I’m about to build my first, I’ve watch sooo many build videos lately. This is by far the most thorough. Answered every question, even a few I didn’t think I had
yeah! ima save this vid once all my parts arrive, ill need it :) so far the most complete guide, straight to the point no wishy washy just what we need to build, perfect!
Cool! Though I feel like one of a few that starts with asking? is it easy, and uncomplicated to use and build the parts? and also put my PC $&@# into the case? Good looks won't matter if those are not true. Although! I don't say the other extreme of 90s cases that were all beige, or black is a good thing either.
Okay right after posting this I figured it out after fidgeting with the back hard/ssd drive bracket like a monkey. You just put your drive on its back and place the front of the bracket on the back in proportions to the screw holes. So stupid that the manual couldn't add one picture describing this intricate dark arts
I'm trying to remove the glass panel on this case, I loosened the screw as much as I could and I'm trying to take off the panel gently, but it's not coming off. Should be applying more strength? I'm worried it's going to shatter once it seems like the glass is only coming off from one side Edit: yeah, I just needed to pull harder. It feels really wrong but it comes off just fine
I'm looking to get a very similar configuration but I'm planning to add an HDD to it along with an SSD. The video says there's no room for it in the blueprints but I've read comments online of people who added it. Is it possible, and if so, how?
Hi, comp sci degree here buying a pc for the first time. The instructions you gave were great, but the small parts you left out were extremely tedious to figure out. I constantly referenced manuals and the motherboard for the correct location of cables. Please deliver more detailed content for first time buyers. Im talking step by step with explanations at each step.
Your channel is fantastic brother, I always have reservations about certain things when I don’t know the full details. These videos help alleviate that concern. Keep up the awesome work!
Screws are clearly marked, huh?! Screw measurements on the little bags don't indicated screw "location/usage". Which screw measurement is the standoff screw?
Did everything the same. Didn’t work I think I’d rather blow off both my hands and have nubs for the rest of my life rather than trying to figure out how the fuck to build this shit again
lol yeah! Although! an advantage to the fatal four of fury. Is that when (or if) you go wtf is this thing for? you'll be more likely to have an answer. Though ASUS thinks a 7800XD is meant to double as a firecracker with some undocumented functionality.
Very similar to my build... my dude. yours is a tad bit slower then mine. lol but great minds think alike. lol Ryzen 7 7900x overclocked to 5.5ghtz Be Quite Masterclass 800 MSI Mag X670e Tomahawk Wifi Gskill Trident RGB 4x32GB 128ghtzz Samsung 4TB 990 pro Nvidia Founders 4090 EVGA 1600w 80 Cablemod black/silver cables Windows 11 Bluetooth keyboard and mouse rgb Samsung 32inch 240 htz 4k monitor for the ultimate gaming computer i play 2077 Liberty at 144fps which is awesome
"and then push the cable back" -bad advice - this is why those 12vhpwr gpu cables were melting..dont push it back, you will bend it too much in on point..it should have bigger curve from the gpu....bad advice
thank you for the video and effort. I had a hard time to understand what you where saying without the captions on. You sounded like you were rushing through the scripts. I had to replay a several times to capture what you were saying. It could be me, but I hope you grow more as a youtuber. Cheers.
Many thanks for this very helpful video! Thankfully my case came with the fans preinstalled and ready to go because the fan mounts seemed tricky to install…
I’m happy it’s dark tinted as I really don’t care about RGB rainbow pc’s. I just like an all black - more adult - look. It’s very neat together with this case.
i may have missed it as i am watching this quite late so brain is not fully operational. where did you get the fan hub? did it comes with either the fans or case? or did you get it separately? thank you in advance
are you sure that the pre installed are not pwm ? on the website for the case the fans that are listed as pre installed are two F120Q fans. which are listed as pwm on a place where i can buy them .
hey chris thanks for the video im looking to do a build soon with a 280 AIO in the NZXT H5.. do you think its a good idea to front mount vs top mount the AIO?
