hello， this is DPS3005, it does not have separate power board, then I can put a battery pack in the case as input power, and I can charge it when the battery pack has low power
I like the reverse result part of the video which also indicates likely parts that will need replacing. This is the BEST PART OF THE ENTIRE VIDEO. "NEVER DO IT" BUT IT HAPPENS SOONER OR LATER!
thank you, and I want to use it to tell our customers, sometimes they are not so careful when connect the cables, but it is important. but at some state, some parts can be replaced, but some times it can't be fixed, because our power supply is not special tool to charge battery
I'm planning to buy one of these. It is surprisingly good how the company communicate with the buyers. I'm considering to buy DPS5020 or a RD6006. Otherthan the voltage and current rating difference are other options same or not?
hello, the operation of them are not same, and RD series power supply has bigger screen, battery charging terminal, keypad control, if you just need a stable output, you can choose DPS5020, if you want to use it more conveniently, you can choose RD series power supply, it depends on the voltage and current you need to decide the device you order
hello, the charging progress is alwadys same, CC mode first, and CV mode later, when the current is dereased to a value that it doesn't decrease, it is considered to be fully charged
Скажите пожалуйста а DPS3012 можно заряжать автомобильный аккумулятор? И как правильно подключать аккумулятор автомобильный для зарядки? Сначало подключить провода на клеммы а потом включить выход с DPS или наоборот включить выход а потом кремы?
I have a DP50V5A V1.15d, does that one need a diode? And if so, what kind and where can I buy it? I don't really plan on using it to charge batteries often, mostly as a power supply for troubleshooting, but I want to be able to use it to bring some packs back to life. Thanks RD Tech, love your products!
hello, as long as you connect the battery in the right way, there is no need to add the diode, a diode is for someone who often connect battery in the wrong way and turn on the output without checking
@@martinhyska1206 as what I said, our power supply output depends on the load you connected, it will change with the status of your load, for example if you are charging a battery, at first, it is CC mode, and the output voltage will rise, when it reaches the peak voltage, it will turn to CV mode, the voltage does not change, and current will decrease until it does not decrease, it can be considered that the charging is finished
@@rdtech9153 So after reach exact voltage, it turns CV mode. So if current go to 0, it auto turn off or i need it manualy? Can I set turn off output instead of CV mode after reach exact voltage?
@@martinhyska1206 for DPS series power supply, it does not have auto cut off function, and usually current will not go to 0, it will stay at a very low current, because there is internal consume which keep the balance, you can turn off the output anytime, no problem
if you buy the product 2 years ago and you get the diode in the package, you need to keep it , after that version diode can be removed, of course you can keep it but it will lead to some voltage drop
@@rdtech9153 I got my two DPS5005 units about 6 months and 18 months ago and they didn't include an extra diode. So i guess i can skip it then. Thank you for the reply and the product - they're great.
@@rdtech9153 ,the link doesnt works-shows only "antireverse.png it is in the owners dustbin" reverse protection circuit: >>> app.box.com/s/9196ftd47l7mgc0b7vjbsqrevbjw3sm1
dps5020 havs output reverse protection for resistor or else, but not for battery because battery has electricity. if you want to be safe when charging a battery , you can add diode and fuse like what I put in the top comment
when I am charging a 12 v 4AH battery by DPS 5020 and set the voltage and current 13.80 v and 0.40 A ,the display shows 13.80v(fluctuating) and current .0.39 A not 0.40A is it normal or abnormal operation
first you need to tell me the kind of the battery because usually 12V lead storage battery we use 14.4 to charge, and you had batter make a vedio and send to me, my email is written in the description of this video, I want to see the charging mode, and I can tell you the weather it is normal
Я тоже заряжаю блоком DPS5020 аккумуляторы разные но на выходе блока сделал защиту от обратной полярности, поставил диод шотки и плавкий предохранитель. Очень доволен работой
yes, you can connect a diode in parallel and connect a fuse in the output positive pole, I draw a picture, is it same with yours? drive.google.com/open?id=1cIBTkwrLgfEnqJHLiktExlqROZUAJPfR
@@rdtech9153 hello, picture is unavailable (says you put it in trash). Could you please restore it? UPDATE: This links works drive.google.com/file/d/1a54ZP9qwbGil5uczDqCXg9vePGR6YWhB/view
DP and DPS are buck power supply, DPH are buck boost power supply, and the differences between DP and DPS are the opreation system, you can operate the DPS system easier
@@rdtech9153 Hi, thanks for answering! My last question is the issue of input voltage. I don't decide between the 50v 5a or 50c 15a version. For each case, what source do you recommend to supply the voltage and amperage required in each case? I don't know if you have any special recommendations. regards
@@Alan96555 It depends on the current you need, and If you choose DPS5005, you can USE a 48V switch power supply and if you choose DPS5015, you can use a 60V switch power supply
Спасибо Вам, за это устройство! Есть просьба, или даже пожелание, сделайте в нем функцию замера mAh, Ah. Чтоб можно было вместо измерения мощности включать при необходимости mAh или Ah. Можно же это реализовать, в меню настроек сделать переключение?
