“Welcome to my first video” has better audio and picture quality than some career TH-camrs I’m watching this on my smart tv but I pulled the video up on my phone just to point out how GOOD This looks, phenomenal job
Thanks for the compliment! Perhaps I should have said "first video on my new channel"? technically I have been doing video production and youtube for quite a few years on another channel with radically different content.
I remember back in the 90s when people were into case modding. The idea of building a cyberdeck seems to be the same thing as case modding for most people. This system on the other hand, has real practical use that is in line with its theme. This makes it far and above the cyberdeck retro game system that most people build. I am glad I saw this show and tell of yours. Great job, you got mad skills!
I built mine primarily FOR running SDR. Saved our bacon during Snowpocalypse here in Texas. Was monitoring ARES/SKYWARN nets on a repeater 30 mi away, even when the power went off. LOL Pi3B running a couple of sdr's remotely near my back desk with a discone antenna on 10' of pvc pole zip-tied to my deck railing, Monitored that over SoapySDR server with my Pi4b cyberdeck+10.1" touch screen. All powered by H.F. 100W solar panel array & couple of H.F. lead-acid batteries. I pulled in 2 meter traffic from an unbelievable distance here with that antenna setup.
@@aandpman Advance warning is great so you can prepare, and just knowing, in general, what's going on helps you make more informed choices. In your specific case, when you say it saved your bacon, how so?
I love how most cyberdeck builders just build a retro, aesthetically pleasing gaming machine, yet you build a doomsday survival deck.... you just entered GOD MODE my friend!!! Respect....
Add a mini/micro SD reader and a sleeve of SD cards loaded up with music, movies, pictures, and personal documents. All that could slide into some of the spare room in the case. Maybe even in a hidden or locked compartment! Damn, now I have to build one!
The redesign I’d do... First, switch to a RockPi. You get an additional nVME port (add a 1 or 2 TB drive) eMMC space (put your OS and apps here) and you don’t have to worry about using an sd card (and get TREMENDOUSLY more storage). Next, use a power switching system (west mountain radio makes them) connected to the power pins on the 40 pin connector on the raspberry pi. This will allow battery charging and usage at the same time, so you only need one USB port for power. It allows your battery to act as a giant UPS so spikes/sags won’t hurt anything... Get a larger amperage charger. With that done replace one of the USB ports that was used for power with a connection to the USB-C port on the rPi. Remove the other port, it’s redundant. Put a set of Anderson Power Pole connectors in it’s place, connect them to the battery. Now you have a higher speed data exchange with external devices AND another power port. INSIDE the box: Get a USB GPS with an external antenna. Mount the antenna inside the box, and plug the USB dongle into a USB hub. This is where you will connect the keyboard, and web cam. You can mount the webcam above the switch (the raspberry cam should fit here if nothing else). Plug the USB hub into one port on the raspberry (a USB 2.0 port). Now most of what you pulled out as additional dongles are built in, less to lose, you’re still waterproof, and it’s always available for use. I’d build an analog voltmeter in above the keyboard (using the space I saved by hardwiring dongles) and run the wires to the battery through the keyboard hole. The analog readout feels... awesome. You just increased power availability, data throughput, device availability, and increased usability. This will be the design I go with for a first version. Thank you for getting me started, I appreciate your hard work.
For your faraday cage to work, the seams must be conductive. Beryllium copper fingers/EMI gaskets are used for this. They are not expensive and are readily available.
I never knew about that survivor library. Looks like a very cool website. Some of those links reminds me of the boyscout merit badge books. Great little books with a lot of information and sources in very few pages. Highly recommend.
LOL! You did an unboxing of ... something you built yourself. As for the Faraday cage, it might be good to line the insides of both the body and lid of the Pelikan case with copper foil, and have multiple copper braid loops bridging the two together. That box isn't going to last long, and as long as the lid is closed, this would protect you from EMP and solar storms.
That thing is beautiful; really appeals to my 'tech addiction' side. I only just paid attention to the term 'cyberdeck' today when I happened to see a few thumbnails with the word in it. I've seen a few vids before, but didn't realize this was an actual format with a community built around it. This might be for a future project.
