Since I get a lot of questions about it: The clamps I used are called eccentric clamps. I bought mine over here but they can be bought elsewhere as well: bit.ly/2m9abzk (not sponsored)
Excellent idea and video! Definitely will help me with my build. One safety tip - *always* clamp metal when drilling, even if it is soft aluminum. If the drill bit catches it becomes a knuckle buster.
This is genius. As someone who has no real skill or experience or power tools, I wish you'd build and market these, they'd definitely fill a void in the market. If they were reasonably priced I'd probably buy two.
A suggestion to remove more wobble from the long stretch would be to put a set of ceiling rails like the ones you already have between them and make them travel on them. Then mount the camera arm on that rail. You don't have to "re-mount" the camera from side to side, just slide it to the new position readjust the arm (which can be shorter now) and your good to go. You could even support the longer rails along the middle of the track at the outside to prevent sag, by attaching to the ceiling at strategic points with single rail I-beam type connections.
Hey Charles, Thanks for the extensive comment! I first looked at making a xy gantry system in my shop similar to a large shop crane or a 3d printer has. But the cost of material would be pretty high. That's why I went for this option. You are right though and It would make for a nice system
The Practical Engineer Emiel, as I can see the movement comes mostly from sliding/rotating discs. So I am making the spacer (white turned part in your video) a little bit thinner, and replacing one of the bracket bolts with the eccentric clamp. So after the arm is slid and rotated to the desired position the discs assembly can be tightened. By the way, your design just looks simple and easy. Actually, it is pretty knowledge-intensive with lots of interesting ideas.
I have made it finally. My shop is pretty small too, just a little bigger than yours. So my rails are 8 ft long, and I had to add the third rail mounting block in the middle. The eccentric clamp that tightens the disks works great. The only movement left is from the rails flexibility, but it is of low frequency and easy to stop. Thank you again for the idea Emiel!
Thanks! Yeah, the clamps make the difference here :) They are these ones: uk.misumi-ec.com/vona2/detail/221005521569/?KWSearch=eccentric%20lever&searchFlow=results2products
This is one of the best camera rigs I have come across online. I like the simple yet strong construction. I am a new subscriber from your shop tour video but am enjoying your channel a lot! You're going to sky-rocket on TH-cam! Great ideas!
Hi ! Thank you very much for this great tutorial. Superb look and super efficient arms. I saw a lot of models on TH-cam and I conclude that your model is the best that I have seen (according to my criteria). Well done and all good to you Alain from Switzerland
Thank you SO much for this video, you just taught me that I need to get a 3D printed Tripod Head base! I've been looking for other solutions for way too long!
I like you design. I've made a couple of rigs similar to this but they have alway been a little wobbly when fully extended. How stable is your design when at full reach?
@@Thepracticalengineer thank you for the advise. Since we have this pandemic and we have no face to face classes to our students, I temporarily made my room a small DIY shop for my projects. I made some table and hand free alcohol dispenser out of scrap woods and aluminum.
Super job mate. It's going to make filming so mush easier. I suspect you're going to get a lot of use out of it. I've never regretted making a roof mounted arm like this for my 8x6 workshop
Wonderful solution! Yes, tripods can be problematic. This should give you some nice top-down camera views also. Looking forward to seeing this used in your next videos.
thanks dude, this is super interesting. i'm trying to build myself a quality articulating task lamp and this should work nicely. everything sold these days is total garbage, the arms can barely hold up the light socket they're mounted to, so i guess i have to build my own.
Nice work! I love how you maximize such a small workspace. A thought on the joints - there are mechanisms that release tension when you press them, rather than the flip handles you've got, that would allow you to grab the joint, squeeze, and reposition. If you were to accidentally let go of the arm, the joint would lock and not drop your rig. Unfortunately Google is failing me right now or I'd supply a link.
Cool. I can see how this could be modified for extra spot lighting too. (Hey, Sorry to be spamming your channel this weekend. I've just found your channel and really excited by the cool projects like this one. )
Hey, New subscriber here! Just wanted to say congrats on this project - it's simple yet powerful. I too suffer from the "small workshop" problem, so I'll definitely make something similar! Keep up the good work!
Hello I'm surprised you did not put any compensation spring or gas spring. There is no risk when you unscrew a screw that the camera can drop in a pinch? Always captivating and original ideas, keep it up! cordially
Are the files or specifications for the 3D printed parts available anywhere? I love the design but don't know what I could substitute for those elements.
What a great idea mate, as I was watching this video I thought of how I could use something like this in my shed. Great job mate keep up the good work!!
