It's nice when I can watch a video and know this person is NOT an idiot.... thank you for not wasting our time with nonsense. Just the facts. Great job. Much needed info...!!
I had a neighbor who somehow turned his stock wheels into $2000 wheels overnight. Of course on that same morning, some chap woke up with his $2000 wheels turned into wheel hubs.
One thing that wasn’t shown or mentioned is that if you use a design like the arrowhead (that has a point on one side) you can’t make all four wheels the same. Two of the wheels need to have the points go in one direction, the other two wheels in the other direction. If you don’t, then the two wheels one one side of the car will have the points pointing towards the front and the other side will have them pointing towards the rear. Notice the left side of the car wasn’t shown.
Tomaszenko, I took a look at the Audi rotors and you are correct. They are similar, and all four the same. I guess it’s just personal preference as to how one wants them to look on the car. For me, I prefer symmetry. Could be because I’m a Virgo? 🤪
That is the same problem that rims have on some cars, that they face backwards at one side, just some details that irritate me. Just check out the new electrical Audi , it strange the designers don’t think about it.
You are a champion! 😲 No need to even clean the rims (while they are removed 😑😑) And no need to change the tires either, which have been dead for 4 years ... You have redone my evening😂😭😭🤣🤣
Great content for the DIY'er who doesn't have a Grand or Two to spend on their rims. Really prefer to put the hard cash into the bits that matter most like the brakes, drivetrain, or suspension where it really matters most. Liked that you stuck to a basic design and didn't lose sight of the purpose. Thanks again. Very best wishes.
wow fantastic as i have four sets of rims that are in need of this process.... now i know how to start it :) Very clear and appropriately edited with good speed to follow steps.
You make it look so easy mate, I’ve scuffed my wheels and was going to get them refurbished. Now I’m going to try and do them myself , thanks for the videos and I’m going to learn by watching you. PS I also want to by a van and give it a go at turning it into a Camper, wish me luck everyone😊😎
Oh hell no he just made some badassszzzsss wheel's . I so got try this now that's just cool. Thanks for showing us this big fan man now . Love your youtube channel .
These look amazing my man! YES you have inspired me to go ahead and give it a go, I have a black TT with stand rims on, but I'm going to spray them like you have! they look stunning!
At first I thought what you think your doing with black, I see now that you shared this I'm now looking at my infiniti wheels perhaps about the same color with a different style. Thanks buddy for a great idea
Fishing line or dental floss will help when it comes to removing those fragile emblems on the center caps. Just floss it between the emblem and whatever it's attached to. A heat gun (blow-dryer can be used as well) will make the task even easier, as it will soften up the adhesive.
I think it looks great, and your attention to detail was spot on. Most will not buff and polish the clear coat, just one more step you took for a great result imo.
I hate youtube because it looks like this took you 10 minutes and I really want to do it now, but I know for a fact it's going to take me atleast 6 hrs the first day, and 3 hours the next day 😂 my attention to detail exceeds my patience and steadiness when it comes to painting lol
problem you have is that you are too slow, just look how fast his working. he works so fast that even camera does not always catch him, thus the jumping.
The wheels always rotate... that's the whole point of them.. If you think that you need to rotate your tyres to "even out the wear", then you should get a wheel alignment that will make your tyres wear evenly.
@@johncoops6897 An alignment doesn't change which wheels are driving the car. The driven wheels' tyres are gonna wear much much faster and therefore may need to be rotated.
Yeah, but rotating the tyres on the driven wheels won't make them last longer.... in fact, it probably makes them wear faster since the moved tyre needs to "wear in" to it's new position (eg: feathering of the leading edge on tread blocks of driven wheels). Stop and think about it - in what way could rotating of tyres possibly make them last longer? They wear as they wear! So if the driven wheel's tyres are wearing much faster, then simply replace those TWO tyres when required. The main reason that tyre manufacturers suggest rotation is because then they can sell you 4 new tyres at a time. For the consumer, it simply mean a larger upfront purchase instead of just replacing pairs of tyres as needed. Also, you waste time and money going to the tyre place for unnecessary labour costs that achieve absolutely nothing..
Very inspirational bro I have a 1997 Toyota 4Runner with the stock wheels on it going to use your method to see how it goes I want them to look nice but at the same time not too loud thank you again be blessed
Great idea, Didn't think to 2 tone wheels I'm repainting. Just search the most popular wheels for my truck. Going to mimic some expensive suckers. Go with dark grey on the natural contour of spokes, black barrels and rim. Thanks!
