Gunpla for Beginners (Top Coat)

แชร์
ฝัง
  • เผยแพร่เมื่อ 20 ก.ย. 2024
  • This is the last video in this series and we will be top coating our snap build. I will de demonstrating how to top coat your kit using Tamiya flat coat in a rattle can and showing the difference it makes in a direct comparission. For updates on future videos and wip projects follow me on twitter. Link bellow.
    Twitter: / kyletoon1

ความคิดเห็น • 260

  • @xpluscollectorscrew
    @xpluscollectorscrew 3 ปีที่แล้ว +194

    Relaxing, informative, not boring, no annoying music, clear voice, humble, articulate...subscribed😁

    • @whiskeredgundam7765
      @whiskeredgundam7765  3 ปีที่แล้ว +12

      Thanks man. I greatly appreciate that and I'm glad you like the content.

    • @donquimby4128
      @donquimby4128 3 ปีที่แล้ว

      Ditto :)

    • @keihobbies
      @keihobbies 2 ปีที่แล้ว +1

      Same vibe i got! very awesome and simple

    • @JGratsch
      @JGratsch 2 ปีที่แล้ว

      I agree. Very well done, and thanks for taking the time to do it!

  • @TWShadow
    @TWShadow 3 ปีที่แล้ว +52

    Dude you're the Bob Ross of NA Gunpla

  • @wellyep790
    @wellyep790 2 ปีที่แล้ว +27

    a little tip for those who have trouble keeping a steady movement and end up with puddles: start spraying off of the model/model piece and stop spraying once you're off the other side. It's not necessary to do this persay but that's how my dad taught me to get in the groove of painting layers. Great video!

  • @OceanpacifiqueAurore
    @OceanpacifiqueAurore 3 ปีที่แล้ว +31

    Thank you for posting this video. I really appreciate the way you explain things and emphasize on having fun building gunpla.
    As a gunpla beginner, I sometimes get a little scared by some tutorials made by "expert" builders.
    Looking forward to buy a can of Tamiya ts80 and top coat my kits!

    • @whiskeredgundam7765
      @whiskeredgundam7765  3 ปีที่แล้ว

      Welcome to the hobby. I'm glad the tutorials were helpful, and I'm no expert. I'm stilling learning as I go, and want people to learn with me.

  • @kittenclanclan
    @kittenclanclan 3 ปีที่แล้ว +17

    What a delightful video! I've only just gotten into Gunpla and have bounced around dozens of people before finding someone as humble and pleasant as yourself. Your enthusiasm feels so much more tempered than others' - calm, demure, earnest - you can really feel how much you enjoy the hobby. Thanks for sharing this with us! I'd been very curious about top coats and this taught me a lot.

    • @whiskeredgundam7765
      @whiskeredgundam7765  3 ปีที่แล้ว

      I'm glad you enjoy the content and that the video was helpful. If you ever have any questions feel free to hit me up here or on my Twitter.

  • @xxnike0629xx
    @xxnike0629xx 3 ปีที่แล้ว +8

    Good tips.
    I do agree that it's best to use an a can of air duster on the kit, then segment the kit into parts.
    I agree it's important to do quick short bursts and to make sure not to spray in 1 area constantly. Less is more in this situation.
    I've been enjoying these quick tutorial series. I'm sure it'll help a lot of beginners and help them realize you don't need to spend a whole lot to get good results.

    • @whiskeredgundam7765
      @whiskeredgundam7765  3 ปีที่แล้ว +1

      I'm glad you have enjoyed them. It's been fun for me as well getting to do a simple build. And that's what I was aiming for, to show people you don't have to have or spend a lot to enjoy and have a nice looking kit.

    • @rx-105xigundam2
      @rx-105xigundam2 11 หลายเดือนก่อน

      @xxnike0629xx it is just sad that these useful tutorials ...

    • @rx-105xigundam2
      @rx-105xigundam2 11 หลายเดือนก่อน

      @xxnike0629xx are actually useless to you ...

    • @rx-105xigundam2
      @rx-105xigundam2 11 หลายเดือนก่อน

      @xxnike0629xx after all, you are still too ...

