Note: depending on your amp/headphones/speakers you may want to turn the “MIC” on or off. For this video I had it off but with headphones it sounds a lot better with the mic setting on
Jack Lantern thanks man and yeah you might be able to tweak it a lot better than I did. I only had this pedal a couple days when I recorded this. Fun unit
@@Ian-Threaded yes i know this was a year ago, but you can add either the noise gate or the znr to fix the squeal, the noise gate is like a traditional noise gate where the znr "doesn't affect your tone" meaning you still get some of the little things like pick scrapes and it doesn't cut the notes off at the set level
I just used it for a gig. Guitar went straight into this and then into a 100W Acoustic Head before going into a 2x12 katana head. Worked well. I just keep the amp I’m using on the cleanest setting possible so it represents the board as best as possible. Not as good as my 5153 head but board, cheap head, and cheap cab is like $400 total where taking a 5153 would be over $1000 just in the head alone
@@Ian-Threaded any other videos or suggestions for more patches I thought this one guy had a ton but none of them are working yet idk if I'm doing something wrong or he's just faking them his comments are all positive but I'm following the video to a T any idea why my patches arnt working or sounding right I just got the g1x last week
@@SlothMilk I have to look at it again but there is one setting that makes a huge difference. Might be cab sim or headphone setting if I remember but it can make it sound really bad imo
Don’t remember having that turned on. Probably something you just have to try on and off with your individual amp since every amp responds differently. I definitely have the mic setting off I believe
@@sgtpeppers4216 if you have your board going into an amplifier that has a cabinet or is a combo, I would not use the cab sim feature because you are simulating a speaker cabinet when you already have one
PitchSHFT: Te permite bajar o subir la afinación de la señal de entrada. Muy practico, porque no hace falta hacerlo en la guitarra. Si la tienes afinada en E puedes hacer que suene en Eb, D o C.
It’s just going into the clean channel of the 5153 head. Video is just to show off the G1x. I could have put it into a different head’s clean channel but it was already hooked up and has a very good clean channel
@@BagusWibisono I used the Diezel amp preset on the G1x so it is trying to emulate a Diezel amp. I also used the Marshall 4x12 cabinet emulation on the g1x
Note: depending on your amp/headphones/speakers you may want to turn the “MIC” on or off. For this video I had it off but with headphones it sounds a lot better with the mic setting on
Noiceee. I noticed these zoom units have a high pitched squeal when lots of gain is added. Nice playing aswell
Jack Lantern thanks man and yeah you might be able to tweak it a lot better than I did. I only had this pedal a couple days when I recorded this. Fun unit
@@Ian-Threaded yes i know this was a year ago, but you can add either the noise gate or the znr to fix the squeal, the noise gate is like a traditional noise gate where the znr "doesn't affect your tone" meaning you still get some of the little things like pick scrapes and it doesn't cut the notes off at the set level
Thank you
My man 💪🏻 sounds great, ive had this pedal for a long ass time and just now realized you can edit patches lmao. Thanks for this!
fucking awesome dude
Geison Rocha thanks man I am really enjoying this pedal. Cant beat the price
Patching for the first time on G3Xn as a guitar shred noob and it already sounds better than the default metal setting on the G3Xn 🙏 thanks
Tq bro
Niceeee
Yessss amp do matters
Sound's sick bruh
Thanks brother 🤘
I found it....i will try
Hey can i ask a question. If you for example turn off a pedal like chrous will the pedal stop for a second? Thanks!
No its instant, i have it
Hey man. Great tone. Can you tell me if this processor would be enough for gigs?
I just used it for a gig. Guitar went straight into this and then into a 100W Acoustic Head before going into a 2x12 katana head. Worked well. I just keep the amp I’m using on the cleanest setting possible so it represents the board as best as possible. Not as good as my 5153 head but board, cheap head, and cheap cab is like $400 total where taking a 5153 would be over $1000 just in the head alone
@@Ian-Threaded Great. Thanks.
Thanks for the video, I was looking for a patch with this kind of sound! Btw that's a sick riff, is it yours or from a song?
Thanks for the kind words and all credit for the riff goes to While She Sleeps - Hearts Aside Our Horses
@@Ian-Threaded thanks again man! Cheers
What is the song on the demo?
