Here are some already made versatile retractable USB cables. As an Amazon Associate I earn from qualifying purchases (at no extra cost to you): Retractable 3 in 1 Multi -USB Cable: amzn.to/3BCujpM Retractable 4 in 1 Multi-USB Cable: amzn.to/3Q5hxEh
I was trying to do the same thing for my headset but I wasn't able to figure out what should be the arrangement of the spring. Thank you dude. Great video.
You saved me a few bucks but it was worth knowing how this thing works. Couldn't believe there was a ball bearing that small inside. Almost lost it when I opened the unit up. I don't understand the mechanics fully, but just know that the ball bearing rolls along the track and jams up at certain points. Quite ingenious really.
Was trying to fix my computer mouse that has this same retractable reel mechanism and this was the only helpful video I found because it shows the inside & how it works - thanks a bunch! Got some sore fingers now haha
My retractable charger's cover accidentally popped and it didn't retract when I try to fix it and I thought I damaged it but gladly it didn't. I came across your video, and it worked! I'm glad I didn't lost any parts. My charger is now fixed. Thank you so much for the great help!
The tiny ball bearing fell out of the spool serving a retractable USB cable which in turns serves my MobileMouse. Because of this video, I was able to put the ball bearing back in its correct position. Many thanks.
i want to make more bigger like roof retraction system. Do you think it is possible when I use more bigger spring and works for the mechanism for dual spool?
Thank you very much-I have a headlamp with this type of retractable cable and it fell apart-this is the only source I found to show how I might fix it. My only criticism is that you have large hands and they are in the way of getting a good view of exactly how the spring should be situated. I would have appreciated some views of the spring from different angles without your hands in the way. But overall, very helpful. Thank you.
Thanks! I was able to fix a mouse thanks to you, this mecanism is so satisfying when it works well, couldn't let it go to the trash without trying to fix it first.
Is there a way to do this with a cable with a larger width? I tried the hack with the dollar store reel but then tried to use a cable that was the standard diameter not the smaller one you find in the dollar tree reels and it does not work no matter how much I fiddled with it.
i’m trying to design something similar for my powerbank. my main cable isn’t that long, but i keep my powerbank in an inside pocket, so when i’m using my phone while it’s charging, the cable can get very long and annoying to deal with. if i could use something like this to clip onto the powerbank (only unwinds in one direction like a measuring tape), it could be very handy
any ideas for making a 1 way version of these, in order to attach it to a desk? I (and many others) cant find anything other than large and expensive industrial versions.
Saying it is frustrating was an understatement lol but thank you so much for this video, I was able to fix my charger rather quickly with those explanations
Is it possible to place the 'hub' towards either end of the cable? Let's say I don't want it directly in the middle because I only want one end to extend and retract. Thanks!
A tip for getting the spring wound and re-installed: I was able to do this on my 5th try (about 20 minutes total) with this method: -- Build a simple spring winding jig -- I used a scrap of wood and two brad nails (also pliers, a flathead screwdriver and something to cut the heads off the nails). Put the nails into the wood so that the inner "s-curve" hooks onto both. Once the position is correct, cut off the heads of the nails at a height maybe twice the width of the spring. Place the spring flat against the wood, hooking onto the nails with the inner "s-curve" and holding the tail end with fingers, turn the piece of wood, which will wind the spring. This allows for a pretty tight wind. To remove, pinch the spring with some small pliers about 2/3 the way down the width of the spring (you want to leave some space on the bottom so you can put the spring back in the housing without the pliers getting in the way) and slide a flathead screwdriver under the spring to start to pry the spring up off the wood on both sides. Once you have some separation between the spring and the jig, but it is still on the nails, put the flathead screwdriver all the way underneath so that when you lift, the coil stays in the same plane. With the heads of the nails removed you can now lift with the screwdriver and it should slide right off the jig, still gripped by the pliers. You should now be able to partially insert the spring back in the housing, where the housing should keep the spring wound. You can now let go with the pliers, push the spring fully into the housing, and take a deep breath, the hard part is over. You still need to hook the outside anchor, but this was pretty easy and got this on my 2nd try. Full disclosure. My cable ended up being too thick and would stick in the openings so I wasn't able to fully get this solution working, but I did get it re-assembled successfully at least.
genius! been looking for product that can retract my long ass cables for so long, couldnt find one, now i can just get one of those cheap retractable cable and replace mine into it
Very hard to describe in words, but try and see the orientation in the video. Pause it and see if you can make it out, otherwise you may have to do more googling! Always take a picture of things before you take them apart.
