It's been a very long time since I've seen a decent 61 Dodge two door Phoenix or Polara. Over time, they've become a car I shoulda', woulda', coulda' sought out as their body lines appeal to me greatly. Thanks for giving this particular Mopar a well done video...complete with the realities of bustin' knuckes and fingertips.
The injury to Jamie's digits is what kept me from getting serious about auto mechanics. I had done some repairs to brakes and shocks in my time so long ago, but wrenching on an engine was something I steered clear of as I was too much a 'sissy' I'll admit when it comes to pain.
The outboard taillights are kinda nifty in my opinion. Also, that dash with the "wingtips" below the speedo are really odd, yet so fitting on that car.
They were so ugly that they got Virgil Exner fired. Elwood Engel was hired from Ford to replace him. The Phoenix convertible has added tail lights after the original ones were almost invisible to following drivers causing a number of rear end collisions.
Stuck at work on Saturday morning, what better way to start the day! Commenting before I even watch the whole video, just going to assume cool shit happens.
Big fan of Virgil Exner's designed cars, love the fin designs, especially the 61' Plymouth Fury. My 64' Dodge 880 has got the 361 also, damn good motors. Appreciate the look at the Early C body Dodges, from my view, a rare platform to come across at local events/shows.
@@peterruddick1952 I apologize & I stand corrected, indeed 1960, I suppose the various vids I watched on it were mere typos and the like. Calling it 61' instead of 60'
Thanks for helping me ID a car! There is one of these at a local junkyard thats actually a police car...still has all the "Police package" parts on it black with white doors...and its super solid...been thinking about brining it home.
Owned a 61Dodge Polara Convertible 383. Bought it from a woman (in 1968) who had upgraded to A Monaco. About the only thing that car couldn't pass was a gas station. The car was in great shape, and I gave the woman $300 for it. The last hundred was a coffee can full of change. It had thirty-seven + thousand miles on the odometer, and although the car was a convertible, it had an air conditioner. Chrysler was one of the few car companies (maybe the only one) which made their own air-conditioning systems. BTW Chrysler's "downsizing" of the early Sixties (64. 65, 66 was short lived. The 68 Monaco was huge, as were the early Seventies high-end models. Thanks for the vid and the memories. Wish I'd kept that car. Hope you get yours running!!
The downsizing came in ‘62 for Dodge and Plymouth. Dodge almost immediately got the 880, a recycled Chrysler body with a Dodge nose, but Plymouth didn’t get a big car again until ‘65. That downsizing gave us the B body, which stuck around alongside those humongous boats and underpinned some great cars - like the Charger, Roadrunner, etc.
That’s so cool. There is a white ‘60 two door (Seneca with a post, I think) at the “Mopar Ranch” I featured in a video earlier this year. It’s really rough, but pretty awesome.
I think it's amazing how they paid attention to the detail and the style of vehicles back then cause all the lines and everything is what made em so unique in their own way..I don't think I could've ever came up with the ideas of how they wanted em to look back then cause I use to love drawing car's that just popped in my mind but none of the ideas I had came close to what the people that designed em came up with..Engine's that hasn't run in 4ever I always used 2 cycle gas to hopefully get em goin again cause I always thought it'd help lube the top of the pistons and cylinder walls. I've changed the oil out with not so expensive oil and I'd pull the distributor to pump the oil pressure up and hope they'd fire up lol..You gave it your best shot and banged your knuckles and fingers in the process, that's a plus and I figured it fire up but some of em will and some won't. It'd make a good project for someone that's 4sure cause I 4get about alot of vehicles that use to be on the roads in the 60s and 70s..
I hope you'll take care of this car even though its definitely a 'not for me' style. Most Mopars clicked in for me in 1964, and while I love nearly all the late 60s to 1973-76 (and a few after that), the fuselage Chryslers are my epitome of beautiful lines and elegance, but that '61 is cool in its weirdness and deserves to live and run again.
This one definitely isn’t in my sweet spot for style either, but I do like it a lot - and it’s super solid. It definitely deserves to live. My handle on FABO was “70sABodies” and that has always been my happy place. Obviously I love lots of B bodies as well - but my real interest has always been in that 64-76 range. I fell in love with the ‘55 Chrysler though. And I can find the appeal in these weird machines between those two points.
Kevin from Colorado here . I really appreciate you using the term engine when talking about engines , because they are engines ,the reason I'm sawing this is , when watching Jay Leno',s Garage , this is the one thing he always does is refer to engines as motors , I guess it might have something to do with being an fasteners, anyway that's the only thing I pick up from him I don't care about
I have a hard time getting upset with people using widely accepted colloquialisms. And I would be lying if I said I’d never referred to an engine as a motor.
I think those cars had two different quarter panel and taillight styles in 61 depending on the model. The frenched taillights on yours is indicative of a high trim level.
Yep - that rocket tail light is Polara only. The overall quarter design is very similar, if not actually the same. Apparently the trim is different though - the higher line Polara trim is more lines in it, or something.
@@DeadDodgeGarage The quarter maybe the same stamping but the Polara has the frenched in taillights while the lesser models have the taillights in the panel below the decklid.
