Wow, I love the new stripes on your C8 Corvette body! Especially the bright pink color! It just pops outside in the sunshine. And I really like your neighborhood too, your home along with all of the other homes look super nice. You are fortunate to live there!
I use a dry wide paint brush and electric leaf blow to clean off the cars i run on road. And the simple green foam you reviewed on your channel for the off road cars
In my 2.0, I installed a Castle Mamba Max Pro SCT with a 5700 motor and run it on 2s with the brushed gearing. It is a BLAST to drive. Runs cool, fast, drifts on demand, long run times. Burned up stock tires after a few runs. Installed a new set of VXL tires.
Nice crispy edge on your lawn. And the mow looks good! (I run a landscape business, so I always notice "weird" little things like that. But yeah, your edging skills are top notch. 🔥🔥👍🏼👍🏼💯🤟🏻
I think it needs a TQI radio. I haven't driven mine yet but I do have a new TQI radio. These cars get all over the place. My 2.0 Vette with brushless is dialed with a TQI. I'll see. You like all the cars parked across from you now. Your street used to be wide open.
I also put 55 35 gearing with brushless and the stock transmitter receiver is not good enough . I now use my dx5 transmitter with the avc telemetry receiver and it is %100 easier to handle . I'm getting rear end wobble over 60 , I think the rear end needs more down force I'm thinking of mounting a bigger wing , and the stability kit from gpm racing I'm installing as soon as it arrives. My goal is to exceed 80 mph . Any suggestions on higher speed tires? Keep up the great videos.
Just picked up the Supra, and came across your vid, Mark. Ima mod this thing with a center diff and a proper setup so it turns. I know I this comment is on the zombie lagwagon, but I digress. Have you ever checked temps across your tyres after a run, or properly setup the car?
Hey Mark. You said that you need to get rid of some stuff over there. You don't happen to have a Novarossi carburetor that I can use on my LRP .32 do you? I will pay decent for it. I've been looking everywhere!!!
Seeing you control the 3.0 so smoothly has just made me realise that yes I'm either really bad or your really good. I do have a question a little of topic though. I've got a latrax rally that has been modded to the moon and I'm trying to break the 70mph barrier. The slightest of steering makes it flip like 10 times costing me an arm and a leg to fix. Is there anyway to reduce that? My ride hight is around 8mm front 11mm rear but any lower then small bumps sends it flying. Any help would be much appreciated thanks 👍
I just picked up a FWD touring car and I want to practice on the local basketball court… What practice tires would be good on unconditioned asphalt/pavement?
After watching a few TH-cam vids on vxl upgrades to the 4-tec 3.0 and they were all complaining about the terrible handling - most blamed it on the tyres not being glued on properly. I did write to Traxxas asking if they are going to release a brushless vxl version but the answer was kind of 'we don't know'. I reckon if enough folks write to them then they will release a brushless version that will have the handling to cope with the power. Get writing folks......
Thanks Mark. Mine is on hold because I wanted to wait on a bud just like this one. Now I wanna see the ZZ Top style car (hot rod) 😆 in person to choose. 🇨🇱👍
About month ago I bought my first rc arram grantor voltage and wasn't what I want to be it keep shutting down all time so I need really help with my rc before I buy other rc my next it going to D10 dragster .
Should be no reason a 70T spur couldn't be used. As a maybe of fact, should be no reason (if building a speed-run car) the 55T spur couldn't be used. But, did general bashing, the 70T should work nicely. Right now, I'm running the stock gearing with the Velineon 3500kv...but, I'm about to upgrade even further - Castle Copperhead ESC, Tekin Pro4 HD 3500kv motor, and 70T spur. I'm currently undecided on the pinion undecided, but I'll be starting with the 18T. As for the "stability problem" with the higher gearing, I don't think the real 'problem' was with the gearing...I'm thinking the real 'problem' is that there's a lot of 'play' where the suspension arms connect to the chassis, as well as where the C-hubs & rear carriers connect to the suspension arms. If you think about how disastrous that would be on a race buggy (which is going slower), just imagine how disastrous that is on a vehicle like this that's going faster.
Something I forgot to mention in my previous comment is that Richie (Driftomaniacs TH-cam channel) and I, each, have 4Tec 3.0s running the Velineon 3S system...but, we've also give in 50-50 on a third 4Tec 3.0, which we'll be converting into a speed run car running...you guesses it...55T/35T gearing (unless we can get the 55T/34T gearing to fit).
