Matt, to make these fit you need these: TTRS 370x32mm with Rs5 brackets. The TTRS disks have the same hub size and the correct offset to fit. If you don’t run wheels that have a lot of room to fit BBK’s like OZ Ultralegerra’s/ATS Racelight’s etc etc most of the time you need to run it with spacers. My Pretoria’s didnt fit without 5mm spacers so I bought a set of Racelight wheels that did fit.
Nice work with those stonking calipers. You missed a trick whilst fitting the turbo elbow though. Turbo muffler delete. No performance gains (as such), just allows you to hear the turbo dump a little better without going down the BOV route. Might gain better airflow (as with the aftermarket elbow) due to the muffler having exhaust vents which are then closed up with a muffler delete kit. Easily accessible during elbow fitment and is 3 bolts (one hidden underneath but easy to access). Drop the pop and bang map though. 400bhp with a decat will do this naturally although not to that extent. Spoken from an MRC stage 2'ed S3 owner, Audi factory purple 😎 With no pop and bang map!
Please don't tell me no one else noticed the stickers on the calipers when he first got them🤣🤣 great video mate been watching you for ages and it's great to see the progression you have made ❤️
Matt .. you need to run TTRS 8S brake rotors.. they have a 2.5mm offset difference to others. This allows the calliper to sit central ish.. the guid pins that the pads sit between foul and grind against the brake rotor causing irreparable damage… check all clearance before you drive. Also 19 alloy wheels are forgiving and you may need spacers or an alloy that gives you natural clearance this set up is renown for temp issues also. Make sure to run a good pad and rotor combo to try combat this.
The front brakes do 70% of the braking the rear brakes only act as stabilisers for the rear end to stop it sliding around on its axis so it doesnt really Mater too much especially if you like the drift life.
hey mate , seems like you know a thing or two. I have an audi A5 b8 and im looking to do a similar job of upgrading my brakes, the car is on 19 inch audi rims , and has at least 10mm spacers. What should i go for ? any suggestions ?
I’ve learned so much just from watching your videos… I just installed a cold air intake on my A4 yesterday and you were a huge inspiration. Now only to figure out what I wanna do next 😅
@@panchit0z its not more "speed", if you don't tune the rest of your car to adapt to the intake then it wont be using all of the air. No point in getting a new intake when your ECU isn't taking advantage of it
I know you have done it but the Turbo elbow really should have been the first thing you did even before the new intake, Thats a good stage 2 number also without stressing the fuel pumps, the over run is a bit over the top though :)
The itch for a bagged s3 saloon is so bad and after watching your build on this am currently debating one on eBay in black! Front end damage no airbags deployed tho! Big ups on the content your a proper legend!🙌💜
Amazing Improvements. You almost get the power of the RS3 . I hope that all the modifications on the brakes will matched (clearance, temperature). Congratulations for all this great work. You can be proud.
I find myself just trawling your videos just to find something to watch, even watching some videos a few times. Well done creating an amazing channel that millions of people watch and love. ❤
I have loved every bit of this build, it’s been so informative and each mod has been so good to watch from start to finish. Keep smashing the content Matt! S3 and R builds have been the best on TH-cam 🙌🏻👏🏻👍🏻
That motor is a beast! Same as in the Golf R, GTI, and a bunch other MQB cars. They are good, if built right, for even more power. But, I wonder if that brake setup would also bolt up on Golfs.
Recently starting watching his videos and have to say that mostly impressed with his smile thru all the work. Have done a teeny tiny bit of work on my car, things been broken etc. and only takes like 15-20 min for the sailor talk to come out and no one is allowed to talk to me unless they are helping xD These are great videos tho!
@Matt Armstrong, you could of used some washer on the caliper bolts to shim and center the caliper on the rotor so you would have even pad wear. In doing so that would bring the face of the caliper inward and you would have to use a smaller spacer(5mm) for the rim to clear the caliper....
Mat, some of your mods are not my cup of tea (especially mega popping and banging exhausts) but I love how you just give everything a go and are prepared to work at the fixes and mods until they work as you want them to. Looking forward to more videos from you soon from all of your cars, current and future.