Those cars are so homely they're cool. It's only been in recent years that I've come to appreciate them. I've never been a fan of the 361. 383's were being produced at this time and seemed to be a better engine...certainly more powerful. I never could figure out why Papa Chrysler wanted to produce a smaller version. Seems like it would have been cheaper to just do one. Anyway interesting. Id.
Right. And they kept that up for quite a while - my early production ‘66 Charger was among the last cars with a 361. They kept making them into the 70s for use in trucks. I have no idea why. Tom was sure this car would have a 383. He thought Polara was 383 only. Meanwhile, I had already looked at the ID pad and found the critical “36” designation.
@@DeadDodgeGarage The 318 (which replaces it) was a far better engine, and if you wanted to tweak it you could squeeze out 400 HP . The 361 was an outlier very few inferior Chrysler engines. (before the 1980's)
Glad to see someone young saving these old Chrysler products. the ones from the early 1960s kinda looked spooky cool definitely unique.keep up the great work I just subscribed 👍
That convertible's upper set of rear lights were a later fix of the lower sets placement. Mid-year if I remember correctly. They were set too low to be seen so the upper set were used. Those cars also used the 383 with 2-4 Ram Induction as an option. Think the 4-speed was available.
Interesting. I know dual quads were available on long rams. Apparently ten ‘61 Polaras were so equipped. If there was a four speed available it was some weird french thing. The Chrysler four speed was available starting in ‘64.
@DeadDodgeGarage Pont-A-Mousson, I believe, what it was called on the '61-'62 letter cars, it was French. Ram induction was where the 4bbls were hung over the valve covers. It was something to see! In '66 I saw a power blue '60 Dodge Phoenix convertible, white top, equipped with the ram setup. Always wondered what happened to it. White bucket interior too.
@DeadDodgeGarage it was the French tyranny used on, I believe, the only so-equipped letter car made in '60. It was hyped as the million $ car b/c only 1 was made.
You look like a guy a raced in 1987. His name was George and he had a ratty looking 68 Dart GT 340 automatic, 410 gears. I had a 69 big block Corvette, 4-speed, 410 gears. I only beat him by half a fender!That Dart was REALLY QUICK!made me a believer!😂
I support you and your quest for global dominance! My dad had a '60 Phoenix, and it was the first car that I there are pictures of me in it. I like their front end better than the '61, but to each their own.
‘60 definitely has a look to it. I dunno, I like straight and understated lines. Not that any other line but the grille on the ‘61 is straight or understated…haha.
Interesting that the dash on the convertible is identical to the 63 Dodge Custom 880. I had one of those in convertible form a long time ago. The interior was also red.
There’s a reason for that! And I’m guessing the reason is… they had them left over? I’m not sure actually. But along with the ‘61 Dodge nose, the mid year ‘62 880 also got the ‘61 Dodge dash. For whatever reason, the 880 stuck with that basic dash through ‘64, although the cluster was updated in ‘64. The 880 was built one more year - ‘65 - when it shared the dash as well as just about everything else with the full size Polara.
With regard to the paperwork problems, I hear that the so-called 'Vermont Loophole' is now closed, which sucks. I am sorry this one didn't pop off; I was rooting for you. Hopefully it has a future. I was really tempted by a C body last week (1970 Sport Fury). Need to stop looking at cars online.
Well now, I was put into the WayBack machine when you showed the 64 wagon, my uncle traded in his pride and joy 59 Buick Invicta convertible for a new wagon, cause kids.... remember riding in it on a 200 mile family reunion trip.
I have a video on reviving that car! It’s big block powered. Perfect period race car tow rig… it has been sold and is awaiting shipping. The last time I had it running, it allegedly puked gas everywhere and caught on fire - leading to at least one recurring joke found in this video.
@@DeadDodgeGarage I'll definitely find that video and watch it, don't know what engine was in my uncle's car, what impressed me was it was brand new and shiny, our family never had a new car...
I actually said that in a comment response to someone else earlier today. They had said that the Forward Look started in ‘55, and technically, they’re right, as that line was used in ads for ‘55. But the ‘55-56 cars were also known as the “Hundred Million Dollar Look,” or some other number of millions. I definitely think “Suddenly it’s 1960” plays into the “Forward Look” idea, and to me that family of whackier and whackier cars starts there, in ‘57.
Definitely some whacky looking vehicles from that time. My Dad was tool and die at Chryslers. Its all my parents owned. They even had a 69 cues with a 340 six pack. I remember getting rides to school with friends riding in some far out looking vehicles.
You should have pulled the valve covers- standard B engine Mopar, and checked for stuck valves - or did you individually check each cylinder for any compression ??
Neither of those operations is worth the time it takes in this case. Half of the valves could be stuck open and it wouldn’t do what this engine did. I’ve talked a lot about why I don’t do compression tests.
I appreciate you trying to save these cars 🚗 🙏 Absolutely 💯 love the Virgil Exner Era , Mopars . Never see these anymore . I would love too see you , resurrect this one from the , mechanically undead rhelm , And make it road worthy again
I had a 58 desoto with the 350 b block with the same issue. Only differnce was it would start fine when cold but if it was hot, I had to wait a couple hours. Finally locked it up after flooring down the freeway a few miles.
The exhaust manifold and tail pipes were not shielded from the starter. When the car ran for a time the starter would get hot and not perform. My Dad welded a little metal shield on the exhaust pipe and fixed the problem on our ‘58 New Yorker. In the early 1960s Chrysler shielded the starters and fixed the problem.
