OK I am doing it. I have assembled a Dremel Drill Press converted to a 3 axis Mini Mill. All the 3D Printed parts are done and tonight I received the extra Motors, Power Supply, Arduino CNC Shield, Motor Drivers, but I forgot to order the Motor Couplers so Minor Delay. Cutters are due this week, If this works I will be able to machine Model Train Chassis for special trains that were not offered in S Scale the scale i work in. Thank for a great tutorial . D
Where do you buy a TRUSTWORTHY shield. I've read that some are FAKE and will DESTROY your Arduino! Their pins are soldered incorrectly and seem to be a Chinese fake.
thank you for your informations :) can you maybe help me on how to control the stepper motor speed with a potentiometer knob? how would i implement that?
Very informative narration. I have designed and fabricated my CNC Plotter. My project can be accessed on my channel danjunk-DIY on You tube. I am using CNC Shield board. But I forgot to enable the CNC shield by putting a jumper at " Enable header pins" as you explained. Even then, my machine is working fine. I don't understand this "Enable" aspect of the CNC Shield. Please clarify. I am controlling my plotting using Universal Gcode Sender platform.
I thought about doing this, but ended up not doing so as I haven't built something specific yet. You can buy a low cost SD card reader that connects to an Arduino and have the Arduino send the g-code commands to the Arduino running GRBL.
OK I am doing it. I have assembled a Dremel Drill Press converted to a 3 axis Mini Mill. All the 3D Printed parts are done and tonight I received the extra Motors, Power Supply, Arduino CNC Shield, Motor Drivers, but I forgot to order the Motor Couplers so Minor Delay. Cutters are due this week, If this works I will be able to machine Model Train Chassis for special trains that were not offered in S Scale the scale i work in. Thank for a great tutorial . D
Please make a video. How to uplode grbl on arduino nano.
Where do you buy a TRUSTWORTHY shield. I've read that some are FAKE and will DESTROY your Arduino! Their pins are soldered incorrectly and seem to be a Chinese fake.
Dont worry about that, it's not a thing.
Thank you very much for making these video. They are really usefull for beginners like me.
Thanks for watching!
thank you for your informations :) can you maybe help me on how to control the stepper motor speed with a potentiometer knob? how would i implement that?
Very informative narration. I have designed and fabricated my CNC Plotter. My project can be accessed on my channel danjunk-DIY on You tube.
I am using CNC Shield board. But I forgot to enable the CNC shield by putting a jumper at " Enable header pins" as you explained. Even then, my machine is working fine. I don't understand this "Enable" aspect of the CNC Shield. Please clarify. I am controlling my plotting using Universal Gcode Sender platform.
Hello sir
I made cnc machine Arduino uno grbl z and y only one direction run pls
hi, what i need to do to mount 2 motors on x and 2 on y?
Will the cnc shield work with pi 3
Thank you sir❤
Thanks for watching!
Great timing! If only this setup could read SD cards, it would be perfect bc of the price and size
Maybe I2C connect to a separate 382p that reads SD cards and communicates via a small LCD and have some manual jogging buttons?
Oh look! A rabbit hole
I thought about doing this, but ended up not doing so as I haven't built something specific yet. You can buy a low cost SD card reader that connects to an Arduino and have the Arduino send the g-code commands to the Arduino running GRBL.
Thanks for watching!
Nice!
Thanks for watching!