I am glad to see more of these videos on the Typhoon 230/330 thanks . I just purchased the 230 and it has no manual, Everlast said they will be in after the new year .
Brother, being the owner of an Everlast tig machine and a Dynasty 280, there really is not much of a difference at the tig torch. Remember, before you get brainwashed by the Almighty true blue Miller. Electricity comes out of an outlet on the wall, it travels through the welder, there is not much you can do to electricity , to make one welder better than any other. Millers break down as often as any welder.
There is not much you can do with electricity? ROFL, yeah you are right, not much at all except form an entirely new civilisation. Trust me, there is a BIG difference in internal circuitry, the chinese ones like the Everlast will be using chinese components, not the reliable big names like IR, infineon, ST etc. Industry wont pay for expensive machines if they didn't think they were reliable.
We ha e several dealers in Europe so parts would be easy. For repairs, we build our machines to be very user friendly for repairs, most repairs can be made in just a few minutes with nothing more than a screw driver. If you send an email to sales@everlastwelders.com we can get you setup with one of our European dealers
My welding school is drowning in Blue and Red welders that drive us all crazy. Please won't you save us with some donations? You should really think about donating small numbers of machines to schools. Anytime an impressionable young welder can see your product head to head with these overpriced dinosaurs it's a win for you. Every school should have 3-5 Green booths that everybody gets up early to get to first! Full disclosure: Fronius had this idea first but nobody can figure their machines out. They're all displaying some kinda crazy error messages every time you strike an arc
I use a dynasty at the school I went to and It was an older 200 dx but brand new I used it for probably total around 40 hrs and the high frequency already went out nice machine but not worth the $ in my opinion so when it came to buying my own machine I bought a 230 typhoon love it.
Little little more control of the arc, dc pulse wave shape, higher AC frequency and pulse frequency, spot/cold weld timer…. Lot of added features for the guys that are looking for total control of every aspect
We mentioned the spot setting towards the end of the main page settings. It’s a timing setting for on time, and pause between arcs, without lifting off the pedal or a finger switch
Miller is garbage...my dynasty 280dx has less than 24 hours on it. Boards burnt up. Cooler went out and then caught on fire while I was welding. Miller isn't going to warranty it. Go figure it's just out of warranty. 14k paper weight rig set up.
I am glad to see more of these videos on the Typhoon 230/330 thanks . I just purchased the 230 and it has no manual, Everlast said they will be in after the new year .
Email status@everlastwelders.com, there is a manual available
@@everlastgenerator Hard copy that is supposed to come with the machine . Thanks
Man do I love my 255ext
Brother, being the owner of an Everlast tig machine and a Dynasty 280, there really is not much of a difference at the tig torch. Remember, before you get brainwashed by the Almighty true blue Miller. Electricity comes out of an outlet on the wall, it travels through the welder, there is not much you can do to electricity , to make one welder better than any other. Millers break down as often as any welder.
There is not much you can do with electricity? ROFL, yeah you are right, not much at all except form an entirely new civilisation.
Trust me, there is a BIG difference in internal circuitry, the chinese ones like the Everlast will be using chinese components, not the reliable big names like IR, infineon, ST etc. Industry wont pay for expensive machines if they didn't think they were reliable.
I'm interested in buying this machine but my issue is that I'm located in croatia so it would be difficult to get spare parts or service.
We ha e several dealers in Europe so parts would be easy. For repairs, we build our machines to be very user friendly for repairs, most repairs can be made in just a few minutes with nothing more than a screw driver. If you send an email to sales@everlastwelders.com we can get you setup with one of our European dealers
When are you going to make a video on the Everlast Power i-MIG 353DPi.
Have one in the shop and gearing up to film with it in about two weeks
My welding school is drowning in Blue and Red welders that drive us all crazy. Please won't you save us with some donations? You should really think about donating small numbers of machines to schools. Anytime an impressionable young welder can see your product head to head with these overpriced dinosaurs it's a win for you. Every school should have 3-5 Green booths that everybody gets up early to get to first!
Full disclosure: Fronius had this idea first but nobody can figure their machines out. They're all displaying some kinda crazy error messages every time you strike an arc
I use a dynasty at the school I went to and It was an older 200 dx but brand new I used it for probably total around 40 hrs and the high frequency already went out nice machine but not worth the $ in my opinion so when it came to buying my own machine I bought a 230 typhoon love it.
Have you tried it on Aluminium?
Yes
Owner of a mts275 great machine and again great to see you back !!!
Why would someone Prefer the Typhoon 330 over the powertig 325ext??
Little little more control of the arc, dc pulse wave shape, higher AC frequency and pulse frequency, spot/cold weld timer…. Lot of added features for the guys that are looking for total control of every aspect
MASSIVE DIFFERENCE especially for welding thin metals.
When is that 500 you speak of coming out? - Tarheel Aluminum/Edge Marine Boats.
Looking at shipping around mid Dec
I just ordered the typhoon 500 kit with cooler and cart. Should have it this week. I’m late to these comments, but just to say it
Your videos have helped me out a ton. Just set up this welder.. excited to run it
I don't a welding machine smarter than I am. Will probably buy one in the next few weeks.
What difference between this and the 325ext?
Thank you, been waiting for it! 🙏🤙
Can you tell us what's the spot option (seen at the SAVE MENU)?
We mentioned the spot setting towards the end of the main page settings. It’s a timing setting for on time, and pause between arcs, without lifting off the pedal or a finger switch
That hat needs the peak rolled a bit. 🙂
Can you rename or import/export programs?
Grrreat!
I got the 330 and its the tits ❤
I have not finished watching yet but i hope that you can save the settings and name them😊
You can 😁
Buy American...buy Miller!
Miller is garbage...my dynasty 280dx has less than 24 hours on it. Boards burnt up. Cooler went out and then caught on fire while I was welding. Miller isn't going to warranty it. Go figure it's just out of warranty. 14k paper weight rig set up.
Give a rest boomer everything is from over seas either parts or the whole product itself.