Just a quick tip to make this process easier ,if the tyres are good and balanced or if you have new ones fitted and balanced ,let the air out and have a tyre shop break the outside bead then get a big piece of cardboard or corflu (plastic cardboard},place a tyre of the same size as on your rims draw a circle on the cardboard from the inside of the tyre cut a slit in the cardboard so it can be slid between the tyre beads and rim as the outside beads where pushed back by the tyre shop this eliminates the need to mask the rim and allows paint to go around the edge of the rim and when they are dry you just pump up the tyre and the bead will pop back on and as the rear bead was not broken the tyre has not moved so the balance is still good and your wheels are ready to go on the car.
You did a great job on those rims, they look beautiful on the car. I need to do mine but don't know when that will be, lol. Great video and thank you for sharing.
Hey Guys! I've just done a similar video this time with a CAR! Check it Here👉 th-cam.com/video/lTgLLfl4S6w/w-d-xo.html
ST 170 💪🏻🇮🇪👍🏻☘️☘️☘️
I see, trying to highjack his video.......
Lmfao
Looks great, I'm trying to feel comfortable to tackle my own wheels.
how long does this paint normally last? is it ok for use in winter/snow?
It's nice when I can watch a video and know this person is NOT an idiot.... thank you for not wasting our time with nonsense. Just the facts. Great job. Much needed info...!!
I didn't know that McGregor was so skilled when comes to painting rusty wheels lol
You know it brother
i don't hear it
Not rusty they're aluminum. It doesn't rust
Clearly this is Colin Farrell
Alloys n rust 🤔
“Mum I want Audi Rotas”
“We have them at home son”
*audi rotas at home*
I’m not the only one that thought this 😂
I had a neighbor who somehow turned his stock wheels into $2000 wheels overnight. Of course on that same morning, some chap woke up with his $2000 wheels turned into wheel hubs.
🤣🤣🤣
What?
@@dvader3000 he’s saying that his neighbour robbed someone else’s wheels
when you finished the wheels I thought that the car would look horrible with them, but when you put them in the car it looked awesome! Great job
Until you get within 6 feet of the car that is.
Também achei isso bruno
You deserve some sort of recognition for being the FIRST out of dozens of videos I've watched on painting wheels that mentions a respirator. 👍
I didn’t like the design when you were showing the wheels off the car but once you put them on I honestly changed my mind
Same here, such a big difference when they are on the car.
I still don't like the design lol. Either way, it looks loads better than it did before. Great video! 👍
@@joaomarcelolopes6243 ŕ
Richieforthewin 1 I agree, the end result was surprisingly slick looking
Richieforthewin 1 My thought also. 👍🏼😊
One thing that wasn’t shown or mentioned is that if you use a design like the arrowhead (that has a point on one side) you can’t make all four wheels the same. Two of the wheels need to have the points go in one direction, the other two wheels in the other direction. If you don’t, then the two wheels one one side of the car will have the points pointing towards the front and the other side will have them pointing towards the rear. Notice the left side of the car wasn’t shown.
Eye off the tiger 👀
Tomaszenko,
I took a look at the Audi rotors and you are correct. They are similar, and all four the same. I guess it’s just personal preference as to how one wants them to look on the car. For me, I prefer symmetry. Could be because I’m a Virgo? 🤪
That is the same problem that rims have on some cars, that they face backwards at one side, just some details that irritate me.
Just check out the new electrical Audi , it strange the designers don’t think about it.
No shit Sherlock!
Bram
Meaning what? You thought I was stating the obvious?
Sounds like he should be doing this with a pint in his hand!
😂😂😂😂
Of coarse he does, thats the only way to do it!
Point
how do you know there is not one at arm's length? More than one, lines might get wonky.
@@patrickhayes3099 you have a really good point there!
Thanks for taking the time to make the video and share it 😊
I thought the design would be naff at first but they actually look proper smart 👍
Same as what I thought
they’re pretty much ttrs alloys
Just painted my neighbors wheels as a thank you for all the Cadillac converters iv stolen from him over the years! Thanks for the idea
There is no comparison Mate, The new ones are much nicer, what a cracken job 👍
I have done that as well on a 2020 Camry XSE. Painted them completely black and the calipers red. Upgraded the appearance 1000%
Great job there. Looks real good. Thanks for the how to. Now its time to go buy a set and try it out myself.
You are a champion! 😲
No need to even clean the rims (while they are removed 😑😑) And no need to change the tires either, which have been dead for 4 years ... You have redone my evening😂😭😭🤣🤣
Great content for the DIY'er who doesn't have a Grand or Two to spend on their rims. Really prefer to put the hard cash into the bits that matter most like the brakes, drivetrain, or suspension where it really matters most. Liked that you stuck to a basic design and didn't lose sight of the purpose. Thanks again. Very best wishes.
Great Transformation 👍
Thank you Jake 👍
I once turned a $75 set of wheels into a $42.50 set of wheels....
Note: I am a poor Craigslist negotiator.
😲😂😂😂
This shit cracked me up
🤣🤣🤣🤣🤣
🤣👀
😂😂😂😂😂😂😂
6:53 Hostess cupcakes....