A great thing with old Mopars is pretty much ANY Mopar V8 starter from then until in the 80's or even the 90's will fit it so a replacement starter to get it going should not be a problem. I had a 60 Phoenix and currently have a smaller Dodge --- 63 Dodge 440 with the 318 Poly. A friend now has my old 60 Phoenix and also a 61.
My first car was a60 Plymouth Belvidere talk about dins,my friends called it the fish. But I had a good time in it it had a hugh trunk good for smuggling 4or 5 people in to the drivein theater 😅😅of course now I have to explain what that is, the old guys will understand.
Just a hunch but I have a 61 Phoenix and had the same problem with starting it and I'll explain. The car was running great when I bought it but it needed a good going thru. Tore the engine down so I could mask the engine compartment and paint the block and this is where the issue came up. The FACTORY manual for the timing sequence in 61 is incorrect! The picture of the numbers in the distributor are one off. Mind you I have the 318 poly with the distributor in the back of the engine so I'm not sure about your big block. How I found this out was I was thumbing online and found a Dodge truck manual from I think 64 and it still was using the poly 318 and not the LA 318 and a noticeable difference in the wiring schematic. Change the plug order on it ran like it did when I bought it which was flawless. Didn't see anymore vids on the car so I'm curious on what happened.
Interesting. I’m not sure on A/LA, but on big block, there is a slight difference in wire location for electronic ignition compared to points ignition. In any case, I ruled that out on this thing. Although I got the engine broken free and turning, I think a stuck ring or similar issue was keeping it from turning easily. I say that because I recently had a very similar issue on a 318 poly engine, and after removing the offending piston, the engine cranked over effortlessly. That was a new one for me.
To a certain degree, there is nothing original left. I’ve been a musician long enough to fully appreciate that we’re all standing on the shoulders of giants. No matter what I do, if I’m going to be “funny” and kind of a redneck with cars in videos… people are going to make the connection. Apparently. I hear it a lot less now, but it still happens. Someone just commented it today in fact - funny enough, it was on a video very unlike anything Derek does. Oh well, I guess.
I remember when I was a young boy thinking the 61 dodge was a ford, really different grille for a dodge at the time. But as I got older I came to love Virgil Exner's styling! 61 was a kinda strange styling year for the big 3, they were all kinda out of place and different compared to the year before and after.
Right. Much like early 50s cars - stuck between the tall, stodgy styling of the pre and immediately post war era, and the lower, longer cars that were to follow. I really love ‘55 Chryslers, and in my view the more Exner did from that point, the weirder it got - until the ship was finally righted with simplicity, conservative design, straight lines, and… honestly some boredom. Then ‘67-‘68 happened and everything was awesome for a bit there. Haha.
I used to watch Derek all the time, but I lost interest when he hit the Big Time and became commercialized. Don't get me wrong; I think it's great he's providing a good life for his family and all, but it's just not the same.
The show has definitely changed to a degree. Sometimes he’s still doing the same stuff. The guy has millions of followers… I just don’t have half a clue what happens when you get to that level.
@@DeadDodgeGarage At some point his vocabulary schtick started to get repetitious and old. And, he was not a "little guy" any more, if you know what I mean. Similar story with Cleetus. I don't watch either these days.
@@413x398 I'm at that point with VGG. It's not the same anymore and you know what he's going to do or say before he does it. Used to be must see, not it's if nothing else is available I'll half watch.
Something about this design, and the obscure variations of the models: Phoenix, Pioneer, Seneca?, Polara...did I get that right? This body style is oddly compelling, kind of a cross between a 59 or 60 Chev and a Old 300...very unusual. I would love to get one of the more stripped down mods like the Pioneer and put a 413 RB with TorqueFlight with plane Jane bench seat and column shift.
Yes, at least that many. There are so many models. Isn’t Dart on several of those as well? Like I think it’s a Dart Seneca, or something. Or is Dart another separate model? Don’t remember. Yes I really like the look of it, I think. I learned yesterday that there was a small number of Polaras made with cross rams as well. That’s just awesome.
@@DeadDodgeGarage And with the prices they are gettng for some of the Mopars finding one of these and making it you own seems like a cool less expensive project to me. I did see a Pioneer like this came u on Craigz by me last year, but I have another project already.
You can't win them all. You can get Vermont plates for it as long as it wasn't a salvage title. That reminds me i have to get the Vermont plates off of my New Yorker soon.
A valiant effort (pun intended) but it was probably junk before you ever laid a wrench on it. I'm a big Exner fan, especially the incredibly odd '61's. I haven't seen a can of Chrysler Heat Riser lube for years. I started using it as an all purpose penetrating oil in the 1970's and never came across a fastener it couldn't break loose. I called it "torch in a can", but it got so I couldn't find it at any MoPar dealer parts departments anymore about 20 years ago. In fact, the parts guy at my local dealer just flat GAVE me the last six cans of it that he had on the shelf back then and I think it was discontinued after that.
All the good stuff was… alas. It seems to work really well! Tom cleans out old dealerships across the country and has come across a good few cans. I like a lot of his designs - but things sure got weird. Haha.
