U couldn't explain this shit any better! I just broke my fade blade so I was debating if I should move to the Master blade, I'm definitely sticking to the fade blade! Thanks bro!👏🏼👏🏼👍🏼
Alot of wrong info......fade master closed is from triple zero to five zero and open ONLY to a HALF and not a ONE......and the purple andis guards fit it perfectly.......fade master's cut closer and give you a more defined look the regular masters.....fade masters are just harder to use because of how thin the fade blade is, it can sometimes gets stuck on skin pores if angled incorrectly...its a clipper for skilled barbers
No, fade master CLOSED is a 00000 and OPENS to a 000, Improved Masters start off where fade masters stop and CLOSED are a 000 and they open to a 1. Yes barbers do use fade masters on the scalp for fading but andis created them more for off the scalp cutting and defining, you may have misunderstood the video but I can assure you my information is correct
+ADTheBarber I misunderstood you on some parts but your right on the most part....except that the fade blade closed equals to a 1??? You can tell a big difference from andis master opened to The fade masters opened when you cut hair 😐😑 not the same length Adjusted at 5zero opened is .2mm and at 3zeros it opens to a half .5mm......
Great video! Where do you send your clippers to be "serviced" when they start to get loud? I noticed they changed the screws so they can be adjusted with a normal screwdriver.
Hi I’m fade master blade I use them for everything why not gave me problems so u say I can’t used guards whit fade master u kill me whit this 😭😭 I need help thank u 🙏
I got a question bro. So if their both the same clipper. Doesn’t the master in general have more throw on the lever. How could the fade blade only go from a 00000 to 000
the fade blade is very thin, when closed it’s equal to a 00000 blade. when open it’s equal to a 000 blade. the taper blade is thicker and opens from 000 to a 1 blade so they work together very well for thoroughly blended fades
For starting off barbering on yourself i know im for sure getting andis t outliers but what about the clipper i really dont know whats good and reliable
Really good video explained a lot for a rookie like me that has question.....so let me get this wright fade master is more used to just fade or in other words vanish the line around the head that you do ...and the other masters machine is used for fades and everything else use like lowering the hair from top with guards ?? I hope you understanded me
Yes, you can start with a fade master and finish the cut with the improved master. But you can use the improved for all around cutting. I would look at the fade master as more of a specialty clipper and isnt needed right away for a barber starting out
can I put the blade of a fade master on an Andis master clipper? also I use a peanut from whal to do skin fades, I use it before using the shaver but my peanut has a hard time cutting certain types of hair, it does great with thin hair, but the thick hair it struggles, my question is, does the fade faster cut really close like the peanut does? thank you in advance
Between the angle of your comb and the angle of the Clippers when you are cutting will turn how your feet comes out if you cut long enough both blades are good you just approach things differently. The blades will not make a difference to a good Barber this is all just preference as long as you get to the finish line the same way. This is coming from someone who's been cutting for over 30 years. I came from masters and style liners which is the standard till today everybody that is released today is a variation of that.
Can you use fade masters with the guards ? Is it recommended ? I heard you are not suppose to use guards with clippers that go from (00000-000) they are considered more like balding clippers ? Correct me if i'm wrong guys! Just trying to learn.
I just started cutting my own hair a week ago , I have the andis fade master , I had the lever all the way open with a 1.5 guard and the cut came out clean in my opinion, so I think you’ll be okay
What a great detailed video keep making videos. What clippers would you recommend between the andis improved masters and the wahl 5 star seniors . Thinking of buying the andis masters and purchasing the fade blade for later once I get better at cutting since i am new to barbering.
Lil Geezo -DMG yes! The blades are really what type of master each clipper is named by. The actual stainless housing & motor are the same in all the Andis master line. I bought my Improved Masters 20years ago & they came with the Fade master blade on them & after my corner teeth broke I ordered directly from Andis & they sent me the Improved blade but I wasn't sure so I called my great uncle & he broke it down for me. He had been licensed since the 50's. Now I know & prefer the flow of the Improved.
