Thanks so much for this tutorial as I own a 2003 Astra with cruise control that I have blown a Piston ring in and just bought a second hand Astra that does not have cruise control and I will now bcoz of your video will take the cruise control out and put it in my purchased Astra. Many many thanks as I loved having cruise control. 👍🏻🇦🇺
Your car would have had cruise control initially and the stalk has been changed. Only cars with cruise control had the wiring loom, it runs through the ECU and is not present in any car without it being standard. So you can't just fit the stalk and get cruise control unfortunately.
Thanks for information. You may be right. I don't know why, but a lot of cars that I had to deal with had all the wiring, but no control on the switch. I always propose to check the wiring before buying the handle. :)
@Immortal Cluch and brake pedal switches that turn off cc. If a connector is present at your steering wheel it might be that those switches on the pedals are also present. If they are not, you'll have to install them.
In My case it was just plug n play. You have to check if Your car has all the hardware required for cruise control. If only a swich is missing, then it should work without any activation.
Hello, thank you for this instructional video. However, after installing my new indicator switch into my Astra G (also a 2 liter DTI, Y20DTH for engine model if I'm correct), it doesn't work. OPCOM shows that the Clutch and Brake switches are present and functional, but the Cruise Control switch for O(off) is always active, and other buttons are being ignored. Do I need to go remap my ECU for this, or am I missing something?
hello video is great. congratulations .. after installing cruise control, does it need to be activated from the computer? is there a need for this will it work automatically? my vehicle is 2000 elegans, automatic model.
It should work with jus installation of switch.. You should try searching for a 4 pin connector as I showed in the installation video. If it is present, it should be jus a matter of light switch. If it's not, then it might need a little more work.
In my car it was just plug and play. I heard that in most such cars cruise contrall is built in from the factory, but the handle with controls not in every one.
@@tomik499 Most likely. You can also check under brake and cluch pedals. There should be switches that turn off cruise control when pedals are pressed.
It should. You should try searching for a 4 pin connector as I showed in the installation video. If it is present, it should be jus a matter of light switch. If it's not, then it might need a little more work.
What kind of throttle valve do you have in your car? Mechanical or electric? Cause I'm thinking if it's Mechanical how the cruise control will operate if the valve opening is controlled depending on how we press the gas pedal.
As much as į know. If that 4 pin connector is not built in it would be quite difficult. You will need not only that switch, but also a cluch detector connection as well as brake pedal connection. You might also need to program your computer, to make cruise control possible. I do not really know, but in some cars all thees assets are present, and in some - not. Maybe it's something with engine code.
Hi!! I have a question..for a opel astra g 2.0 dti from 2003..do you think cc will work? I hope so, because every week i need to do 400 km..and i really need that thing.. Also, thanks for your video..btw..i'm 18 and this is my first car.
Hi, check if your car has cluch and brake switches installed. They are visible under the pedals. If they are, then cc should be working fine. If not, you might have to buy additional hardware and remap your ecu. 😉
Thank you for the instructions. There must be some kind if servomotor to regulate the throttle in the engine room. Did you install that too, or was it already installed? Thanks, Palle
Hi, the accelerator throttle pedal is electrically controlled, so nothing else needs to be installed in my case. The CC switch comunicates witk ECU and sets speed as it was sent electrically from pedal.
Hello there; My vehicle is 200 Model Opel Astra G 1.6 16V Engine model X16XEL. Is the cruise control suitable, is it necessary to do another action on the engine or gearbox when it is installed? ( Merhaba; Aracım 200 Model Opel Astra G 1.6 16V Motor modeli X16XEL . Hız sabitleyici uygunmudur takıldığında motor veya şanzıman üzerinde başka bir işlem yapmak gereklimidir?rhaba; Aracım 200 Model Opel Astra G 1.6 16V Motor modeli X16XEL . Hız sabitleyici uygunmudur takıldığında motor veya şanzıman üzerinde başka bir işlem yapmak gereklimidir? )
Hi, I am not familiar with this type of engine. Try looking for a connection behind your steering wheel. If it is present, then it should justbe plug n play. But if there is not, then you might need to put in some work.