sorry， friend， now we did not add that , for our new products, we will add Ah, and it will have a function to charge battery, please wait our new products , we should publish after one month
we use RV1 square single core flexible cord for power supply without power board, and RV2.5 square single core flexible cord for power supply with power board
please add charging programs for these units, or make completely different product line for it :). This would be great for charging big lithium battery packs (say like 10s pack for ebike) chargers this big with adjustable parameters are very expensive. I would like to charge my cells to 4.1v insted of 4.2v to increase longevity. It needs programmamble termination for A so I dont need to watch for it. Somebody has done this but i dont know how to reprogram it. github.com/lambcutlet/DPS5005_pyGUI Thanks.
sorry just like what I said, those power supply can charge the battery but they are not designed to charge battery professionally, at now we are working on our new product RD6006, time is limited.
What is powering your unit? It reads 41v in and you have nothing connected to the back of it. Magic??
hello， this is DPS3005, it does not have separate power board, then I can put a battery pack in the case as input power, and I can charge it when the battery pack has low power
I like the reverse result part of the video which also indicates likely parts that will need replacing. This is the BEST PART OF THE ENTIRE VIDEO. "NEVER DO IT" BUT IT HAPPENS SOONER OR LATER!
thank you, and I want to use it to tell our customers, sometimes they are not so careful when connect the cables, but it is important. but at some state, some parts can be replaced, but some times it can't be fixed, because our power supply is not special tool to charge battery
@@rdtech9153 Thank you for picture with burned elements, im here because reversed my dps )
@@srower666 do you fix yours already? if not, you can contact us on aliexpress or by email, let us judge the burned chips
Is the device powered with free Energie? I only can see the output connections. Batteries? But Uin is about 40V?
there is a battery pack inside, to make it easy to carry
theres nothing plugged into the input terminals at the back? where is he getting 42v in from?
hello thank you for your comment, inside the case there are some 18650 battery be used as input
@@rdtech9153 So do you have 10x18650 in series inside? Or do you have them going to an additional boost converter inside the case?
@@housinit for the power supply in the video, we use 10x18650 battery pack as input power source
I'm planning to buy one of these. It is surprisingly good how the company communicate with the buyers. I'm considering to buy DPS5020 or a RD6006. Otherthan the voltage and current rating difference are other options same or not?
hello, the operation of them are not same, and RD series power supply has bigger screen, battery charging terminal, keypad control, if you just need a stable output, you can choose DPS5020, if you want to use it more conveniently, you can choose RD series power supply, it depends on the voltage and current you need to decide the device you order
@@rdtech9153 Sure. Thanks for the assistance.
@@yowunpansilu you are welcome, if there is any needs, just send me message
Hey i have a DPS5015 manufactured in 2019, can you tell me, if i need a Diode or not? Thank you very much for the guide!