Another win for SDR - whatever trouble befalls you down on earth, may not befall satellites above. You can download detailed weather imaging and maps as they pass overhead. Not going to be amazeballs for navigation but will tell you what to expect in the next few hours. Having a repository of satellites and their downlink frequencies is probably worthwhile.
I love this deck. I've seen peeps adding bigger batteries and ham radio units for sdr and ham net. Bests my netbook in a pelican case. Thankz for sharin baddass project
You could charge it with one of those folding solar panels that has USB ports. I know it will take some time but it can charge that Anker battery bank to full as I've done it a few times on backpacking trips.
Maybe I missed it, sorry if that is the case, but, how do you dissipate the heat from the Raspberry Pi? I assume having it in an enclosed environment would only serve to overhead the unit (if run for any length of time)
I love this. So great. My fear would be that in a real world use situation, the pi/sd card would be damaged. Is there room for backup hardware behind the screen? Even 2 clones of the SD card, and even a pi zero with appropriate cables? as an emergency backup? - Would you have space for a small solar panel by the keyboard to drip feed your battery?
Fact : they still make 386 and older processors for applications where EMP protection is a consideration. Their transistors are so massive compared to what we make today that they can survive massive electrical fields. They are used, for example, in the glass cockpit computers of the B52 because A/ it flies high enough that normal solar radiation is a problem and B/ it can carry nukes which could also be a problem. Sometimes the solution isn't a faraday cage, it's just big-ass transistors from the 80's.
Mainly because faraday cages do absolutely nothing against ionizing radiation like X-rays or gamma. Those big transistors work because they don't care if a single electron gets knocked out of position, that really doesn't flip them one bit. In contrast to the sub-nanometer processors of today, which are in the order of magnitude of "a few atoms" per transistor.
@@mandeadd not sure what you mean. Yes, a 386 is a 32-bit chip, but if you modify the Unix source to use a 64-bit variable for time, it'll still compile and run on a 386.
You need the most common car models' wiring diagrams, engine explosion diagrams, and maintenance books. maybe adding some maritime motors too would be beneficial
Definitely a Webcam as this could be used to record new historical logs of events. Which would be small enough to add above or below the ethernet switch.
Not a bad build. For my two cents, i am not thrilled about the power port design on the left side. I would want to use something other than usb ports unless those are usable as data ports as well. using the suicide cable (i am going to call it that because that is what the generator/home power equivalent is referred to) on the wrong port may result in something unwanted occurring. Also, you may be interested in a program called devilspie. I use it on my media center PCs to set kodi as maximized and remove the window boarder. That way you can have the program run nearly full screen but still have the bar on top. Back during my carpc project i used it to run foxtrotGPS and any other program in semi-fullscreen.
Thinking of building something similar to this except with the Pi 400. That and properly with wood cause I don't have access to 3d printer but i do have access to everything that needed for wood cutting/carfing.
My suggestion would be to add the ability to have an SSD that was a few terabytes. You could achieve this by adding a powered USB hub and that way you wouldn't lose any USB ports. The downside is it would use more power out of the battery.
I built a sdr in a knockoff pelican case. It is meant to run headless, I just plug a monitor and mouse into it to start DSD+ and Unitrunker and then unhook and leave it running. It has an internal 30ah lifepo4 12v battery powering a windows mini pc (I'm too dumb for linux) and two dongles/powered usb hub powered through a 5v buck converter. Dongles attach to a "t" and then a bnc jack on the outside of the case. Also a 5v 40mm case fan. Needed a relay to start as the buck converter kept frying the switch. Then had to put a diode across the relay as it caused a power surge. It'll run for two days no problem.
Ya the problem with the lightning bolt you can solve with a DC-DC UP Converter. Set the output to Approx 5.12 to 5.2 and your Pi will be able to power it's USB host controller chip properly (the reason for the lightning bolt).
I've never seen a cyberdeck use a radio. I'm sure a small fm/am radio would fit inside with external antenna or even wire for reception. Maybe a switch and small speaker for it as well. Also, how about unconventional power sources?