Turns out my new 68 d300 needs another 225 slant. The one that's in there is a 1960 from a car. It was rebuilt and shows little wear inside . But the guy blew a head gasket and parked it for years. The rocker assembly looked like it was pulled from the ocean. The engine is locked up solid and 5 and 6 clyinder walls are rusted pretty deeply.. it seems not many people around Asheville rebuild motors any more. Do you know of any good engines for sale?
Good engines? No... I have one that did run and was much better than that in pieces with one damaged piston. My friend Allan has one that didn't run and apparently has a bent crank or something equally horrible.
I dunno, did you watch the video? I have since seen an engine with rusty gunk packed into the rings that did almost exactly what this one did. I suspect that is the actual issue causing it to be so difficult to rotate.
Yep! That is just exactly how I start up fire up Every single morning... A ton of race gas coffee then some starting fluid with something really super sweet and I just might start firing on all 8 cyl...
The Polara is pretty cool ,definitely worth saving ,cleaning the interior would make a big difference .
It's been a very long time since I've seen a decent 61 Dodge two door Phoenix or Polara. Over time, they've become a car I shoulda', woulda', coulda' sought out as their body lines appeal to me greatly. Thanks for giving this particular Mopar a well done video...complete with the realities of bustin' knuckes and fingertips.
The injury to Jamie's digits is what kept me from getting serious about auto mechanics. I had done some repairs to brakes and shocks in my time so long ago, but wrenching on an engine was something I steered clear of as I was too much a 'sissy' I'll admit when it comes to pain.
@@claztube blood sacrifices are just part of the gig. And they do make mechanics gloves these days that can help at least a little
@@claztube ouch !
These cars are gold, I've had several of these 1961 Dodges. These cars do catch the wind on very windy highways....
What a cool looking old car, it has style
The outboard taillights are kinda nifty in my opinion. Also, that dash with the "wingtips" below the speedo are really odd, yet so fitting on that car.
I love the tail lights! I agree, all of the quirky little design features make sense in that quirky of a car.
I love that speedo casing. Looks like 50’s-60’s horn rimmed sunglasses. Right on the nose!
Early 60s Mopars were pretty odd looking for the most part . This one is more cool than odd . Go for it !
Few survive . I think most people thought they were really ugly cars and they just all got scrapped.
I would most defin. go for it,
They were so ugly that they got Virgil Exner fired. Elwood Engel was hired from Ford to replace him. The Phoenix convertible has added tail lights after the original ones were almost invisible to following drivers causing a number of rear end collisions.
Stuck at work on Saturday morning, what better way to start the day! Commenting before I even watch the whole video, just going to assume cool shit happens.
Well, it’s definitely a roller coaster of emotion…
@@DeadDodgeGarage Well, you weren't wrong my friend.
I used to own a 1961 Dodge Polara. I loved that car.
"Bring the thunder!" Well, maybe, not. First time on your channel. I like it. I'll be back!
Not so much with the thunder around here… bring the failure? Haha. Thank you!
Nothing ventured, nothing gained. Thanks, enjoyed watching.
I love the 61 Polara! I own a former CHP version. These cars are super cool
That’s awesome!
You definitely not vice grip garage but that's not a bad thing. Keep being you doing your channel your way and real fans not haters will come.
Don’t mind if I do!
That car is awesome man.I love the whole design the rear tail lights.... the whole car..So cool.
That's right you are not Dereck but you are defiantly gifted,,Keep on doing what you do.
That looks like a good candidate for another project for Scott up there at Cold war motors 👍🤠
I was thinking the same thing!
I had a 1961 Pioneer, loved it. 225, 2dr post. Traded it in on a 65 Barracuda. Wish I had either one these days. Oh well. Enjoy watching.
Love the tail lights!
Big fan of Virgil Exner's designed cars, love the fin designs, especially the 61' Plymouth Fury.
My 64' Dodge 880 has got the 361 also, damn good motors.
Appreciate the look at the Early C body Dodges, from my view, a rare platform to come across at local events/shows.
'61 Fury fins ? U must mean '60
@@peterruddick1952 No sir, 1961 is the Fury with the MASSIVE tailfins near the rear, I may also add on, The 1960 Dodge matador is a sight to behold!
@@samhicks97 Suggest U look up '61 Fury, it has no fins
@@peterruddick1952 I apologize & I stand corrected, indeed 1960, I suppose the various vids I watched on it were mere typos and the like.
Calling it 61' instead of 60'
Worth restoring. Deserves a different engine if this one can't get freed up. Keep up the great work!
Gotta admire young mechanics with such patience, reminds me of myself 60 years ago... with Chevys
Thanks for helping me ID a car! There is one of these at a local junkyard thats actually a police car...still has all the "Police package" parts on it black with white doors...and its super solid...been thinking about brining it home.
Damn… that sounds amazing!! I would love to have one like that.
SAVE IT... Especially if it's an old police car as they are extremely rare and are very sought after.
@@todddenio3200 I would if. I had the room was up there to pick up an engine for my 62 chrysler 300 they only wanted $2500 for it
@@falconman9554 I'd love see see pics of that 61 police car.
