Huina 1582 Unboxing (USA)
ฝัง
- เผยแพร่เมื่อ 6 พ.ค. 2021
- This vehicle was purchased from Xtreem RC;
Note; We had to wait almost Two full months to receive the vehicle.
I personally Don't Recommend going through Xtreem RC,🤔
And I Do Not Support Xtreme RC in any way, shape, or form,🤔
If you decide to go through Xtreme RC for anything, Then That is Your Responsibility Period.
I personally, Will Never do Business with Xtreem RC again.
👎☹️👎
Many Thanks for checking out the video,😊
As always, Questions and Comments are always welcome, But I Will Not Discuss anything else about Xtreem RC. 😊👍 - บันเทิง
very nice and detailed description of the vehicle. I have the same truck, but I did some optical tuning. Now I will try to change the tires and increase the angle of the container.
😊 "Optical Tuning" I like that one.😁👍
As for the lift angle improvement ❓🤔 I've got an idea, or Two, About how to increase the lift, Without losing any drop angle, "Drop angle" meaning still sitting level in the down position.😊👍
I could tell you my ideas for a cure, But I would rather save that one for a Future video.😄😂👍👍 lol
Tires; 🤔 Yes sir, The stock tires are a Serious drawback,🙄😕 along with the air-dam that hangs down on the front of the truck body,🤔
It needs "actual" rubber tires, A minor Fender trimming up front, and a possible fender relocation on the back axles, and then Different tires all the way around.😁👍
All else fails, you could also make some Custom Re'Treads for the stock tires,🤔 If you could find a off-road tire that was close to the same size as the stock tires, You might be able to stretch them over the top of the stock tires, 🤔 Kinda like putting on a pair of Socks,😁👍 lol
But you would probably have to do all of the previously mentioned body mods, in order to pull off that maneuver, 🤔😕
And I'm not sure if the front steering linkage setup would clear the prospect of Re'Treads,🤔 excess rubber hanging over the stock front tires, Might interfere with the steering link's,🤔❓ Which could possibly cause them Not to rotate,😕 And that would be no good.☹️
Suspension would make the truck better, But I think that better tires would be the Most Beneficial Upgrade that you could possibly do.😁👍
Other than making the entire truck 6-wheel drive of course.😂👍👍
Thanks for your Awesome Compliments & Comment, And many more thanks for checking out the video my friend.😊🤜🤛
Thank you and I look forward to your next films .have a good day😁🤗
😊👍
Brasil 🚛👍
😊👍🙏👉🏆
Good detail breakdown too sir!!
🙄 You know me, I don't know when to quit sometimes.😕😂👍
The battery deal was bothering me the most,😕
I stated on the Laegendary Tipper unboxing video, That the Huina Tipper ran on a 4v system,🙄 Which made me look like a total idiot when I discovered otherwise on this 1582 unboxing,😕 And it was all due to Xtreem RC's miss print on the 1582's spec's,🙄 And I felt a Extreme Need to Redeem my name for Xtreem RC's mistake.😁
All that aside, The 1582 is a pretty nice little truck,😊👍
The metal dump box is Killer! 😁 I would love to use that on a different truck, "6×6 preferably" 😂👍
It's going to be interesting seeing them try to move around while doing maintenance on the Adventure Park,😂 lol
I'm not planning on taking them through the course or anything, But I don't except them to do very well on flat ground either,🙄 I'm predicting that the sandy soil consistency is going to make moving around impossible without having a load on the vehicle,😕
But we'll see. 😁👍 ha ha ha lol
Thanks for your Awesome Comments, and for checking out the video my Brother.😁😊🤜🤛
@@R.C.A.D. As you may remember I have the same truck from WL. I have some video recorded but I don't even know if I'm showing anything. Looks like a kids toy in a f sand box..Has to have suspension to look alright and drive..
Yes sir, definitely needs suspension, and better tires, and 6-wheel drive too 😂👍
I had the Laegendary Tipper out this afternoon for a test run on Terra Firma, and it was Awful, 🤮 Couldn't go anywhere 🙄 I had to put a couple of large rocks in the bed, Just to get it to move. 😕 Talk about Worthless!
Modification is in it's future.