¡ Te felicito por tu trabajo, exelente video, la exelencia tota hace rato vi otro videom parecido pero en madera de un señor, pensè que era lo mejor, pero me rè equivoquè, este video es lo mejor de lo mejor, sos un grande!
Looks like a great little project to try. One thing I noticed that wasnt related to your project directly that you may not be aware of. You should be very careful using the same grinders for aluminium and steel products as any build up on the wheels of aluminium can accidently cause a thermite reaction in the presence of iron and heat from the wheel friction. (Think welding railway tracks welding process) The result can be explosive and quite dangerous so make sure that you replace the wheels or discs after use or alternatively use dedicated discs for each metal to avoid accidents. Just a cautionary thought not a criticism. A friend had this happen years ago and was injured , thus the cautionary word.
Since I get a lot of questions about it: The clamps I used are called eccentric clamps. I bought mine over here but they can be bought elsewhere as well: bit.ly/2m9abzk (not sponsored)
The Practical Engineer it would have been awesome to pile it long ways of the entire room so you could slide it the full room
Where do you buy the camera adaptor
Nice one! I just came to the comments to see if anyone else asked lol
could you make me one and if so what would it cost me this is what i need and the dont sell them nowhere but i need it for a microphone
Congratulations on your successful rig. Glad to see you didn't compromise on rigidity or length. Thanks.
Thanks! I'd actually like to make the top a bit more sturdy but there is only a small space where I can drill in the roof
Have you thought about adding another clamp to your slider to clamp to the slider to the ceiling rail?
Excellent idea and video! Definitely will help me with my build.
One safety tip - *always* clamp metal when drilling, even if it is soft aluminum. If the drill bit catches it becomes a knuckle buster.
The hero we all need but don`t deserve.
I've had a similar project on my list for a while. Seeing this has just pushed it up the list a fair bit.
Mission accomplished!
Your small work space gives me hope!!!!!!!!
Everything is possible if you are creative enough to find a way ;)
You made it look very easy I dare not think what something like that would cost to buy pre-built
This is genius. As someone who has no real skill or experience or power tools, I wish you'd build and market these, they'd definitely fill a void in the market. If they were reasonably priced I'd probably buy two.
They are kind of specific for every use.. That makes it hard to make and sell them I guess
As someone who also has a small shop, this is SUCH an awesome idea! I definitely need to figure something like this out too!
Yeah, you should. It turned out very helpful when using it last weekend
A suggestion to remove more wobble from the long stretch would be to put a set of ceiling rails like the ones you already have between them and make them travel on them. Then mount the camera arm on that rail. You don't have to "re-mount" the camera from side to side, just slide it to the new position readjust the arm (which can be shorter now) and your good to go. You could even support the longer rails along the middle of the track at the outside to prevent sag, by attaching to the ceiling at strategic points with single rail I-beam type connections.
Hey Charles, Thanks for the extensive comment! I first looked at making a xy gantry system in my shop similar to a large shop crane or a 3d printer has. But the cost of material would be pretty high. That's why I went for this option. You are right though and It would make for a nice system
Wow. the result is pretty good.
I am astonished by how well you have organized your small space. And good projects. Best regards from Florence, Italy
Thanks Roby! That's nice to hear! I try to keep it as organised and tidy as possible to be able to work efficient
Great 👍👍👍 I will definitely copy that ❤
That's something I need to make some day. Good Job Emiel
Great idea. I love this , super handy- and the Wooden version Stephen’s 8x6 workshop has is a thing of beauty. Nice job 🤩🌲🦊🌲
Thanks! I was to scared to make it out of wood. Aluminium feels like it doesn't break as soon. I've actually watched Stephens video twice for ideas.
That looks awesome! I'll be making one for my self! Thanks!
Awesome! Show me when it's done!
Thank you Emiel. This is the best design and implementation I could find for a few hours of searching. Gone to make it.
Thats cool to hear! You might want to make the mount to the ceiling a bit more rigid than mine has. The flex it has there gives a lot of movement
The Practical Engineer Emiel, as I can see the movement comes mostly from sliding/rotating discs. So I am making the spacer (white turned part in your video) a little bit thinner, and replacing one of the bracket bolts with the eccentric clamp. So after the arm is slid and rotated to the desired position the discs assembly can be tightened.
By the way, your design just looks simple and easy. Actually, it is pretty knowledge-intensive with lots of interesting ideas.
I have made it finally. My shop is pretty small too, just a little bigger than yours. So my rails are 8 ft long, and I had to add the third rail mounting block in the middle. The eccentric clamp that tightens the disks works great. The only movement left is from the rails flexibility, but it is of low frequency and easy to stop.