Hello, the video didn't answer when to stop charging lead battery. How to determine this moment? TYA
hello, the charging progress is alwadys same, CC mode first, and CV mode later, when the current is dereased to a value that it doesn't decrease, it is considered to be fully charged
Скажите пожалуйста а DPS3012 можно заряжать автомобильный аккумулятор? И как правильно подключать аккумулятор автомобильный для зарядки? Сначало подключить провода на клеммы а потом включить выход с DPS или наоборот включить выход а потом кремы?
you need to set the right voltage and current, connect the battery in the right way, then open the output
I have a DP50V5A V1.15d, does that one need a diode? And if so, what kind and where can I buy it? I don't really plan on using it to charge batteries often, mostly as a power supply for troubleshooting, but I want to be able to use it to bring some packs back to life. Thanks RD Tech, love your products!
hello, as long as you connect the battery in the right way, there is no need to add the diode, a diode is for someone who often connect battery in the wrong way and turn on the output without checking
I have a dps5020, but the control knob doesn't work, I want to replace it, where can I buy it and what's its name?
Hi friend
thank you for your message, I don't know where is sell, I buy it in our country, you can contact me on our aliexpress shop, i will help you
@@rdtech9153 i buy in banggood, i need encoder replace only. i will contact you on aliexpress.
@@jobylinh I saw your message at aliexpress
what about the module DPH , on higher current, the only available one is on 5A ?
DPH series only have DPH5005 and DPH3205, they can provide 5A max
@@rdtech9153 ok , hope you can make an upgrade in the future to make them capable to output more than 5A
@@pancuadrian91 thank you , we will uodate our product series to make better devices
can I use solar panel as a power a supply for DPS5020
sorry, it is not suitable because the input is not stable.
How can i set 3005 to cc mode? It seem do auto turn.
hello, the output mode depends on the load you connected, not set it by yourself
I saw many more expensive lab bench test and they pretend to have real cc, but in practice no control.
@@martinhyska1206 as what I said, our power supply output depends on the load you connected, it will change with the status of your load, for example if you are charging a battery, at first, it is CC mode, and the output voltage will rise, when it reaches the peak voltage, it will turn to CV mode, the voltage does not change, and current will decrease until it does not decrease, it can be considered that the charging is finished
@@rdtech9153 So after reach exact voltage, it turns CV mode. So if current go to 0, it auto turn off or i need it manualy? Can I set turn off output instead of CV mode after reach exact voltage?
@@martinhyska1206 for DPS series power supply, it does not have auto cut off function, and usually current will not go to 0, it will stay at a very low current, because there is internal consume which keep the balance, you can turn off the output anytime, no problem
So far i have always used a diode when charging batteries. Is that still a good practice or could is skip it?
if you buy the product 2 years ago and you get the diode in the package, you need to keep it , after that version diode can be removed, of course you can keep it but it will lead to some voltage drop
@@rdtech9153 I got my two DPS5005 units about 6 months and 18 months ago and they didn't include an extra diode. So i guess i can skip it then. Thank you for the reply and the product - they're great.
@@Leif_YT you can use a diode and a fuse to make a reverse protection, this is the way ,drive.google.com/open?id=1cIBTkwrLgfEnqJHLiktExlqROZUAJPfR
@@rdtech9153 the above link is not working. can you please update?
@@rdtech9153 ,the link doesnt works-shows only
"antireverse.png it is in the owners dustbin"
reverse protection circuit:
>>> app.box.com/s/9196ftd47l7mgc0b7vjbsqrevbjw3sm1
I have dps 5020 ..Has it output reverse protection
dps5020 havs output reverse protection for resistor or else, but not for battery because battery has electricity. if you want to be safe when charging a battery , you can add diode and fuse like what I put in the top comment
when I am charging a 12 v 4AH battery by DPS 5020 and set the voltage and current 13.80 v and 0.40 A ,the display shows 13.80v(fluctuating) and current .0.39 A not 0.40A is it normal or abnormal operation
first you need to tell me the kind of the battery because usually 12V lead storage battery we use 14.4 to charge, and you had batter make a vedio and send to me, my email is written in the description of this video, I want to see the charging mode, and I can tell you the weather it is normal
Audio is very Bad... You should consider buying a good microphone.