@@rocketresto I did take pics of it but there on my phone.
that 61 Polara is gorgeous
Owned a 61Dodge Polara Convertible 383. Bought it from a woman (in 1968) who had upgraded to A Monaco. About the only thing that car couldn't pass was a gas station. The car was in great shape, and I gave the woman $300 for it. The last hundred was a coffee can full of change. It had thirty-seven + thousand miles on the odometer, and although the car was a convertible, it had an air conditioner. Chrysler was one of the few car companies (maybe the only one) which made their own air-conditioning systems.
BTW Chrysler's "downsizing" of the early Sixties (64. 65, 66 was short lived. The 68 Monaco was huge, as were the early Seventies high-end models.
Thanks for the vid and the memories. Wish I'd kept that car. Hope you get yours running!!
The downsizing came in ‘62 for Dodge and Plymouth. Dodge almost immediately got the 880, a recycled Chrysler body with a Dodge nose, but Plymouth didn’t get a big car again until ‘65. That downsizing gave us the B body, which stuck around alongside those humongous boats and underpinned some great cars - like the Charger, Roadrunner, etc.
Just found this channel, must say I would LOVE one of those car, especially the rocket one :)
My Grandfather, Ulysses Byrd, had a 1960 Phoenix 2dr htp. 361. I have a picture of it sitting in his driveway in Macon, Ga., covered with snow.
That’s so cool. There is a white ‘60 two door (Seneca with a post, I think) at the “Mopar Ranch” I featured in a video earlier this year. It’s really rough, but pretty awesome.
Oh man -- I love these! Favorite Exner era car. I can't recall the last time I saw a reasonably priced '61 Polara 2 door for sale.
I have a 58 Coronet that ran after 30 years in a junkyard, now I'm a Forward Look fanatic. Sometimes they pop off, sometimes there is no hope.
That’s awesome! My experiences have been largely the former, but occasionally the latter - unfortunately.
I had a loaded '61 Polara wagon. Loved that car.
Still binge-watching. Lol got several hours in . I'm enjoying it immensely !!!!!! Cheers 🎉
Thanks Dave!
I think it's amazing how they paid attention to the detail and the style of vehicles back then cause all the lines and everything is what made em so unique in their own way..I don't think I could've ever came up with the ideas of how they wanted em to look back then cause I use to love drawing car's that just popped in my mind but none of the ideas I had came close to what the people that designed em came up with..Engine's that hasn't run in 4ever I always used 2 cycle gas to hopefully get em goin again cause I always thought it'd help lube the top of the pistons and cylinder walls. I've changed the oil out with not so expensive oil and I'd pull the distributor to pump the oil pressure up and hope they'd fire up lol..You gave it your best shot and banged your knuckles and fingers in the process, that's a plus and I figured it fire up but some of em will and some won't. It'd make a good project for someone that's 4sure cause I 4get about alot of vehicles that use to be on the roads in the 60s and 70s..
I owned a 61 Polara station wagon loaded..great auto........glad to see this car...
I hope you'll take care of this car even though its definitely a 'not for me' style. Most Mopars clicked in for me in 1964, and while I love nearly all the late 60s to 1973-76 (and a few after that), the fuselage Chryslers are my epitome of beautiful lines and elegance, but that '61 is cool in its weirdness and deserves to live and run again.
This one definitely isn’t in my sweet spot for style either, but I do like it a lot - and it’s super solid. It definitely deserves to live. My handle on FABO was “70sABodies” and that has always been my happy place. Obviously I love lots of B bodies as well - but my real interest has always been in that 64-76 range. I fell in love with the ‘55 Chrysler though. And I can find the appeal in these weird machines between those two points.
16:30 Owl around here. Probably not during the day but Turtle Dove sounds exactly the same. Do you have a Quaker or a Conure ?
Had two Conures. Unfortunately both have passed now. Liked one of them quite a bit. The other was a jerk.
@DeadDodgeGarage I heard it in background. ❤️
Just in time for my morning pot of coffee....... The entire pot!.... Am I too reliable? Predictable?..... Yeah
Sneeze......bless you.
Old Dodge had personality.
I loved this video. I was really rooting for it.
Kevin from Colorado here .
I really appreciate you using the term engine when talking about engines , because they are engines ,the reason I'm sawing this is , when watching Jay Leno',s Garage , this is the one thing he always does is refer to engines as motors , I guess it might have something to do with being an fasteners, anyway that's the only thing I pick up from him I don't care about
I have a hard time getting upset with people using widely accepted colloquialisms. And I would be lying if I said I’d never referred to an engine as a motor.
Love this Dodge!Its a BEAUTY!The "MUD" in the distributor cap is Bees or Wasp nests!
Yes I think I did say that. Whatever those little shits are called.
Valiant effort brother. Can't win them all
I think those cars had two different quarter panel and taillight styles in 61 depending on the model. The frenched taillights on yours is indicative of a high trim level.
Yep - that rocket tail light is Polara only. The overall quarter design is very similar, if not actually the same. Apparently the trim is different though - the higher line Polara trim is more lines in it, or something.
@@DeadDodgeGarage The quarter maybe the same stamping but the Polara has the frenched in taillights while the lesser models have the taillights in the panel below the decklid.
Those cars are so homely they're cool. It's only been in recent years that I've come to appreciate them. I've never been a fan of the 361. 383's were being produced at this time and seemed to be a better engine...certainly more powerful. I never could figure out why Papa Chrysler wanted to produce a smaller version. Seems like it would have been cheaper to just do one. Anyway interesting. Id.
