Hello! thank you so much for your comment 🤗 I just updated the description box, sorry about that! The prices for the shoe racks went a little up from the time I got them, tip: look into the related items you might find a 3 tier one cheaper! I link the 2 tier one on the description box that one is $9.99 now! hope this helps, let me know if you have any other questions, and happy DIYing! 🤍
Genius. That looks really good. To try and avoid the wood splintering, cheap wood will no matter how careful you are, you can mark and drill from both sides. That does require a good accurate measure on both sides though, unless you can take it right until it's about to break through and then swap sides. You can also use a good sharp wood bit, start slow and speed up as you cut through and don't apply much pressure either as you can push through rather than cut through. These were passed down to me when I was (still am) learning and they've all helped in certain circumstances or others. Although it's been 3 years, I'm sure you've grown as a DIYer in that time.
This looks great. Nice and easy repurpose. I really like the open feel and look so you can see the wall behind rather than an entirely wooden shelf with a back. Definitely gonna give this a shot!
Terrific video! I've seen several DIY builds using the shoe racks but yours has the best mounting approach. I'm off to buy wall anchors, screws and spacers!
Thank you for this video. I was thinking of getting some displays for my die cast cars but your DIY design can hold more cars and is relatively cheaper than any displays that i saw online.
Me personally... I would have put 2 together making for a wider shelf... and it still would have worked... but cost twice as much... but would have been worth it.
I played with that idea but decided to go with the spacer idea; to make it more affordable! It is totally doable just like you said it will just cost double, if you are staining it will take a little bit longer and you will probably need longer screws. Thank you for the suggestion 😃🤍
This looks awesome! Nice work! Do you know an alternative if someone cannot drill holes into the wall? I rent an apartment and we are not allowed to drill holes in the wall but the shoe rack idea was awesome budget friendly, I was planning on using command strip hanger I just don’t know how I would be able to make it float so that it’s not flat on the wall. Hoping someone can help me with this question. Thanks!
connect the shelves too and bottom with screws. make it floor to ceiling. use bookcase on either side or something to keep upright. also can u not just fill in hole and repaint?
Command Velcro picture hangers. They work great and actually it's what hot wheels gives you when you buy hot wheel wall track sets. Very sturdy and won't damage the wall as long as you follow the directions when you remove them.
Too bad those slats couldn’t have been a little wider. But you did a good job and it looks fantastic. You’re very creative apparently. I would’ve never thought of this…lol
@@sosoreal943 if interested I'm having a hotwheels ZAMAC giveaway that costs nothing😁 & would love to have your husband enter. Thanks again Ma'am, y'all stay safe and well out there 😁
As a fellow Hot wheel enthusiast and RLC Member. You are the first lady that I've came across providing content with useful knowledge instead of a parody. Thanks for sharing.
Nice job, I love it. 🔥🔥🔥. Do you have the link to where I bought the racks?
Hello! thank you so much for your comment 🤗
I just updated the description box, sorry about that! The prices for the shoe racks went a little up from the time I got them, tip: look into the related items you might find a 3 tier one cheaper! I link the 2 tier one on the description box that one is $9.99 now! hope this helps, let me know if you have any other questions, and happy DIYing! 🤍
Thank You! Keep Videos coming
🙏✌️🙏😊
what brand was the shoe rack?
As a Hot Wheels collector myself, I love this, Wish my wife would build me something like this :-)
🤩 Thank you glad you liked it 🤍
My husband has a pretty cool wife! 💃😎🤣
well it dosent have to be made by your wife u can make it urself looks simple enough
Build it yourself
Check out our hotwheels displays!
I have been collecting Hotwheels for 6 months already, this will help to store my Hotwheels car
I am so happy you liked this idea! I love it! 🤍
Thanks for the idea! My friend absolutely LOVES hot wheels he wants a personal hot wheel track built in his house.
My wife has a rack just like that, well she did now I'm gonna take it apart, nice thank you
😂🤣😅 Happy DYing! 🤍
Being a collector, absolutely love the look of this display
🤍Thank you, Glad you liked it! 🏎🏁
@@sosoreal943 👍👍👍
Well look who I found in the comments 7 months later! Yea I thought this was an awesome idea ! Super creative !
Me sorprendió... una buena alternativa, posiblemente lo haga. Ty!
Still I'm trying to collect my first 100 hot wheels, good job keep it up.
Thank you! 🤍
I am 48 and I still love Hot Wheels !
Awesome idea and well done, thank you
Wicked display you have made!
