How to fix karcher fc5 spray strip down rebuild(part 2

[@alfindigo]

Thanks, ours had a blockage in the same place. I just took the roller cover off, unscrewed the brass jet and blew through it, something came out the pipe and it works perfectly again.

[@felicitythomson3397]

I'll try that first ..thanks

[@SpikesMavic]

Gread vid , what size was the Torx screwdriver you used ?

[@lukeme8304]

To be honest I carnt quite remember t20 no dought,

[@lukeme8304]

And thank you for positive comment

[@robertharrison3936]

After using my fc 5 any excess clean water drips through until the tank is empty. Is this correct

[@lukeme8304]

There may be a bit of debri or even material round the tank base or where it goes throw then bottle placed in place

[@omackiewicz7817]

My fc5 dead. Only blinking...

[@lukeme8304]

I beleave the motor will only ha e a certain expectancy on the brushs prior to needing brushs , not sure if it was brushless . Possible connector loose or need unplugging and re plugging terminals .
Hope this helps