Bro, those rims look wickeddddd. I honestly didn't think it would look so good. I was like woooooohhhhh
Not a fan of black rims but this matches. Looks like the tire version of the grill, black with silver. Looks real nice.
Wow absolutely beautiful I'm a painter I do guitars I'm gonna do my wheels now thanks love it
Guitar painting is incredible! I want to learn
wow fantastic as i have four sets of rims that are in need of this process.... now i know how to start it :) Very clear and appropriately edited with good speed to follow steps.
Had my doubts at first with that design, then I saw it on the car. Banging job man!
I've been watching your videos all day and they are great and give me confidence to tackle my car
You make it look so easy mate, I’ve scuffed my wheels and was going to get them refurbished. Now I’m going to try and do them myself , thanks for the videos and I’m going to learn by watching you. PS I also want to by a van and give it a go at turning it into a Camper, wish me luck everyone😊😎
good luck bro
Oh hell no he just made some badassszzzsss wheel's . I so got try this now that's just cool. Thanks for showing us this big fan man now . Love your youtube channel .
No problem 👍
Good to see you uploading again M4M! 🇮🇪
bloody awesome the design really suited the car
I love your creativity! Thank you for sharing your skills to the world sir.
Nice work, beginners can learn a lot from this video
I didn’t want to like this but I was pleasantly surprised those wheels look really good on that car. Great job
Amazing work! Spray can job I've ever seen! Better than a lot of people with professional equipment too... Lol!
Excellent design and execution. By far, the best wheel refurbish I've seen. Thanks for your content.....made me a subscriber.
That was very cool. Made the car look way better.
These look amazing my man! YES you have inspired me to go ahead and give it a go, I have a black TT with stand rims on, but I'm going to spray them like you have! they look stunning!
My 2000 TT is silver..I have to bough it out it would look so nice! And of course make it look like its attending a funeral
At first I thought what you think your doing with black, I see now that you shared this I'm now looking at my infiniti wheels perhaps about the same color with a different style. Thanks buddy for a great idea
Fishing line or dental floss will help when it comes to removing those fragile emblems on the center caps. Just floss it between the emblem and whatever it's attached to. A heat gun (blow-dryer can be used as well) will make the task even easier, as it will soften up the adhesive.
Awesome job man, really enjoyed the watch
Glad you enjoyed it!
As a 15 year old that’s learning bodywork. This was really helpful. ❗️⭕️
Turned out better than I expected. Job well done. Now I have to look closer to my wheels to see what I can do to them.
Great job as always! I wasn’t so sure about them but they really transform the car! 👍
I think it looks great, and your attention to detail was spot on. Most will not buff and polish the clear coat, just one more step you took for a great result imo.
Great wheel refurbishment, love the design too!!.
They really look way better than the boring stock alloys!!! Cool Video 🤙🇺🇸🙏
I hate youtube because it looks like this took you 10 minutes and I really want to do it now, but I know for a fact it's going to take me atleast 6 hrs the first day, and 3 hours the next day 😂 my attention to detail exceeds my patience and steadiness when it comes to painting lol
GOOD THINGS COST IN LIFE 😈
problem you have is that you are too slow, just look how fast his working. he works so fast that even camera does not always catch him, thus the jumping.
Outstanding job mate... you made it look easy!!!
Thanks 👍
The only issue is that because of the spear head design they are now directional, so you have to bear that in mind when rotating the wheels.
The wheels always rotate... that's the whole point of them.. If you think that you need to rotate your tyres to "even out the wear", then you should get a wheel alignment that will make your tyres wear evenly.
@@johncoops6897 dumbest comment award goes to this guy today
@@jonbaker3865 - I have edited the comment to make it easier to understand. The message is the same.
@@johncoops6897 An alignment doesn't change which wheels are driving the car. The driven wheels' tyres are gonna wear much much faster and therefore may need to be rotated.
Yeah, but rotating the tyres on the driven wheels won't make them last longer.... in fact, it probably makes them wear faster since the moved tyre needs to "wear in" to it's new position (eg: feathering of the leading edge on tread blocks of driven wheels).
Stop and think about it - in what way could rotating of tyres possibly make them last longer? They wear as they wear! So if the driven wheel's tyres are wearing much faster, then simply replace those TWO tyres when required.
The main reason that tyre manufacturers suggest rotation is because then they can sell you 4 new tyres at a time. For the consumer, it simply mean a larger upfront purchase instead of just replacing pairs of tyres as needed. Also, you waste time and money going to the tyre place for unnecessary labour costs that achieve absolutely nothing..
Dudeeeeee. Simple but make it look amazing. I’d say you’ve added value to it
I appreciate that!
Not crazy about the design, but still an improvement over the other wheels.
YES YES YES!!
Top Video!!!
Gonna give it a shot.
Cheers!!!
