Thanks. I have a similar turntable, a slightly newer model with about the same motor. I like the idea of flipping the motor upside down. Very helpful video!
Nice job Trevor, you're becoming a turntable expert one table at a time. I'm a bit leery of the cheap swaps as I've found the fibers of their loose packing are often left behind, especially important in a bearing well such as that. I'm now using cosmetic swabs which have a tighter packing and are less prone to traces left behind.
Thks for another vid Trev. Yep, Dirty ( or even faulty) speed trimmers common on these aged tables, also on a lot of technics boards. I replace them with Bournes if they fit.
I wonder if when adjusting Torque Difference (@36:32) using the Math function on the scope would have been a way to resolve the difference/similarity of the two signals?
Those SWABS are priceless. LOL Elephant Q-TIPS Capacitors on these units need replacing to get them spinning and locked from my experience. The controls and switches and VRs always need clean. I do it as routine as they all have the same symtoms and usually avoid interacting with the motor, other than clean and lube and then back together asap to reduce an accidetal FUBAR, {dropping, scratching, or doing something silly - done that before) . The unit has heavy chassis, very decent platter and a fairly beefy motor. This style is a huge improvement over the AC sync tables lacking pitch control or speed sensors a la PL-12D or any of the like.
Hi , iam a subscriber of your channel, nice video. I have a AP - 307 . In this video why pins 12 & 13 shorted while adjusting vr4 to zero. In the manual its mentioned 80+/- 10 mv for Ap - 307 . How much voltage need ? Is it 80 mv?
I have the same turntable it wont play any sound from the speakers. The amp phono inputs is ok cause I have checked them using another turntable. I do not want to open it so my question is : Does the sound from the AP206 stylus passes through an internal preamp before going to the amp phono input?
Just imagine if an LP120 owner had gotten his hands on this baby. He probably wouldn't have noticed anything was wrong. But jokes aside, nice fix and video. Thanks. Ps. Grado is one of those classics you can't go wrong with.
Γειά σας . Έχω στην κατοχή μου το συγκεκριμένο και δεν κρατάει σταθερά τίς στροφές. Τού έχουμε αλλάξει όλους τους πυκνωτές και τά τρίμερ αλλά δεν γίνεται τίποτα τί πιστεύεται ότι μπορεί νά φταίει τό έχω 45χρονια σάς ευχαριστώ πολύ
Hello Trevor i have a request for you i watch all your episodes with my family can you do one episode about cleaning utensils , names and where to buy them , thank you in advance and best regards from Winnipeg
What a terribly misguided thing to do. If you had any idea of what this channel is about and what Trevor does, through his videos, for his community of followers you wouldn't even have given this a thought. SMH
Thanks. I have a similar turntable, a slightly newer model with about the same motor. I like the idea of flipping the motor upside down. Very helpful video!
Thank you sir. I just saved an Akai AP-206 from the dump today, and need to clean it up.
Nice job Trevor, you're becoming a turntable expert one table at a time. I'm a bit leery of the cheap swaps as I've found the fibers of their loose packing are often left behind, especially important in a bearing well such as that. I'm now using cosmetic swabs which have a tighter packing and are less prone to traces left behind.
Thks for another vid Trev. Yep, Dirty ( or even faulty) speed trimmers common on these aged tables, also on a lot of technics boards. I replace them with Bournes if they fit.
I wonder if when adjusting Torque Difference (@36:32) using the Math function on the scope would have been a way to resolve the difference/similarity of the two signals?
Those SWABS are priceless. LOL Elephant Q-TIPS
Capacitors on these units need replacing to get them spinning and locked from my experience. The controls and switches and VRs always need clean. I do it as routine as they all have the same symtoms and usually avoid interacting with the motor, other than clean and lube and then back together asap to reduce an accidetal FUBAR, {dropping, scratching, or doing something silly - done that before) . The unit has heavy chassis, very decent platter and a fairly beefy motor. This style is a huge improvement over the AC sync tables lacking pitch control or speed sensors a la PL-12D or any of the like.
Well done and thanks for the video Trevor, nice turntable. I assume that wasn't a sintered spindle bearing?
Hi , iam a subscriber of your channel, nice video. I have a AP - 307 . In this video why pins 12 & 13 shorted while adjusting vr4 to zero. In the manual its mentioned 80+/- 10 mv for Ap - 307 . How much voltage need ? Is it 80 mv?
I have the same turntable it wont play any sound from the speakers. The amp phono inputs is ok cause I have checked them using another turntable. I do not want to open it so my question is : Does the sound from the AP206 stylus passes through an internal preamp before going to the amp phono input?
Great job, thank you!
Just imagine if an LP120 owner had gotten his hands on this baby. He probably wouldn't have noticed anything was wrong. But jokes aside, nice fix and video. Thanks.
Ps. Grado is one of those classics you can't go wrong with.
I would SO rather have an analog scope for the servo adjustments!
Hi, I need sensor Hall or board for this turntable, somebody know where find it?
What the problem if all is not spinning at all
Odd that you didn't show the turntable running and the Quartz lock on steady🤔🤨
This turntable isn't quartz locked, it has a servo that's adjustable
Γειά σας . Έχω στην κατοχή μου το συγκεκριμένο και δεν κρατάει σταθερά τίς στροφές. Τού έχουμε αλλάξει όλους τους πυκνωτές και τά τρίμερ αλλά δεν γίνεται τίποτα τί πιστεύεται ότι μπορεί νά φταίει τό έχω 45χρονια σάς ευχαριστώ πολύ
Hello Trevor i have a request for you i watch all your episodes with my family can you do one episode about cleaning utensils , names and where to buy them , thank you in advance and best regards from Winnipeg
Thanks for the suggestion. What in particular would you like to see?
@@TrevorsBench I think a short video of all the chemicals you use and where you can buy them , thank you Greg.
nice work ..
I found this video looking for humble AP-D2 manual - is it possible to register at vinylengine these days ?
REPORTED FOR PLAYING COPYRIGHTED MUSIC
why are you such a loser? you should get a life!
SNITCHES GET STICHES
Your mummy will be proud of her daughter!
Not wanting to be a killjoy but there's no need to report me. TH-cam scans every video I upload for copyright.
So sorry for being a fun sucker
What a terribly misguided thing to do. If you had any idea of what this channel is about and what Trevor does, through his videos, for his community of followers you wouldn't even have given this a thought. SMH