I'm not good at explaining specially in English but first I put the second arm (out of center) in it's position then you roll them in till you reach the center. This way is much easier to go first on center then out of that. I also damaged my finger with that too .. Be careful
created a platform for a minifridge in my minivan that sits between the front seats and slides to the back seats.... this is the info I needed to make a 12v retractable cable for it when it slides back :D Thanks!
I was trying to repair one and of course the spring popped out and went everywhere. Also the tiny ball bearing took flight and was never seen again. Spent WAY too much time trying to roll the spring back up into the plastic cap before I noticed the ball bearing was gone. Trash can. :(
Quick question: if I move the “hub” all the way to the USB side of the cable, would it work if I want only the “lightning” side of the cable to unwind? I want to do a retractable mounted cable in my car. I hate the phone cable laying around in the car and I want to hide the reel mechanism behind a panel. So I just have to pull on the lightning cable to hook my phone and when I’m done wined it back out of sight. Hope I’m making sense. Thanks.
Im in a big pickle with my convertible car it has basically this mechanism for the trunk cables and i couldn’t figure out how to run my own cable since it needs to reel and unreel ,thanks
Is there something to be done to ensure there is always tension? Would be useful to tidy up some cable mess I have. This way, there's only ever "just enough" at any point, and I never have to trigger it to re-reel.
Thanks for the video. Here's 3 TIPS that I hope will help: 1) When trying to find the middle point, simply take the cable end and bend it in half to where your USB male end is touching the other end (a cpu mouse in my case). Then you'll know your half way point 2) For the challenging task of winding the spring. First, I found it to be a bit annoying since the two flapping cable ends are in your way as well as having to hold it in place ,etc. So what I did was create some slack with the cable ends and then wrap them around my finger so I didn't have to worry about it. This actaully helped me wind it faster/better! And just for clarification, this was during the step that was just before putting the ball bearing in place + tightening the screw. 3) When operating your cable retracting tool, remember not to hold the ends and do the pulling (This can/will cause damage to your wire, and in my previous cases had broke through the cheap soldering job). Instead, place your fingers a few inches into the wire (NOT THE ENDS!) and this will avoid effecting any end point connections.
hi there man. good demo.i am currency designing something that require this mechanisme. i have a question, how do i add tension to the spring? i think the current spring is too soft, i need a higher tension that makes it harder to pull
The idea is to show people how to take apart the mechanism and repurpose it for use with another cable, or set of headphones, etc that you cannot find with a retractable mechanism.
Great video. Thank you! If I wanted to make my own retractable cable system, what type of metal should I use for a cable that is 1/8 inch circumference? Do certain size ball bearings go with the metal and cables? Thanks
Hello, thank you for the video. While watching it, I was wondering what that ball was for! Would that ball do anything on that? and what happens when you lose the ball...?
The ball is what locks it in place to stop retraction, without it it'll be like a measuring tape that'll always tug on the cable while you use it. Every time you hear/feel the click it's sliding in the outer little notch and basically locking it from retracting, when you tug on it a bit it'll slide out of there and fall back into the main track which allows it to retract again. The ball isn't necessary if you don't care about the locking part but it'll be annoying using the cable while it feels like someone is constantly tugging on it... That'll also cause unnecessary stress on the wire and cause it to fray and eventually break really fast. I'm late to the party but I figured I'd respond anyway incase someone has the same question as you and I did...
wow thanks. my charger like this stopped working so i took a screwdriver and took it apart, but didn't know how it was supposed to go back together. great video!
Thank you so much. If I didn't watch this video, I wouldn't had known there was a ball bearing. Luckily I found it while searching my carpet. Edit: It exploded and now I can't find the ball bearing anymore.
This is exactly what i need for organizing my desktop cables. How can there not be a product and we have to do it ourselves by hacking a different thing
Just make sure the cable you're trying to replace is a similar size - Oops! lol - The cable I was trying to replace is much smaller than my mouse cable.
one could make a 3d printable version by reverse engineering the files of this project th-cam.com/video/03iUbhrU8xw/w-d-xo.html as for the locking mechanism consisting of the ball bearing I do not know much about it's function so i was thinking of a bistable compliant latch, however at it's simplest it can be a screw which slightly tightens the enclosure.