At some point I will talk in depth about "future plans". The better use for the deck may be to interact with more powerful radio equipment, I have not had time to digest this blog, but it looks promising: hamprojects.wordpress.com/2020/09/06/raspberry-pi-for-ham-radio/
I might go with a LTS linux distro over arch. Rolling releases can be a bit buggy at times and you don't want to get stuck with a buggy release without an ability to update.
When the cyberdeck is connected to external power and if the power goes out, will it safely switch to internal power like a UPS? is there that kind of system build into it? Also, If the cyberdeck is working on external power and if we suddenly flip the switch to internal power, will it switch safely or do we have to shut down the pi and then flip the switch? I really liked this project and might make my own one in the future. I really like the concept behind it!
Would you do a video on how you set up the kiwix software? I can't find any good resources about getting it on a raspberry pi unless it's to make it into dedicated kiwix hotspot, when all I want to do is be able to access it from the raspbian desktop.
Likely a topic for video #5. Talking about OS and software is a surprisingly lengthy topic. But for Kiwix, I was using the Kiwix reader: www.kiwix.org/en/downloads/kiwix-reader/ and then sourcing ZIM files for it.
I’m not very savvy when it comes to assembling these sorts of devices is there any way or place in which I can purchase a pre assembled one or one I can customize
You might be able to underclock the Pi 4 to save power. Not sure. Really cool build. I am totally doing this! Would love to get those 3D print designs if available...
Are these kinds of computers typically resistant to an EM pulse? I could get into this hobby if it is. If not, I'm not interested in taking on another larp. But if you can get one that is, well you've got yourself a new member
Well, EMP is overrated. But anyway, it is a plastic box, so it would not be more resistant than any other device. You can make a farraday cage if you want, inside or outside.
Did you follow a tutorial or do you have any tips for creating that Knowledge Base splash page? I followed a Kiwix tutorial but only was able to get one zim file to show up on the "localhost" page. I'd like links to other things like you, so I'm assuming there's a way to have a local html file linking to the various libraries?
@@ConsciousDoom hey! Are you able to make a video on how to set up the local host or did you use a specific guide for this? I have been trying for a while now and no luck!
If you ca find a Small 1 A 1kM WIF antenna? A XT60 Connector foe solar system charging or using Scavaged Batteries from RC cars ect for power. Zeroize functionality to prevent capture by the enemy?
I saw the milspec 6 pin connector on your build as well as Jay Doschers. I’m trying to figure out why exactly this part is added? It looks awesome aesthetically, but as far as I can tell the Cyberdeck in this configuration cannot be used as a radio or other verbal communication device. Keep in mind I’m pretty computer-illiterate.
You can actually do whatever you want with this type of connector, yes there is an aesthetic component to this, but it also means you could adjust the pi to support old equipemnt as long as you know the protocols.
Thanks! If I wanted to begin learning about connecting small electronics and wiring, what is a good resource, or even, what verbiage should I use to begin looking? Thanks!
The Adafruit and Sparkfun TH-cam channels are nice starting points. Colin's Lab on Adafruit is a nice way in for beginners (it certainly was for me), and Great Scott is a good channel if you want to take it a step up.
...just one question... Why shield it inside a cardboard box, which could disintegrate, in moisture, when you could just fully shield the inside of the case?
I get this is kind of an aesthetic design for fun, but I cringe at the military style screw coupling. Especially with it recessed the way it is. Eventually there will be lots of frustration when trying to connect something to it. But awesome video. I do love the way your build looks.
I'd think about changing the powering setup so first you can charge the battery while using it also so you can hotswap external power sources. that one is very cruical if you use any mapping service/wardriving etc. and one external supply dies
You could use an SDR dongle with this as well to connect to different satellites and get radio broadcasts. If you're ambitious you could get it to connect to TV satellites as well.
for general use totally, but if you wanna keep with the “end of the world” type theme, keeping with connector options that are easier to salvage for replacements is a good idea
Is there any way that I can obtain access to all of the saved (online) archived locality applications/informational program index(es) - (on) a Windows-based dialog box? 😎👍
So I'm building my own take on this Unit, I'm wondering how you side loaded the downloaded maps. I see that there is a feature to download the maps built into the FoxtrotGPS software, but I want to make sure I get the maps I want.
