hi there, i have a issue it lift of and later out slams to the ground, its losing power after 50 ft or so... any idea what the hell i do wrong? i use the honeycomb
Hi! If it is the H125 you talk about, check that you turn on fuel pump before you hit the start button as it needs that on to get a good start. It might sound like it has started ok, but if you check the VMD it actually hangs until it get enough fuel pressure. Hope you get it sorted!
Hi! Of course! I play a bit around with it still, but for now my cyclic lateral axis (x-axis) is -0.29 in sensitivity +/-. Same for longitudinal axis (y-axis). Keep in mind this is for my non self centering (dead) stick, and the settings is really down to personal preference.
@@ehindur91 my collective is set to TCA Airbus throttle , collective on 2024 is very sensitive a little movement forward helicopter jumps up from ground 1000ft/min how can I have smooth collective please ?
@@adkadk407 I would play around with the response curves and try to smooth them out a bit. It will get better once they fix it so that you are able to see the actual movement of your axis. For now I use a software called Spad.Next for my collective, but that is mostly due to me having a detent in my throttle that I wouldn't have been able to use otherwise.
It would be so much easier if they called them what they are like trim is called "rotor longitudinal." Really? WTF? I've been looking for the "trim" for days now!. Never in all my years of flight simmiTrimas trim been called anything remotely li,ke that and the entire control setup section is fweird-assird ass names that make ,you say "What is that?". aaaaaaagggghhhhhhhhhhhh
Thanks for your reply! Yeah, sorry about that! I don't like it either. I'm trying to get rid of it, might be due to my first language not being English :D
great video - thanks
I wish the X-Y graph in the hardware settings could be seen to move
Yeah, wish for that myself. Surprised they didn't seem to do anything about it in the latest patch.
hi there, i have a issue it lift of and later out slams to the ground, its losing power after 50 ft or so... any idea what the hell i do wrong? i use the honeycomb
Hi! If it is the H125 you talk about, check that you turn on fuel pump before you hit the start button as it needs that on to get a good start. It might sound like it has started ok, but if you check the VMD it actually hangs until it get enough fuel pressure. Hope you get it sorted!
Good morning, could you tell me what your sensitivity is, I couldn't get it right. Thank you captain.
Hi! Of course! I play a bit around with it still, but for now my cyclic lateral axis (x-axis) is -0.29 in sensitivity +/-. Same for longitudinal axis (y-axis). Keep in mind this is for my non self centering (dead) stick, and the settings is really down to personal preference.
@@ehindur91 my collective is set to TCA Airbus throttle , collective on 2024 is very sensitive a little movement forward helicopter jumps up from ground 1000ft/min how can I have smooth collective please ?
@@adkadk407 I would play around with the response curves and try to smooth them out a bit. It will get better once they fix it so that you are able to see the actual movement of your axis. For now I use a software called Spad.Next for my collective, but that is mostly due to me having a detent in my throttle that I wouldn't have been able to use otherwise.
@@ehindur91 hope you can make a video about spad next bind to MSFS 2024 Helicopters !
It would be so much easier if they called them what they are like trim is called "rotor longitudinal." Really? WTF? I've been looking for the "trim" for days now!. Never in all my years of flight simmiTrimas trim been called anything remotely li,ke that and the entire control setup section is fweird-assird ass names that make ,you say "What is that?". aaaaaaagggghhhhhhhhhhhh
Yeah, I know! Some people are also saying that trim doesn't work on helicopters yet. I use a "dead stick" so I don't use those trim buttons.
Good guide, but eeheeh...I dont eeeehhhh like your eeehhhhhhh :D
Thanks for your reply! Yeah, sorry about that! I don't like it either. I'm trying to get rid of it, might be due to my first language not being English :D
@@ehindur91 Your english is good. It just need to be more prepared for that. :) Good luck with future guides :)
@@Slachtis Thank you! I will improve! 👍