Ur supposed to twist and remove the black round plate thing from the bulb install on the headlight ,put the rubber dust shield on and then screw in the bulbs and connect the bulb.
Komeshan Chetty I installed a set on a Honda jazz that has the same style boot you firstly remove the collar and install it into the light housing and secure it with the metal clip then install the rubber boot the Centre hole of the boot will line up with the collar just pop the rubber over the outside of the lip on the collar (same way like you would on the backside of the conventional bulb)and then finally insert the led into the hole and twist slightly to lock in place then connect plug and done .... the light housing is waterproof and the led fins are exposed to the air.....hope this helps
Robbie I love these videos where you build up the EG. I’m not even really a “car guy” but I still watch every video. I love watching people start out with a pile of junk, and through hard work and love, turn it into something they love. Keep the videos coming and you will blow up.
Chase your dream buddy!! Aint no shame in merch plugging at all!! Im still super surprised that your at 37k and not 370k. Your videos are put together amazingly and ive been doing mods to my car every time you do one to the civic! Its kept me motivated and wanting to learn more about how to work on cars and how to have fun spending little money!! Good luck getting out of your 9 to 5 brother!
Don't get on TH-cam much, but I find that when I am I have started watching you more and more. Really rare for for people to actually work on cheaper cars and do budget builds because "It just looks/is rice to build cheap cars with cheap part" glad to see someone who is grown up about it and giving us content we can actually put into our own cars instead of some car that cost 5k not running that a lot of average people don't have the money to throw into, you deserve to make it big my dude keep it real.
Bought the same lights from Amazon, the plug fitting didnt fit snug so I cut them can hardwired them in. They burn out as well, I upgraded to XKglow fan cooled LED.
Someone didn't read the instructions, the tabs on the led undo. Do you use the metal clip on the plastic rind off the new light. And then the led screws in after. It's super simple
LED headlights are cheaper than ever on Wish. I picked up some for like 15 bucks, shipping included. So far I'm a month in and they still work just fine.
Definitely dig the headlights, what lumens did you decide to get for yours? Also, If you're looking at replacing your interior lights or any exterior with LED, I recommend Diode Dynamics. Aside from the headlights, they're cheap, reliable, and ship fast. I replaced all my interior bulbs and tail lights and they can't be brighter!
I have these, they work but that's it. They have nothing when it comes to pure Philips Ultinon though. And what's going on with your reflectors? The light is scattered everywhere like lots of rays instead of a complete light mat. You might need to swap those headlight housings since that might be the reason for your poor light output.
Dude they are a 2 peice design. Twist and slide off the outer ring which fits into your headlight amd clip it into place with the little steel clips... then twist the actual bulb into the disc and plug in. I have these in my car and thats the only way they work otherwise the hight and width of the lights will be out of alignment
6 ปีที่แล้ว
Hey, I can see that those lights came with H4 connectors. It's better to change the original plastic connector to a cheramic one, because the plastic melts especially this age. I bought them from a local car parts shop for 500 forints (HUF) wich is like not 2 USD so it's fully budget thing and prevents fuse problems. PS.: Love this build ;)
Yeah, I personally include shipping in my prices when I buy something, since some buyers use shipping as a way to make the cost look lower compared to a competitor that may cost more but have cheaper shipping. I never paid 25 dollars shipping for anything. I'd wait personally and save 25 dollars. Sometimes it takes 10 days but mostly closer to 2 weeks or a month. But I mostly use AliExpress. Sometimes, things cost more Bec the seller is a scammer. So yeah, it's hard to say what's actually quality or not. It's hard to really say. Like drugs got example, buying generic isn't less safe then buying a name brand even if u pay more than double for said drug. Some things u pay more only because the company advertising cost needs to be made up, compared to a generic that doesn't advertise or a smaller company in general.
To see total price paid on wish go to order history find item and click details(not item image, that will take you to buy that product again)it should take you to the items receipt and give full paid price
Laughed so hard when you said those old lights are like candles lol I just got my led changed for my old civic and saw this video, got it from Amazon for around 40 bucks too!
i bought a set of cougars leds off amazon for 45 and they work great... i do have the right headlight housing for my car though so im not blinding ppl lol..