😎 thank you!!🤍
Came for the Hot Wheels but stayed for the Accent lol great idea, I'm going to make this for my kids, tha is for the idea 🤟
Aweeee Thank you! ☺️
Thx for the idea!!! Perfecto!
Glad you like it🤍
Genius. That looks really good. To try and avoid the wood splintering, cheap wood will no matter how careful you are, you can mark and drill from both sides. That does require a good accurate measure on both sides though, unless you can take it right until it's about to break through and then swap sides. You can also use a good sharp wood bit, start slow and speed up as you cut through and don't apply much pressure either as you can push through rather than cut through. These were passed down to me when I was (still am) learning and they've all helped in certain circumstances or others. Although it's been 3 years, I'm sure you've grown as a DIYer in that time.
Your amazing!!!! That looks soooo good. Very elegant look
wowwww,,, what a great job. I have some hotwheels at home, next I will make it too !! Thanks for sharing
You are very welcome 🤗🤍
This looks great. Nice and easy repurpose. I really like the open feel and look so you can see the wall behind rather than an entirely wooden shelf with a back. Definitely gonna give this a shot!
I am so glad that you like it! 😀 Happy DYing! 🤍
Terrific video! I've seen several DIY builds using the shoe racks but yours has the best mounting approach. I'm off to buy wall anchors, screws and spacers!
Thank you so much for your comment! Happy DYI-ing! 🤍🤩
Amazing great work 👏, can you wash a over the door with metal hooks in the washing machine?
Привет крутые полки.
This is such a great idea! I'm going to have to look for those racks. Thanks for sharing!
Very creative.
Thanks for sharing.
You give me an idea to store my Hot Wheels collections. 😍
You are welcome! 🤍🤍🤍 glad you liked it!
This makes me want to play with hot wheels. It looks so awesome! Wish my boys were still little. You did an incredible job!! 🏎
Thank you 🤗🤍
wowwww niceeee jobbbb , great
🤍Thank you!!! Glad you liked it 🤍
Great job and looks great.
🤍🤍🤍Glad you liked it, thank you for watching🤍🤍🤍
Best video ever !!! Thank you so much you just save me a lot of money …..
You are welcome! 🤍
Great job. Looks awesome. Thank you for the idea. My daughter and I have thousands of hot wheels.
🤍🤍🤍Glad you liked it 😊🤍🤍🤍
Best one I have seen out there!
Thank you 😊🤍
Thank you for this video. I was thinking of getting some displays for my die cast cars but your DIY design can hold more cars and is relatively cheaper than any displays that i saw online.
Glad you liked it 🤍
Great idea! I tried gluing the 3 together so the cars have a less chance of falling
I Like you shirt logo Guns n Roses👍
😎 Thank you, got it @Target!
That looks awesome thank you for the great idea
🤍🤍🤍Glad you liked it! 😊You are so welcome!🤍🤍🤍
Yay thanks for sharing 👍👍
🤍You are welcome 🤍
Great job looks amazing 💕
🤍
Unique design. Makes the cars pop more. Going to try it.
Ok that was very cool
I can’t wait to make one myself
Brilliant idea 💯💯💯
Go for it and Happy Diy-ing! 🤍💪🏼
Right!
Love it!
I'm gonna build a huge display thus weekend.
Have fun! 🤍
Very cool 👍
Thanks 🤍
Love it 😲
Sencillamente fascinada con el vídeo. Bravo, te quedó brutal.
La pared se ve bella. Un abrazo!!
Gracias, xoxo
Good idea and by the way, your accent is just gorgeous !
Thank you 😊
Awesome idea ♥️
Glad you liked it! 🤍😊
Wow! So cool. I collect Hot wheels and this is a really awesome wall. Good job!! 👌👏👏👏
Thank you 🤍
Really good idea..
👍👍
Greeting from bali🙏✌🙏
Have a good day ✌
🤍Thank you! Glad you liked it 🤍 Happy 😃 the idea has reached international levels 🤍🤍🤍
Beautiful work
Thank you so much 🤍🤍🤍 Glad you liked it! 🤍🤍🤍
@@sosoreal943 it looks great at very low cost.
wow that looks really nice
Thank you! 🤍
Me acabo de enamorar 😍
Oh S, this is a good idea. You the boss lady.
🤍🤍🤍
Very nice 👍
😊 thank you!
nice idea , great job
🤍🤍🤍 I am so glad you that like it! 🤍🤍🤍
i am like you
collection hotweels
thank you 🤍
Loves awesome
Glad you liked it 🤍🤍🤍😊
Me personally... I would have put 2 together making for a wider shelf... and it still would have worked... but cost twice as much... but would have been worth it.