Well i say invest your self in a good oster model 10 or 76er same thing using plast guards make the cut un even when taking it down you can fade with thos too but its all up to the barber
Angel Lehder the 76er has more power than the model ten which makes it louder but now everything is cordless from 5 years ago lol crazy time flys i would say go with the 76er if money is tight if its not get the andis zr2 its pricey but its worth it you wont have to buy another one because the cord on the 76er breaks durability on that is iffy at times
Ok what’s the difference between the regular master and the improved master
U couldn't explain this shit any better! I just broke my fade blade so I was debating if I should move to the Master blade, I'm definitely sticking to the fade blade! Thanks bro!👏🏼👏🏼👍🏼
I can use blade fade for andis master ???
Alot of wrong info......fade master closed is from triple zero to five zero and open ONLY to a HALF and not a ONE......and the purple andis guards fit it perfectly.......fade master's cut closer and give you a more defined look the regular masters.....fade masters are just harder to use because of how thin the fade blade is, it can sometimes gets stuck on skin pores if angled incorrectly...its a clipper for skilled barbers
No, fade master CLOSED is a 00000 and OPENS to a 000, Improved Masters start off where fade masters stop and CLOSED are a 000 and they open to a 1. Yes barbers do use fade masters on the scalp for fading but andis created them more for off the scalp cutting and defining, you may have misunderstood the video but I can assure you my information is correct
+ADTheBarber I misunderstood you on some parts but your right on the most part....except that the fade blade closed equals to a 1??? You can tell a big difference from andis master opened to The fade masters opened when you cut hair 😐😑 not the same length Adjusted at 5zero opened is .2mm and at 3zeros it opens to a half .5mm......
+ADTheBarber hey but thx for replying Lol
+Ana Payan Fade Blade is 5 zero when closed, to 3 zero when open. A Masters Blade is 3 zero when closed, to a 1 when open.
Ana Payan que diferencia hay entre las dos ?
Great video! Where do you send your clippers to be "serviced" when they start to get loud? I noticed they changed the screws so they can be adjusted with a normal screwdriver.
Hi I’m fade master blade I use them for everything why not gave me problems so u say I can’t used guards whit fade master u kill me whit this 😭😭 I need help thank u 🙏
i want to do a 1 all around or 1 and a half top and 1 on the bottom fade. which clipper should i get
Wahl 5 stars they don't get hot as easy , light weight and really good.
hey guys where can i get a lever replacement screw please help
I got a question bro. So if their both the same clipper. Doesn’t the master in general have more throw on the lever. How could the fade blade only go from a 00000 to 000
the fade blade is very thin, when closed it’s equal to a 00000 blade. when open it’s equal to a 000 blade. the taper blade is thicker and opens from 000 to a 1 blade so they work together very well for thoroughly blended fades
For starting off barbering on yourself i know im for sure getting andis t outliers but what about the clipper i really dont know whats good and reliable
Get thd andis blacc GTX
question if i have the fade masters can i buy the masters blade and use it on it ??
yes of course, without any problem.
When u put the flat blade the bottom blade will pop in like nothing
What about trimming beards.
Bro, what do you know about the beauty master?
Really good video explained a lot for a rookie like me that has question.....so let me get this wright fade master is more used to just fade or in other words vanish the line around the head that you do ...and the other masters machine is used for fades and everything else use like lowering the hair from top with guards ?? I hope you understanded me
Yes, you can start with a fade master and finish the cut with the improved master. But you can use the improved for all around cutting. I would look at the fade master as more of a specialty clipper and isnt needed right away for a barber starting out
What does 30 and 50 equate to in inches?
can I put the blade of a fade master on an Andis master clipper? also I use a peanut from whal to do skin fades, I use it before using the shaver but my peanut has a hard time cutting certain types of hair, it does great with thin hair, but the thick hair it struggles, my question is, does the fade faster cut really close like the peanut does? thank you in advance
Yes to both questions
you think its better to zero gap the masters?
