This truck sat abandoned in the woods on a farm for over 5 years (thought it was 3 years). Will It Run? Let's find Out. 😁 Tools: Engine Lift: amzn.to/3KRQts1 Impact Wrench: amzn.to/3EciVRz Wrenches: amzn.to/3KRqpNU Engine Hoist Leveler: amzn.to/3qCVv4V Compression Tester: amzn.to/44mpnQN As an Amazon Associate I earn from qualifying purchases.
The seats looked like the North Face Edition...maybe not, I didn't see the side emblems plus the instrument cluster has it on and the lighter dial color. It's the correct exterior color...rare truck that's worth holding on to! And all the work you have done. Good Luck Pal!
i hope this is helpful but when soldering a wire like that put the heat source below both wires and hold the solder on top when the solder melts it will go through the wires and not just sit on the outside, thanks for the video!
I just did a motor swap on my 2001 sierra 2500hd truck will turn on and shut off with amf connected Disconnected and runs good at least won’t shut off, got new amf, same thing! Trows code p0102
@MattsShop oh, I'm not sure. Other than I believe the Avalanche to be one of GM's worst ideas. I mean, if you're going to buy an Avalanche, why not just buy a real truck.
![[ENGSUB] UNPRODUCTIVE DAY ใช้ชีวิต (เปื่อยๆ) ด้วยกัน 1 วัน! | OUROAD CLOSEFRiEND SS2 EP.9](http://i.ytimg.com/vi/pyYKZ3kra9w/mqdefault.jpg)
This truck sat abandoned in the woods on a farm for over 5 years (thought it was 3 years). Will It Run? Let's find Out. 😁
Tools:
Engine Lift: amzn.to/3KRQts1
Impact Wrench: amzn.to/3EciVRz
Wrenches: amzn.to/3KRqpNU
Engine Hoist Leveler: amzn.to/3qCVv4V
Compression Tester: amzn.to/44mpnQN
As an Amazon Associate I earn from qualifying purchases.
I have always like avalanches they’re nice trucks good job fixing it up
Yea they are! Thanks
They do ride nice,,,I seen a 3500 with the 0 gas mileage big block an rear axle on those are still solid! No independent like the 1500,,,,
Bros a beast
That’s what I would do. EXCELLENT!!! John from Cape Cod
Thanks! Hey John.
Pro tip let all the air out of the front tires and you don’t have to Jack it up as high 😂
Done it,,, do it whenever I have to open the hood on my 4x4 ,,,,definitely a great help.
Cool vid, that was a loooooot of work
Yup, it was a ton and I didn't even film half of it!
Informative as always! Smart guy..
Glad you think so!
Glad you were able to save her😁👍🏼
Same here 👍👍
Nice job brother
Thanks!
I'm glad it was saveable, you do great work
I am too. Thank you!
U do good practical work. Keep up the vids....
Your tictoks got me to u
Thanks! I try my best to do practical repairs. I'm glad you found me!
Congrats!!! 🎉
Thanks!!
That was cool you made it look so easy.
Thanks! It was a lot of work!
Great work. Just discovered your channel. You’ve got a new sub! 😊
Awesome, thank you!
Excellent work Matt
Thanks for chevy videos! I have 2004 chevy suburban Lt. This help for reference.
It looks like you have a rare North Face Edition! Very Cool!
Wait this is a rare Northface edition? I didn't even know. How can you tell?
The seats looked like the North Face Edition...maybe not, I didn't see the side emblems plus the instrument cluster has it on and the lighter dial color. It's the correct exterior color...rare truck that's worth holding on to! And all the work you have done. Good Luck Pal!
Great work, I'm a DIY also. Saving money and know it's done right is Lit. God Bless...
Yes! Thanks. I always like getting the job done right!
What!!!!!
U could have used your homebrew moonshine to feed this beast on the e85 set up 😊
Luv your vids
There's no way with the motor like this haha. Thanks man I appreciate it.
Thanks Matt for the video
You bet!
Awesome video! How many working hours do you think you had into abandoned to drivable?
It's hard to say, but I worked on it everyday for like 1.5 months.
Good job man!!!!
Thanks, I appreciate it!
You da man matt ! Nice work !
i hope this is helpful but when soldering a wire like that put the heat source below both wires and hold the solder on top when the solder melts it will go through the wires and not just sit on the outside, thanks for the video!
Customer: it leaks when adding oil
Matt: oil is overfilled
Me: @_@
Hahaha they overfilled it because the engine was blown and making noise.
@MattsShop probably used a thicker oil, too 🫣
Nice work bro! Just subscribed, keep up the good work 👍
Thanks! Will do!
how long did it take to do all of that? Nice work bud! great video!
Like a month. Finding the engine was the hardest part because I had to search for one. It took time.
Stumbled on your channel. 😎 cool video. Bro. I just subscribed to your channel
Awesome thank you!
From beginning to end about how long did that project take?
About 1.5-2 months, but I got lucky and found a used motor pretty fast. Then a couple months to work out all the hidden issues.
You are very clever and funny 👍
Thank you! 😃
Will the oil pressure sensor leak I looked back there seems wet and dirty from oil
Yes, it can sometimes.
Nice!
Thanks!
Cluster is normal for going out. Mine has 332000 miles and runs strong.
Mice chewed the wires under the fuse box.
Scanner used ?
Are you the dude who had the bmw serviced and the mechanic took your bmw of a joyride doing 115?
Nah, that's not me I don't have a BMW. Looks like I have a look-a-like, lol.
Course itll run, just refill 😏
Haha I wish
It's a chevy. It will run on bad gas 500,000 miles and a dead Cylinder.
Bow tie till I die
Were did you find a 5 3 motor from
Facebook Marketplace! Not easy to find low miles now a days.
I want a Transmission for mine
Later ... lol
Laterrr
Then the transmission takes a poop 💩 😂
I just did a motor swap on my 2001 sierra 2500hd truck will turn on and shut off with amf connected
Disconnected and runs good at least won’t shut off, got new amf, same thing! Trows code p0102
Hey, if you ever owned a Chevy Avalanche, you would understand why it was abandoned😅.
Haha why is that? Too much plastic?
@MattsShop oh, I'm not sure. Other than I believe the Avalanche to be one of GM's worst ideas. I mean, if you're going to buy an Avalanche, why not just buy a real truck.
How much did you need up spending on it?