HOW TO LOOSEN ALLEN BOLTS: get a propane torch and heat the fastener up till its almost glowing, then take an impact driver (the kind you hit with a hammer not a gun) with an allen socket on it and use that to knock it loose then just unscrew it like any other fastener
Literally subscribed for just this Civic. Hoping it doesn't turn all rice and is a bit more like a sleeper. Anyways, love the vids, please keep this Civic goin!
Another good option is Siriusledlights.com I bought some 9006 for $40, free first class shipping, got it in like 3 or 4 days i believe Have had the same brand on a jeep for over 2 years and theyre still working
You may want to let people know that when doing the light upgrade they should have the lights adjusted so the lights don't end up going straight into the eyes of an on coming driver.
Just so you know 95% of led light, the 3 prong that you need to clip to the headlight. it can be twisted unscrew. step 1: unscrew the 3 prong until it can be pulled straight out. (there is 2 small notch that hold the 3 prong to the led light) step 2: put the 3 prong inside the headlight step 3: put the headlight clips holding the 3 prong on step4: put the headlight BOOT on the headlight step 5: put the LED light in the hole and align the led while twisting it clockwise or counterclock until it is secure like before. The way you do it can damage the headlight/led etc and if you drive eventually it will get loose if not secure properly. but once you do step 1 it should be easy to understand after that. hope this help everyone and I apologized for my grammar since it my 2nd language. =] happy modding!
I did a full LED headlight change for only $70. I did the lowbeam, highbeam, fog lights, and a little strip that the headlight has under the highbeam and lowbeam.
I got a ticket for 115 in an 80. the area I was in was a 90 and then dropped down to 80 and I didn't slow down because I'm dumb. I challenged the ticket and got it downgraded to a "failed to acknowledge road sign" or something like that. you should challenge your ticket with the prosecutor and see what they offer you.
I’m a new subscriber to your channel. Any exhaust kits or exhaust you recommend for a 95 Hatchback?😂 I want my car to be loud. This is my first car and I wanna build ittt
I live in Finland and I had nighteyes in my a4 audi, and they were perfect in finnish darkness, the law wont let us to put leds to headlights, but cops never pulled me over so I'm gonna order those to my s40 volvo before the darkest season begins
Aye bro I really fuck with you You're humble as fuck and very entertaining, thanks for the content I'm definitely gonna grab merch when I have the money, keep doing your thing brother!
@5:30 ---> The lights are different i'm assuming because you put a new light from that guy who was parting out his honda :) Im sure someone already said this but 298 comments and im lazy :p
are merch prices cad or usd? i know you’re a canadian boy like me so i wanna know what i’m paying. love the vids and super exited to see how the build goes. i think the merch is sick and i wanna show my support
Love this I’m a broke high school boy and can barley afford insurance and gas but this brightens up my day
Is that a pun?
im broke as shit with a 96 mustang
Bruh. At least you can drive. The few months before you turn 16 are the absolute worst!
Can you afford punctuation?
Zeus I’m not trying to start anything ok I like this TH-camr and don’t want to get on his bad side
Ur supposed to twist and remove the black round plate thing from the bulb install on the headlight ,put the rubber dust shield on and then screw in the bulbs and connect the bulb.
^ This!
Exactly. 👍🏻 I keep seeing so many people struggling to install these.....just twist off the adapter plate on the led bulb and install that first
Well I am new but yeah. There is a screw you have to take off the black housing to get the boot on. Then screw it back in.
@@Poolio32 so is there no way to install these led's and still use the protective boot rubber?