Thank you again for the idea Emiel!
What a cool idea (you are an encyclopedia of them to be fair) I may have to try something like this myself. Great work buddy. 👊👊👊
Fantastic Project - I've been toying with the same idea but hadn't considered the clamps you used.
Thanks! Yeah, the clamps make the difference here :) They are these ones: uk.misumi-ec.com/vona2/detail/221005521569/?KWSearch=eccentric%20lever&searchFlow=results2products
This is one of the best camera rigs I have come across online. I like the simple yet strong construction. I am a new subscriber from your shop tour video but am enjoying your channel a lot! You're going to sky-rocket on TH-cam! Great ideas!
Thanks for the kind words! Let's hope we skyrocket :)
Hi ! Thank you very much for this great tutorial. Superb look and super efficient arms. I saw a lot of models on TH-cam and I conclude that your model is the best that I have seen (according to my criteria).
Well done and all good to you
Alain from Switzerland
I see another creative Hitman
Building an elevator in living room
hahaha
Thank you SO much for this video, you just taught me that I need to get a 3D printed Tripod Head base! I've been looking for other solutions for way too long!
Awesome job Emiel! 😃👍🏻👊🏻
Thanks Fred!
Very nice setup 👍
Great video. Thanks for the tutorial.
Just found your channel and Subscribed. Thanks. I really need to build something like this for my shop.
I like you design. I've made a couple of rigs similar to this but they have alway been a little wobbly when fully extended. How stable is your design when at full reach?
It is a little wobbly at long reach, but that is mainly from the connection to my roof. I only have one beam I can drill in..
I also work out of a small shop and the tripod drives me crazy. I’m going to look to adapt your camera mount arm to my situation! Great video!
Thanks a lot! love to see your version!
How I wish to have same workshop so I could do much of what I think about. This one is amazing!
:) Start small. I started in my living room, then the garden and then I got this space.
@@Thepracticalengineer thank you for the advise. Since we have this pandemic and we have no face to face classes to our students, I temporarily made my room a small DIY shop for my projects. I made some table and hand free alcohol dispenser out of scrap woods and aluminum.
Excellent sharing thanks for sharing this
Great video and idea, I may pinch that for my workshop if you don't mind?
Hey, Yes of course! I'd love to see it.
@@Thepracticalengineer thanks👍
Very nice work
i really like this idea, thank you.
Super job mate. It's going to make filming so mush easier. I suspect you're going to get a lot of use out of it. I've never regretted making a roof mounted arm like this for my 8x6 workshop
Thanks for your comment Stephen! I've watched your video twice for inspiration. Including the hardware store run :)
@@Thepracticalengineer ha ha 👍
This gave me some great ideas for my own shop. Soooo Smart! Nice work bud!
Very handy arm dude, gonna make on for my vids to. Awesome
Wonderful solution! Yes, tripods can be problematic. This should give you some nice top-down camera views also. Looking forward to seeing this used in your next videos.
Thanks! I have already used it to film my next project, it took a bit of getting used to but I'm very happy with it.
thanks dude, this is super interesting. i'm trying to build myself a quality articulating task lamp and this should work nicely. everything sold these days is total garbage, the arms can barely hold up the light socket they're mounted to, so i guess i have to build my own.
Stunning work!!!👌🏾👌🏾👌🏾
Awesome, a genius inventor.
Nice work! I love how you maximize such a small workspace.
A thought on the joints - there are mechanisms that release tension when you press them, rather than the flip handles you've got, that would allow you to grab the joint, squeeze, and reposition. If you were to accidentally let go of the arm, the joint would lock and not drop your rig. Unfortunately Google is failing me right now or I'd supply a link.
Thanks a lot! I try to keep the place efficient.
Those mechanisms would work really well indeed :) Let me know if you remember
You should have way more suscribers, keep up the good job!!
Thanks! Share it with your friends and we'll get there :)
Very good! I could use one but I need it to hold a projector. Is this one strong enough?
Nice job and not one cookie in sight 👍 😊
That's a really nice camera arm/mount!
Love the project man!
this was an awesome video! thanks for the inspiration to build my own gear rather than buying super expensive pre-manufactured stuff
Glad to hear! Most stuff can be diy-ed
Very cool idea - you should sell the printed parts!
Cool. I can see how this could be modified for extra spot lighting too.
(Hey, Sorry to be spamming your channel this weekend. I've just found your channel and really excited by the cool projects like this one. )
For light it would work really well indeed! No problem, I'm glad you like the video
Well done!! I may have to do something similar, that would be so useful in my tiny shop!