I honestly don't think anyone else on TH-cam comes close to your channel mate you keep making me smile what a transformation that car has been through 👌
Matts toptastic guy and his enthusiasm is Contagious!!! great show as normal- Don’t like the colour also not being a weary Willy but don’t like the body kit bit too ‘pimp my ride’.Luv the rear exhausts etc.That power is “off its head” lol.. Bet insurance is astronomical Great Entertainment to watch though peace🕊 Amaaaazing
You are just making us all proud of your knowledge and courage mate! I keep watching your vids and I keep getting impressed by what you attempt to do on these cars! Ill tell you something, not a huge fan of modified cars but I would definitely drive this one, thats for sure! Let’s see how Liam will perform with the upgrade on his car😂🤦🏻♂️😎
This build has been amazing! What a legend you are Matt! I think we should be worried about Liam getting a Asbo for the pops and bangs rather than crashing it with those beasty brakes 🤣 Top content keep it up!
Nice man. I run the 6 pot Brembo GTs on my S3. Designed and built custom 3pc forged rims to fit the brakes. Driving hard with spacers is sketch IMO. Do88 intercooler is quite a bit bigger than what you installed. Just something to look into when you're looking to push 500+
Hey Mat. The pads shouldn’t wear unevenly with the caliber being slightly off centre as long as the pistons don’t run out of travel as the pads wear down. If the pistons run out of travel then you’ll end up with with degraded performance because one bank of pistons won’t be able to push the pad onto the disc anymore.
The benefit of Silicon hoses isn’t to smooth out the airflow, they’re just more flexible than rubber and don’t degrade so they’ll last much longer without splitting.
Liam’s S3 is Sick!!! Let’s 🙏🏻 that with all the money and time spent transforming it and upgrading the power, just hope he doesn’t crash it 🙏🏻🙏🏻 Keep up the great work Matt always ❤️ your videos 👍🏻
Matt, I feel your pain. I changed the condenser on my A3 8P and it was a total wanker of a job, your right its a stupid design took me hours because I didn't want to drain the coolant. One little bolt holding a bracket on for the condenser pipes was stopping me and to get to it the whole rad pack had to come off, got it in the end but dude I feel your pain on this one, totally stupid. Also I love a big brake kit looks great!
Next build Matt: Transit Custom MSRT. Would be awesome to see a Copart van straight from the construction site and giving the full wide body MSRT treatment 👌
God I love this build so much. I wish so badly that I could have gotten into an s3 or Jetta GLI 😩 but with my business, I needed a bit more room and had to go with a Tiguan R. It’s still a really fun, really nice car, and drives incredible for a little crossover (after the right mods), but it’ll never be an s3. Maybe someday I’ll be able to outdo all of them and just get myself an Audi RS3 🤞🏼😂 6:36 the Aston sittin there, just being all expensive af Stay awesome Mat, and I can’t wait to see the Range Rover back and to see more of the Aston 🙌🏼😎
Would love to see a 911 come to Armstrong Central soon . Its one a few people must be anticipating you doing at some point I'd have thought 🤔 😄 or 718 also.. maybe Akira Nakai style kit
Omg the colour of this is lush. I hadn't seen this build as I thought the Aston would look great in purple. Obv you aren't going to do two in a similar colour.
You might need to look into some (Very very cheap) "Hubcentric rings" for those brake rotors. They are only a few dollars usually at most depending on what material you get them in (don't use the plastic ones) they shouldn't be more that $25 or 15 Pounds ish I would think.
Matt, to make these fit you need these:
TTRS 370x32mm with Rs5 brackets. The TTRS disks have the same hub size and the correct offset to fit. If you don’t run wheels that have a lot of room to fit BBK’s like OZ Ultralegerra’s/ATS Racelight’s etc etc most of the time you need to run it with spacers. My Pretoria’s didnt fit without 5mm spacers so I bought a set of Racelight wheels that did fit.
What generation rs5 brackets do you need could I use rs3 calipers and then ttrs discs?
answer him
Nice work with those stonking calipers. You missed a trick whilst fitting the turbo elbow though. Turbo muffler delete. No performance gains (as such), just allows you to hear the turbo dump a little better without going down the BOV route. Might gain better airflow (as with the aftermarket elbow) due to the muffler having exhaust vents which are then closed up with a muffler delete kit. Easily accessible during elbow fitment and is 3 bolts (one hidden underneath but easy to access). Drop the pop and bang map though. 400bhp with a decat will do this naturally although not to that extent. Spoken from an MRC stage 2'ed S3 owner, Audi factory purple 😎 With no pop and bang map!