Komeshan Chetty I installed a set on a Honda jazz that has the same style boot you firstly remove the collar and install it into the light housing and secure it with the metal clip then install the rubber boot the Centre hole of the boot will line up with the collar just pop the rubber over the outside of the lip on the collar (same way like you would on the backside of the conventional bulb)and then finally insert the led into the hole and twist slightly to lock in place then connect plug and done .... the light housing is waterproof and the led fins are exposed to the air.....hope this helps
Nice selection on the bulbs. Been wondering about those myself so I'll be watching to see how they last. Keep it up. Loving the build.
Robbie I love these videos where you build up the EG. I’m not even really a “car guy” but I still watch every video. I love watching people start out with a pile of junk, and through hard work and love, turn it into something they love. Keep the videos coming and you will blow up.
5:50, "Excitingly Large"....
😂idk why I said that
this is what my ex didn’t say when i took off my pants
You're like a non-douchebag TJ Hunt, with more relatable content. Plus I like Molson so Canada is cool .Love the channel. Subbed.
ahaha thanks man! molsons my beer buddy!
Got Auxbeams in my van. A little bit cheaper, but they have been working well since March. I absolutely love them.
That round disk around the LED light comes off, to make installation easier better fitment for the rubber dust shield
Chase your dream buddy!! Aint no shame in merch plugging at all!! Im still super surprised that your at 37k and not 370k.
Your videos are put together amazingly and ive been doing mods to my car every time you do one to the civic! Its kept me motivated and wanting to learn more about how to work on cars and how to have fun spending little money!!
Good luck getting out of your 9 to 5 brother!
Don't get on TH-cam much, but I find that when I am I have started watching you more and more. Really rare for for people to actually work on cheaper cars and do budget builds because "It just looks/is rice to build cheap cars with cheap part" glad to see someone who is grown up about it and giving us content we can actually put into our own cars instead of some car that cost 5k not running that a lot of average people don't have the money to throw into, you deserve to make it big my dude keep it real.
these comments always get me dude... thank you so much! Love the support!
Bought the same lights from Amazon, the plug fitting didnt fit snug so I cut them can hardwired them in.
They burn out as well, I upgraded to XKglow fan cooled LED.
Someone didn't read the instructions, the tabs on the led undo. Do you use the metal clip on the plastic rind off the new light. And then the led screws in after. It's super simple
I love all the effort you put in these videos for us
❤️
Yo love the videos about the budget build!! I think you should do a projector retrofit for your headlights!
i have a pa system as well, i had it in the engine bay but i mounted it to the inside of the frint bumper, much better
You have to put the led chips facing up and down in order not to blind people... if u put them right and left you'll blind everyone 😉
Bratsoni fuck it
LOL chill
Pielemans you’re a fucking moron.
Pielemans lmfao
Pielemans Woah there bud take a chill pill honestly
And for the led base you can take the adapter looking piece out then put the led in after
LED headlights are cheaper than ever on Wish. I picked up some for like 15 bucks, shipping included. So far I'm a month in and they still work just fine.
When you go to tint your windows think about getting perforated vinyl for the rear windows. Just a thought
Great video.
What are the chances you'd pickup a cheap motorcycle and do a second series of cheap upgrades for that?
Try the tyre analyser, it might be tricky to install but it should be an interesting feature
Definitely dig the headlights, what lumens did you decide to get for yours? Also, If you're looking at replacing your interior lights or any exterior with LED, I recommend Diode Dynamics. Aside from the headlights, they're cheap, reliable, and ship fast. I replaced all my interior bulbs and tail lights and they can't be brighter!
I have these, they work but that's it. They have nothing when it comes to pure Philips Ultinon though. And what's going on with your reflectors? The light is scattered everywhere like lots of rays instead of a complete light mat. You might need to swap those headlight housings since that might be the reason for your poor light output.
I been using my Nighteye H4 bulbs for 3 years now and still working Nice 😁
Dude they are a 2 peice design. Twist and slide off the outer ring which fits into your headlight amd clip it into place with the little steel clips... then twist the actual bulb into the disc and plug in. I have these in my car and thats the only way they work otherwise the hight and width of the lights will be out of alignment
Hey,
I can see that those lights came with H4 connectors. It's better to change the original plastic connector to a cheramic one, because the plastic melts especially this age. I bought them from a local car parts shop for 500 forints (HUF) wich is like not 2 USD so it's fully budget thing and prevents fuse problems.