    • @rx-105xigundam2
      @rx-105xigundam2 11 หลายเดือนก่อน

      @xxnike0629xx too
      Charlie
      Oscar
      Whiskey
      Alpha
      Romeo
      Delta
      Lima
      Yankee
      to actually build a kit again

  • @YuriusFarrence
    @YuriusFarrence 3 ปีที่แล้ว +8

    wow this vid is relaxing just like Bob Ross painting. Nice ambient music and in good combination with your voice.

    • @whiskeredgundam7765
      @whiskeredgundam7765  3 ปีที่แล้ว +1

      Thanks, I'm glad you enjoyed the video. I loved watching Bob Ross growing up.

  • @ivegyattocomment
    @ivegyattocomment 6 หลายเดือนก่อน +5

    i was like so what does it do really.. and then i see it gets rid of that plastic toy look shine and giving it that pro matte look... instant buy.

  • @koolkat123
    @koolkat123 ปีที่แล้ว +1

    this is exactly what I was wondering, thanks for this! I don't have the time to paint everything but doing simple stuff like this to make it look 10x better is worth the time and effort in my opinion.

  • @mattr.1804
    @mattr.1804 ปีที่แล้ว +7

    It seems to easy yet I’m still so scared lmao

  • @l4l01234
    @l4l01234 2 ปีที่แล้ว +2

    The top coat really does work wonders for improving the look

  • @oberon1248
    @oberon1248 13 วันที่ผ่านมา

    Straight to the point video.

  • @demus89
    @demus89 ปีที่แล้ว +1

    Really amazing what the top coat does. Ive never done this before i cant wait to give it a shot.

  • @shadplus253
    @shadplus253 ปีที่แล้ว

    so thats how to get rid of the plasticy look thank you so much! im just starting to get into painting gunpla and this is a huge help

  • @nullw8768
    @nullw8768 2 ปีที่แล้ว +1

    I really appreciate these vids. This is a hobby I'm rediscovering. I have some unused boxes sitting here from when I was a kid. A Tallgeese, a YMS Gyan. Ready to take a crack at them now!

  • @teamjayrol
    @teamjayrol 3 ปีที่แล้ว +4

    Thanks for the tutorial on this, first time doing top coat on my Gunpla, as a begginer on gunpla building your videos really help. Thank you

  • @berserksamurai
    @berserksamurai ปีที่แล้ว +2

    this is something not every gunpla person tells you, but it's possibly the next thing you should do to improve the look of your gunpla after a good panel lining.

  • @nathang7463
    @nathang7463 2 ปีที่แล้ว

    This is so great. You sound like the Bob Ross of Gunpla.

  • @ryanleclaire7006
    @ryanleclaire7006 2 ปีที่แล้ว +1

    Crazy I literally just had the thought today if I should top coat or not, good stuff

  • @DarkMetroid777
    @DarkMetroid777 ปีที่แล้ว

    Very informative video. Very humble too. Been building a few gunpla kits this past year and at a point I want to dive into matte spraying a few of them. This is inspiring me to dive in that finally.

  • @nathangangi7571
    @nathangangi7571 3 ปีที่แล้ว +4

    Really appreciate this video!

  • @terrencewhite7367
    @terrencewhite7367 3 ปีที่แล้ว +2

    Bro, this is the first video I have seen of yours and I am instantly subbed. Keep up the great work. Which kit is that Gouf man? The thing is beautiful.

    • @whiskeredgundam7765
      @whiskeredgundam7765  3 ปีที่แล้ว

      Thanks, I'm glad you like the content, and the goufe is from the origin line. It's a great kit and I highly recommend it.

  • @justinesteban5770
    @justinesteban5770 3 ปีที่แล้ว

    soothing voice, calming music, you earned a sub dude! Keep it up!

  • @platonicbuu7454
    @platonicbuu7454 3 ปีที่แล้ว

    Thank you so much. Your side by side convinced me that i reallllly need to matte finish

    • @whiskeredgundam7765
      @whiskeredgundam7765  3 ปีที่แล้ว +1

      No problem man. I'm glad the video was of help to you. Happy building.

  • @Flip5ide
    @Flip5ide 3 ปีที่แล้ว +1

    Thanks for this, I did a matte top coat for the first time as your video gave me the confidence to do it 👍🏻😎

    • @whiskeredgundam7765
      @whiskeredgundam7765  3 ปีที่แล้ว +1

      Awesome man. I'm glad it was some help to you.

