transistors I've been testing over the past couple days. Thank you for sharing this information, and thank you for sharing it for free. Sub'd!
jl7986 Thanks for the nice comment, and sub too! Glad your enjoying the video's.
167 thumbs down ? Who the fuck would give this a thumbs down ? Clearly people that hate to learn.....Thanks Paul for all your videos. I have learned how ignorant I really am..
Great video and very well explained thank you
thank you for sharing your knowledge and wisdom.
+bustersinclair No Problem, Glad to assist!
best info if seen on this thank you its simple things that we come back to that are inportant that must be refreshed from times that are forgoten from math, egnostic over and over involvment.
Really appreciate your videos. Great work thanks
+justicelut
Thanks for the kind words!
very nice explanation and very clear! thanks bro.
You're welcome!
Seriously, why did they have to change the locations of the E-B-C? It made so much more sense for it to be in the middle. Thank you, enjoy your brilliance.
The two standards were developed simultaneously in America and Japan respectively. There wasn't any change, they just did it differently.
In my old Zenith transistor radios (> 50 yrs. old), the transistors are positioned in removable sockets. I've never had one fail, even though they were prone to failure due to "tin whiskering". I seem to recall that they were Ge devices.
Awesome simple explanation
this is beyond wonderful he did justice to it.
It is a good thing that you mention the testing characteristics for germanium vs silicon transistors. Especially as new generation germanium transistors and ICs are making a comeback in the electronics world again.
Thanks for your comment!
Awesome explanation!! You deserve more subs and views!