SMART 453 OEM Brabus Ambient Lighting install guide Part 1 covering dash,centre console and CODING.

แชร์
ฝัง
  • เผยแพร่เมื่อ 15 ธ.ค. 2024
  • Welcome to the video on how to install the OEM ambient lights into the smart 453. This is part one covering the Dash and centre console. Parts are listed below.
    ForTwo -
    A4538250200 - Optical fibre right door. (1 Piece)
    A4538250300 - Optical fibre left door. (1 Piece)
    A4535409304 / A453540930464 - wiring harness for the door. (2 Piece)
    A4539066500 - LED module for doors and centre rings. (4 Piece)
    A4538250000 - Optical fibre centre ring right. (1 Piece)
    A4538250100 - Optical fibre centre ring left. (1 Piece)
    A4538200000 - Led module for the driver, passenger footwell and glove compartment. (3 Piece)
    A4538200100 - Led module for the centre panel over the cup holders. (1 Piece)
    ForFour -
    A4538251100 - Optical fibre right door. (1 Piece)
    A4538200200 - Optical fibre left door. (1 Piece)
    A4539066500 - LED module for front doors and centre rings. (4 Piece)
    A4538250000 - Optical fibre centre ring right. (1 Piece)
    A4538250100 - Optical fibre centre ring left. (1 Piece)
    A4538200000 - Led module for the driver, passenger footwell and glove compartment. (3 Piece)
    A4538200100 - Led module for the centre panel over the cup holders. (1 Piece)
    As always, any questions drop me a comment or email me on c350e.project@gmail.com. Check out the Instagram pages Matt_MV_Automotive and Urban_Overland_UK
    DISCLAIMER: This video is NOT endorsed by, directly affiliated with, maintained, authorized, or sponsored by Mercedes-Benz, Smart, BMW or any other vehicle manufacturers featured in these videos. All of the videos on this channel are for entertainment viewing purposes only. Due to factors beyond the control of myself, I cannot guarantee against improper use or unauthorized modifications of this information. I assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Myself, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not myself.

ความคิดเห็น • 17

  • @Jano1998
    @Jano1998 ปีที่แล้ว +1

    Thank you. I needed something to show me how to get to the climate control thing to remove it and thanks to this video, I think I can do it now ☺️

  • @Nico-du9ko
    @Nico-du9ko 10 หลายเดือนก่อน +1

    Legend

  • @mczeljk
    @mczeljk 7 หลายเดือนก่อน

    Thanks for that video. Very informative!
    Got 2 questions:
    Is the rev counter necessary? I’ve read on the internet that a rev counter was necessary for the ambient light to work but found thta bit odd, as you could order ambient light without the rev counter from the factory.
    And secondly: did you buy new inner door panels or did you drill a hole for the light? The door panels with ambient light have a different partnu ber so I reckon they are different

  • @Musicforyourears100
    @Musicforyourears100 4 หลายเดือนก่อน

    Hello! Great job there! Are this part numbers the same for the non uk cars?

    • @mvautomotive7092
      @mvautomotive7092  4 หลายเดือนก่อน

      @Musicforyourears100 I believe so yes. If not they can convert them in the dealership.

  • @luigipirozzi3221
    @luigipirozzi3221 2 ปีที่แล้ว

    Hello,and congratulations on the video, you have a new subscriber. I found the plug for the led driver side, because in the plug you show in the video there are 2 wires while in mine the plug is 4 wires? I can't find the passenger side wires, could you tell me where to look?

    • @mvautomotive7092
      @mvautomotive7092  2 ปีที่แล้ว +1

      Thank you. Mine were tucked right down the side wrapped in masking tap.

  • @rikyz1
    @rikyz1 2 ปีที่แล้ว

    hello, nice tutorial ! are this items "A4535409304 / A453540930464 - wiring harness for the door. (2 Piece) " for left and right door or I have to buy 2 sets (2 cable for each door)? Did you make also a tutorial to upgrade doors ? thanks

    • @mvautomotive7092
      @mvautomotive7092  2 ปีที่แล้ว +1

      They are one each side for the fortwo. For the forfour they are not needed.
      Upgrade to door?

    • @rikyz1
      @rikyz1 2 ปีที่แล้ว

      @@mvautomotive7092 i mean if you filmed the installation to the doors. I drive a forfour, so to light the front doors I need only the optical fibers (left/right) and the diodes (left/right) ?

    • @mvautomotive7092
      @mvautomotive7092  2 ปีที่แล้ว

      @@rikyz1 your need a diod for each door and for the front doors these optical tubes.
      A4538200200 left side
      A4538251100 right side
      Is it not in the video? They just clip in place. Your see a rectangular hole to the rear of the door handle

    • @w11111nner
      @w11111nner 9 หลายเดือนก่อน +1

      @@mvautomotive7092hi ya! sorry to reply after that long time, do I need to take off the door panel itself on my ForFour?

    • @mvautomotive7092
      @mvautomotive7092  9 หลายเดือนก่อน +1

      If you have the forfour aslong as you have the rev counter on dash the harness will be there. Fortwo will need one cable per door. Check by popping the window switch out. Your see a black cable sloted in behind. If it's not there you may not have the main harness and can't upgrade the lighting. Hope that makes sense?

  • @Zoidmau5Gaming
    @Zoidmau5Gaming 2 ปีที่แล้ว

    When will u be uploading the next part
    And where can I order these parts from

    • @mvautomotive7092
      @mvautomotive7092  2 ปีที่แล้ว +2

      Direct from mercedes or mercedes part supplier. Iam currently finishing off the landrover for the Moroccan adventure next month. Will be back onto my other vehicles soon after.