Please don't tell me no one else noticed the stickers on the calipers when he first got them🤣🤣 great video mate been watching you for ages and it's great to see the progression you have made ❤️
Matt .. you need to run TTRS 8S brake rotors.. they have a 2.5mm offset difference to others. This allows the calliper to sit central ish.. the guid pins that the pads sit between foul and grind against the brake rotor causing irreparable damage… check all clearance before you drive. Also 19 alloy wheels are forgiving and you may need spacers or an alloy that gives you natural clearance this set up is renown for temp issues also. Make sure to run a good pad and rotor combo to try combat this.
could always delete the front fogs and port more air towards the brakes too
@@S.ASmith there’s aren’t any front fog lights
@@Mohsong then make some big ol holes
The front brakes do 70% of the braking the rear brakes only act as stabilisers for the rear end to stop it sliding around on its axis so it doesnt really Mater too much especially if you like the drift life.
hey mate , seems like you know a thing or two. I have an audi A5 b8 and im looking to do a similar job of upgrading my brakes, the car is on 19 inch audi rims , and has at least 10mm spacers. What should i go for ? any suggestions ?
You are an absolute legend you go the extra mile when you mod your cars out ,where most people would stop you carry on !!!
I’ve learned so much just from watching your videos… I just installed a cold air intake on my A4 yesterday and you were a huge inspiration. Now only to figure out what I wanna do next 😅
tune it properly so the ECU knows there will rush more air into the engine so it can supply more fuel to it!
@@BassheadMusicConnoisseur not sure if I want to work on speed or stance first 🤔
@@panchit0z work towards running engine
@@panchit0z its not more "speed", if you don't tune the rest of your car to adapt to the intake then it wont be using all of the air. No point in getting a new intake when your ECU isn't taking advantage of it
the smile Mat has hearing the exhaust after the tune is the exact smile we boys get when we install upgrades 🔥🔥🔥
Love the car! Everything especially the Lamborghini brakes!
I know you have done it but the Turbo elbow really should have been the first thing you did even before the new intake, Thats a good stage 2 number also without stressing the fuel pumps, the over run is a bit over the top though :)
The itch for a bagged s3 saloon is so bad and after watching your build on this am currently debating one on eBay in black! Front end damage no airbags deployed tho! Big ups on the content your a proper legend!🙌💜
100 hp = @ the wheels = very entertaining street racing = or fun in the wet ! = wow great thanks MAT .
Mat. Just awesome upgrades. Purple and yellow always goes. You are taking the channel to another level. 1mil subs will be yours soon.
They're orange.
Purple & Yellow = Wexford Abú!
BALLUX
@@richardsellers8671 no they are pink :D
@@MaDDeX93 He actually says in the video, they're orange.
Best brakes I ever had were on a 2016 RS Q3. 8 pot calipers on wavy rotors, boy they were good. Nice Post Mat, your talent shines through.
You should do APR Parts and software, its Amazing
Love the colour combo. Would personally paint over the lambo logo on the brakes.
But awesome stuff as always.
there is no paint of lambo logos. its a sticker
@@MatArmstrongbmx I mean paint over it so you would not see the Lamboghini logo considering it is an Audi :)
Saw this car driving behind me Saturday morning! Looks unreal in person, spent the entire time staring at it through the mirror😂
I've just heard Liam coming down the road while I was walking the dogs. Car sounds awesome and wheels are a great choice.
Amazing Improvements. You almost get the power of the RS3 . I hope that all the modifications on the brakes will matched (clearance, temperature). Congratulations for all this great work. You can be proud.
I find myself just trawling your videos just to find something to watch, even watching some videos a few times. Well done creating an amazing channel that millions of people watch and love. ❤
I have loved every bit of this build, it’s been so informative and each mod has been so good to watch from start to finish. Keep smashing the content Matt! S3 and R builds have been the best on TH-cam 🙌🏻👏🏻👍🏻
I could agree with you man XD
Liams reaction at the end was epic. @matt, you’re a legend. #realfriends
always dreamt of an audi build, preferably an S5 2012, great build you got there!