    • @Flip5ide
      @Flip5ide 3 ปีที่แล้ว

      @@whiskeredgundam7765 it really was, I subscribed as well, really enjoy your videos, thanks.

    • @Flip5ide
      @Flip5ide 3 ปีที่แล้ว

      @@whiskeredgundam7765 I had an issue with some of the panel lines running on my second kit, I'm thinking perhaps I put to much topcoat on? Or maybe the topcoat reacted with the gundam flow pen? Any ideas? I had to sand back when dry then spray again.

    • @unaruto12
      @unaruto12 3 ปีที่แล้ว +1

      @@Flip5ide Tamiya spray will react to some inks/paint so you have to let your panel lines completely dry and cure or do your first coat very lightly and let dry. Also, Mr. Hobby makes water-based topcoat that won't cause running.

  • @ASadTeddyBear
    @ASadTeddyBear ปีที่แล้ว

    Your voice sounds so kind and warm. Also, nice video.

  • @stimo4665
    @stimo4665 2 ปีที่แล้ว

    Thanks for the series, found it really helpful!
    Also very therapeutic

  • @TML82
    @TML82 2 ปีที่แล้ว

    I ordered a Zoids model on a whim that was kinda pricey. I don’t have any experience doing these kind of steps with models, but I want to do it right. I’m glad I found this channel so I can follow what you’ve done with this build. Thanks!

    • @whiskeredgundam7765
      @whiskeredgundam7765  2 ปีที่แล้ว

      I'm glad my videos are helpful. I haven't built any zoids but I really do need to.

  • @IrisCorven
    @IrisCorven ปีที่แล้ว +2

    Thanks for this. I was looking for a way to kinda tone down the plastic-y look of some older kits (I have a HG GP01 that looks horrendous because of how shallow the panel lineable areas were, but they'd look a lot better if the plastic weren't so glossy), and this was extremely informative.

  • @TheDude04
    @TheDude04 2 ปีที่แล้ว

    U fuckinh are the Bob Ross of the gunpla world man

  • @tannerastle8988
    @tannerastle8988 2 ปีที่แล้ว

    This was a fantastic video. I’m excited to watch the rest of the series.

  • @DancingCorpse
    @DancingCorpse ปีที่แล้ว +1

    This tutorial series was great! I was intimidated by water slides on a kit I will be doing soon after recently getting into Gunpla, but these videos really made that melt away and I am really excited to do the decals and a top coat on the kit!
    I see you haven't posted a video in a while, I hope you are doing well. These videos have a lot of good value!

  • @chaosvii4605
    @chaosvii4605 2 ปีที่แล้ว

    Wow what a difference, made it look easy too

  • @DrewberryHobbies
    @DrewberryHobbies 3 ปีที่แล้ว +2

    Im sure these video will help lot´s of new comers to the Hobby :)

    • @whiskeredgundam7765
      @whiskeredgundam7765  3 ปีที่แล้ว +1

      I hope so. You should see the first kit I ever did. Not that pretty. But it was fun to do this series and just do a fun simple build.

    • @DrewberryHobbies
      @DrewberryHobbies 3 ปีที่แล้ว

      @@whiskeredgundam7765 im Sure every one Frist kit Was rough around the edges i know mine was XD also never wanted to mess with a Butter knife agine after that. XD thoe that was so so so long ago and also was young and dumb then.

  • @wannabkain4400
    @wannabkain4400 2 ปีที่แล้ว

    Thanks for the video. I may have to do this going forward.

  • @magicalgirl1296
    @magicalgirl1296 ปีที่แล้ว

    Thank you for the very clear before and after.

  • @toadsage
    @toadsage 3 ปีที่แล้ว +2

    Thanks for the vid! I'm about to clear coat some parts for my MG Shining Gundam that I painted gold with gundam marker and I've been so nervous about how it's going to turn out. I'll be using Mr. Super Clear UV Cut Gloss on them, just to protect that gundam marker because it rubs off easily.

    • @whiskeredgundam7765
      @whiskeredgundam7765  3 ปีที่แล้ว +2

      That stuff works great. And don't be nervous its pretty simple really. You will do just fine.