@@pirateg3ckoy'all are slow, I only stumbled upon this because I'm making industrial fashion accessories and need to make my own retractable cord thing from a pulley and Paracord I bought at home depot, he prolly was doing something similar
@@Valansch yes you did but it's a lousy bottle opener. this is a good retractable headphone cable. there's another video like this that says to cut the wires and splice them together. at least this video you get to keep both wires. I say this is a good video
Here are some already made versatile retractable USB cables. As an Amazon Associate I earn from qualifying purchases (at no extra cost to you):
Retractable 3 in 1 Multi -USB Cable:
amzn.to/3BCujpM
Retractable 4 in 1 Multi-USB Cable:
amzn.to/3Q5hxEh
this deserves more views
Thank you Alexander, that is very kind of you! Be sure to subscribe to catch more of my videos like this :)
@@EmbraceMaking I hope to see more of your content :)
I was trying to do the same thing for my headset but I wasn't able to figure out what should be the arrangement of the spring. Thank you dude. Great video.
Glad it helped, thanks for watching!
You saved me a few bucks but it was worth knowing how this thing works. Couldn't believe there was a ball bearing that small inside. Almost lost it when I opened the unit up. I don't understand the mechanics fully, but just know that the ball bearing rolls along the track and jams up at certain points. Quite ingenious really.
Thanks! It is a clever little mechanism for sure!
Was trying to fix my computer mouse that has this same retractable reel mechanism and this was the only helpful video I found because it shows the inside & how it works - thanks a bunch!
Got some sore fingers now haha
Glad it helped! Little parts make it tough for sure!
My retractable charger's cover accidentally popped and it didn't retract when I try to fix it and I thought I damaged it but gladly it didn't. I came across your video, and it worked! I'm glad I didn't lost any parts. My charger is now fixed. Thank you so much for the great help!
did not skip the ad for the first time, did not completely made what i liked but i managed to make my earphones wire more than half folded! cheers!!
Glad it worked out for you!
The tiny ball bearing fell out of the spool serving a retractable USB cable which in turns serves my MobileMouse. Because of this video, I was able to put the ball bearing back in its correct position. Many thanks.
I'd prefer if it showed how to make one from scratch, given the particular cable dimensions, but this is also a bit helpful.
i want to make more bigger like roof retraction system. Do you think it is possible when I use more bigger spring and works for the mechanism for dual spool?
is it possible to do a version where only one side(of the cable) rolls in/out
Could it be done with a tape measure, I wonder?
Lock one side...
Zip tie
Velcro strap
The iron. Brilliant! I have a 3d printer so can take the mechanism out and make a snazzy looking assembly for it. Shop light here i come!
Awesome idea!
Thank you very much-I have a headlamp with this type of retractable cable and it fell apart-this is the only source I found to show how I might fix it. My only criticism is that you have large hands and they are in the way of getting a good view of exactly how the spring should be situated. I would have appreciated some views of the spring from different angles without your hands in the way. But overall, very helpful. Thank you.
Thanks Cheryl! Hopefully you could see enough to get yours fixed... next time I'll mind my large hands :)
Thanks! I was able to fix a mouse thanks to you, this mecanism is so satisfying when it works well, couldn't let it go to the trash without trying to fix it first.
thx man u really helped me its surprising how this isnt anywhere else
Glad it helped!
Thank you for showing how that works! Now I need to build a bigger version for coax cables.
6:41... If your cable is a lot longer than the original one, the problem is not the spring but insufficient space for the new cable inside the reel.
Springs is difficult to put in what tools do you use
Is there a way to do this with a cable with a larger width? I tried the hack with the dollar store reel but then tried to use a cable that was the standard diameter not the smaller one you find in the dollar tree reels and it does not work no matter how much I fiddled with it.
Hello, what is the plastic things called. In the video you call them hubs, but I'm trying to order them and nothing comes up???
i’m trying to design something similar for my powerbank. my main cable isn’t that long, but i keep my powerbank in an inside pocket, so when i’m using my phone while it’s charging, the cable can get very long and annoying to deal with.
if i could use something like this to clip onto the powerbank (only unwinds in one direction like a measuring tape), it could be very handy
any ideas for making a 1 way version of these, in order to attach it to a desk? I (and many others) cant find anything other than large and expensive industrial versions.
