the optimizer controls fuel sence its fuel injected. makes up the difference with the pipe and snorkel sence they lean out the mixture. and very easy to use, just keep a watch on that spark plug and make sure it stays beer bottle brown! good luck!
it was pretty easy, i bought it used and i had to make a small bracket to hold the bottom bolt, not sure if i was missing somthing or not sence it was used, and no, its fuel injected, thats the optimizers job. thanks
for the most part performance wise no its just opening up the exhaust..i love hmf though iv had alot of luck with them and stick with them. now on some quads you can take to much back preasure out and can hurt them, my 700 didnt seem to care either way. the penland has a baffle to help with that but i couldnt tell any difference, good luck!
well i would take it a new one would be easy..i bought mine off ebay and i think it was missing a thing or two. i had to make a plate for the bottom to bolt up to. but besides that it was not bad at all. and mines fuel injected so thats why i have the optimizer. Though most of the time just a pipe you can get away without jetting. not always though. if you did a full exhaust or any air intake mod you definitly need to jet your carb. keep that spark plug beer bottle brown. good luck!
It's not a torque converter it's the quiet core insert. Look at their website you'll see. The torque range modifier is completely different. The reason it's more high pitch with it in is it's supposed to quiet the quad like 6 decibels. I had to put one in my HMF cause it was too loud for around my house(2006 outlaw 500). You said you bought it used so I'm assuming the guy before you put it in.
+llwizzoll I find it easiest to get to it from the left side. take the inner fender well out of the way. It takes like a 4" or 6" socket extension to reach down through the head. Nice brown color spark plug is the best. good luck!
i could imagin some, of course sucking the air out of an airbox before breathing actual outside air is loseing power too..w/e it takes to keep the water out!
wanting a HMF performance muffler for my 550h1...there are so many to choose from,does it really matter cause i can't find one for a 550h1...the closes is for a 650 and a 400....pls answer
@gouthro12345 you can buy them on the hmf site. i found mine on ebay, i want to say they around about 250ish $ new, i paid 125 for mine used on ebay! good luck!!
![[Re:all TREASURE] EP.6 in 방콕ㅣ🚩 쩡캠의 방콕 투어 빵 마이 와이 👍](http://i.ytimg.com/vi/uyFw-nItA_s/mqdefault.jpg)
![No more vacuum fuel pump problems! GY6 Won’t start: FIX! [PROBLD PULSER UNIT]](/img/n.gif)
the optimizer controls fuel sence its fuel injected. makes up the difference with the pipe and snorkel sence they lean out the mixture. and very easy to use, just keep a watch on that spark plug and make sure it stays beer bottle brown! good luck!
it was pretty easy, i bought it used and i had to make a small bracket to hold the bottom bolt, not sure if i was missing somthing or not sence it was used, and no, its fuel injected, thats the optimizers job. thanks
for the most part performance wise no its just opening up the exhaust..i love hmf though iv had alot of luck with them and stick with them. now on some quads you can take to much back preasure out and can hurt them, my 700 didnt seem to care either way. the penland has a baffle to help with that but i couldnt tell any difference, good luck!
the optimizer richens up the fuel/air ratio for the exhaust and air intake mods. and yes very easy, plug and play
Cool, I want to do the same thing to my 2008 AC 700EFI 4x4. The problem I'm having is finding parts
well i would take it a new one would be easy..i bought mine off ebay and i think it was missing a thing or two. i had to make a plate for the bottom to bolt up to. but besides that it was not bad at all. and mines fuel injected so thats why i have the optimizer. Though most of the time just a pipe you can get away without jetting. not always though. if you did a full exhaust or any air intake mod you definitly need to jet your carb. keep that spark plug beer bottle brown. good luck!
It's not a torque converter it's the quiet core insert. Look at their website you'll see. The torque range modifier is completely different. The reason it's more high pitch with it in is it's supposed to quiet the quad like 6 decibels. I had to put one in my HMF cause it was too loud for around my house(2006 outlaw 500). You said you bought it used so I'm assuming the guy before you put it in.
It is hard to find used parts. I use eBay a lot. Good luck with yours!
Got did t break the boot that's good. Wire did come out of boot I think I just push it back in.
If you don't mind please tell me how to get to the spark plug. I'm not having luck reaching it.
+llwizzoll I find it easiest to get to it from the left side. take the inner fender well out of the way. It takes like a 4" or 6" socket extension to reach down through the head. Nice brown color spark plug is the best. good luck!
i could imagin some, of course sucking the air out of an airbox before breathing actual outside air is loseing power too..w/e it takes to keep the water out!
I got it didn't break the boot that's good. Now I have to get wire back in boot
wanting a HMF performance muffler for my 550h1...there are so many to choose from,does it really matter cause i can't find one for a 550h1...the closes is for a 650 and a 400....pls answer
What do you think the best model of arctic cat ?
Hey you got any mods to your quad for the tires?
was it easy to install your hmf penland and do u have to jet the carb?
@gouthro12345
you can buy them on the hmf site. i found mine on ebay, i want to say they around about 250ish $ new, i paid 125 for mine used on ebay! good luck!!
What dose the optimizer do?? Is it easy to use
what do you have on there for tires
27" mud lite xtr's. they are great. a little to aggressive for me but they do great in the mud and don't slow it down to much.
and what are the rims on there
14" ss I think. I know they are 14" anyway
thanks I got a 700 as well what years yours
mines a 2007. if had it about 5.5 years. doo far so good. have had to replace to axles but that's some of the tires fault.
mines a 2011 but it sat new for 3 years got it last year been a good but I wanna make it better what would you recommend for tires I want 26's
12 inch rim