Right. And they kept that up for quite a while - my early production ‘66 Charger was among the last cars with a 361. They kept making them into the 70s for use in trucks. I have no idea why. Tom was sure this car would have a 383. He thought Polara was 383 only. Meanwhile, I had already looked at the ID pad and found the critical “36” designation.
@@DeadDodgeGarage The 318 (which replaces it) was a far better engine, and if you wanted to tweak it you could squeeze out 400 HP . The 361 was an outlier very few inferior Chrysler engines. (before the 1980's)
@@DeadDodgeGarage I love em
I was going to score a 59 new Yorker I love to get a 60 dodge or a 59 DeSoto
In 1958, there was a 345 horsepower version of the 361.
The 318 came out in 57. It did not replace the 361, which came out in 58. There was a 345 horsepower version with dual quads.
A little 25-1 2 cycle gas does double duty. Lubes and seals rings temporarily
I love it We had that front end in 🇦🇺on our Dodge Phyixes
Glad to see someone young saving these old Chrysler products. the ones from the early 1960s kinda looked spooky cool definitely unique.keep up the great work I just subscribed 👍
Thank you!
As a welder for 44 years I can’t count how many times the cow hide has saved my fingers. When in doubt wear gloves.
I have real mechanic gloves in my toolbox… I just never use them. So there’s that.
Beautiful style, inside and out.
That convertible's upper set of rear lights were a later fix of the lower sets placement. Mid-year if I remember correctly. They were set too low to be seen so the upper set were used. Those cars also used the 383 with 2-4 Ram Induction as an option. Think the 4-speed was available.
Interesting. I know dual quads were available on long rams. Apparently ten ‘61 Polaras were so equipped. If there was a four speed available it was some weird french thing. The Chrysler four speed was available starting in ‘64.
@DeadDodgeGarage Pont-A-Mousson, I believe, what it was called on the '61-'62 letter cars, it was French. Ram induction was where the 4bbls were hung over the valve covers. It was something to see! In '66 I saw a power blue '60 Dodge Phoenix convertible, white top, equipped with the ram setup. Always wondered what happened to it. White bucket interior too.
@DeadDodgeGarage it was the French tyranny used on, I believe, the only so-equipped letter car made in '60. It was hyped as the million $ car b/c only 1 was made.
You look like a guy a raced in 1987. His name was George and he had a ratty looking 68 Dart GT 340 automatic, 410 gears. I had a 69 big block Corvette, 4-speed, 410 gears. I only beat him by half a fender!That Dart was REALLY QUICK!made me a believer!😂
That’s awesome. Haha. I wasn’t born until a few years after that. Maybe I am George’s spiritual successor.
Just found your video. Dude, awesome stuff. Keep up the good work. Who knows. 50 years from now, they maybe the only things on the road!
Very cool old rig man, nicely done!
That car is a beast please save it . 👍🏻🇦🇺💯⛽️
I am a little late to the party, but I think the '61 Polaras are DDG (drop dead gorgeous).
Well there is only one thing different between from those other cars starting and this one not. BEARD! The wisdom is on the salons floor lol.
Sheeeeeit. Yeah, you’re probably right actually.
@@DeadDodgeGarage love the channel. Thanks for dragging us on mopar adventures.
I support you and your quest for global dominance! My dad had a '60 Phoenix, and it was the first car that I there are pictures of me in it. I like their front end better than the '61, but to each their own.
‘60 definitely has a look to it. I dunno, I like straight and understated lines. Not that any other line but the grille on the ‘61 is straight or understated…haha.
Dude...that ragtop is KILLER. Too bad it doesn't have the cool rocket taillights.
Interesting that the dash on the convertible is identical to the 63 Dodge Custom 880. I had one of those in convertible form a long time ago. The interior was also red.
There’s a reason for that! And I’m guessing the reason is… they had them left over? I’m not sure actually. But along with the ‘61 Dodge nose, the mid year ‘62 880 also got the ‘61 Dodge dash. For whatever reason, the 880 stuck with that basic dash through ‘64, although the cluster was updated in ‘64. The 880 was built one more year - ‘65 - when it shared the dash as well as just about everything else with the full size Polara.
@@DeadDodgeGarage Not sure why they kept it that long. It was also used in the 61 DeSoto.
What a car,,,never saw one until this,,,tnx,,,land o' lakes,wi.
With regard to the paperwork problems, I hear that the so-called 'Vermont Loophole' is now closed, which sucks. I am sorry this one didn't pop off; I was rooting for you. Hopefully it has a future. I was really tempted by a C body last week (1970 Sport Fury). Need to stop looking at cars online.
Yes, really unfortunate. There are other states that still do that sort of thing. Man… I also want a 70 sport fury. It’s a problem.
Love these old amazing American beauties 🇺🇸
Well now, I was put into the WayBack machine when you showed the 64 wagon, my uncle traded in his pride and joy 59 Buick Invicta convertible for a new wagon, cause kids.... remember riding in it on a 200 mile family reunion trip.
I have a video on reviving that car! It’s big block powered. Perfect period race car tow rig… it has been sold and is awaiting shipping. The last time I had it running, it allegedly puked gas everywhere and caught on fire - leading to at least one recurring joke found in this video.