It would be cool if you could use the millitary connector to convert the cyberdeck into an emergency hartmonitor slash shocking device for cardiac arrest situations?!?! After seeing this video i am definitly making one too, is there a space where i can find these library's and maybe an example code ? Love to see more about this
Can you build one with a hook in for a portable satellite or hook into one just for the Starlink satellite dish? Just to be sure if anything does happen in the world?
I'm sure anything is possible, I prioritized items that were not dependent on larger infrastructure. While GPS is an option that is about as far as it went. I don't use Starlink so I'm not sure what goes into supporting it, but as long as it can be done on a Pi, I'm sure it's just a matter of designing and implementing.
“Welcome to my first video” has better audio and picture quality than some career TH-camrs
I’m watching this on my smart tv but I pulled the video up on my phone just to point out how GOOD This looks, phenomenal job
Thanks for the compliment!
Perhaps I should have said "first video on my new channel"? technically I have been doing video production and youtube for quite a few years on another channel with radically different content.
I remember back in the 90s when people were into case modding. The idea of building a cyberdeck seems to be the same thing as case modding for most people. This system on the other hand, has real practical use that is in line with its theme. This makes it far and above the cyberdeck retro game system that most people build. I am glad I saw this show and tell of yours. Great job, you got mad skills!
Great build! You know what would be cool to add? a usb SDR for radio listening, satellite data downloads and those things...
get one that can transmit
And that would also be perfect to run something like ATAK remotely in conjunction with other workstations and devices.
I built mine primarily FOR running SDR. Saved our bacon during Snowpocalypse here in Texas. Was monitoring ARES/SKYWARN nets on a repeater 30 mi away, even when the power went off. LOL Pi3B running a couple of sdr's remotely near my back desk with a discone antenna on 10' of pvc pole zip-tied to my deck railing, Monitored that over SoapySDR server with my Pi4b cyberdeck+10.1" touch screen. All powered by H.F. 100W solar panel array & couple of H.F. lead-acid batteries. I pulled in 2 meter traffic from an unbelievable distance here with that antenna setup.
@@aandpman Advance warning is great so you can prepare, and just knowing, in general, what's going on helps you make more informed choices. In your specific case, when you say it saved your bacon, how so?
Great Idea!
This is literally perfect and exactly what I’ve been looking to build.
I love how most cyberdeck builders just build a retro, aesthetically pleasing gaming machine, yet you build a doomsday survival deck.... you just entered GOD MODE my friend!!!
Respect....
Add a mini/micro SD reader and a sleeve of SD cards loaded up with music, movies, pictures, and personal documents. All that could slide into some of the spare room in the case. Maybe even in a hidden or locked compartment! Damn, now I have to build one!
Along with several backup sd cards of the main card.
@@nate_d376 and some empty ones just incase you wanna back others up, or have new data.
Exactly what I wanted to build one for, ultimate pirated movie storage for the end of the world
Would love to see it trying to make one myself and the more inspiration the better 😂
The redesign I’d do...
First, switch to a RockPi. You get an additional nVME port (add a 1 or 2 TB drive) eMMC space (put your OS and apps here) and you don’t have to worry about using an sd card (and get TREMENDOUSLY more storage). Next, use a power switching system (west mountain radio makes them) connected to the power pins on the 40 pin connector on the raspberry pi. This will allow battery charging and usage at the same time, so you only need one USB port for power. It allows your battery to act as a giant UPS so spikes/sags won’t hurt anything... Get a larger amperage charger. With that done replace one of the USB ports that was used for power with a connection to the USB-C port on the rPi. Remove the other port, it’s redundant. Put a set of Anderson Power Pole connectors in it’s place, connect them to the battery. Now you have a higher speed data exchange with external devices AND another power port. INSIDE the box: Get a USB GPS with an external antenna. Mount the antenna inside the box, and plug the USB dongle into a USB hub. This is where you will connect the keyboard, and web cam. You can mount the webcam above the switch (the raspberry cam should fit here if nothing else). Plug the USB hub into one port on the raspberry (a USB 2.0 port). Now most of what you pulled out as additional dongles are built in, less to lose, you’re still waterproof, and it’s always available for use. I’d build an analog voltmeter in above the keyboard (using the space I saved by hardwiring dongles) and run the wires to the battery through the keyboard hole. The analog readout feels... awesome. You just increased power availability, data throughput, device availability, and increased usability. This will be the design I go with for a first version. Thank you for getting me started, I appreciate your hard work.