In NZXT's website, it says you can only fit 2 x 120mm fan on top of the case. I'm planning to buy this case and planning to mount 1 140mm fan on top. Can you confirm if it will really fit? Great video tutorial btw!
Thank you for this video! Even though I had a different motherboard and cooler I still managed to build my first PC! You are a legend for noobs like me haha! Keep up the good work!
I just got this case, its great and easy to build in. Love the included Front panel header being one whole piece instead of little pieces. But the side panel is very dark, my RGB on the GPU is very dimm.
Hello Christopher, you mentioned in the video that you can fit two 120mm fans or two 140mm fans on the top. Is that correct? Documentation from NZXT is showing only two 120mm fans are able to be fit up top.
I’m about to build my first, I’ve watch sooo many build videos lately. This is by far the most thorough. Answered every question, even a few I didn’t think I had
did u get that case?
@@gcxcf I got that case like yesterday and I love the case.
Did you build it?
@@gcxcfyes I did use this case, love it
@@arkix7212yes I did, turned out great
yeah! ima save this vid once all my parts arrive, ill need it :) so far the most complete guide, straight to the point no wishy washy just what we need to build, perfect!
I just finished my first build yesterday in no small part to this video. Thank you so much for being so thorough.
Thanks for this perfectly organized video! I'm doing my first PC build in this case and this is preparing me so well!
Hope to see you build in the Phanteks NV7. Its one sexy case.
One should be on the way
Phanteks NV7 one of the best!
Thank you for the video it was very handfull!
Are you releasing a review for this case anytime soon?
No review for this one, just for pre-released cases
what if I have this case but cant open the glass after the build. I am scared to break the glass and its not bugging
I have a IGABYTE B550 AORUS ELITE AX V2 AM4 AMD B550 ATX Motherboard will this work the pc
I Things you Are the Best Form allTH-camr 😊
Cool! Though I feel like one of a few that starts with asking? is it easy, and uncomplicated to use and build the parts? and also put my PC $&@# into the case? Good looks won't matter if those are not true. Although! I don't say the other extreme of 90s cases that were all beige, or black is a good thing either.
Thanks for not showing the hard drive installation
Same 😂
The reason I watched the video is because I had problems with the ssd
@@burningbb lmao right
Yall figure it out? Literally only reason I came here and he installs a freaking nvme like how elitist
Okay right after posting this I figured it out after fidgeting with the back hard/ssd drive bracket like a monkey. You just put your drive on its back and place the front of the bracket on the back in proportions to the screw holes. So stupid that the manual couldn't add one picture describing this intricate dark arts
To be fair, he installed the nvme
Mine isn’t turning on
I'm trying to remove the glass panel on this case, I loosened the screw as much as I could and I'm trying to take off the panel gently, but it's not coming off. Should be applying more strength? I'm worried it's going to shatter once it seems like the glass is only coming off from one side
Edit: yeah, I just needed to pull harder. It feels really wrong but it comes off just fine
I’ve been using a prying tool for plastic and just slide it along the top and it comes off easily
Another exceptional video. Clear and concise, Thank you!
No problem
@@ChristopherFlannigan Mine isn’t turning on I followed step by step
Nice video! 👍👍
Thanks @NZXTglobal it's a nice case. I would be happy to cover more of your cases on the channel if your interested?
I love the brand NZXT 💜
I really like the style of your videos, you go into detail where it matters and explain things really well. I appreciate you
I'm looking to get a very similar configuration but I'm planning to add an HDD to it along with an SSD. The video says there's no room for it in the blueprints but I've read comments online of people who added it. Is it possible, and if so, how?
I'm brand new to computers and everything with them, so this list was extremely thorough on my case and motherblard installation. Awesome job!
Great to see you doing an NZXT build, great job as always
Thanks
I'm a first time builder. And one of my bogles is: why aren't all motherboards, cases, and cables labelled, color coded, and easy to use clips?
