6 Things to Know and Be Ready For ll Thunder Lasers Nova 51 Tips
ฝัง
- เผยแพร่เมื่อ 15 ธ.ค. 2022
- In this video, I hit on the 6 things you need to have and know about your Thunder Laser before it arrives. We go through the whole install process, but feature the things you have to do before you can fully set the machine up. Things to have that Thunder Laser doesn't send with the kits. If you know some things that I left out, please let me know in the comments.
Here is a full list of the items in this video and a link:
20 amp Breaker
This depends on the style and brand breaker box you have. Match the brands and type to what you have.
20 amp Outlet
www.amazon.com/dp/B003ATTR8Y/...
6 inch Hole Saw
www.amazon.com/dp/B00IOX3ZPW/...
6 inch Vent Hood
www.lowes.com/pd/IMPERIAL-6-i...
6 inch Pipe Clamps
www.amazon.com/dp/B07HRSDVSD/...
HVAC Tape (Optional)
www.amazon.com/dp/B00A7I5L86/...
Air Compressor Regulator (Optional)
www.amazon.com/dp/B0057D8MCI/...
Distilled Water
www.amazon.com/dp/B07VD4KN28/...
Thunder Laser USA @ThunderLaserUSA
www.thunderlaserusa.com
Follow along with us on:
Instagram: / statedwoods
Tiktok: / statedwoods
www.statedwoods.com
Email: statedwoods@gmail.com - วิทยาศาสตร์และเทคโนโลยี
![Genshin Impact | กาชา Clorinde ไวฟุนั้น ควร C6 [เทสตัวละครต่อ]](http://i.ytimg.com/vi/SOVaBvL7K20/mqdefault.jpg)
Thunder USA needs to get their act together. Thunder South Africa delivered my Nova 51, split it to get it into my office, re-assembled the machine, did the whole installation, set it up in lightburn with a license for the first year and then after checking the laser alignment, gave me 4 hrs of training on the spot. The only thing I had to do was provide the hole for the exhaust fan. They even brought the water for the chiller, a sheet of 3mm black and clear acrylic each , a self inking stamp and stamp rubber, 2 sheets of 3mm MDF, a sheet off brushed gold on black and a sheet of white on black. That's what you should get when you spend this much money on a machine.
Great info man. Got my Nova 51 on the way and this probably saved me a few headaches.
Glad I was able to help. You will love it!
Getting ready to purchase a Thunder laser, and I found this video to be extremely helpful! Thank you! Count me in as a subscriber!
Great tips! One thing I'd suggest is moving the exhaust fan as close to the outlet as possible, and reduce any unnecessary 90* bends. You want to create as much "pull" as you can to optimize the exhaust.
Thank you so much for this
Excellent video and presented very well. Thank you for this info!
Thanks so much for the support
This is super helpful. I have been looking to upgrade my Glowforge and things like knowing about the electrical needs is good to know ahead of time.
Glad it was helpful!
I was told to go down in size, you should use duct tape to make that seal. I found that using a clamp immediately put holes in my hose when I tried to put it on my similar style vent.
I just had to be careful. But I didnt make any holes. You def could though.
Good Video. BUT, you should always have multiple fire extinguishers, make sure you use the Halon type not the powder kind. Halon is expensive but when (not if) you have a fire the Halon won’t damage the machine.
This video is exactly what I needed to prepare thanks! I am trying to decide between the Nova 51 & 63 making a final decision in the next few days any thoughts on choosing one vs the other? I'm curious why you went with a 6" wall vent vs 8"? Appreciate it.
I went with 51 because of size. If you have the room, always go bigger. You cant really find 8 inch vents anywhere
@@Statedwoods Thanks for your feedback I am going with the 63 then! Ok got ya I thought you may have chose a 6" vent for a particular reason. I found a few 8" options on Amazon.
Jesus H...I don't think a factory rep could have explained it better!
They should pay me for it 🤣
Great set-up video. Is there something you should do if you accidentally touch the laser tube to get off any potential finger prints? It also looks like you have a lubricator on your filter system...I am assuming you have no oil in there. If not, what is it being used for. Thanks.
Thanks. I would just use a dry cloth to barely remover any oil or finger prints from touching the tube. I have an oiler in line on my system but nothing in it. It doesnt do anything on my setup. If i used pneumatic tools more I would have oil in it.
@@Statedwoods Makes sense. I like that set-up you have and might do a piggyback to have two filters. Thunder Laser shows a really cheap double-filter unit you can get on Amazon but I paid too much for my laser to put a $25 filter on it.
This is a great video for those that don't know how to set up their machine. Correct me if I'm wrong but I don't thing it matters if you touch the outer tube??
Treat it like a fluorescent tube. Oil from skin and create hot spots and lead to burn out.
finalizing my Nova 51 130w purchase right now....curious how you got the machine off the crate, and how possible it is to do alone?
Check out my unboxing video. I show that exact thing and I do it myself. It can be done easily.
First! How are ya?
Im good Gary. How you my friend?
Thanks for this fantastic video! Lots of tips that I haven't seen in other videos.
My Nova 51 shows up in a few weeks
@@JohnMarkClark your going to love it. Congrats!
Nice video, but please put stereo sound when your talking. It's annoying to have stereo music but mono when your talking when your wearing headphones. And why have the audio change from left to right channel?
Very nit picky. His presentation was just fine
I never said it wasn't good information, I just said it was annoying having the sound go from right channel to left side. I'm sure it would be fine if you were listening with normal speakers, but when you use headphones it's very annoying.