@@thegreatfederico7407 Hello, did you install the clutch switch after installing the cruise control lever? ( Merhaba , Hız sabitleyici kolunu taktıktan sonra debriyaj müşürü'de taktınız mı? )
I never thought that the installation would be that easy, thank you for the video! 👍
Awesome video buddy. Thank you so much for the detailled explination.
Thanks so much for this tutorial as I own a 2003 Astra with cruise control that I have blown a Piston ring in and just bought a second hand Astra that does not have cruise control and I will now bcoz of your video will take the cruise control out and put it in my purchased Astra. Many many thanks as I loved having cruise control. 👍🏻🇦🇺
Happy to help you ;)
Quel prix est site pour lavoir
I tried to find this for some days, thank you
Top man
Hello you must activate cruise control with a diagnostic case like Opcom !? Thanks
In my case I didn't need to activate it. It was just plug n play. In some cases You might have to activate it.
Your car would have had cruise control initially and the stalk has been changed. Only cars with cruise control had the wiring loom, it runs through the ECU and is not present in any car without it being standard. So you can't just fit the stalk and get cruise control unfortunately.
Thanks for information. You may be right. I don't know why, but a lot of cars that I had to deal with had all the wiring, but no control on the switch. I always propose to check the wiring before buying the handle. :)
Thank you for your Videos
If it doesn't work just with the switch, you might have to remap your ecu. You might also need to install some hardware to the pedlals.
@Immortal Cluch and brake pedal switches that turn off cc. If a connector is present at your steering wheel it might be that those switches on the pedals are also present. If they are not, you'll have to install them.
Ok
Do you know where the cruise control module is? I want to see if this will work in my astra thanks
I don't know. Maybe in the CPU.
you need to activate this from tester or something?
In My case it was just plug n play. You have to check if Your car has all the hardware required for cruise control. If only a swich is missing, then it should work without any activation.
Hello,where is the video that you open the autopilot with the program opcom?
Hi, it s pretty much plug and play, so no need to play with opcom.
Ok,i asked you because I saw videos explaining that you need to open the autopilot with opcom
Hello, thank you for this instructional video. However, after installing my new indicator switch into my Astra G (also a 2 liter DTI, Y20DTH for engine model if I'm correct), it doesn't work. OPCOM shows that the Clutch and Brake switches are present and functional, but the Cruise Control switch for O(off) is always active, and other buttons are being ignored. Do I need to go remap my ECU for this, or am I missing something?
Yes, You might have to remap your ECU, but firstly check connections of the switch and O (off) button, maybe it is defective.
hello video is great. congratulations .. after installing cruise control, does it need to be activated from the computer? is there a need for this will it work automatically? my vehicle is 2000 elegans, automatic model.
It should work with jus installation of switch.. You should try searching for a 4 pin connector as I showed in the installation video. If it is present, it should be jus a matter of light switch. If it's not, then it might need a little more work.
@@thegreatfederico7407 It worked on mine 2000 astra automatic, it has drive by wire. Automatic and cc is just ideal..
Does it work on opel astra 2003 1.6i?
and did you program the lever at all or its automatic ?
Hi, it was all automatic in my case.
@@thegreatfederico7407 how much euros was the lever ? im form bulgaria and here is about 80euro
@@zedex3560 20 euros
hey dude ,how much was the new lever ?
Hello but my it have 4 pin connector and button at the breke pedal but cc didn't work . Any idea?
You need to allow cruise control with the diagnostics.
Is that similar to the eBay's one?
No need to pogramm anything? Just plug and play?
In my car it was just plug and play. I heard that in most such cars cruise contrall is built in from the factory, but the handle with controls not in every one.
@@thegreatfederico7407 I have a 1.7 dti from 2004 how do i know if that cable is there?
@@tomik499 You should take off a cover behind the steering wheel and search for a connection.