  • @lazergator1016
    @lazergator1016 3 ปีที่แล้ว

    Thanks for the tutorial, currently I'm testing tamiya ts80 cause I've been using lately Mr Hobby Mr super clear flat uv cut

    • @whiskeredgundam7765
      @whiskeredgundam7765  3 ปีที่แล้ว +1

      The tamiya has always worked great for me. Just wish they had it for airbrush.

  • @sui_tea
    @sui_tea 3 ปีที่แล้ว +1

    Love the music! Keep posting plz! Subscribed😃

    • @whiskeredgundam7765
      @whiskeredgundam7765  3 ปีที่แล้ว

      Thank you. I try to use relaxing music for my videos, and I'll have more videos soon. I'm working on two projects right now.

  • @nathang7463
    @nathang7463 2 ปีที่แล้ว

    This is wonderfully helpful, thank you so much

  • @chkndelux
    @chkndelux ปีที่แล้ว

    Very nice work. Very informative.

  • @gunplagoon
    @gunplagoon 3 ปีที่แล้ว +3

    Great video fam 🔥

  • @valid9297
    @valid9297 ปีที่แล้ว

    I search up how to top coat gunpla and this very first video shows the exact kit I’m top coating lmao

  • @masfariid
    @masfariid 3 ปีที่แล้ว

    This video really help me a lot with my build. Keep up the good work sir! Done subscribe your channel 😁

  • @MrGhost1032
    @MrGhost1032 ปีที่แล้ว

    thanks for all your usefull video's

  • @dethmasheen8683
    @dethmasheen8683 2 ปีที่แล้ว

    I have a huge backlog of kits I need to top-coat... I messed up a couple kits, one of which was a real labor of love, with some of that Rustoleum stuff. Maybe I'll have better luck if I try that Tamiya like in the video.

  • @bee-beargaming
    @bee-beargaming 3 ปีที่แล้ว

    This video was very helpful.

  • @__414.88b_
    @__414.88b_ ปีที่แล้ว

    Coooool music & relaxin voice man

  • @Astrobui
    @Astrobui ปีที่แล้ว

    This video is perfect and really made me feel like I can do it to! If I built a kit months ago can I still top coat it? Or will it not turn out nice after sitting in dust for 8 months

  • @coreylayfield4570
    @coreylayfield4570 2 ปีที่แล้ว

    This was really helpful thank you sir

  • @yukejo
    @yukejo 3 ปีที่แล้ว +1

    Really helped, thanks!

  • @Scudhs
    @Scudhs 3 ปีที่แล้ว +2

    Thanks for the informative video! It's been a while since I've topcoated so this is a great refresher. I was wondering if you were concerned about topcoating joints by any chance? Since they could potentially stiffen or make putting parts back together more difficult. Thanks!

    • @whiskeredgundam7765
      @whiskeredgundam7765  3 ปีที่แล้ว +4

      When it comes to the joints I always build my kit then disassemble it to mod and paint. I just make note of joints that are loose and clear coat them and joints that are just fine I tape off.

    • @Scudhs
      @Scudhs 3 ปีที่แล้ว

      @@whiskeredgundam7765 Great! Thanks for the info :)

  • @Spacialvekter
    @Spacialvekter 2 ปีที่แล้ว

    You can make those alligator clips using some bamboo skewers and a pack of clips off Amazon. Very inexpensive.

  • @JSicking
    @JSicking 2 ปีที่แล้ว +2

    I've seen suggestions in some groups I'm in to Top Coat, then Panel Line and Top Coat once more. Just curious about your take on that, do you see any need? Cheers and keep up the great work!

    • @whiskeredgundam7765
      @whiskeredgundam7765  2 ปีที่แล้ว +4

      Depends on what you are using to panel line with. If you are using simple gundam panel line marks, you can do it before you top coat. If you are going to use the tamiya panel line accent yes, but use gloss first so the liquid runs through the lines properly. Then you will top coat it with flat coat. You top coat first with the tamiya first because it is enamel paint and can make some plastics brittle and Crack. The first layer of gloss coat will protect the plastic from this.

    • @JSicking
      @JSicking 2 ปีที่แล้ว

      @@whiskeredgundam7765 thanks so much!

  • @rumeysausca4168
    @rumeysausca4168 ปีที่แล้ว +1

    Apologies if it is already mentioned on the video. I am doing top coat piece by piece (did first time last night) how long do I need to wait to touch them for assembly?