Sounds awesome would love to see a video on your build.
@@TerminalHeatSink This was a burn wasn't it?
Hey you ever build this world like to see it
For your faraday cage to work, the seams must be conductive. Beryllium copper fingers/EMI gaskets are used for this. They are not expensive and are readily available.
Isn’t Beryllium toxic or poisonous?
@@williamegbertjr7971 Many metals are; don't eat them.
@@williamegbertjr7971 the dust from working it certainly is; it causes problems from inhalation.
@@williamegbertjr7971 Yes, beryllium is toxic, especially dust. Beryllium copper has a very low percentage of beryllium
That only depends on the wavelengths you want to keep out, though. Higher GHz frequencies means that you need to fill up the narrower gaps.
I'd add an extension USB cord for the GPS dongle. This way you can get it higher if needed.
There's something techy about extending a telescopic rod.
Yeah, the problem is space, I try to keep everything self contained. I think I will end up doing an accessories satchel.
I never knew about that survivor library. Looks like a very cool website. Some of those links reminds me of the boyscout merit badge books. Great little books with a lot of information and sources in very few pages. Highly recommend.
sweet design, love the attention to detail and saving of written knowledge and information saved on/in the cyberdeck, awesome work - great inspiration
Instead of replacing the Pi4 with a Pi3, you could underclock and undervolt the Pi4 in a settings config file to bring its power usage down.
LOL! You did an unboxing of ... something you built yourself.
As for the Faraday cage, it might be good to line the insides of both the body and lid of the Pelikan case with copper foil, and have multiple copper braid loops bridging the two together. That box isn't going to last long, and as long as the lid is closed, this would protect you from EMP and solar storms.
That thing is beautiful; really appeals to my 'tech addiction' side.
I only just paid attention to the term 'cyberdeck' today when I happened to see a few thumbnails with the word in it. I've seen a few vids before, but didn't realize this was an actual format with a community built around it.
This might be for a future project.
I can say, it is a fun project, but very time consuming.
The effort you’ve poured on the cyberdeck is awesome. Its like knowledge and information from beginning of man up to present. 👍👍
This is so cool. I haven't heard of these knowledge bases before.
damn it... i really tried not to... but now i need my own!
Another win for SDR - whatever trouble befalls you down on earth, may not befall satellites above. You can download detailed weather imaging and maps as they pass overhead. Not going to be amazeballs for navigation but will tell you what to expect in the next few hours. Having a repository of satellites and their downlink frequencies is probably worthwhile.
Purely based on I/O, best deck I've seen.
This is very cool. And I like the Division, so that's another plus
I dig it.
Subbed.
Look forward to watching the rest once Xmas smoke settles.
Great video. This speaks to my prepper soul. Nice work!I I am working on an offline set of ham radio tools on the Pi that I use in the field.
Sick content! So glad I found this channel.
I love this deck. I've seen peeps adding bigger batteries and ham radio units for sdr and ham net. Bests my netbook in a pelican case. Thankz for sharin baddass project
Hey, the project is great. We want to feature it on our channel (with proper credits). If it sounds good, then kindly reply.
You could charge it with one of those folding solar panels that has USB ports. I know it will take some time but it can charge that Anker battery bank to full as I've done it a few times on backpacking trips.
Fwak! Ive found the channel that speaks my type of lanugage Thanks tons!!
Excited to see the wiring! thank you for taking the time !