Good basic charging tutorial.
sorry， there is a service becide me, I delete most noise by software but still some left, and thank you
Я тоже заряжаю блоком DPS5020 аккумуляторы разные но на выходе блока сделал защиту от обратной полярности, поставил диод шотки и плавкий предохранитель. Очень доволен работой
yes, you can connect a diode in parallel and connect a fuse in the output positive pole, I draw a picture, is it same with yours?
drive.google.com/open?id=1cIBTkwrLgfEnqJHLiktExlqROZUAJPfR
Какой именно диод посоветуешь?
@@rdtech9153 hello, picture is unavailable (says you put it in trash). Could you please restore it?
UPDATE: This links works drive.google.com/file/d/1a54ZP9qwbGil5uczDqCXg9vePGR6YWhB/view
@@SvitogorX drive.google.com/file/d/1a54ZP9qwbGil5uczDqCXg9vePGR6YWhB/view?usp=sharing check this link
you can also add a reverse protection ,a diode and a fuse, here is the way to connect:drive.google.com/open?id=1a54ZP9qwbGil5uczDqCXg9vePGR6YWhB
Value of blocking diode for DPS 5020
20A diode best, 10A diode can also be used because it is only used when reverse the electrode
value for diode for 20A and 10A
@@varun07ch67 they are all ok
you are using wrong sign for anode and cathode in schematic
¿Cual es la diferencia entre sus productos DP, DPS y DPH? Saludos desde argentina.
DP and DPS are buck power supply, DPH are buck boost power supply, and the differences between DP and DPS are the opreation system, you can operate the DPS system easier
@@rdtech9153 Hi, thanks for answering! My last question is the issue of input voltage. I don't decide between the 50v 5a or 50c 15a version. For each case, what source do you recommend to supply the voltage and amperage required in each case? I don't know if you have any special recommendations. regards
@@Alan96555 It depends on the current you need, and If you choose DPS5005, you can USE a 48V switch power supply and if you choose DPS5015, you can use a 60V switch power supply
Спасибо Вам, за это устройство! Есть просьба, или даже пожелание, сделайте в нем функцию замера mAh, Ah. Чтоб можно было вместо измерения мощности включать при необходимости mAh или Ah. Можно же это реализовать, в меню настроек сделать переключение?
sorry， friend， now we did not add that , for our new products, we will add Ah, and it will have a function to charge battery, please wait our new products , we should publish after one month
@@rdtech9153
Спасибо! Будем ждать. У меня уже есть DPS 5020 но, я куплю у вас новый, с возможностью измерения mAh!)
@@Alexander_8 now we set Ah , and the final design is not settled, please wait and have a look before purchasing, make sure that is what you want
@@rdtech9153
Обязательно! Я слежу за появлением новинок в вашем магазине.
thank you
cross sectional area for input and output wire
we use RV1 square single
core flexible cord for power supply without power board, and RV2.5 square single
core flexible cord for power supply with power board
please add charging programs for these units, or make completely different product line for it :). This would be great for charging big lithium battery packs (say like 10s pack for ebike) chargers this big with adjustable parameters are very expensive. I would like to charge my cells to 4.1v insted of 4.2v to increase longevity. It needs programmamble termination for A so I dont need to watch for it. Somebody has done this but i dont know how to reprogram it. github.com/lambcutlet/DPS5005_pyGUI Thanks.
sorry just like what I said, those power supply can charge the battery but they are not designed to charge battery professionally, at now we are working on our new product RD6006, time is limited.
@@rdtech9153 could the A termination to be added to the product?
@@lxh22 no , there is not A termination
Useless!
ok, if you don't like it, just click the next video
@@rdtech9153 How can I tell whether or not I like it? It is incomprehensible!
@@JUANKERR2000 I cannot understand, you said useless.
@@rdtech9153 The audio is inaudible and/or unintelligible; by any standard that makes it of no use to me.
@@JUANKERR2000 so sorry for that