  • @HoangDang-eq7mk
    @HoangDang-eq7mk 3 ปีที่แล้ว

    My question is that using a flat topcoat has a higher chance to get dust on or covered in dust for a long time. I wondered because my country , Vietnam, has a tropical climate, high humidity and not good weather. My friend recommended that first layer spray the gloss one and second spray the flat or second option is spray semi gloss .Yep, that is my thought and I can't wait to see a response from you guys. Thanks a lot.

    • @whiskeredgundam7765
      @whiskeredgundam7765  3 ปีที่แล้ว +1

      Where I live its very dry. I kind of live in the desert. If your friend builds and clear coats his kit like that in your environment, I would try it. Either way it won't hurt the kit to have multiple layers.

  • @phetrix5202
    @phetrix5202 ปีที่แล้ว

    Hey could you post a link of the mate top coat you used? Loved the video and want to experiment with top coating but there are many kinds!

  • @KouhaiKamen
    @KouhaiKamen 9 หลายเดือนก่อน +1

    how many layers do you recommend to spray onto a part?

  • @rocklover572
    @rocklover572 ปีที่แล้ว +1

    Do you have to wash the kit before panel lining and top coating? Also, if so, how should you wash it?

  • @eight2019
    @eight2019 3 ปีที่แล้ว +1

    Very informative! I'd like to ask if do you frequently pose your gunplas after top coating? I'm new to building plastic model kits and from what I've found, the formula on the coats like Tamiya and Mr Hobby can brittle plastic (though not as harsh as those used in industrial coats). I often pose my built gunplas but I'm afraid that after top coating one, it'll make the plastic on the joints more fragile.

    • @whiskeredgundam7765
      @whiskeredgundam7765  3 ปีที่แล้ว +2

      I have never noticed it cause the plastic to be brittle, but I typically pose them and only mess with them to dust. Plus I typically fully paint my kits.

  • @Yakkers
    @Yakkers ปีที่แล้ว

    Do I have to worry about getting topcoat in the joints or on the polycaps? I come from Warhammer and what's appealing to me about gunpla as a side hobby is that it's much more instant gratification and I don't have to do all this crazy subassembly stuff, so if I could just spray the whole thing with minimal masking and not have to worry about gumming up the joints or breaking down the polycaps or anything that would be great.

  • @N4ughtylus
    @N4ughtylus 3 ปีที่แล้ว +3

    Nice one man ! :)

  • @KillerCronos23
    @KillerCronos23 ปีที่แล้ว

    This is super helpful I'm planning to do water slides and top coat for my MG freedom 2.0. now I'm just wondering for the freedoms wings should I keep the wings bits separate then put them together or have the wings fully built and top coat?

  • @tuckerandrewstv
    @tuckerandrewstv 2 ปีที่แล้ว +1

    Not sure if I missed it in the video, but what’s the full cure time?

    • @whiskeredgundam7765
      @whiskeredgundam7765  2 ปีที่แล้ว

      It can vary depending on temperature and humidity levels. My parts usually sit for a couple days before I mess with them and they are fine.

  • @crashzaku2597
    @crashzaku2597 ปีที่แล้ว

    This is great! For me I cant paint all my kits currently so being able to top coat and still get a nice result is more than good enough for me! Also one question, is mr top coat safe for kits? I know its laquer based amd dont want my kits deteriorating cause of it.

  • @AyushRaj
    @AyushRaj ปีที่แล้ว

    I see Turn A Gundam profile pic, I subscribe

  • @alexandernettles7077
    @alexandernettles7077 3 ปีที่แล้ว

    Great video, brotato. Would you happen to know, if one were being lazy and onlu using the regular decals and pressure decals that come with most standard MGs, for the best results, would you decal before or will the decals still stick and do it after?

    • @whiskeredgundam7765
      @whiskeredgundam7765  3 ปีที่แล้ว

      For sticker decals I would do it before clear coat. It helps hide the edge of the decals and it will prevent them from peeling off over time.

  • @inoino9918
    @inoino9918 ปีที่แล้ว +1

    how long does it take to dry?

  • @BlueZTigerZ
    @BlueZTigerZ 2 ปีที่แล้ว

    Should we cover the join?

