Thanks for the great videos. I am wondering if the cvt belt can be replaced in the vehicle without removing transmission. The bands broke. I think it's the belt band. It's a long thin peices of metal and they are in the pan and one is stuck above the valve body. Or could it be anything else? What should I do replace or rebuild transmission. Stepper motor code came on for it.
Gracias por los vídeos de la transmisión jf010e, pero me podría apoyar con un vídeo para el cambio de aceite y filtro de la misma por favor, de antemano muchas Gracias, saludos desde Monterrey Nuevo León, México!
Thanks for the very detailed videos. We rebuilt a JF010E but after putting back in vehicle the reverse is not spontaneous, vehicle barely moves after pushing the accelerator pedal. The forward drive is good. Any ideas on what could be the issue?
Regards, I have a problem that I can't solve on jf010e for now, I changed the torque converter, the valve in the pump, the pistons and rubbers, the blades, all the valves on the valve body. belt .... everything except snapring in variator, when I stop on a small hill the car moves back and only over 1500 rpm tries to move forward.
Thanks for the great videos. I am wondering if the cvt belt can be replaced in the vehicle without removing transmission. The bands broke. I think it's the belt band. It's a long thin peices of metal and they are in the pan and one is stuck above the valve body. Or could it be anything else? What should I do replace or rebuild transmission. Stepper motor code came on for it.
Helloe does Nissan Xtrail with QR20 engines have the same cvt gearbox with Nissan Serena with same engine
Thank you sir.. i'm using this JF010E
Great 👍
What's the name of the solenoids on the valve body of a 2012 Nissan Murano
Gracias por los vídeos de la transmisión jf010e, pero me podría apoyar con un vídeo para el cambio de aceite y filtro de la misma por favor, de antemano muchas Gracias, saludos desde Monterrey Nuevo León, México!
Thanks for the very detailed videos. We rebuilt a JF010E but after putting back in vehicle the reverse is not spontaneous, vehicle barely moves after pushing the accelerator pedal. The forward drive is good. Any ideas on what could be the issue?
found the issue after watching video again, it was the snap ring for the ring gear. the ring gear was seated lower due too missing snap ring.
Does the transgo flow control valve work well .. or the sonnax oversized is better.. this your friend from Switzerland..
sonnax Oversized valve works better. you do need a ream tool for it but it works way better then transgo drop in valve.
On a 2012 Nissan Murano CVT transmission what is the name of all the solenoids on the valve body
Where is the Rome solenoid at
2:47
I need to see the breakdown of the valve body with all the solenoids and the name of all the solenoids on a 2012 Nissan Murano
Regards, I have a problem that I can't solve on jf010e for now, I changed the torque converter, the valve in the pump, the pistons and rubbers, the blades, all the valves on the valve body. belt .... everything except snapring in variator, when I stop on a small hill the car moves back and only over 1500 rpm tries to move forward.
I'm just trying to find out the name of the solenoids
hola buenas tardes . por favor podria realizarlos en español .... para la comunidad latina que lo sigue , saludos desde VENEZUELA