Maybe I missed it, sorry if that is the case, but, how do you dissipate the heat from the Raspberry Pi? I assume having it in an enclosed environment would only serve to overhead the unit (if run for any length of time)
That bulky CRT feeling! Although a bit thinner box would be better, the overall feeling is fantastic and i would not change it at all.
finally someone used 40% ortho
P.S: i like how you decided to put whole netgear switch without gutting it :)
I love this. So great. My fear would be that in a real world use situation, the pi/sd card would be damaged. Is there room for backup hardware behind the screen? Even 2 clones of the SD card, and even a pi zero with appropriate cables? as an emergency backup? - Would you have space for a small solar panel by the keyboard to drip feed your battery?
As a matter of fact yes. I didn't really cover it, but in theory there is space for some backups.
Fact : they still make 386 and older processors for applications where EMP protection is a consideration. Their transistors are so massive compared to what we make today that they can survive massive electrical fields. They are used, for example, in the glass cockpit computers of the B52 because A/ it flies high enough that normal solar radiation is a problem and B/ it can carry nukes which could also be a problem. Sometimes the solution isn't a faraday cage, it's just big-ass transistors from the 80's.
Mainly because faraday cages do absolutely nothing against ionizing radiation like X-rays or gamma. Those big transistors work because they don't care if a single electron gets knocked out of position, that really doesn't flip them one bit. In contrast to the sub-nanometer processors of today, which are in the order of magnitude of "a few atoms" per transistor.
Is this why the Unix 2038 thing is a concern? Those embedded systems are 32-bit aren't they?
@@mandeadd not sure what you mean. Yes, a 386 is a 32-bit chip, but if you modify the Unix source to use a 64-bit variable for time, it'll still compile and run on a 386.
@@TheNefastor oh sweet yeah that was my concern. Thanks for the answer man.
Love this!
Great video and very inspiring! I'd add a SDR, a small radiation detector and maybe a crank radio
That's some great quality video, keep it up!
Thank you!
I just came across this…..awesomely amazing I love it.
Very cool, looks absolutely badass!!
Cyberdeck, a computer that can take a beatin'. Post apocalypse.
This is awesome! Keep the videos going, I am definitely going to build one of these!
Having the Bat power and Ext power separate is a great idea. Good job dude.
Manual will be a good addition to this box
You need the most common car models' wiring diagrams, engine explosion diagrams, and maintenance books. maybe adding some maritime motors too would be beneficial
Definitely a Webcam as this could be used to record new historical logs of events. Which would be small enough to add above or below the ethernet switch.
This would be more difficult than using a phone video. Just upload from phone to this device. Better quality and more versatile
Not a bad build. For my two cents, i am not thrilled about the power port design on the left side. I would want to use something other than usb ports unless those are usable as data ports as well. using the suicide cable (i am going to call it that because that is what the generator/home power equivalent is referred to) on the wrong port may result in something unwanted occurring.
Also, you may be interested in a program called devilspie. I use it on my media center PCs to set kodi as maximized and remove the window boarder. That way you can have the program run nearly full screen but still have the bar on top. Back during my carpc project i used it to run foxtrotGPS and any other program in semi-fullscreen.
Thinking of building something similar to this except with the Pi 400. That and properly with wood cause I don't have access to 3d printer but i do have access to everything that needed for wood cutting/carfing.
Add a local mirror of the raspberry pi and arch linux repositories, if room including the sources
My suggestion would be to add the ability to have an SSD that was a few terabytes. You could achieve this by adding a powered USB hub and that way you wouldn't lose any USB ports. The downside is it would use more power out of the battery.
That is a pretty neat work up.
This would be great for my AREDN setup! Great job.
I know my desktop would be useless without power. Which is why I love this idea! CYBERDECK ! HEK YEA
This is freaking awesome! This shit be on every computer at all times!
Subscriber #430
Keep up the good work man! Not sure what you're target audience is but you've got my attention for sure!