@@DeadDodgeGarage I'll definitely find that video and watch it, don't know what engine was in my uncle's car, what impressed me was it was brand new and shiny, our family never had a new car...
The tag for the '57 models was actually "Suddenly It's 1960."
I actually said that in a comment response to someone else earlier today. They had said that the Forward Look started in ‘55, and technically, they’re right, as that line was used in ads for ‘55. But the ‘55-56 cars were also known as the “Hundred Million Dollar Look,” or some other number of millions. I definitely think “Suddenly it’s 1960” plays into the “Forward Look” idea, and to me that family of whackier and whackier cars starts there, in ‘57.
Definitely some whacky looking vehicles from that time.
My Dad was tool and die at Chryslers.
Its all my parents owned.
They even had a 69 cues with a 340 six pack.
I remember getting rides to school with friends riding in some far out looking vehicles.
Sorry it's supposed to be cuda.
Another good one..well video that is
You should have pulled the valve covers- standard B engine Mopar, and checked for stuck valves - or did you individually check each cylinder for any compression ??
Neither of those operations is worth the time it takes in this case. Half of the valves could be stuck open and it wouldn’t do what this engine did. I’ve talked a lot about why I don’t do compression tests.
Love the early 60’s Mopars, we had a 4 door 63 Saratoga, beautiful car
Can’t go wrong with the Blues Brothers car
I appreciate you trying to save these cars 🚗 🙏
Absolutely 💯 love the
Virgil Exner Era , Mopars .
Never see these anymore .
I would love too see you ,
resurrect this one from the , mechanically undead rhelm ,
And make it road worthy again
I love that white Dodge I've never seen one
A 361..... I never knew of this displacement, as I often do; I learned something today from your video.... What is the HP on one of these....?
I had a 58 desoto with the 350 b block with the same issue. Only differnce was it would start fine when cold but if it was hot, I had to wait a couple hours. Finally locked it up after flooring down the freeway a few miles.
Oh wow. Impressive…
The exhaust manifold and tail pipes were not shielded from the starter. When the car ran for a time the starter would get hot and not perform. My Dad welded a little metal shield on the exhaust pipe and fixed the problem on our ‘58 New Yorker. In the early 1960s Chrysler shielded the starters and fixed the problem.
Those side -sweep tailights.......so cool.
New subscriber here. Great video. Please, you have to do the Blues Mobile. You are on a mission from God. I have been looking for one forever...lol
We’ve got a full tank of gas, half a pack of cigarettes, it’s dark, and we’re wearing sunglasses…
Had a super low mile 61 Phoenix, 2dr, white with blue interior. Wish I still had it.
Dang…
@@DeadDodgeGarage Yeah, rust free.
A great thing with old Mopars is pretty much ANY Mopar V8 starter from then until in the 80's or even the 90's will fit it so a replacement starter to get it going should not be a problem. I had a 60 Phoenix and currently have a smaller Dodge --- 63 Dodge 440 with the 318 Poly. A friend now has my old 60 Phoenix and also a 61.
Unfortunately that is not the case with these early direct drive starters… trust me, I’m hip to the starter interchange.
My first car was a60 Plymouth Belvidere talk about dins,my friends called it the fish. But I had a good time in it it had a hugh trunk good for smuggling 4or 5 people in to the drivein theater 😅😅of course now I have to explain what that is, the old guys will understand.
Haaaahaha. I do know what a drive in is luckily. There is one about 40 minutes from here which I should probably go to some day.
That car is actually pretty cool and would make a nice cruiser so I hope it gets a shot at a new life...
My dad had a 64 Polara, was a cool car.
I’d really like one some day.
Another great video
It deserves to run the roads again
Just a hunch but I have a 61 Phoenix and had the same problem with starting it and I'll explain. The car was running great when I bought it but it needed a good going thru. Tore the engine down so I could mask the engine compartment and paint the block and this is where the issue came up. The FACTORY manual for the timing sequence in 61 is incorrect! The picture of the numbers in the distributor are one off. Mind you I have the 318 poly with the distributor in the back of the engine so I'm not sure about your big block. How I found this out was I was thumbing online and found a Dodge truck manual from I think 64 and it still was using the poly 318 and not the LA 318 and a noticeable difference in the wiring schematic. Change the plug order on it ran like it did when I bought it which was flawless. Didn't see anymore vids on the car so I'm curious on what happened.
Interesting. I’m not sure on A/LA, but on big block, there is a slight difference in wire location for electronic ignition compared to points ignition. In any case, I ruled that out on this thing. Although I got the engine broken free and turning, I think a stuck ring or similar issue was keeping it from turning easily. I say that because I recently had a very similar issue on a 318 poly engine, and after removing the offending piston, the engine cranked over effortlessly. That was a new one for me.
@@DeadDodgeGarage Good luck to you on getting it running.
Vice Grip Garage borrows heavily from Chris Farley so who cares if you get called it, which Chris Farley borrowed heavily from John Belushi
To a certain degree, there is nothing original left. I’ve been a musician long enough to fully appreciate that we’re all standing on the shoulders of giants. No matter what I do, if I’m going to be “funny” and kind of a redneck with cars in videos… people are going to make the connection. Apparently. I hear it a lot less now, but it still happens. Someone just commented it today in fact - funny enough, it was on a video very unlike anything Derek does. Oh well, I guess.