Hi, comp sci degree here buying a pc for the first time. The instructions you gave were great, but the small parts you left out were extremely tedious to figure out. I constantly referenced manuals and the motherboard for the correct location of cables. Please deliver more detailed content for first time buyers. Im talking step by step with explanations at each step.
haha just built inside this case last week could have done with this guide then 😀 keep up the great content best build guides on YT
Thanks, will do
Your channel is fantastic brother, I always have reservations about certain things when I don’t know the full details.
These videos help alleviate that concern. Keep up the awesome work!
Screws are clearly marked, huh?! Screw measurements on the little bags don't indicated screw "location/usage".
Which screw measurement is the standoff screw?
Did everything the same. Didn’t work I think I’d rather blow off both my hands and have nubs for the rest of my life rather than trying to figure out how the fuck to build this shit again
Can the nxtz h5 flow fit the shapire Nitro+ 7900xtx with a b650 motherboard?
I'd like this case to allow 280 mm AIOs at the top.
Yes, case is very compact
Id like you to look for a case that does, instead of hopelessly commenting something useless that wont happen
@@krayt10right😭
@@krayt10lmaoo
I don’t really think you need anything beyond a 240mm aio and if you do this is definitely the wrong case to buy if your parts are that high end
Finally someone using mobo other than fatal four (Asus,Asrock,Gigabyte,MSI)
lol yeah! Although! an advantage to the fatal four of fury. Is that when (or if) you go wtf is this thing for? you'll be more likely to have an answer. Though ASUS thinks a 7800XD is meant to double as a firecracker with some undocumented functionality.
Thank you! You are a big help especially to newbies on PC building like me.
me too, very useful
your accent is insane... like WHAT AM I HEARING
I love this tutorial but one question, does this case come with a rgb hub?
Very similar to my build... my dude. yours is a tad bit slower then mine. lol but great minds think alike. lol
Ryzen 7 7900x overclocked to 5.5ghtz
Be Quite Masterclass 800
MSI Mag X670e Tomahawk Wifi
Gskill Trident RGB 4x32GB 128ghtzz
Samsung 4TB 990 pro
Nvidia Founders 4090
EVGA 1600w 80
Cablemod black/silver cables
Windows 11
Bluetooth keyboard and mouse rgb
Samsung 32inch 240 htz 4k monitor
for the ultimate gaming computer
i play 2077 Liberty at 144fps which is awesome
Love to watch your build videos.
Im not fan of NZXT cases but this one its OK!
All the parts is perfect!
Awasome !!!
Miller Edward Jackson Scott Hernandez Mary
where could i apply my hdd
Happy Easter 🐰🐰
Thanks, you too
Thanks for the video man !! Helped me with my
Build so much
How do I add my HDD to the case
"and then push the cable back" -bad advice - this is why those 12vhpwr gpu cables were melting..dont push it back, you will bend it too much in on point..it should have bigger curve from the gpu....bad advice
There is no HDD installation manual
Brando Heights
What could I do if my motherboard doesn’t have the front panel usb c insert
Do you have a answer I have this problem too
thank you for the video and effort. I had a hard time to understand what you where saying without the captions on. You sounded like you were rushing through the scripts. I had to replay a several times to capture what you were saying. It could be me, but I hope you grow more as a youtuber. Cheers.
Many thanks for this very helpful video! Thankfully my case came with the fans preinstalled and ready to go because the fan mounts seemed tricky to install…
Good job
Just wondering what the size of the screw you used for mounting the fans on the radiator?
28-30mm its ok!!
Great build. That power supply is a beast, I guess because of the 4070Ti?
it is on the PSU cultlist so i guess yes xD
I’m happy it’s dark tinted as I really don’t care about RGB rainbow pc’s. I just like an all black - more adult - look. It’s very neat together with this case.
So if I understand it right at 17:00 you show 2 cables but you don’t need both if I want I can just use the usb cable and everything will work right?
What's that Case in the background? Looks neat.
HAF 700 evo
WHERE DOES THE NZXT CORD GO?????