Hey I have been watching your channel over a year now I used loved play rc when I were kid my 1st rc were duke of Hazzard car that back up turn front wheel Everytime and some how I did something to that make that car fly fast hallway at deaf school drom cause I added 4x 8v batteries so I went awe aww that really freaking cool but it didn't burn or fire electronic in charger but I crashed into the wall shattered Dodge Charger rt and I still has the body of the Charger's top of rebel flag and right door what left of it after shattered into wall I got hugh trouble when my supervisor heard crash like firework I got suspended for a week in dorm, but it were my best memories of my 1st rc.
For a car that looks so great the speed and performance is a real let down. :( I'm going to wait for the faster version there's no way they won't release one I feel. The body and chassis look amazing.
I'm glad to hear you say giveaway and turns like that cuz a lot of these TH-camrs don't but I bought a few cars here recently dr10 just are exceed and now I just purchased that low cb100 I believe Camaro if you give me some stuff away that's great I hope I can receive something but if not send me a list of anything or potentially selling that would help support the channel and make you one of my favorite TH-cam Stars thanks a lot love your show
Damn your race paint scheme is so sick 😍
Wow, I love the new stripes on your C8 Corvette body! Especially the bright pink color! It just pops outside in the sunshine. And I really like your neighborhood too, your home along with all of the other homes look super nice. You are fortunate to live there!
That paint job is sweet. 👍
p.s. Never underestimate the damage a parked car’s tire can do to an RC. Right up there with the CURB. 😱
Yup! I’m gonna upgrade my 3.0 to this setup now! Great video!
That was one my favorite car video Big Tymers Get your roll on!!! Get it Mark!!!
I use a dry wide paint brush and electric leaf blow to clean off the cars i run on road. And the simple green foam you reviewed on your channel for the off road cars
In my 2.0, I installed a Castle Mamba Max Pro SCT with a 5700 motor and run it on 2s with the brushed gearing. It is a BLAST to drive. Runs cool, fast, drifts on demand, long run times. Burned up stock tires after a few runs. Installed a new set of VXL tires.
Nice crispy edge on your lawn. And the mow looks good! (I run a landscape business, so I always notice "weird" little things like that. But yeah, your edging skills are top notch. 🔥🔥👍🏼👍🏼💯🤟🏻
Im sure he pays someone else to keep his yard.
That's so cool.....wanting the new factory five couple in red....should be a blast.....have fun and be safe👍
Just picked up the red coupe today and I'm definitely going to switch it over to your set up
I think it needs a TQI radio. I haven't driven mine yet but I do have a new TQI radio. These cars get all over the place. My 2.0 Vette with brushless is dialed with a TQI. I'll see. You like all the cars parked across from you now. Your street used to be wide open.
Got a brushless stampede. Hate it wheelies to much. Got any ideas?
If you would enable TSM ,then you could get the top speed runs and the car would stay straight, hard to drive without TSM
👍👍👍 Do you know they re-release the Losi Baja Rey 10th scale 🖖🖖
I also put 55 35 gearing with brushless and the stock transmitter receiver is not good enough . I now use my dx5 transmitter with the avc telemetry receiver and it is %100 easier to handle . I'm getting rear end wobble over 60 , I think the rear end needs more down force I'm thinking of mounting a bigger wing , and the stability kit from gpm racing I'm installing as soon as it arrives. My goal is to exceed 80 mph . Any suggestions on higher speed tires? Keep up the great videos.
Nice barbie jeep in the background 🤣
Just picked up the Supra, and came across your vid, Mark. Ima mod this thing with a center diff and a proper setup so it turns. I know I this comment is on the zombie lagwagon, but I digress. Have you ever checked temps across your tyres after a run, or properly setup the car?
Hey Mark. You said that you need to get rid of some stuff over there. You don't happen to have a Novarossi carburetor that I can use on my LRP .32 do you? I will pay decent for it. I've been looking everywhere!!!
Seeing you control the 3.0 so smoothly has just made me realise that yes I'm either really bad or your really good.
I do have a question a little of topic though. I've got a latrax rally that has been modded to the moon and I'm trying to break the 70mph barrier. The slightest of steering makes it flip like 10 times costing me an arm and a leg to fix. Is there anyway to reduce that? My ride hight is around 8mm front 11mm rear but any lower then small bumps sends it flying.
Any help would be much appreciated thanks 👍
I just picked up a FWD touring car and I want to practice on the local basketball court… What practice tires would be good on unconditioned asphalt/pavement?
Hi Mark, im getting a Tekno Et410.2 1/10 scale was wondering what electronics you would run in it ? I want to try racing from watching you.
After watching a few TH-cam vids on vxl upgrades to the 4-tec 3.0 and they were all complaining about the terrible handling - most blamed it on the tyres not being glued on properly.
I did write to Traxxas asking if they are going to release a brushless vxl version but the answer was kind of 'we don't know'.
I reckon if enough folks write to them then they will release a brushless version that will have the handling to cope with the power.