I played with that idea but decided to go with the spacer idea; to make it more affordable! It is totally doable just like you said it will just cost double, if you are staining it will take a little bit longer and you will probably need longer screws.
Thank you for the suggestion 😃🤍
Wow I am actually working on one for my background. This is awesome 👌 😀
Glad you like it! 🤍🤍🤍 Happy DYIng! 🤍🤍🤍
@@sosoreal943 Definitely and thank you 😊
This looks awesome! Nice work! Do you know an alternative if someone cannot drill holes into the wall? I rent an apartment and we are not allowed to drill holes in the wall but the shoe rack idea was awesome budget friendly, I was planning on using command strip hanger I just don’t know how I would be able to make it float so that it’s not flat on the wall. Hoping someone can help me with this question. Thanks!
Also not sure which command hanger would work best. :(
connect the shelves too and bottom with screws. make it floor to ceiling. use bookcase on either side or something to keep upright. also can u not just fill in hole and repaint?
Command Velcro picture hangers. They work great and actually it's what hot wheels gives you when you buy hot wheel wall track sets. Very sturdy and won't damage the wall as long as you follow the directions when you remove them.
This is awesome! Not only the design but the overall video. I loved it ! I might give it a try.
Thank you 😊
very very amazing nice
Great idea! Looks awesome!
🤍Thank you 🤍🙂🤍
Wow! Love it really nice! 🔥🤩✨
Thank you! 😊🤍
That was super cool
Awwweee Dimitri Glad you liked it!
Fantastic
🤍Thank you so much 🤍
Too bad those slats couldn’t have been a little wider. But you did a good job and it looks fantastic. You’re very creative apparently. I would’ve never thought of this…lol
Amazing project 🤩 where did you get hot wheels sign?🤩
w0w i dig it...r u a diecast collector?
Thanks for sharing😁
I am not but my husband is obsessed and will buy them non-stop “for our son” 💀🤣 thank you for commenting 🤍🤍🤍
@@sosoreal943 if interested I'm having a hotwheels ZAMAC giveaway that costs nothing😁
& would love to have your husband enter. Thanks again Ma'am, y'all stay safe and well out there 😁
Genius
Thank you! 🤍🤍🤍
Awesome 👌
Thank you 🤍😊
Muito bom parabéns pelo trabalho 👏
I like Gun N Roses
🤘🏼me too 🤍
That looks amazing! What shoe rack is that? Found it. Thank you!
🤍🤍🤍
Hi..awesome video 😘👍💯 ...i collect hotwheels and matchbox cars 🚗 🙃..I'm going to try to build few of these!!*** ciao!😍
Thank you 🤍
As a fellow Hot wheel enthusiast and RLC Member. You are the first lady that I've came across providing content with useful knowledge instead of a parody. Thanks for sharing.
Wow, thank you! 🥰🤍
Great job! Late reply. So how does the hotwheel cars stay on??
👍👍👍👍
Thanks dude at Walmart who told me about this!
Thank you!🤍
Very nice
🤍🤍🤍 glad you liked it! 🤍🤍🤍
So cool
Thank you!
Love it, could you do girl room one for teddy bears
I can probably figure something out! ✨💪🏼🤍
I love this idea.
New sub here.
🤍🤍🤍Thanks for subbing! so happy you like it!🤗 🤍🤍🤍
Lo maximo
Hola ere muy especial de colocar bien perfecto eres los mejores dy un 10 estrella desde galicia
Gracias 🤍🤍🤍
Awsum
Omg amazing where did u get the racks
Amazon I Have them link on the description box 🙂
this is a great idea!! do the wheels hang off?
Yes! 🙃
Nice
😊 Thank you 🤍🤍🤍
👍
🤍thanks 🤍
do.you have a link to the Amazon shoe rack information. Part # if posible. Thank you...Loved your idea..
Than you! The link is in the bio! 🤍
Yes please link where to purchase shoe racks
Hi, links are on the description box 😊🤍
Do you have a link to the spacers? Thanks so much
www.homedepot.com/p/Apollo-1-2-in-Copper-Crimp-Ring-25-Pack-APXCR1225PK/301541066
Will the cars fit without the spacers?
No. Without the spacers you will need to glue two together to get a better width for the cars.
No, you need the extra space 😉
Do the wheels hang off the side? the slats dont look that wide.
Where did you get this? The video skipped right to the part where you were holding the rack to sand
From Amazon! I linked the racks on the description box 😊
So where are the next ones going?
Can yo me one?
Im Dimitri
Great Job !
Thank you! 🤍🤍🤍
Awesome 🍀
Nice
Glad you liked it! Thank you🤍
Nice