@@thegreatfederico7407 and if it is there it’s just plug and play?
@@tomik499 Most likely. You can also check under brake and cluch pedals. There should be switches that turn off cruise control when pedals are pressed.
is ur Astra with electronic throtle body or wire?
It is electronic throttle body :)
Děkuji. Pomohlo.👍
Hi great federico. I have a astra g 1.4 16v club. Is this system work my car to? İf I change only Light switch
It should. You should try searching for a 4 pin connector as I showed in the installation video. If it is present, it should be jus a matter of light switch. If it's not, then it might need a little more work.
what about the 1999 model?
also can you give me the link of the product
Mine is 1999 model :) Sorry, but I don't have a link.
What kind of throttle valve do you have in your car? Mechanical or electric?
Cause I'm thinking if it's Mechanical how the cruise control will operate if the valve opening is controlled depending on how we press the gas pedal.
Does it have a X14XE engine?
What if we don't have that 4 pin connector built-in? Any idea how to wire it?
As much as į know. If that 4 pin connector is not built in it would be quite difficult. You will need not only that switch, but also a cluch detector connection as well as brake pedal connection. You might also need to program your computer, to make cruise control possible. I do not really know, but in some cars all thees assets are present, and in some - not. Maybe it's something with engine code.
With Astra gl 2000?
Hi!!
I have a question..for a opel astra g 2.0 dti from 2003..do you think cc will work?
I hope so, because every week i need to do 400 km..and i really need that thing..
Also, thanks for your video..btw..i'm 18 and this is my first car.
Hi, check if your car has cluch and brake switches installed. They are visible under the pedals. If they are, then cc should be working fine. If not, you might have to buy additional hardware and remap your ecu. 😉
Hello,
I have the 4 pin connector in the cruise control light switch but it don't working. Do you know the problem?
Hi, did You check under the clutch and brake pedals for switches, which are required for cruise control to work?
I have Opel Meriva 2004 , 1.7 cdti and its not working for me, i have done everything the same as you on this video ..
Sad to hear. But astra and meriva differs and it's 5 years apart, so something might be different.
Thank you for the instructions. There must be some kind if servomotor to regulate the throttle in the engine room. Did you install that too, or was it already installed? Thanks, Palle
Hi, the accelerator throttle pedal is electrically controlled, so nothing else needs to be installed in my case. The CC switch comunicates witk ECU and sets speed as it was sent electrically from pedal.
Hello there; My vehicle is 200 Model Opel Astra G 1.6 16V Engine model X16XEL. Is the cruise control suitable, is it necessary to do another action on the engine or gearbox when it is installed?
( Merhaba; Aracım 200 Model Opel Astra G 1.6 16V Motor modeli X16XEL . Hız sabitleyici uygunmudur takıldığında motor veya şanzıman üzerinde başka bir işlem yapmak gereklimidir?rhaba; Aracım 200 Model Opel Astra G 1.6 16V Motor modeli X16XEL . Hız sabitleyici uygunmudur takıldığında motor veya şanzıman üzerinde başka bir işlem yapmak gereklimidir? )
Hi, I am not familiar with this type of engine. Try looking for a connection behind your steering wheel. If it is present, then it should justbe plug n play. But if there is not, then you might need to put in some work.
@@thegreatfederico7407 Hello, thank you very much for the information ,,,,,,,, ( Merhaba, Bilgilendirme için çok teşekkür ederim )
@@thegreatfederico7407 Hello, did you install the clutch switch after installing the cruise control lever? ( Merhaba , Hız sabitleyici kolunu taktıktan sonra debriyaj müşürü'de taktınız mı? )
@@hasantopcu182 Hi, no i did not. I only installed the handle ant everything worked fine.
@@thegreatfederico7407 Hello, thank you very much for the information ,,,,,,,, ( Merhaba, Bilgilendirme için çok teşekkür ederim )
when other videos like test cruise control
Maybe this weekend. It's quite hard to film and test it at the same time :)
The new video was just uploaded. Enjoy!