Matt u absolute legend
Your insurance premiums must be huge with engine and brake modifications.
More power for Liam what a beautiful car 💯
Man that unit door opening makes me want a unit lol
Great video. It would have been good to see a brake test before and after to see the difference in stopping distance.
16:41 lithuania mentionned 🔥 🔥 🇱🇹
Can we get a Christmas special Compilation of Mat just laughing at all the exhausts over the years please?
Good shout! (He’d also probably be perfect as the Joker in the next Batman film!) ha ha! 😂🤣😂🤣🤩🤑
That motor is a beast! Same as in the Golf R, GTI, and a bunch other MQB cars. They are good, if built right, for even more power. But, I wonder if that brake setup would also bolt up on Golfs.
pops and bangs are cool when the car actually makes power like this one
Recently starting watching his videos and have to say that mostly impressed with his smile thru all the work. Have done a teeny tiny bit of work on my car, things been broken etc. and only takes like 15-20 min for the sailor talk to come out and no one is allowed to talk to me unless they are helping xD These are great videos tho!
@Matt Armstrong, you could of used some washer on the caliper bolts to shim and center the caliper on the rotor so you would have even pad wear. In doing so that would bring the face of the caliper inward and you would have to use a smaller spacer(5mm) for the rim to clear the caliper....
Great content. Good to see the s3 back. Would love to see a motorbike on the channel
Good video Bro 👍🏾
You know you've made it when you hire a model just to open the shutters for the unit when you pull up 😂😂😂😂😂😂😂😂😂😂😂😂😂😂
Mat, some of your mods are not my cup of tea (especially mega popping and banging exhausts) but I love how you just give everything a go and are prepared to work at the fixes and mods until they work as you want them to. Looking forward to more videos from you soon from all of your cars, current and future.
Great to give it more power, always a plus.
That color is sick. Absolutelly love it!
I honestly don't think anyone else on TH-cam comes close to your channel mate you keep making me smile what a transformation that car has been through 👌
Matts toptastic guy and his enthusiasm is Contagious!!! great show as normal-
Don’t like the colour also not being a weary Willy but don’t like the body kit bit too ‘pimp my ride’.Luv the rear exhausts etc.That power is “off its head” lol..
Bet insurance is astronomical
Great Entertainment to watch though
peace🕊
Amaaaazing
Awesome stuff to see the tuning and the break upgrade. Great video series. Keep up the good work.
You are just making us all proud of your knowledge and courage mate! I keep watching your vids and I keep getting impressed by what you attempt to do on these cars! Ill tell you something, not a huge fan of modified cars but I would definitely drive this one, thats for sure! Let’s see how Liam will perform with the upgrade on his car😂🤦🏻♂️😎
Quality as always. Get some directional front discs on there when you replace 👏🏻
Completely forgot about this build😂
400bhp!!! Damn son!!! Epic work as always. Liam must be a happy bunny!!
Here in a minute from Zimbabwe 💨💨
Phil is a legend. 🔥
That sounds and looks nuts now,keep the great content coming 👌
Just binged the Maserati series, not my cup if tea but really enjoyed watching the videos. I've nearly completed your channel! Keep up the great work.
This build has been amazing!
What a legend you are Matt!
I think we should be worried about Liam getting a Asbo for the pops and bangs rather than crashing it with those beasty brakes 🤣
Top content keep it up!
Fantastic job on the S3 Matty! 🏎🔥🥇
Nice one 👍👍 Love the brake upgrade 🔥
Nice man. I run the 6 pot Brembo GTs on my S3. Designed and built custom 3pc forged rims to fit the brakes. Driving hard with spacers is sketch IMO. Do88 intercooler is quite a bit bigger than what you installed. Just something to look into when you're looking to push 500+
lil advice Matt, in order to prevent future problems with intake, change that silicone hose with aluminium pipe it will be 100times better
Glad to see you were wearing your seatbelt in the dyno Mat! 😎👍
Big thumbs up to Hannah for all the assistance she gives for your videos.
Hey Mat. The pads shouldn’t wear unevenly with the caliber being slightly off centre as long as the pistons don’t run out of travel as the pads wear down. If the pistons run out of travel then you’ll end up with with degraded performance because one bank of pistons won’t be able to push the pad onto the disc anymore.