  • @ryderreinsch1488
    @ryderreinsch1488 3 ปีที่แล้ว +1

    Hey man, thanks for the advice! Do you have a link or advice on how to make the clip thing you used to hold the piece? Those look handy to have around.

    • @whiskeredgundam7765
      @whiskeredgundam7765  3 ปีที่แล้ว

      I actually just bought mine off Amazon. I think it was 50 for $10 or something.

  • @jasonex4027
    @jasonex4027 3 ปีที่แล้ว +1

    I am finishing my Dagger L, would you recomment pushing the shoulder up to cover more plastic? And with the arms or legs, is it better to have them straight like you do? I've seen some people doing it otherwise, fully bended (I guess in another attempt to cover more plastic, maybe). Finally I guess you did the skirt like the shield and so on, piece by piece. Thanks WG.

    • @whiskeredgundam7765
      @whiskeredgundam7765  3 ปีที่แล้ว +1

      You can do it bent or straight. I kept mine a little straighter because he was just going to be in a standing pose.

  • @JeffJohnson
    @JeffJohnson ปีที่แล้ว

    Great video, thanks. Quick question: Is it better to panel first then top coat or top coat first then panel line? I saw another user top coat first then panel line because they didn't want the paint from the panel line to damage the plastic. Thank again

  • @videocardgamer
    @videocardgamer ปีที่แล้ว

    Thanks for the video! I do have one question though: will it work on custom painted gunpla models like the ones painted with the Gunpla marker?

  • @casuallobster1357
    @casuallobster1357 6 หลายเดือนก่อน

    You have a very nice voice

  • @Nahduge
    @Nahduge 2 ปีที่แล้ว +2

    how many coats do you usually do and how long to wait between coats, and after the final coat before handling?

  • @DenXioTV
    @DenXioTV 3 ปีที่แล้ว +1

    Yeah nice! 😊 👍

  • @mikhazni9046
    @mikhazni9046 6 หลายเดือนก่อน

    Hey man I am a beginner so I don't really know about this stuff I even just learning how to do remove seamlines so what does topcoat does is it necessary to protect the paint from fading or what?

  • @MidNightKamisama
    @MidNightKamisama 4 หลายเดือนก่อน

    Bottle says, do not spray on decals and stickers, ¿Does damage it?

  • @chiazhiwei4499
    @chiazhiwei4499 ปีที่แล้ว

    Newbie here. Can I matt flat topcoat ---> panel lining and decal ---> gloss coat? My 1st time customizing( sort of) gunpla.

  • @Ramen551
    @Ramen551 ปีที่แล้ว

    How about top coating a piece like the unicorn

  • @hilariouzlygamin6755
    @hilariouzlygamin6755 2 ปีที่แล้ว

    945 subscriber here👌 love the tutorial

    • @whiskeredgundam7765
      @whiskeredgundam7765  2 ปีที่แล้ว

      Awesome. I'm glad you enjoyed it, and thanks for subscribing.

  • @JLMCollection
    @JLMCollection 3 ปีที่แล้ว

    I learned a lot thanks 😊

  • @andresdeleon2987
    @andresdeleon2987 3 ปีที่แล้ว +2

    does top coating by extremities can afect the articualation of your gunpla? i have put decals on a MG barbatos inerframe and im not sure if i should top coat it

  • @AldelaBagusGaming
    @AldelaBagusGaming 2 หลายเดือนก่อน

    Hi, how many layers you applied? Only one or need 2 layers of top coat?

  • @smartcraft6315
    @smartcraft6315 5 วันที่ผ่านมา

    How to avoid frosting effects?

  • @joseprotacio832
    @joseprotacio832 3 ปีที่แล้ว +3

    How many MG kits can 1 can of tamiya coat cover? :O And have you tried top coating a holo wsd?

    • @whiskeredgundam7765
      @whiskeredgundam7765  3 ปีที่แล้ว +1

      Depends on how you do it. If you do it like in the video you should get two maybe three depending on the size of the kit.

  • @lopiws
    @lopiws 3 ปีที่แล้ว +2

    100th Subscriber

    • @whiskeredgundam7765
      @whiskeredgundam7765  3 ปีที่แล้ว

      Thanks for subscribing, and I hope you enjoy the content.

