Some times a full magazine will cause a jam try only put 27 to 28 rounds in a 30 round magazine I have had this happened on a lot of different fire arms riffles and pistols.
And it actually comes with multiple so you don’t have to worry about size and it’s $10 for like 6 I think so not a bad deal, and sorry it took a while I’m at work
Naw one was $500 here in NC, ATI 300 blackout ARP, I got that after I got the ATI 5.56 rifle…honestly both runs flawlessly. I’ve had my 5.57 for 5 years now. I will admit I replaced all the internal parts with high end parts, the trigger, hammer, grip, and it’s they’re the perfect AR (for me). Lightweight, reliable, (durability I don’t know because I’m not doing torture tests by banging it on trees or running it over). My advice, if you want a light weight inexpensive AR this would be ideal. Just upgrade the inner parts you’ll have a gem.
🤣🤣🤣 "It's like 5, 10 pounds." Wow, that's helpful... 7 out of 10 for a gun that had several malfunctions in one mag?!?! That's absolutely terrible. You can build an ar that isn't made out of plastic and will actually function properly for another $100. You need to take a safety class because your trigger discipline is nonexistent.
Some times a full magazine will cause a jam try only put 27 to 28 rounds in a 30 round magazine I have had this happened on a lot of different fire arms riffles and pistols.
Have mines now for 3 years an runs flawless with any mag I'm guessing I've got the diamond in the ruff........thank you god
Nah I think I didn’t oil it enough but I still did
Nice gun I have one as well
Sick bro🔥 AR pistole my next gun buy for sure.
Don’t do it
Did you oil it before you shot it when I got mines it jammed up after I cleaned and oiled it up no more problems
I filed the point of my safety detente to quiet it down. Didn't want the loud click and have a deer hear it.
Change the springs and the buffer , and oil it up… it’ll never jam or misfire
What ammo are you shooting ? 5.56 or 300 blackout ?
Can you replace the polymer part on this ? saw one for $450 but don’t feel comfortable with that plastic
You can get a palmetto state armory lower that should help
Yep it's milspec
Did you have to add a bottom rail to add the handgrip?
Yes I had to get a m lock rail
@@awannabewithagun2975 appreciate u, can u send me the link to that specific rail size
Yes
www.amazon.com/REERON-Picatinny-Aluminum-Section-Accessory/dp/B09BJ9NQ23/ref=mp_s_a_1_6_sspa?crid=QN81CV38X0BM&keywords=m+lock+rail&qid=1677399711&sprefix=m+lock+rail%2Caps%2C300&sr=8-6-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzTktMUzIwT1RXTU1CJmVuY3J5cHRlZElkPUEwODYyODcwMlkzN1VNTTBHNDhSVSZlbmNyeXB0ZWRBZElkPUEwNjA1MDg1M1AyQlVJVlVFNlYyQSZ3aWRnZXROYW1lPXNwX3Bob25lX3NlYXJjaF9tdGYmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl
And it actually comes with multiple so you don’t have to worry about size and it’s $10 for like 6 I think so not a bad deal, and sorry it took a while I’m at work
Any updated reviews ?Regrets?
Nah it’s still runs good
It has metal reinforcements!
Y the front grip if u only use one hand
I used both but since it’s a pistol I demonstrate it with one hand
Paying that much might as well go palmetto or something..
I mean it’s still not a bad choice
Oil it bro it won't jam
what's the red dot?
It’s an old center point
Pawn that tomorrow morning
😂😂 nah g
Why not go with the GLFA it's only $350. And not plastic!
Dang I didn’t pass my mind at the time
Only 350 where?
Mine was 590
You may as well register yours no way “$590” no ROI
Wtf. I just built a fully metal arp for 430🤣🤦🏽♂️
Damn those run for $300 where I’m at Y’all gun stores taxing no cap 🧢
Naw fr they taxing n ga
Naw one was $500 here in NC, ATI 300 blackout ARP, I got that after I got the ATI 5.56 rifle…honestly both runs flawlessly. I’ve had my 5.57 for 5 years now. I will admit I replaced all the internal parts with high end parts, the trigger, hammer, grip, and it’s they’re the perfect AR (for me). Lightweight, reliable, (durability I don’t know because I’m not doing torture tests by banging it on trees or running it over). My advice, if you want a light weight inexpensive AR this would be ideal. Just upgrade the inner parts you’ll have a gem.
Should have got a radical
Yes I looked into it but this got my attention more tbh
@@awannabewithagun2975 radical is better
Showing your hands not the gun😂
Palmetto state armory is better quality
Yes I looked into it next time
🤣🤣🤣 "It's like 5, 10 pounds." Wow, that's helpful... 7 out of 10 for a gun that had several malfunctions in one mag?!?! That's absolutely terrible. You can build an ar that isn't made out of plastic and will actually function properly for another $100. You need to take a safety class because your trigger discipline is nonexistent.
Alright fortnight