If Your Winch Stops Working! (12V 4x4 WINCH REPAIR + MAINTENANCE TIPS)

แชร์
ฝัง
  • เผยแพร่เมื่อ 16 ก.ย. 2024

ความคิดเห็น • 20

  • @lopes8566
    @lopes8566 2 ปีที่แล้ว +5

    This blokes an absolute legend. My new box had issues, he came out to my car tried everything and when it wouldn’t work he went in and grab me a new box straight away and works perfectly. 👏🏼👏🏼 Check out their new store it’s huge!

  • @mozzieridd3074
    @mozzieridd3074 3 ปีที่แล้ว +1

    That one was bloody handy. Thanks guys

    • @4wdsupacentreAu
      @4wdsupacentreAu  3 ปีที่แล้ว +1

      Glad you liked it mate, cheers for watching - Brenno

  • @4weeksleave
    @4weeksleave 3 ปีที่แล้ว +2

    Great tips there!

  • @jasonmoran8291
    @jasonmoran8291 3 ปีที่แล้ว +1

    Very helpful thank you

    • @4wdsupacentreAu
      @4wdsupacentreAu  3 ปีที่แล้ว +1

      Glad it was helpful Jas! Cheers Brenno

  • @Malc664
    @Malc664 3 ปีที่แล้ว

    What about cleaning the dyneena rope by soaking it to get sand and grit out of it? They do wear out and snap. I'd carry a spare rope when it starts looking old and frayed. Also does the dampener bag need sand or dirt in it to work incase of a line failure?

  • @Farmer2492
    @Farmer2492 ปีที่แล้ว +1

    Help my kings dominator winch just clicks when I press the controls when I put my hand on the solenoid you can feel
    It clicking any ideas what to look for

    • @michaelcarrafa8766
      @michaelcarrafa8766 5 หลายเดือนก่อน

      Did you figure this out

    • @Farmer2492
      @Farmer2492 5 หลายเดือนก่อน

      @@michaelcarrafa8766 the winch needs pulling to bits from lack of use and cleaning

    • @timmy2355
      @timmy2355 28 วันที่ผ่านมา

      I had this same issue. The red cable that went to the winch had no continuity through it but looked fine from the outside, I removed the cable and the heat shrink to find crimped lugs and the cable full of green corrosion at which point the lug fell off. The vehicle has not done any beach work

  • @benni727
    @benni727 2 หลายเดือนก่อน

    my dominator xtreme works with the controler plugged in but not with the reciver plugged in and on wireless any ideas thanks.

    • @4wdsupacentreAu
      @4wdsupacentreAu  2 หลายเดือนก่อน

      Hi there,
      Feel free to contact us on social@4wdsupacentre.com.au with a screenshot of this comment and your order number so we can look into this further for you.
      Regards, Courtney

  • @leslieliew678
    @leslieliew678 3 ปีที่แล้ว

    HI mate, this is so helpful and timely - my winch makes a click sound when i try to winch out but it is able to winch in?
    I am also unable to change my winch from the activate to disactivated, it seesm to be stuck?
    Any tips here?

    • @3br0rn
      @3br0rn 3 ปีที่แล้ว +1

      They have troubleshooting guide just for that, I had the same and it was the female pins in the solenoid weren't contacting properly, give them a clean up and test with a paperclip connecting 2 pins at a time, 2 for in and 2 for out

  • @stevekeenes4030
    @stevekeenes4030 3 ปีที่แล้ว

    Wish i saw this 3 months ago, stopped working after 18 months so i took it out and launched it !

  • @xavier8366
    @xavier8366 3 ปีที่แล้ว +1

    Buying a cheap winch is like buying a 10c condom and then leaving it in your wallet for a year and expecting it to still perform.

    • @4wdsupacentreAu
      @4wdsupacentreAu  3 ปีที่แล้ว +1

      I've been using Domin8r winches as long as we've been making 'em and swear by em mate. If you do like I showed and spool it out and in once a month it'll be a faithful workhorse for ages. Cheers Brenno

    • @lukeheych8708
      @lukeheych8708 2 ปีที่แล้ว

      Yep. Don't buy a dominator