Thanks for the presentation. Are there retractable units that one can get to manage electric cables
Saying it is frustrating was an understatement lol but thank you so much for this video, I was able to fix my charger rather quickly with those explanations
Glad it helped!
The only video I could find to help me fix my retractable aux cord. Thank you so much!!
Glad it helped!
Pls can u suggest an easy way to fix the spring.
It accidentally popped out and now I am not able to put it back😅
i dont ever leave comments but this was very informative, thank you
Glad it was helpful!
Any solutions like this for electrical cords, like for a vacuum?
Is it possible to place the 'hub' towards either end of the cable? Let's say I don't want it directly in the middle because I only want one end to extend and retract. Thanks!
I don't think that will work as the mechanism retracts equally from both sides... but you can give it a try!
A tip for getting the spring wound and re-installed:
I was able to do this on my 5th try (about 20 minutes total) with this method:
-- Build a simple spring winding jig --
I used a scrap of wood and two brad nails (also pliers, a flathead screwdriver and something to cut the heads off the nails). Put the nails into the wood so that the inner "s-curve" hooks onto both. Once the position is correct, cut off the heads of the nails at a height maybe twice the width of the spring. Place the spring flat against the wood, hooking onto the nails with the inner "s-curve" and holding the tail end with fingers, turn the piece of wood, which will wind the spring. This allows for a pretty tight wind.
To remove, pinch the spring with some small pliers about 2/3 the way down the width of the spring (you want to leave some space on the bottom so you can put the spring back in the housing without the pliers getting in the way) and slide a flathead screwdriver under the spring to start to pry the spring up off the wood on both sides. Once you have some separation between the spring and the jig, but it is still on the nails, put the flathead screwdriver all the way underneath so that when you lift, the coil stays in the same plane. With the heads of the nails removed you can now lift with the screwdriver and it should slide right off the jig, still gripped by the pliers. You should now be able to partially insert the spring back in the housing, where the housing should keep the spring wound. You can now let go with the pliers, push the spring fully into the housing, and take a deep breath, the hard part is over. You still need to hook the outside anchor, but this was pretty easy and got this on my 2nd try.
Full disclosure. My cable ended up being too thick and would stick in the openings so I wasn't able to fully get this solution working, but I did get it re-assembled successfully at least.
i have one and it broke and i was super bummed, so your video is really helpful!! thank you!! :D
mine is glued shut so i'm currently prying it open, so annoying lol. and a bit scary with my exacto lol
genius! been looking for product that can retract my long ass cables for so long, couldnt find one, now i can just get one of those cheap retractable cable and replace mine into it
Thanks! Just keep in mind it might not work with super long cables... Depends on how long the cables are that comes with the mechanism
How does this affect the cable? Does it damage the wires being wound so tightly?
I haven't had any problems... I would imagine those tiny wires have a tiny allowable bending radius.
3:46 can you please tell how to fix that spring on the centre
Very hard to describe in words, but try and see the orientation in the video. Pause it and see if you can make it out, otherwise you may have to do more googling! Always take a picture of things before you take them apart.
I'm not good at explaining specially in English but first I put the second arm (out of center) in it's position then you roll them in till you reach the center. This way is much easier to go first on center then out of that. I also damaged my finger with that too .. Be careful
Awesome video!!! Does anyone know the size of that mini ball bearing?
This, you. Thank you i have been looking for this for a very long time
Glad I could help
does the cable have to be in the middle? what I want only 1 side to be retractable
For this type of mechanism it has to go in the middle
created a platform for a minifridge in my minivan that sits between the front seats and slides to the back seats.... this is the info I needed to make a 12v retractable cable for it when it slides back :D Thanks!
Cool idea!
Hi thanks for the video. Can you please make a video on retractable reels from scratch for larger cables such as 10 metre cables. Thank you so much.
Is it possible to make only 1 side retractable?
Not on this model, both sides have to retract
I was trying to repair one and of course the spring popped out and went everywhere. Also the tiny ball bearing took flight and was never seen again. Spent WAY too much time trying to roll the spring back up into the plastic cap before I noticed the ball bearing was gone. Trash can. :(
Good thing they are only a few dollars ;)
I spent two years trying to put the spring back in. No success yet.