What’s better fade master or master?
Yes 👍
Which is better andis master or fade master?
That one
Great video. What do you think about adding a Yanaki Metal guard to the fade blade?
Between the angle of your comb and the angle of the Clippers when you are cutting will turn how your feet comes out if you cut long enough both blades are good you just approach things differently. The blades will not make a difference to a good Barber this is all just preference as long as you get to the finish line the same way. This is coming from someone who's been cutting for over 30 years. I came from masters and style liners which is the standard till today everybody that is released today is a variation of that.
Can you use fade masters with the guards ? Is it recommended ? I heard you are not suppose to use guards with clippers that go from (00000-000) they are considered more like balding clippers ? Correct me if i'm wrong guys! Just trying to learn.
I just started cutting my own hair a week ago , I have the andis fade master , I had the lever all the way open with a 1.5 guard and the cut came out clean in my opinion, so I think you’ll be okay
What a great detailed video keep making videos. What clippers would you recommend between the andis improved masters and the wahl 5 star seniors . Thinking of buying the andis masters and purchasing the fade blade for later once I get better at cutting since i am new to barbering.
O fast feeds w/ ceramic cutter
it is better to andis master vs fade master?
saad gharabi unless youre cutting skin close all day id say Andis master
The Master clippers helps to make the cut crisp if u don't have these clippers u must get them. Thank for sharing the info..
Hey bro. My fade blade snags even when it's not closed.
Need more skills
Why do all andis clippers/trimmers get hot so fast?
It means you taking too long after 30 minutes they get real hot
It's a basic fast to supply torque
I ordered the Andis fade masters, would I also be able to buy the improved masters blade and put in on the fade masters?
Lil Geezo -DMG yes! The blades are really what type of master each clipper is named by. The actual stainless housing & motor are the same in all the Andis master line. I bought my Improved Masters 20years ago & they came with the Fade master blade on them & after my corner teeth broke I ordered directly from Andis & they sent me the Improved blade but I wasn't sure so I called my great uncle & he broke it down for me. He had been licensed since the 50's. Now I know & prefer the flow of the Improved.
Hey bro it will work the blades are interchangeable you can go from the fade master to the master there the same hairs clippers
Thank you very much. For breaking it down brother. Keep up the good work.
Tario Thornton Thanks!
can you put regular master blades on the fade master? and vice versa?
Roddy yes
Roddy yes u can the blade is the only difference and yes I am a licensed barber
Buck Gino 👏
Me to im from texas
Ok so I just bought a fade master now all I need is the blade to make it a master ? Right or wrong ?
Jason Horne true.
Right
Thanks bro! needed this video.
I purchased both they awesome 👌
Súper cool thank you so much!
Thanks G! 👊🏽💯
Loves those Clippers!R.Johnson!Flint
Great Video!
Well i say invest your self in a good oster model 10 or 76er same thing using plast guards make the cut un even when taking it down you can fade with thos too but its all up to the barber
Wait what makes the cut uneven
Angel Lehder its just the plastic guards they tend to miss hairs having to go over and over it again
NotoriousLife since this is 5 years old which one do you recommend now ? The Oster model 10 or 76er ?
Angel Lehder the 76er has more power than the model ten which makes it louder but now everything is cordless from 5 years ago lol crazy time flys i would say go with the 76er if money is tight if its not get the andis zr2 its pricey but its worth it you wont have to buy another one because the cord on the 76er breaks durability on that is iffy at times
Very informative!
Many Many THX 👊👊🙌🙌🙌🙌
Thank you!
good info mang..thanx
+Riddick Fury No problem, thanks!
Very helpful
Thanks!
Fade master??…From a 000 to a 0??
Thanks bro
No prob! Thanks for watching!
can you put regular master blades on the fade master? and vice versa?
I don't know about vice versa but I know you can put all the blades on the regular masters.
+Animalcrackurr don't forget there's a phat master blade