It sure is! I've filmed with it last weekend and it took a bit of getting used to but opened up a lot of new angles and possibilities
Hey,
New subscriber here! Just wanted to say congrats on this project - it's simple yet powerful. I too suffer from the "small workshop" problem, so I'll definitely make something similar! Keep up the good work!
3d printed parts simple???
Well done
Very cool build man! interesting channel..
dude!!! This is such a great idea! I love it! All I need is a workshop!
Make one ;)
Great concept but you lost me with the 3D printed part that I have no idea where to obtain. Do you have suggestions to help your audience find these?
Excellent idea
Hello
I'm surprised you did not put any compensation spring or gas spring. There is no risk when you unscrew a screw that the camera can drop in a pinch?
Always captivating and original ideas, keep it up!
cordially
Are the files or specifications for the 3D printed parts available anywhere? I love the design but don't know what I could substitute for those elements.
What a great idea mate, as I was watching this video I thought of how I could use something like this in my shed. Great job mate keep up the good work!!
Thanks James! If not for filming a smaller version could also be used to hold a work light or something
Eres uno de los grandes no entiendo por que no tienes muchos suscriptores 😉☺😍
Ni yo
IT takes time to build it up. I'm glad you like it.
Great video!! 👍 however, may I get a link to the clamps, both camera mounts used.
The camera clamp is a Manfrotto quick release. The others are excenter clamps
¡ Te felicito por tu trabajo, exelente video, la exelencia tota hace rato vi otro videom parecido pero en madera de un señor, pensè que era lo mejor, pero me rè equivoquè, este video es lo mejor de lo mejor, sos un grande!
Looks like a great little project to try. One thing I noticed that wasnt related to your project directly that you may not be aware of. You should be very careful using the same grinders for aluminium and steel products as any build up on the wheels of aluminium can accidently cause a thermite reaction in the presence of iron and heat from the wheel friction. (Think welding railway tracks welding process) The result can be explosive and quite dangerous so make sure that you replace the wheels or discs after use or alternatively use dedicated discs for each metal to avoid accidents. Just a cautionary thought not a criticism. A friend had this happen years ago and was injured , thus the cautionary word.
It's not has useful as the high five machine but I like it😁 I need something like this for my workshop also. I'm always tripping over my tripod
Not every project can be useful. Sometimes you just have to make something for laughs, like this
Thank you so much, it was helpful and inspiring ❤️
Good job !
Top idee. De witte blokjes had je laten 3-D printen ofzo?
You are amazing!
genial! i love it, smart guy really talent full
good job!👏🏻
Awesome Idea!
Thanks!
superb bro
This is lovely.
Awesome Job! Keep it up!
Thanks!
Please can you tell me What is the length of the tubing that you cut ?
Creatief en super leuk gedaan!
Dankjewel!
Appreciate your explanations!
:)
So good! I really enjoy your content! It didn't bother me with this type of video! Me like!
Thanks! that's nice to hear!
Fantastic 👌
Marry me lol! Awesome, from one doer to another: well done!
Way crafty & Cool
Thanks Maria!
Perfect example for engineering..
Dit is wel handig!! mooi gedaan ;)
Very nice! You'll be able to get some nice angles and shots now. Does the camera vibration much at the end of the long arm?
Thanks! Yeah I'm super happy with it. It bounces for about a second or so when you touch it and then it stays steady
@@Thepracticalengineer Nice. Man, I knew your shop was small, but 2x3M ?? Hats off to you for making that work for ya!
Thanks! yeah, well when making something that fits on a desk its doable
Great job!
Thanks!
Wow eres muy ingenioso sigue así bro
Thanks!
Your welcome bro
Beau travail bravo .
Gracias!
I am jealous
Love your energy!!!
Great camera arm. May i ask what's the correct name of those thightening clamps between the arms?
They are called excenter clamps.
@@Thepracticalengineer Thank you for the quick reply
Love it emiel 👌🏻
This would be perfect for my studio!! How much would you charge to make one for me?
This is amazing! Also where can I get those stickers I see in the background? I really like the “Practical Engineer Approved” one!
Thanks a lot! The "The Practical Engineer approved" sticker is one of my Patreon rewards. www.patreon.com/thepracticalengineer
Excellent
Muy buenas creaciones amigo
Edit: buen vídeo
Gracias!
Great work!! :)
You should make a sliding gantry system very near the ceiling.
I thought about that in the past but my ceiling is very low
Tnx for sharing sir.help me a lot..keep safe every one.t.y
Glad it helps you :)
fantastic.😀