PS.:
Love this build ;)
I know in Ontario it is actually not aloud to go from an 80kmh to a 50kmh. I’m not sure about BC but it could be the same.
Amazon has some led headlights for a good price and if you have prime then fee 2 day shipping
Yeah, I personally include shipping in my prices when I buy something, since some buyers use shipping as a way to make the cost look lower compared to a competitor that may cost more but have cheaper shipping. I never paid 25 dollars shipping for anything. I'd wait personally and save 25 dollars. Sometimes it takes 10 days but mostly closer to 2 weeks or a month. But I mostly use AliExpress. Sometimes, things cost more Bec the seller is a scammer. So yeah, it's hard to say what's actually quality or not. It's hard to really say. Like drugs got example, buying generic isn't less safe then buying a name brand even if u pay more than double for said drug. Some things u pay more only because the company advertising cost needs to be made up, compared to a generic that doesn't advertise or a smaller company in general.
the excitingly large led things are called heat syncs and they are there to cool the led. (jsyk)
To see total price paid on wish go to order history find item and click details(not item image, that will take you to buy that product again)it should take you to the items receipt and give full paid price
Could you link the part in the description please?
I will start to, my bad!
Robbie Ferreira thanks
what was the brand of the lights? and, did they held up?
Did these last very long? Or did they get replaced with the new headlights?
Keep up the good work, you're channel is amazing, and for sure you will get a huge sub raise soon!
Every time these videos show up on my feed it reminds me of the “clean eg hatch” videos
Laughed so hard when you said those old lights are like candles lol
I just got my led changed for my old civic and saw this video, got it from Amazon for around 40 bucks too!
i bought a set of cougars leds off amazon for 45 and they work great... i do have the right headlight housing for my car though so im not blinding ppl lol..
They definitely look good. Blindly good.
HOW TO LOOSEN ALLEN BOLTS: get a propane torch and heat the fastener up till its almost glowing, then take an impact driver (the kind you hit with a hammer not a gun) with an allen socket on it and use that to knock it loose then just unscrew it like any other fastener
Literally subscribed for just this Civic. Hoping it doesn't turn all rice and is a bit more like a sleeper. Anyways, love the vids, please keep this Civic goin!
I've literally watched all of your videos in one day
Another good option is Siriusledlights.com
I bought some 9006 for $40, free first class shipping, got it in like 3 or 4 days i believe
Have had the same brand on a jeep for over 2 years and theyre still working
I ordered the same lights. Got them in 3 days and they are dope.
I actually missed the wheels but when you mentioned I had to go back 😂
ahaha shouldn't have said anything!
You may want to let people know that when doing the light upgrade they should have the lights adjusted so the lights don't end up going straight into the eyes of an on coming driver.
How did you find your mods on wish I'm having trouble actually locating parts for my car
I got my 8k leds for my 01 xterra and they are great best $22 USD wish purchase ever only issue is people brighting you when your low beams are on
had for a year now and still like new
do you have any laws in your area about putting hid and LEDs in non-projector housings? because that's illegal where I am
Just so you know 95% of led light, the 3 prong that you need to clip to the headlight. it can be twisted unscrew.
step 1: unscrew the 3 prong until it can be pulled straight out. (there is 2 small notch that hold the 3 prong to the led light)
step 2: put the 3 prong inside the headlight
step 3: put the headlight clips holding the 3 prong on
step4: put the headlight BOOT on the headlight
step 5: put the LED light in the hole and align the led while twisting it clockwise or counterclock until it is secure like before.
The way you do it can damage the headlight/led etc and if you drive eventually it will get loose if not secure properly. but once you do step 1 it should be easy to understand after that. hope this help everyone and I apologized for my grammar since it my 2nd language. =] happy modding!
