Thank you for this video! It as so helpful to see that you need to open up the bottom of the oven to reach the plug ins. Would love for you to do one on the broiler igniter.
Part numbers would be nice. I'm on my fourth ignitor for a kng361 in less than a year. Last Kucht tech I spoke with stated I was installing it incorrectly, even though I used this video as the guide for the installation. As noted in another comment, it has to be bent away from the direct flame. This video does not even mention that. It also ignores the fact that it failed from the factory installation within 8 weeks for, I can only assume, the same 'mis-alignment'. Great range, but poor design on this ignitor.
@@MrWharfrat05 they finally sent a part that looks just like the generic parts is used previously. I had a tech direct the install. He had me bend the igniter about 90 degrees from the burner I’ll get you the part number if I can locate it
Question for Kucht Pros : is it normal for the igniter to stay lit after the ovens gas was ignited? I have an issue on a 1 year old unit when the oven is set to heat, the burner assembly starts very slowly meaning the flame is only about 1/4 inch high if that and some of the holes flicker in and out. Meantime the igniter is ON the entire time, after maybe 8-10 minutes the full gas turns on and the flames are normal 1-2 inch but the igniter stays ON. Is this an issue with the Igniter control that it stays on, and also why would the flame be so low at the start of the ignition. Waiting 10 minutes for the full flame to kick in is not normal.
Do not buy anything from the Thor company bought a stove 4 months ago and it has not worked in too much horrible customer service do not go through what I have been through still is not fixed and they're not interested in fixing it
I have a Thor oven. Nearly identical, and this video saved Christmas dinner! Thank you!
Thank you for this video! It as so helpful to see that you need to open up the bottom of the oven to reach the plug ins. Would love for you to do one on the broiler igniter.
Could you please send a link to an igniter part compatible to this model?
Part numbers would be nice.
I'm on my fourth ignitor for a kng361 in less than a year.
Last Kucht tech I spoke with stated I was installing it incorrectly, even though I used this video as the guide for the installation. As noted in another comment, it has to be bent away from the direct flame. This video does not even mention that. It also ignores the fact that it failed from the factory installation within 8 weeks for, I can only assume, the same 'mis-alignment'. Great range, but poor design on this ignitor.
What did you end up buying to replace the igniter?
@@MrWharfrat05 they finally sent a part that looks just like the generic parts is used previously.
I had a tech direct the install.
He had me bend the igniter about 90 degrees from the burner
I’ll get you the part number if I can locate it
I was able to peel off their logo sticker and the part number they sent is AR5056 (5303935067)
Ignitor for Frigidaire
Replaces DS022, 41-205
Please show me how to replace the cooktop igniters.
Part number? The one we ordered didn't have the metal sleeve.
Question for Kucht Pros : is it normal for the igniter to stay lit after the ovens gas was ignited?
I have an issue on a 1 year old unit when the oven is set to heat, the burner assembly starts very slowly meaning the flame is only about 1/4 inch high if that and some of the holes flicker in and out. Meantime the igniter is ON the entire time, after maybe 8-10 minutes the full gas turns on and the flames are normal 1-2 inch but the igniter stays ON. Is this an issue with the Igniter control that it stays on, and also why would the flame be so low at the start of the ignition. Waiting 10 minutes for the full flame to kick in is not normal.
Hello, yes the oven igniter will be on while you have flame in the oven. The igniter being on keeps the safety valve open and the gas flow.
Would love a part number on this igniter Kutch. Can’t find anything on your website or HD where I bought it.
Found it on their website. Save the screws though.
Same part as AR5066 “Ignitor for Frigidare”.
Need a video for broiler igniter
Do not buy anything from the Thor company bought a stove 4 months ago and it has not worked in too much horrible customer service do not go through what I have been through still is not fixed and they're not interested in fixing it
Thor is a different company, is not us. But thank you for your comment. Next time buy a Kucht!
My Thor oven on the right just went out almost 5 years. Are these igniters universal
@@kucht.appliances THIS you reply to???
@@halfpint5224 they're universally junk. Poor execution on a bad design.
Why not use the same design ignitors as the burners???
Looks like Kutch does reply. How about a part number on that igniter?