Quick question: if I move the “hub” all the way to the USB side of the cable, would it work if I want only the “lightning” side of the cable to unwind? I want to do a retractable mounted cable in my car. I hate the phone cable laying around in the car and I want to hide the reel mechanism behind a panel. So I just have to pull on the lightning cable to hook my phone and when I’m done wined it back out of sight. Hope I’m making sense. Thanks.
Pretty sure this needs to be right in the middle and can't be biased to one side unfortunately.
Im in a big pickle with my convertible car it has basically this mechanism for the trunk cables and i couldn’t figure out how to run my own cable since it needs to reel and unreel ,thanks
Thanks for your diy because it help us in our group project :))
You are welcome 😊
thanks for your video .. .. it saved my life .. je! .. I damaged my dad's mouse and your video helped me fix it 👍😎
Glad I could help!
Is there something to be done to ensure there is always tension? Would be useful to tidy up some cable mess I have. This way, there's only ever "just enough" at any point, and I never have to trigger it to re-reel.
Do you have any suggestions for biger cables like HDMI of 15ft?
Someone else in the comments suggested trying to take apart an old tape measure... might have some luck there!
I’d like something like this for my vacuum cord. Any ideas?
Does the mechanism have to be in the middle or I can place it near the end of the cable?
Not sure which mechanism you are referring to?
I know this is a bit older of a video but do you know if trimming the spring will speed up the recoil time?
Not sure.... only one way to find out ;)
very helpful, thank you! been looking for a tutorial on this
Thanks! glad you enjoyed!
my earphone are not locking when i stretch it... what to do now??
did you try pulling quickly?
Thanks for the video. Here's 3 TIPS that I hope will help:
1) When trying to find the middle point, simply take the cable end and bend it in half to where your USB male end is touching the other end (a cpu mouse in my case). Then you'll know your half way point
2) For the challenging task of winding the spring. First, I found it to be a bit annoying since the two flapping cable ends are in your way as well as having to hold it in place ,etc. So what I did was create some slack with the cable ends and then wrap them around my finger so I didn't have to worry about it. This actaully helped me wind it faster/better! And just for clarification, this was during the step that was just before putting the ball bearing in place + tightening the screw.
3) When operating your cable retracting tool, remember not to hold the ends and do the pulling (This can/will cause damage to your wire, and in my previous cases had broke through the cheap soldering job). Instead, place your fingers a few inches into the wire (NOT THE ENDS!) and this will avoid effecting any end point connections.
Great suggestions, thanks for those!
Is it possible to make it not lock in place?
Where do you put the ball bearing? In the middle or in any of the grooves?
hi there man. good demo.i am currency designing something that require this mechanisme. i have a question, how do i add tension to the spring? i think the current spring is too soft, i need a higher tension that makes it harder to pull
How To Make Retractable Cables: Buy one and use it for what you what to use it for.. Great guide :P
The idea is to show people how to take apart the mechanism and repurpose it for use with another cable, or set of headphones, etc that you cannot find with a retractable mechanism.
Thanks a lot but I don't know why wires don't shift back in their position? Am I missing something?
Did you lose the little ball bearing and ensure everything is in the correct orientation?
Muchísimas gracias!!!!!! Fabuloso!!!!!!! en serio que me sirvió el vídeo😃
Great video. Thank you! If I wanted to make my own retractable cable system, what type of metal should I use for a cable that is 1/8 inch circumference? Do certain size ball bearings go with the metal and cables? Thanks
Hi Nick, I'm not sure I understand your question. The ball bearing comes with the cable you take apart to insert your own cable.
how many ball bearing does it have? i lost one and found it on my floor.
I believe it only has one that can actually fall out...
Thank you very much for this! I will definitely be applying it to an idea I have. Hopefully it will work well.
Best of luck!
I finally found a helpful video about this
Glad you liked it!
Thank you, you are great !!!
Happy to help!
Hey what if the string comes out
Excellent instruction,
Thank you!
Thanks for the kind words!
Hello, thank you for the video. While watching it, I was wondering what that ball was for! Would that ball do anything on that? and what happens when you lose the ball...?