I did a full LED headlight change for only $70. I did the lowbeam, highbeam, fog lights, and a little strip that the headlight has under the highbeam and lowbeam.
Will there be any performance mods??
You bet!
I got a ticket for 115 in an 80. the area I was in was a 90 and then dropped down to 80 and I didn't slow down because I'm dumb. I challenged the ticket and got it downgraded to a "failed to acknowledge road sign" or something like that. you should challenge your ticket with the prosecutor and see what they offer you.
CarLords lol got a 100 in 50 ha. I got all the tickets thrown out
ye ye ye always fight tickets
haha i had the same problem with halogens once. and the previous owner installed 24v bulbs.
i got a parking ticket from impark, cause i parked in reserved parking at university which is some bs cause the sign is blocked by huge pipes :(
If you go for a new exhaust look up yonoka their around 250 shipped and they sound great and don't look like a massive fart can
41 is a lot, i got two pairs of leds for my DC2 and H22 and paid only like 36 from ebay 😅
I think I might need to get some led's in my car now!
What did you type to find those I couldn't find em
Wow those LED bulbs are cool😍
Damn right about the light bulbs!
Love this channel ,love your civic
Greetings from the land of down under Oz
Ive been using nighteyes in my car for the past year, i have the 10000 lumens in both the high and low beams
I love this build to much
You should try Joom they are cheaper than Wish and don’t charge shipping and the items are same as wish
What kind of tools do you use?
How many lumens where the lights
I’m a new subscriber to your channel. Any exhaust kits or exhaust you recommend for a 95 Hatchback?😂 I want my car to be loud. This is my first car and I wanna build ittt
I live in Finland and I had nighteyes in my a4 audi, and they were perfect in finnish darkness, the law wont let us to put leds to headlights, but cops never pulled me over so I'm gonna order those to my s40 volvo before the darkest season begins
Hell yeah bro keeping it 💯 that's what we want and need have a good one bro thanks for your time
Can’t wait to see what this car becomes
Like first, then watch
너도 먼저
You can cut those boots to fit pretty well
Added a like and subbed for your honesty keep up the great work
❤️
I'm about to buy some of them for my truck those are sweet
way brighter but maybe aimed a bit high, as long as your not blindin other drivers out there i dig the lights
I have those same fender flares on my car!
I am glad that I subcribed
eh2 come with vtec e and with the rpm cluster
Finally
Been waiting forever!!!
Get JDM Black housing glass headlight with amber side markers
I have a 2003 Honda Civic EX that I am going to start a build on after BMT. The headlights are the same way, absolutely useless.
If your light goes oat?
Bro lights looks good. But you should have email showing the price from wish
yess what i been waiting for
i have a steering wheel replica MOMO on wish from a German shipper. It cost me 20€ ( approx 30$ i guess? ) and i love it.
mines on the way 😏 nardi rep tho not momo
Keep up the good work my dude🙏🏼🙌🏼
Aye bro I really fuck with you
You're humble as fuck and very entertaining, thanks for the content I'm definitely gonna grab merch when I have the money, keep doing your thing brother!
U need coolent in your Reservoir looks a little low
Just subscribed this content is so entertaining
@5:30 ---> The lights are different i'm assuming because you put a new light from that guy who was parting out his honda :) Im sure someone already said this but 298 comments and im lazy :p
Damn dude your hands got filthy from just changing the first bulb haha. I may just subscribe to you!
are merch prices cad or usd? i know you’re a canadian boy like me so i wanna know what i’m paying. love the vids and super exited to see how the build goes. i think the merch is sick and i wanna show my support
It says CAD next to all the prices he shows. Right now the exchange rate is easy with 1 Cad= .75USD so these lights are about 30 USD
Are you going to paint the car yourself or are you going to take it to a shop?
it looks like your headlight is broken both with the led and halogen :/ in the dark
Get led turn lights and rear lights now lol ,full send
I have the same . used on 2 cars going 2 years strong.
hoping for the same!
The same exact ones on amazon for 20 bucks+free 2 day shipping
Smh Vancouver police 💁