Do you also have a metalcore patch for Nu-X MG300?
You send me tabs for what you played or something similar. Trying out your patch now
I can it’s just hearts aside our horses by while she sleeps. Tabs are available many places
@@Ian-Threaded any other videos or suggestions for more patches I thought this one guy had a ton but none of them are working yet idk if I'm doing something wrong or he's just faking them his comments are all positive but I'm following the video to a T any idea why my patches arnt working or sounding right I just got the g1x last week
@@SlothMilk I have to look at it again but there is one setting that makes a huge difference. Might be cab sim or headphone setting if I remember but it can make it sound really bad imo
Hi, possible to save this as a preset and upload somewhere on the net please?
I would like to do that but I am not sure how. Is that possible to do?
I would like to do that but I am not sure how. Is that possible to do?
If you direct it to a guitar amp, do you turn on your amp/cab simulator?
Don’t remember having that turned on. Probably something you just have to try on and off with your individual amp since every amp responds differently. I definitely have the mic setting off I believe
@@Ian-Threaded so if i want to make my own patch for future gigs is it better to turn off the amp/cab sim?
@@sgtpeppers4216 if you have your board going into an amplifier that has a cabinet or is a combo, I would not use the cab sim feature because you are simulating a speaker cabinet when you already have one
But ultimately the rule is always this. If it sounds good - it is good. Try both ways and let your own ear be the final judge
What's the cabinet? Was that just a regular loudspeaker?
It was an unpowered 16 ohm 2x12 cabinet with vintage 30s in it
@@Ian-Threaded Tks for the reply man. Greeting from Indonesia
este patch funcionaria con amplificadores de altos watts?
este parche funciona con cualquier amplificador que tenga un canal limpio
i dont have DZ DRV, where i can got it?
@@fuanes1309 this actually has stumped me. Mine came with it? I’m not sure if you can update or something to get it? Is it the same exact zoom g1x4?
Btw what is the patch volume?
Let me get back to you on that. Typically I think I have it pretty loud like 80 or higher etc
No pusiste cual es el efecto que esta primero
El primer efecto no se usó y apagó todo el video.
PitchSHFT: Te permite bajar o subir la afinación de la señal de entrada. Muy practico, porque no hace falta hacerlo en la guitarra. Si la tienes afinada en E puedes hacer que suene en Eb, D o C.
Check out my band on Spotify and I’ll love you forever Threaded - Terminal
open.spotify.com/track/2uFwxm7GaTViPCsOSrF1oI?si=3kiGDEXOSjWmXSOuQWpGmQ
what is the first chain you turning off ?
Not sure but I left it off the entire video. Might have been something I was trying but wasn’t quite happy with so I left it our
Are you matching the evh with the zoom?
I was not trying to make it sound like the EVH5153. I was just trying to make a good metal sound
@@Ian-Threaded did you use the evh distortion?
@@felixsuarez3940 no distortion. The EVH is on the clean green channel
Let me know, is it sound of the G1x ? So 5150 tube head for what?
It’s just going into the clean channel of the 5153 head. Video is just to show off the G1x. I could have put it into a different head’s clean channel but it was already hooked up and has a very good clean channel
@@Ian-Threaded the riff did you play is that from the G1x? They have same 5150iii sound ?
@@BagusWibisono all sound is from the G1x. The 5153 was set to a clean flat setting. There is no distortion from the 5153.
@@Ian-Threaded are G1x have 5150 preset? If it does, what the name?
@@BagusWibisono I used the Diezel amp preset on the G1x so it is trying to emulate a Diezel amp. I also used the Marshall 4x12 cabinet emulation on the g1x
why my device dont have DZ DRIVE?
Me neither
You need to plug it to pc and download the effects . They have software for windows pc
hay una death metal?
Hay. no tengo un video mostrando el death metal
sería increíble nadie lo hace todavía, saludos !!! @@Ian-Threaded
@@agenciaextremo9266 ¿Qué tono de banda te gustaría que recreara?
@@Ian-Threaded algo tipo deicide, brutality, death, hypocisy.. algo death metal técnico...
Please, create death metal, please!!!