True title: Turning a $50 set of wheels into a $500 set of wheels *using 200 worth of materials*
as opposed to by magic
And it would have cost you $0.00 to not say anything ignorant, yet... here we are! It won't even take 200 to do that same job 3x.
@@NemonicsRacing One day you will be an adult and you will understand.
@@wottusay3247 maybe one day you will be smart enough to be able to do simple tasks for a reasonably price... dick
@@NemonicsRacing exactly
Nice work.... made a world of difference in the vehicle!
All the proper wheel repair guys are watching this like "nooooooooo!"
Very inspirational bro I have a 1997 Toyota 4Runner with the stock wheels on it going to use your method to see how it goes I want them to look nice but at the same time not too loud thank you again be blessed
dam that did make a big difference, i was skeptical at first lol
They look wheely good. Great job!
Thanks! 👍
Finally a good video from this channel, even tho these closely resemble stock audi rims this is still a good mod
Great job! Car looks way better!
Would have loved to see those wheels spinning on the road
Just press pause & spin your phone. Problem solved.... (I'll be right here if you need any more lifehacks.)
Bro you are literally like the Bob Ross of Auto Body. You are the Wizard.
They’re supposed to resemble the Audi TT Rs wheels.
You give a lot of inspiration to mundane people like myself to get up and do cool stuff. THANK YOU
Ah, no...they are still a set of $50 wheels.....YOU CAN'T POLISH A TURD
What do you know about turd polishing pal?
@@siopowar you watched the same video I did didn't you? Those wheels are shit, so YOU CAN'T POLISH A TURD
That's exactly what I told your mother
@@th0r34ux9 You told my mom you can't take a set of $50 TURD wheels and polish them into something better?? She already knew that
@@voodoo1449 on behalf of the entire turd polishing community, I declare you don't know what youre talking about.
WOW what a difference it made to the car 👍👍👍👍
Or just buy Audi Rotors... :D
OOOOOOOO. Damn, i thought the rims looked silly but you proved me wrong. They look awesome on the car
They still look like $50 wheels If not they look even cheaper now
Wow! It looks like a different car. Amazing job! 👍👍
Can everyone stop painting their wheels black. They're manky.
No
It has its place. Let others do it so our bronze and gold wheels look better ;)
Nice bro! Although I didn’t like the design part, you gave me an idea 💡 time to get to work 😁
Great job 👍👍
Wow! This is the most understandable Irish speech I've ever heard!! perfetto👌🏼
Looks well considering the price. Much better than the casters on before.
Nice 👌 the car looks so much better good job
Great idea, Didn't think to 2 tone wheels I'm repainting. Just search the most popular wheels for my truck. Going to mimic some expensive suckers. Go with dark grey on the natural contour of spokes, black barrels and rim. Thanks!
Looks alot better, good job they suit the car
Awsome job looks so diffrent makes the car look completely diffrent, a need to do my wheels now
Just a quick tip to make this process easier ,if the tyres are good and balanced or if you have new ones fitted and balanced ,let the air out and have a tyre shop break the outside bead then get a big piece of cardboard or corflu (plastic cardboard},place a tyre of the same size as on your rims draw a circle on the cardboard from the inside of the tyre cut a slit in the cardboard so it can be slid between the tyre beads and rim as the outside beads where pushed back by the tyre shop this eliminates the need to mask the rim and allows paint to go around the edge of the rim and when they are dry you just pump up the tyre and the bead will pop back on and as the rear bead was not broken the tyre has not moved so the balance is still good and your wheels are ready to go on the car.
Wow!! This was awesome to watch and they turned out AMAZING!! Thanks for sharing!!
Thank you! Cheers!
Looks really good man. Good job knowing how to improve something.
Wow! This is awesome! Amazing content. Thanks for sharing!
Dose eez rally fookin crisp mate. Spot on.
amazing instructional video. 👏🏿👏🏿👏🏿
What a difference, keep up the good work👍
Good job .wheels look great now 😎
Thank you ☺️
Amazing to watch 💯💯💯
Great video. Cool design and good work!
Great video and wish I had your DIY car maintenance skills 👍
Hey thank you 👍
Very nice job.
Well explained too!
Outstanding video, I really liked your presentation.. Thanks Wade Out..
I appreciate that!
You did a great job on those rims, they look beautiful on the car. I need to do mine but don't know when that will be, lol. Great video and thank you for sharing.
it does look a hundred thousand times better. I'm next. thanks for the video
Love your videos fam, you heöped me a lot with cars and other stuff, thanks🤩🤩🤩😃😃
Happy to hear that!
Well done sir!
Big improvement!
Amazing job man, hello to Brazil!!!
So mcgregor stopped fighting and starting refinishing wheels!!?? Awesome!!! Lol good work
This was a nice turnout! It really made the car look new all over again 🔥😎👍🏾