1. Add a USB card reader
2. Include a waterproof case containing Multiple Micro SD cards for storage (media, music, etc)
I built a sdr in a knockoff pelican case. It is meant to run headless, I just plug a monitor and mouse into it to start DSD+ and Unitrunker and then unhook and leave it running. It has an internal 30ah lifepo4 12v battery powering a windows mini pc (I'm too dumb for linux) and two dongles/powered usb hub powered through a 5v buck converter. Dongles attach to a "t" and then a bnc jack on the outside of the case. Also a 5v 40mm case fan. Needed a relay to start as the buck converter kept frying the switch. Then had to put a diode across the relay as it caused a power surge. It'll run for two days no problem.
What is this? Some kind of apocalypse laptop?
I Think that's the idea
Ya the problem with the lightning bolt you can solve with a DC-DC UP Converter. Set the output to Approx 5.12 to 5.2 and your Pi will be able to power it's USB host controller chip properly (the reason for the lightning bolt).
Great video :) I'm your thousandth subscriber
This is awesome.
This is completely amazing. I really wanna make it.
I've never seen a cyberdeck use a radio. I'm sure a small fm/am radio would fit inside with external antenna or even wire for reception. Maybe a switch and small speaker for it as well.
Also, how about unconventional power sources?
At some point I will talk in depth about "future plans". The better use for the deck may be to interact with more powerful radio equipment, I have not had time to digest this blog, but it looks promising: hamprojects.wordpress.com/2020/09/06/raspberry-pi-for-ham-radio/
SDR with external antenna is good enough AM/FM radio receiver. you do need upconverter to be able to scan lower band frequencies.
I might go with a LTS linux distro over arch. Rolling releases can be a bit buggy at times and you don't want to get stuck with a buggy release without an ability to update.
Damn great project, great vid.
When the cyberdeck is connected to external power and if the power goes out, will it safely switch to internal power like a UPS? is there that kind of system build into it?
Also, If the cyberdeck is working on external power and if we suddenly flip the switch to internal power, will it switch safely or do we have to shut down the pi and then flip the switch?
I really liked this project and might make my own one in the future. I really like the concept behind it!
Absolutely brilliantly done! And great presenting style too! I'm sure the military will snap you up soon!
Would you do a video on how you set up the kiwix software? I can't find any good resources about getting it on a raspberry pi unless it's to make it into dedicated kiwix hotspot, when all I want to do is be able to access it from the raspbian desktop.
Likely a topic for video #5. Talking about OS and software is a surprisingly lengthy topic. But for Kiwix, I was using the Kiwix reader: www.kiwix.org/en/downloads/kiwix-reader/ and then sourcing ZIM files for it.
I'd be interested in your software setup too. Especially if you're setting up an offline WiFi hotspot (not just a Kiwix hotspot).
this is great! have you thought about adding a couple of desiccant bags. and maybe a mini usb mouse, in case the touch screen fails.
Probably been asked before... any chance we you could make and sell the screen/button frame please?
Awesome build! Does anyone know if that software to translate live speech is compatible with the raspberry pi yet?
I am going to make one with other radio apporatti and going to call it "Mr. Comms". It will have electronic warfare gear such as a grape jam catapult.
I’m not very savvy when it comes to assembling these sorts of devices is there any way or place in which I can purchase a pre assembled one or one I can customize
I'm still waiting for someone to build Pennies computer book from the Inspector Gadget cartoon.
Is your Cyberdeck mostly hollow inside? Is there any room in there to hide stuff?
Holy sht this thing is awesome
You might be able to underclock the Pi 4 to save power. Not sure. Really cool build. I am totally doing this! Would love to get those 3D print designs if available...
Are these kinds of computers typically resistant to an EM pulse? I could get into this hobby if it is. If not, I'm not interested in taking on another larp. But if you can get one that is, well you've got yourself a new member
Well, EMP is overrated. But anyway, it is a plastic box, so it would not be more resistant than any other device. You can make a farraday cage if you want, inside or outside.
Did you follow a tutorial or do you have any tips for creating that Knowledge Base splash page? I followed a Kiwix tutorial but only was able to get one zim file to show up on the "localhost" page. I'd like links to other things like you, so I'm assuming there's a way to have a local html file linking to the various libraries?