  • @supermexican12
    @supermexican12 วันที่ผ่านมา

    Did you prime it or just straight top coat??

  • @TheOnboardAphid
    @TheOnboardAphid ปีที่แล้ว

    One thing I'm not sure about, how do you decide which topcoat is best? I see that glossy is always low in stock where I'm looking compared to semi-gloss and flat, does it all depend on what finish you want?

  • @typeTheEND
    @typeTheEND 2 ปีที่แล้ว

    So if I got your lessons correctly I have to spray/top coat my kit first and then apply the tamiya lining?

  • @koolkat123
    @koolkat123 ปีที่แล้ว

    Quick question, is it better to apply decals before or after matte top coat, same with shiny stickers, I'm assuming those might better for after the top coat?

  • @inoino9918
    @inoino9918 3 ปีที่แล้ว +2

    Hi there, I need some advices for my RG Tallgeese; which topcoat should i use, Flat or semi-gloss(because tallgeese has lots of round parts and the OOB plastics are glossy so i think it will look cool but i don't have an artistic eyes). And when should i put the decal stickers and foil aluminum stickers, before or after coating?

    • @heero8130
      @heero8130 3 ปีที่แล้ว

      Before coating

    • @heero8130
      @heero8130 3 ปีที่แล้ว

      Matte flat finish if you want to remove the glossy thing on ur tallgeese but i prefer semi gloss it works better

    • @inoino9918
      @inoino9918 3 ปีที่แล้ว

      @@heero8130 thanks for the information, btw, can topcoat hide the decals outline?

    • @heero8130
      @heero8130 3 ปีที่แล้ว

      @@inoino9918 yup

    • @inoino9918
      @inoino9918 3 ปีที่แล้ว

      @@heero8130 flat or semi-gloss

  • @Nisshio
    @Nisshio 3 ปีที่แล้ว +1

    The end result is awesome :) I'm curious if top coating kits will protect them from yellowing/tanning, I do see some plastics tend to lose their original color overtime so I'm looking to kinda preserve them over the years, any thoughts?

    • @whiskeredgundam7765
      @whiskeredgundam7765  3 ปีที่แล้ว

      Plastics will naturally lose color over time. All you can really do is clear coat them and keep them from sun light. They will still lose color eventually, but whit is the worst.

  • @Steven-ln3qx
    @Steven-ln3qx ปีที่แล้ว

    can nyone help me ive followed what this video said and even heated and shook the can before hand but i stilll get these little tiny dots on the sutface and it doesnt look as clean as it is on the video is there something else i need to do?

  • @xxxstubiguyxxx
    @xxxstubiguyxxx 3 ปีที่แล้ว

    I'm confused... Should you apply the Panel Line first or After.
    Many says that applying it after. What are your thoughts?

  • @aoscustoms2999
    @aoscustoms2999 3 ปีที่แล้ว +1

    Hey bro, do you play/pose/use your finished painted figures?
    I’ve been using TS-80 for a while now (tamiya flat clear) and have noticed that the coat appears dirty after a while. I’m not sure if its because I did something wrong during the process or if that clear coat just eventually wears/gets dirty. I don’t even touch my figs as much, which is why I am wondering if you’ve experienced something like this

    • @whiskeredgundam7765
      @whiskeredgundam7765  3 ปีที่แล้ว

      After I finish a kit I typically pose it and put it on the shelf. The only time I mess with them after that is to dust. If you have them sitting somewhere they get a fair amount of sunlight that could cause discoloration.

  • @iamtrillahd
    @iamtrillahd 8 หลายเดือนก่อน

    Does this top coat prevent scratches to the paint?

  • @ChangedByAlice
    @ChangedByAlice ปีที่แล้ว

    There's one thing I'm not sure how to do. I got an mg kit with a little more mechanics between armor pieces. Can I just spray over those parts or go the extra mile to cover them

  • @lezgedidonn5049
    @lezgedidonn5049 ปีที่แล้ว

    I've been using the Tamiya accent panel line, will I be having issue with this particular tamiya clear coat? Also, how of it is consumed in that HG project?

  • @LolloLoStrano
    @LolloLoStrano 2 ปีที่แล้ว

    This step is mandatory? I'm gonna ad details to my kits using markers and I need to know if this is important for the ink...