ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Removing climbing anchor and reusing the hole for new bolt.
ฝัง
- เผยแพร่เมื่อ 2 มิ.ย. 2019
- A demonstration of Climb Nova Scotia members replacing a standard wedge bolt anchor commonly used for anchors for rock climbing. Using a 12 volt impact driver with a socket head, two bolts, and a washer we successfully spin the bolt inside the hole making it loose enough to wiggle it in the hole. Then we use a 8 tone hydraulic press to pull the bolt leaving a 3/8" hole that we redrill with 1/2" to place a titanium glue-in.
Nice work guys 👏
lots of hardwork
Where can you get the hydraulic press?
We purchased ours on Ebay. Search for "hydraulic knockout punch".
Most have a hose or a 90 degree body that's not suitable.
The style we have is a knockoff of "Greenlee 7804-SB KNOCKOUT PUNCH KIT"
www.ebay.ca/itm/ECLIPSE-902-482-10-Piece-Hydraulic-Knockout-Punch-10-gauge-Type-C-Punch-124184/283777202674?epid=17012034517&hash=item42127079f2%3Ag%3A7sYAAOSwUG1eQFP4&fbclid=IwAR3Mdpa6gkAWnPtpkjjQEJyvv_9lLPzhc4_C9dhbICz81xwRA-X3vW3d3EM
Sorry that it took so long to reply.
Where can i buy the pull out tools?
same question. Where can I purchase an 8 tone (ton?) hydraulic press?
We purchased ours on Ebay. Search for "hydraulic knockout punch".
Most have a hose or a 90 degree body that's not suitable.
The style we have is a knockoff of "Greenlee 7804-SB KNOCKOUT PUNCH KIT"
www.ebay.ca/itm/ECLIPSE-902-482-10-Piece-Hydraulic-Knockout-Punch-10-gauge-Type-C-Punch-124184/283777202674?epid=17012034517&hash=item42127079f2%3Ag%3A7sYAAOSwUG1eQFP4&fbclid=IwAR3Mdpa6gkAWnPtpkjjQEJyvv_9lLPzhc4_C9dhbICz81xwRA-X3vW3d3EM
Are the spacer sleeves homemade? If so, what material are you using? Looks like nylon/Teflon but can’t tell for sure.
Delrin by the looks of it.
Those knockout punches are pretty pricy. Is there another way without the punch?
Him the hydraulyc adapter to the bolt is self made?
Same question here.. Where did you find the adapter?