I would also be interested in tips and tutorials on this.
Stay tuned for whenever I manage to get the next video done.
@@ConsciousDoom hey! Are you able to make a video on how to set up the local host or did you use a specific guide for this? I have been trying for a while now and no luck!
If you ca find a Small 1 A 1kM WIF antenna?
A XT60 Connector foe solar system charging or using Scavaged Batteries from RC cars ect for power.
Zeroize functionality to prevent capture by the enemy?
I'm with ya brother. SHTF and I'm fucking playin Tetris!!!!!!!!!!!!!! You the man!!
This is awesome and I am definitely making one of these o7
I saw the milspec 6 pin connector on your build as well as Jay Doschers. I’m trying to figure out why exactly this part is added? It looks awesome aesthetically, but as far as I can tell the Cyberdeck in this configuration cannot be used as a radio or other verbal communication device. Keep in mind I’m pretty computer-illiterate.
You can actually do whatever you want with this type of connector, yes there is an aesthetic component to this, but it also means you could adjust the pi to support old equipemnt as long as you know the protocols.
Nice Projekt, but what happen if some big EMP is happen? It‘s look like your deck is a plastic box???
Looks great! Is Jay Doscher's website inactive now?
Does anybody have the most up to date version of this? I just bought a Rasberry Pi 5 and want to build something like this
Thanks! If I wanted to begin learning about connecting small electronics and wiring, what is a good resource, or even, what verbiage should I use to begin looking? Thanks!
The Adafruit and Sparkfun TH-cam channels are nice starting points. Colin's Lab on Adafruit is a nice way in for beginners (it certainly was for me), and Great Scott is a good channel if you want to take it a step up.
...just one question...
Why shield it inside a cardboard box, which could disintegrate, in moisture, when you could just fully shield the inside of the case?
Question, how much for you to build it for someone?
I get this is kind of an aesthetic design for fun, but I cringe at the military style screw coupling. Especially with it recessed the way it is. Eventually there will be lots of frustration when trying to connect something to it. But awesome video. I do love the way your build looks.
I'd think about changing the powering setup so first you can charge the battery while using it also so you can hotswap external power sources. that one is very cruical if you use any mapping service/wardriving etc. and one external supply dies
i think an sdr Receiver seems to be a good addition to this device ;)
other than aesthetics is there a big benefit to this over one of the surplus toughbooks running windows or linux?
You could use an SDR dongle with this as well to connect to different satellites and get radio broadcasts. If you're ambitious you could get it to connect to TV satellites as well.
How much is €1 boxes to the latest purchase one because I've tried to build one I can't even get this raspberry pi 55 software to work properly
How do you connect the cyberdeck to the internet? To what is the network switch hooked up to?
I wouldn't have gone with a type A USB cable for power in, I'd have gone with a C or Mirco but otherwise love it.
for general use totally, but if you wanna keep with the “end of the world” type theme, keeping with connector options that are easier to salvage for replacements is a good idea
@@zacharywright165 Or use connectors that are positively bulletproof like aviation-style bayonet lock types, or Neutrik/Cannon/etc. type ones.
Is there any way that I can obtain access to all of the saved (online) archived locality applications/informational program index(es) - (on) a Windows-based dialog box? 😎👍
So I'm building my own take on this Unit, I'm wondering how you side loaded the downloaded maps. I see that there is a feature to download the maps built into the FoxtrotGPS software, but I want to make sure I get the maps I want.
It would be cool if you could use the millitary connector to convert the cyberdeck into an emergency hartmonitor slash shocking device for cardiac arrest situations?!?!
After seeing this video i am definitly making one too, is there a space where i can find these library's and maybe an example code ?
Love to see more about this
Can you build one with a hook in for a portable satellite or hook into one just for the Starlink satellite dish? Just to be sure if anything does happen in the world?
I'm sure anything is possible, I prioritized items that were not dependent on larger infrastructure. While GPS is an option that is about as far as it went. I don't use Starlink so I'm not sure what goes into supporting it, but as long as it can be done on a Pi, I'm sure it's just a matter of designing and implementing.
Where is the battery?