Get writing folks......
What is that tool set u have
Thanks Mark. Mine is on hold because I wanted to wait on a bud just like this one. Now I wanna see the ZZ Top style car (hot rod) 😆 in person to choose. 🇨🇱👍
Would be a good tribute to Dusty Hill
If they would sell it in clear I would make a ZZ coupe. But yes. We lost another great one. RIP Dusty.
Did you overheat the motor?
I got the same body but I running xpress XQ2S
That gap is for a bigger esc I think man🤔🏎💨
62 spur 30 pinon is good on mine.
Fiberglass drywall repair tape and shoe goo will permanently fix those body post holes
A giveaway sounds freaking awesome
Would TSM help?
Do we need to start calling you Mark "The Tool Man" Santa Maria, more power?
That corvette will look better On a Display. Its to nice.
Is that Melissa Jeep. I missed the live chat last night
What do i need to do to get the give aways you do?
About month ago I bought my first rc arram grantor voltage and wasn't what I want to be it keep shutting down all time so I need really help with my rc before I buy other rc my next it going to D10 dragster .
Just got back from the traxxas store. Bought my daughter a trx4 kit because she kept wanting to drive my scx.
Fruity as hell!!
That intro though 😆
Should be no reason a 70T spur couldn't be used. As a maybe of fact, should be no reason (if building a speed-run car) the 55T spur couldn't be used. But, did general bashing, the 70T should work nicely. Right now, I'm running the stock gearing with the Velineon 3500kv...but, I'm about to upgrade even further - Castle Copperhead ESC, Tekin Pro4 HD 3500kv motor, and 70T spur. I'm currently undecided on the pinion undecided, but I'll be starting with the 18T.
As for the "stability problem" with the higher gearing, I don't think the real 'problem' was with the gearing...I'm thinking the real 'problem' is that there's a lot of 'play' where the suspension arms connect to the chassis, as well as where the C-hubs & rear carriers connect to the suspension arms. If you think about how disastrous that would be on a race buggy (which is going slower), just imagine how disastrous that is on a vehicle like this that's going faster.
Something I forgot to mention in my previous comment is that Richie (Driftomaniacs TH-cam channel) and I, each, have 4Tec 3.0s running the Velineon 3S system...but, we've also give in 50-50 on a third 4Tec 3.0, which we'll be converting into a speed run car running...you guesses it...55T/35T gearing (unless we can get the 55T/34T gearing to fit).
I like that corvette body did your wife build that truck you got her
Hey I have been watching your channel over a year now I used loved play rc when I were kid my 1st rc were duke of Hazzard car that back up turn front wheel Everytime and some how I did something to that make that car fly fast hallway at deaf school drom cause I added 4x 8v batteries so I went awe aww that really freaking cool but it didn't burn or fire electronic in charger but I crashed into the wall shattered Dodge Charger rt and I still has the body of the Charger's top of rebel flag and right door what left of it after shattered into wall I got hugh trouble when my supervisor heard crash like firework I got suspended for a week in dorm, but it were my best memories of my 1st rc.
I'm running the 55 and 35 on my 2.0🤦♂️😂
Can I buy one of your trucks please.
Love to buy one from you
love it
i put 6s into my 4tec 3.0 with Tsm i made a small video on my channel
I have 55/35 on my 2.0
Thats what i had on my 2.0... with the right body it would drive just fine.
Nice
The hot rod is longer than the corvette by just a smidge
Hello
The revo
Always something hu? I feel ya
If your giving any cars away I would give one a good home
I really need some new cars... Lol...
For a car that looks so great the speed and performance is a real let down. :( I'm going to wait for the faster version there's no way they won't release one I feel. The body and chassis look amazing.
I cant disagree it was not easy to drive with the VXL and high speed gearing. I bet TSM helps a lot.
Can’t believe you didn’t purchase 2 vettes....lol
maybe cause i did... smh... hahaha
@@MarkSantaMaria I knew it 😂
RRWN😂👍🏽
🔥😍👍
I'll take some of your stuff if you want rid of it
عرضك جميل يا ليتك تتكلم العربية حتى أفهمك عزيزي 😔
Oh by the way I m deaf hard hearing kind of one ear
First
Who’s first?! ;)
You the man
🥳
I'm glad to hear you say giveaway and turns like that cuz a lot of these TH-camrs don't but I bought a few cars here recently dr10 just are exceed and now I just purchased that low cb100 I believe Camaro if you give me some stuff away that's great I hope I can receive something but if not send me a list of anything or potentially selling that would help support the channel and make you one of my favorite TH-cam Stars thanks a lot love your show
You need a real vette .
Pick me
You can give me something I'm poor