Mine failed last week. Far too complicated. I had a broken wire in the passenger side headlight. Absolute nightmare. Ford wanted £1200 for a headlight. I got mine fixed by an auto electrician for £100
Same issue I’ve had, pretty sure my connector isn’t connected tightly because I broke a clip notch on the headlight casing. The factory hid’s are pretty pricy, after my accident the repair shop couldn’t track down a new headlight and had to settle for a refurbished unit.
This videos very useful thanks. I’m having a issue with my Ford focus st and the cars at Ford and they cannot find the issue. They have had the car 6 hours and no luck. I’m getting the c1a03 error.
hi, thanks for the video. Just replaced my rear sensor, and am not getting 5v it reads 0V. Diagnostic scan shows 5v on the front one though..any ideas? Checked wires, look ok.
Have same error on my Focus mk3 2011. Also I see a condensation in my front right head light, and upper led light in it doesn't turn on when engine starts (only in evening, when low lights turn automatically) Any advice? Thanks
Wait what year is this? I have a short to ground error and replaced the sensor still got it but looking at the video it seems the leveling sensor has 3 wires coming from it where mine only has 2, wondering if a wire has become detached somewhere and that's throwing the fault code!
Mine failed last week. Far too complicated. I had a broken wire in the passenger side headlight. Absolute nightmare. Ford wanted £1200 for a headlight. I got mine fixed by an auto electrician for £100
Same issue I’ve had, pretty sure my connector isn’t connected tightly because I broke a clip notch on the headlight casing. The factory hid’s are pretty pricy, after my accident the repair shop couldn’t track down a new headlight and had to settle for a refurbished unit.
This videos very useful thanks. I’m having a issue with my Ford focus st and the cars at Ford and they cannot find the issue. They have had the car 6 hours and no luck. I’m getting the c1a03 error.
Glad you enjoyed the video, has the issue been resolved yet?
Ive got this same issue. Have you got a part number for the rear sensor ?
To calibrate the level you must have the car on level surface and have no one in the car 😂
hi, thanks for the video. Just replaced my rear sensor, and am not getting 5v it reads 0V. Diagnostic scan shows 5v on the front one though..any ideas? Checked wires, look ok.
Where are you based? have a similar issue with my preface lift ST3 and would like it resolved!
We are located in Bedfordshire, we typically book 1-2 weeks ahead.
@@EverydayGarageYT do you have contact details please?
@@styusuf5671 01525383000 if you give this number a ring, we are open 8:00-17:30 on weekdays and 9:00-13:00 on a Saturday.
Leighton Buzzard Lu7 4ff
@@EverydayGarageYTHi, my st has the same issue. Could you give me a price for the replacement harness please? Cheers
Have same error on my Focus mk3 2011. Also I see a condensation in my front right head light, and upper led light in it doesn't turn on when engine starts (only in evening, when low lights turn automatically)
Any advice? Thanks
Wait what year is this? I have a short to ground error and replaced the sensor still got it but looking at the video it seems the leveling sensor has 3 wires coming from it where mine only has 2, wondering if a wire has become detached somewhere and that's throwing the fault code!