Great Upgrades Mat 😀😀The Audi is looking and sounding awesome 😀😀❤️❤️
i cant tell you why but mat your the gift that keeps on giving i love ya videos
The benefit of Silicon hoses isn’t to smooth out the airflow, they’re just more flexible than rubber and don’t degrade so they’ll last much longer without splitting.
Lithuania 🇱🇹 love yours videos. 👊
Another great video Mat, loved the bit when you was talking about the Girth of the intercooler and not the Depth of it, lol 😂 Priceless!!
Peace out
Liam’s S3 is Sick!!! Let’s 🙏🏻 that with all the money and time spent transforming it and upgrading the power, just hope he doesn’t crash it 🙏🏻🙏🏻 Keep up the great work Matt always ❤️ your videos 👍🏻
Love the vids and the transition to the add was smooth
Matt, aka, "Mad Scientist" mixing N matching beast mode performance parts...U crack me up N like YO Style amigo!!
Hands down most entertaining TH-camr right now well done keep it up 👊🏼
That color is awesomtackular ! I always hoped the rims would have been caramel in colour like your Maserati
Hi Mat
What ever you do each week mate just get BETTER just love your enthusiasm and how easy you make it look thanks for sharing Mat 🚗👍
Lium is a lucky lad bouncing in this whippy
I'm so in love with this car guys
Matt, I feel your pain. I changed the condenser on my A3 8P and it was a total wanker of a job, your right its a stupid design took me hours because I didn't want to drain the coolant. One little bolt holding a bracket on for the condenser pipes was stopping me and to get to it the whole rad pack had to come off, got it in the end but dude I feel your pain on this one, totally stupid. Also I love a big brake kit looks great!
Next build Matt: Transit Custom MSRT. Would be awesome to see a Copart van straight from the construction site and giving the full wide body MSRT treatment 👌
Big brakes, big bhp, big audience top work 👍
God I love this build so much. I wish so badly that I could have gotten into an s3 or Jetta GLI 😩 but with my business, I needed a bit more room and had to go with a Tiguan R. It’s still a really fun, really nice car, and drives incredible for a little crossover (after the right mods), but it’ll never be an s3. Maybe someday I’ll be able to outdo all of them and just get myself an Audi RS3 🤞🏼😂
6:36 the Aston sittin there, just being all expensive af
Stay awesome Mat, and I can’t wait to see the Range Rover back and to see more of the Aston 🙌🏼😎
Wowwwww beatefoul!!! Congrats Mat
Would love to see a 911 come to Armstrong Central soon . Its one a few people must be anticipating you doing at some point I'd have thought 🤔 😄 or 718 also.. maybe Akira Nakai style kit
The music you used for the Squarespace ad was really nice. Use it again sometime
That's one lucky friend! Awesome work Mat!
That orange.😩🖤
Omg the colour of this is lush. I hadn't seen this build as I thought the Aston would look great in purple. Obv you aren't going to do two in a similar colour.
I seen this car near desford cross roads, the colour is unreal and the sound 😨😨😨😨
Your life’s inspirational bro
You might need to look into some (Very very cheap) "Hubcentric rings" for those brake rotors. They are only a few dollars usually at most depending on what material you get them in (don't use the plastic ones) they shouldn't be more that $25 or 15 Pounds ish I would think.
Love these vids, cheers for the upload mat
Phill working his magic again
Music game is strong on your videos!
Nice video Mat! Please check your front pumper alignment it is not properly aligned....
Mat i think you have forgotten that this is an S3! It looks and sounds very very loud and fast too.👌
Get rid of the landsail ditch finders. That’ll help the braking especially in the wet!
Unbelievable what you do to your cars, enjoy them all👌still waiting on the range rover though. Excellent video👍👍👍👍👍👍
What your doing it's huge inspiration for me thank you bro.
I was waiting for u to upload all day
I saw Liam's S3 the other day!!!
Loving the paint job on the a3 looks sick bro
This guy is gifted to us from god look how much he can do by himself 👀
Love this build mat 👌 would love to turn my a3 8v 2017 like that
bonito carro e um lindo gesto que fizeste para o teu amigo.
Always a pleasure to watch 😎
Mat rocking it to another level mate savage, Lamborghini brakes rule !!!!!
Keep up the great work mat and keep uploading!