Would you do a H9 version aswell?
thank you!!! i successfully built my first pc yesterday and this helped me out so much !!! :))
Lovely build thanks! Looking at my future pc and really like the look of this case!
Nice guide thank you
Thanks
so, can i fit a kraken 240mm elite aio on the top? it’s the liquid cooler, wanna make sure with someone who knows before i buy it!
Im torn between having it built at the place they get the parts or to build it nyself, which would also allow me to get a different graphics card
Do you need some additional support for the graphics card? Or it holds itself ok without any?
Tyler Well
Looks beautiful I'm building my 2nd PC in the same case now
Instead of staying plug this in there say plug this into specific plugs my motherboard isn’t the same as urs
i may have missed it as i am watching this quite late so brain is not fully operational. where did you get the fan hub? did it comes with either the fans or case? or did you get it separately? thank you in advance
are you sure that the pre installed are not pwm ? on the website for the case the fans that are listed as pre installed are two F120Q fans. which are listed as pwm on a place where i can buy them .
Is there any tips taking the glass off? I feel like mine is stuck and I'm afraid to push too hard.
My case already had 2 fans in front and i dont know how to connect them it doesn't look like yours
Can you connect the Al140 fans to the Al120 fans with the cables you get in the 3 pack of Al120 fans ?
Love hearing the NI accent. Much love from portadown
Putting all the parts on the mother board is easy I’m just clueless on the cables
hey chris thanks for the video im looking to do a build soon with a 280 AIO in the NZXT H5.. do you think its a good idea to front mount vs top mount the AIO?
Corsair 4000d or H5 flow???
Can't go wrong with either but I would probably go 4000d
Como se dice en mi país... 🇦🇷 "está fachera" (muy atractiva) 😮
do the screwdrivers come with or no and if not what screwdrivers do I need to buy?
Not going to build a pc anytime soon then too watched the whole video at regular speed and enjoyed 😊
47900 Bergstrom Highway
In NZXT's website, it says you can only fit 2 x 120mm fan on top of the case. I'm planning to buy this case and planning to mount 1 140mm fan on top. Can you confirm if it will really fit? Great video tutorial btw!
You can only put 140mm fans in the front, nowhere else.
Which wires were you installing on the motherboard
CÈSE
Thank you for this video! Even though I had a different motherboard and cooler I still managed to build my first PC! You are a legend for noobs like me haha! Keep up the good work!
I just got this case, its great and easy to build in. Love the included Front panel header being one whole piece instead of little pieces. But the side panel is very dark, my RGB on the GPU is very dimm.
meh video, skipped a lot of steps, used s hub?????
Can I put an Asus tuf 4080 inside that case?
My power button isn’t working?
Yo how do you change the colour of the rgb fans?
h5 flow or h5 elite, which one is better?
Thank you very much, I am planning to build a pc like that 👍🙏
Is there any way that you can change rgb color?
my saviour LORD FLANNIGAN!
Hi, is the glas window dark or clear?
Building my first pc today and this helped alit
You diditn mention the fan hub… 😢
Does it come with the fan hub?
Hello Christopher, you mentioned in the video that you can fit two 120mm fans or two 140mm fans on the top. Is that correct? Documentation from NZXT is showing only two 120mm fans are able to be fit up top.
Can u put 2 140 mm fans in the front ?
@@xavierparris6058 I was able to put 2x 140mm in the front. You cannot add 2x 140mm to the top.
Wait so all slots take 120 mom fans?
I like the dark panel!
can you change the rgb color
Do u really need 1200w?
great video man!
Is the front panel type c on every board I can’t find it
Did you find a answer I can’t one for mine
Does it comes with 2 140mm front fans?
The RGB version does, the standard doesn't
how did you connect the fan cables. With a fan hub? And if u used a fan hub which one did u use?
i am having the same issue did you ever figure this out
I found out how to do it with nzxt rgb hub and my h5 flow case
@@JosephPoo
Great video, thanks!