Vice Grip funny? Who knew. Recently found this channel and find it incredibly refreshing. Not rehashing the same thing over and over.
I remember when I was a young boy thinking the 61 dodge was a ford, really different grille for a dodge at the time. But as I got older I came to love Virgil Exner's styling! 61 was a kinda strange styling year for the big 3, they were all kinda out of place and different compared to the year before and after.
Right. Much like early 50s cars - stuck between the tall, stodgy styling of the pre and immediately post war era, and the lower, longer cars that were to follow. I really love ‘55 Chryslers, and in my view the more Exner did from that point, the weirder it got - until the ship was finally righted with simplicity, conservative design, straight lines, and… honestly some boredom. Then ‘67-‘68 happened and everything was awesome for a bit there. Haha.
@@DeadDodgeGarage 👍
Lordy I do Love that body style!!!
I used to watch Derek all the time, but I lost interest when he hit the Big Time and became commercialized. Don't get me wrong; I think it's great he's providing a good life for his family and all, but it's just not the same.
The show has definitely changed to a degree. Sometimes he’s still doing the same stuff. The guy has millions of followers… I just don’t have half a clue what happens when you get to that level.
@@DeadDodgeGarage At some point his vocabulary schtick started to get repetitious and old. And, he was not a "little guy" any more, if you know what I mean. Similar story with Cleetus. I don't watch either these days.
@@413x398 I'm at that point with VGG. It's not the same anymore and you know what he's going to do or say before he does it. Used to be must see, not it's if nothing else is available I'll half watch.
Something about this design, and the obscure variations of the models: Phoenix, Pioneer, Seneca?, Polara...did I get that right? This body style is oddly compelling, kind of a cross between a 59 or 60 Chev and a Old 300...very unusual. I would love to get one of the more stripped down mods like the Pioneer and put a 413 RB with TorqueFlight with plane Jane bench seat and column shift.
Yes, at least that many. There are so many models. Isn’t Dart on several of those as well? Like I think it’s a Dart Seneca, or something. Or is Dart another separate model? Don’t remember. Yes I really like the look of it, I think. I learned yesterday that there was a small number of Polaras made with cross rams as well. That’s just awesome.
@@DeadDodgeGarage And with the prices they are gettng for some of the Mopars finding one of these and making it you own seems like a cool less expensive project to me. I did see a Pioneer like this came u on Craigz by me last year, but I have another project already.
My friend has a 426 4 speed 64 wagon one of 3 made it has 4600 original miles on it
These cars look so good
BLESS YOU😊
I’ve been waiting all day for someone to do that!
Beauty is in the eye of the beholder?😊
You can't win them all. You can get Vermont plates for it as long as it wasn't a salvage title. That reminds me i have to get the Vermont plates off of my New Yorker soon.
They just closed the Vermont loophole 😭 this car is missing the vin plate… that’s a horse of a different color.
A valiant effort (pun intended) but it was probably junk before you ever laid a wrench on it. I'm a big Exner fan, especially the incredibly odd '61's. I haven't seen a can of Chrysler Heat Riser lube for years. I started using it as an all purpose penetrating oil in the 1970's and never came across a fastener it couldn't break loose. I called it "torch in a can", but it got so I couldn't find it at any MoPar dealer parts departments anymore about 20 years ago. In fact, the parts guy at my local dealer just flat GAVE me the last six cans of it that he had on the shelf back then and I think it was discontinued after that.
All the good stuff was… alas. It seems to work really well! Tom cleans out old dealerships across the country and has come across a good few cans. I like a lot of his designs - but things sure got weird. Haha.
Turns out my new 68 d300 needs another 225 slant. The one that's in there is a 1960 from a car. It was rebuilt and shows little wear inside . But the guy blew a head gasket and parked it for years. The rocker assembly looked like it was pulled from the ocean. The engine is locked up solid and 5 and 6 clyinder walls are rusted pretty deeply.. it seems not many people around Asheville rebuild motors any more. Do you know of any good engines for sale?
Good engines? No... I have one that did run and was much better than that in pieces with one damaged piston. My friend Allan has one that didn't run and apparently has a bent crank or something equally horrible.
@@DeadDodgeGarage ok. Thank you! If I can't find a builder, it seems jasper sells them. I don't know what year cores they use, though.
That is a good looking Dodge!
I had a dodge seneca wagon in high school.lovedit
Did this thing run eventually? Its too good to part out!
No, but thankfully someone bought it with the intention of saving it.
Even if you spin a bearing it will start. Did you check for spark?
I dunno, did you watch the video? I have since seen an engine with rusty gunk packed into the rings that did almost exactly what this one did. I suspect that is the actual issue causing it to be so difficult to rotate.
Liked, first time viewers, Subscribed also
What I really enjoy is the factory installed sleeping quarters 🤠
I feel like I missed something important here. Lol.
that car is absolutely amazing!!!!!!!
Yep! That is just exactly how I start up fire up Every single morning... A ton of race gas coffee then some starting fluid with something really super sweet and I just might start firing on all 8 cyl...
Those are very cool cars. Very different. 😊😊