The ball is what locks it in place to stop retraction, without it it'll be like a measuring tape that'll always tug on the cable while you use it. Every time you hear/feel the click it's sliding in the outer little notch and basically locking it from retracting, when you tug on it a bit it'll slide out of there and fall back into the main track which allows it to retract again. The ball isn't necessary if you don't care about the locking part but it'll be annoying using the cable while it feels like someone is constantly tugging on it... That'll also cause unnecessary stress on the wire and cause it to fray and eventually break really fast.
I'm late to the party but I figured I'd respond anyway incase someone has the same question as you and I did...
Ive been trying to do this a lot of times but the cable only raps around 3times and i cant see my problem
Uh.... can some body help meeee???
wow thanks. my charger like this stopped working so i took a screwdriver and took it apart, but didn't know how it was supposed to go back together. great video!
Glad I could help! Thanks for watching
Which dollar store sells these????
I'm in Canada and usually shop at Dollarama...
Where can I buy just this mechanism
Might want to try Alibaba or Aliexpress or Ebay
i was looking for the third hand part
i want one that is ready to use
Excellent!
Thank you for watching!
Thank you so much. If I didn't watch this video, I wouldn't had known there was a ball bearing. Luckily I found it while searching my carpet.
Edit: It exploded and now I can't find the ball bearing anymore.
lol it's so tiny it is tough not to lose!
Muchas gracias, pude reparar mi parlante ya que el cable estaba suelto y no sabia como repararlo.
I lose the tiny ball bearing 😢
This is exactly what i need for organizing my desktop cables. How can there not be a product and we have to do it ourselves by hacking a different thing
I'm going to say this simply...
+1 Sub for the best video on youtube!
Thanks Natedog! Very kind of you!
Embrace Racing Thanks :)
Is there a patent on this design?
Check google patent search
Just make sure the cable you're trying to replace is a similar size - Oops! lol - The cable I was trying to replace is much smaller than my mouse cable.
one could make a 3d printable version by reverse engineering the files of this project th-cam.com/video/03iUbhrU8xw/w-d-xo.html
as for the locking mechanism consisting of the ball bearing I do not know much about it's function so i was thinking of a bistable compliant latch, however at it's simplest it can be a screw which slightly tightens the enclosure.
Mine doesnt click.. dont know what went wrong
Maybe you lost your ball bearing?
Wish there were over for big laptop cables
Ur not making retractable cables... Ur just buying the retractable part yourself then adding a cable to it... Kinda misleading.
Could you show me what a retractable cable would look like? I'm curious.
Dude. Are you trolling ?
Do you think people who built their own computers manufactured all the CPUs and GPUs themselves?
Yeah uh.... don't make your own power cables dude.
@@pirateg3ckoy'all are slow, I only stumbled upon this because I'm making industrial fashion accessories and need to make my own retractable cord thing from a pulley and Paracord I bought at home depot, he prolly was doing something similar
When he said the most frustrating part was the spring
Well I got multiple cuts because of that haha
It is a pain!
Darn didn’t know about the ball bearing and I lost it :(
:( might have to get another donor cable
I used this mechanism to make a retractable whip sword for my cosplay!
hey I am also working on this mechanism. It will be of great help if you could share the mechanism. I am still figuring it out. Please do connect.
How is this DIY?
... because you take something apart and re-purpose it and you "do it yourself"
@@EmbraceMaking You are literally using a cable retractor to... retract a cable. If i use a hammer to open a bottle, did i just DIY a bottle opener?
@@Valansch yes you did but it's a lousy bottle opener. this is a good retractable headphone cable. there's another video like this that says to cut the wires and splice them together. at least this video you get to keep both wires. I say this is a good video
@@Valansch What do you think "DIY" is? How do you define it?
Darnn i lost the ball bearing
Your not human if you put the spring in first try
Agreed.
i lost the little ball :(((
:( might have to get another one
@@EmbraceMaking i found it on the floor!! haha but i couldn't fix my mouse
i wonder why nobody made a 3d model for this
its funny you say do not lose the small ball (i lost it)
:(
Hey man, you may want to watch your audio levels, that outro was so loud I instantly skipped and ended your video.
Fixed it in my latest videos, I know it was a bit of an issue previously
@@EmbraceMaking
You know, I probably should have checked, awesome though!
Se malogra rapido, no sirve
no se retrae
Thumb up for a guy who call things "guy"
Just like me.
This guy right here! Thanks!
I lost my ball bearing 😭😭
ES INSULSO TU TUTORIAL, LO ARME YO SOLO