วีดีโอ

why record audio with a background noise ? FFS

I have just gone to use mine and its blocked. This is my 3rd and last Karcher. My first was mains powered and the motor packed in after 13 months then I bought a battery version and that stopped charging after 13 months then I have gone back to mains power and its not spraying water. Thats why I am here!

Thanks, that was an easy £12 fix

really poor quality of device. after 2 years of using it is dead.

My Touran just stopped blowing air too, none. Could this be the case also?

Thank you, dud. Clear instructions. However, you don’t have to remove all the plastic housing. You could just remove the bottoms (the black cover/splash shield + the yellow plastic cover on top of it) to access the tube and the nozzle.

I would like to ask if you have a video also for FC7 thank. Congratulation for you video very very useful

most a vízelosztó gumi tömődött el illetve kitört a vízvezető tömlő ami a réz fúvókához meg.

Még egy ilyen hitvány mocsok szemét terméket!! Azt tervezem szétverem amit rögzítek és felnyomok a Youtubra...nagy megkönnyebbülés lenne, lehet sor kerül rá!

What controls the water flowing down to the nozzle? There doesn't seem to be anything that controls when the water flows. And how is it pressurised to make it spray water?

Thx mate. I will try

Helped me loads!! Thanks for that!

Gread vid , what size was the Torx screwdriver you used ?

Gread vid , what size was the Torx screwdriver you used ?

Gread vid , what size was the Torx screwdriver

we just blew to the small black tube and it opened. Didn't have to open the whole thing. Just the two screws holding the tube. 💨👍

An Infant minding it's own business: Pitbull named princess:

Красавцы

Mini miles has gone

Love them bro wish had the fund 😎😎💪🏾

07⁸²⁶⁴⁶¹⁰⁷³

After using my fc 5 any excess clean water drips through until the tank is empty. Is this correct

#expansiontank #watertank

thank you, gave me all the Information I needed to strip clean and put back together

My spin scrubber stopped working. If I connect the motor directly to the power supply it works. When it's assembled no power past the battery contacts. Anybody have any ideas?

Fantastic Video thanks- have exactly the same problem and this will allow to fix it. :)

Thanks for your videos, helped me clear the spray pipe in ours.

Man, useful video, but nextime please record on wide display, not standing pleas..And speak clearly pleas, it's barely to hear you. Though thanks.

thanks for this, great video. i have the opposite problem where the pipe constantly drips and drains the clean tank even when not using the machine. it never used to do this, so i have no idea what is broken!

Thanks. This worked for me an saved me buying a new machine.

Thanks for this it did help but I didn’t fancy the half day to sort this problem. If you take the brush housing off by pressing the grey button you get to see a brass jet. This is what blocks with cleaning fluid because it is ridiculously narrow. Get a small drill and clear it and make it a bit larger. Thing works a treat then. Tip. After cleaning is finished half fill the fluid tank with warm water and flush through the system for a few mins to stop the cleaning fluid blocking up. Won’t buy another. Pain in the arse!

Thanks mate! Helped me fix mine too!

Thanks! This helped me fix this exact problem!

Good at cleaning bad at lasting broke within two years

My fc5 dead. Only blinking...

The big button that releases the yellow top of the head (see 2:46) clamps the hose if it's not fully engaged. Check that before stripping it down, like I just did.. the pipe wasn't blocked, it was clamped off by the button not engaging properly.

Thanks, ours had a blockage in the same place. I just took the roller cover off, unscrewed the brass jet and blew through it, something came out the pipe and it works perfectly again.

Maybe a little bit strange, but this and part 2 helped me, to open this f**n machine :) Thanks!

Thank you. Excellent video which has solved my problem on both my machine. However I did manage to unblock the pipe without taking off the main housing. Just had to take off the black surrounding at the bottom and blew the pipe out.

This machine is just absolute shit. I bought one myself but it is absolutely my very last Karcher

This slipping clutch sound is familiar tome. Two units in 3 years lost to bearing corrosion: th-cam.com/video/kZec5nYdlxY/w-d-xo.html Now, that water (formula) problem is very common. The brass nozzle corrodes and lime builds on it. A few drops of limestone removal in upside-down position, a needle, lots of patience. The mechanism is quite clever. It will not let water go thru when the yellow roller cover is removed. The latch of that cover pinches the rubber tube that feeds liquid by gravity. So unless you act on it it like the cover would do, no water will flow. Well hidden in the cover are 2 rubber membranes. They are actuated by the vacuum and open the valves to let the water flow. If their malfunction is suspected, soak the roller cover in diluted limestone remover for a few hours. Or pop the screws to disassemble it. Overall a good but holly unreliable device, engineered with programmed obsolescence in mind. Good luck !

I put a meter on the two contacts on the handle (looks like holes on an outlet) and the voltage is 3.7 volts. That motor looks fairly beefy. Curious what it would think if I put 12 volts to it.

Hello, my FC5 doesnt spray water at all. What can i do?

can actually unblock spray pipe without taking apart whole machine. I just managed to release the jet from the bottom of the pipe and then used a ball pump from the top end to pump air through clearing the pipe Then put the jet back on end of pipe screwed it in place and machine was good to go like new. Just 2 screws undone and redone though out whole process of just a few mins. Just need to careful with pipe while removing jet and replacing it. Dont want to stretch it too much or risk tearing in or pulling it out from top connection.

can actually unblock spray pipe without taking apart whole machine. I just managed to release the jet from the bottom of the pipe and then used a ball pump from the top end to pump air through clearing the pipe Then put the jet back on end of pipe screwed it in place and machine was good to go like new. Just 2 screws undone and redone though out whole process of just a few mins. Just need to careful with pipe while removing jet and replacing it. Dont want to stretch it too much or risk tearing in or pulling it out from top connection.

was it working in the end? hard to tell on video.

Had same problem today, took off the yellow plastic jet cover, used car tyre electric inflater with a needle nosed adaptor to jet some air down through the rubber pipe. Blockage cleared in a few seconds, water then came through okay. Looks like this will be an ongoing nuisance with this design. This is the second time in 4 months I have had to unblock feeder pipe.

I would like to buy one Can you tell me how much the battery lasts please

Just done the exact same fix to mine . Thanks for the vid bud .

Wouda been nce to see how you got the motor out!