😁👍
Have this truck,does the job but needs a little suspension,would make big difference 👍
😁👍 Needs Suspension and Better tires 😄
The tires are Terrible! Borderline plastic 🙄
If it had some actual Rubber tires with some decent Tread, it would make all the Difference in the world.😁👍
I literally just came back inside from test driving my Laegendary Tipper, And it was Awful! ☹️ Wasn't going anywhere while out in the dirt, wouldn't even get out of it's own way,🙄 It was better after I put a few Rock's in the bed, But it was still pretty bad, And it was the tires fault.😕 I'm gonna have to come up with something different for them, Stock tires aren't getting it done.🤔
And I honestly can't imagine the Huina 1582 being any better,😕 I'm thinking that a Custom 6×6 Tipper is in the future 😄👍👍
Thanks for your Great Comment, and for taking the time to check out the video my Brother.😁🤜🤛
Anything you do to improve it i will be interested to see, and try and copy.😀
😄😁👍🤜🤛
Great review my friend. Which excavator would you recommend? I'm looking at a 1593 wonder if I should wait and maybe get the 580.
Thank you sir 😁👍
As for the Excavator ?
Hmm 🤔 that requires a little bit of thought 💭
As far as Huina Excavator's Go, The 1593 & 1580 are the Best one's straight out of the box, 🤔 and the 580 is far superior to the 1593,
Better than the wltoys Excavator as well,🤔 hmm
Ultimately, if you didn't mind waiting to save a little extra cabbage, I would definitely go with the 1580, 😕 At the end of the day, The 1580 has much more potential for growth,😊👍 Just because there is Several different manufacturer's who make a full Hydraulic Conversion for it,😊 So it has potential to be improved, beyond... already being Huina's Best Excavator. 😁👍
The 1593 on the other hand, Has very limited potential,
Certain things can be improved on the 1593 to make it a better machine than how it started,🤔
Such as relocating the secondary boom arm limiters, "So that you can get more curl out of the bucket" and Replacing the Stock plastic Track Drive units, with the metal 1580 Track Drive units, "for better durability" But it will never be as good as the 1580 😕
And for the money that it would take to get the 1593 up to the "out the door level" of the 1580, It would be Far... more cost effective to go with the 1580 to begin with.😁👍👍
And my answer is; 1580 all the way my friend.😊
Thanks for your Awesome Compliment & Question, and very much appreciated as always for checking out the video.😊🙏🤜🤛
I just acquired a huina excavator that looks exactly like yours , the only difference is that my bucket is plastic and the battery cover is also plastic. My question is, are those the only differences between the two or is the one that comes with the metal bucket stronger? Also are the two buckets interchangeable? Eventually id like to get the metal bucket and the metal battery cover for it.
Plastic Bucket !? 😕 Really ?
Wow! 🤔 My 1550 came with a plastic battery cover, But the bucket itself was metal.😕 It kinda sounds like you might have one of the "lesser" Huina excavator's,😕 I mean the 1550 is pretty basic, but Huina also makes a few excavator's that are even cheaper than the 1550,🤔
And you might just have one of those.😕
And as far as parts go...🤔
Hmm... Since I don't know exactly what machine you have, I can't exactly say what parts will fit and what won't.😕
As for the 1550 excavator;
The bucket from the 1550,1580,& 1593 are all interchangeable, "the 1580 bucket being the Best"
But unless you have aftermarket "Worm Gear Drivin Screw Servos" on your excavator I wouldn't bother switching to a metal bucket...😕
Really at the end of the day, it's much more cost effective to just start out with a new 1580 vs trying to build a lesser machine up to 1580 standards.🤔
What I'm trying to say is that it's cheaper to buy a brand new Huina 1580 vs trying to build up a smaller excavator.😕
Take my 1550 for example, I purchased that machine for $15.00 dollars, but it normally sells between $50.00-$150.00 dollars depending on where you look, And then I invested about 50-100 hours of building time into it, and around $250.00 dollars on top of the original purchase price, And it's still no where as good as a 1580,🤔😕 "not to mention that it's still not 100% right either" The Upgraded Motherboard that I put in my 1550, can't handle the 1580 track drive units that I installed into the machine,🤔😕 it lasts about an hour before the motherboard burns out from the stress of pushing the larger track drive motors,🙄☹️ Which means that I will have to upgrade to a 1580 Transmitter and Motherboard, in order for the excavator to be right.
🙄 And that's going to be a whole other nightmare entirely,😂 lol along with another $75.00 - $150.00 dollar investment for the part's,🙄😕 And after all that is done, that little 1550 excavator is going to cost me almost as much, as a Brand new Huina 1580.😕
Here's my suggestion for you brother.... Run your excavator for what it is... And if you really and "truly" enjoy playing with the excavator, Then save up your money and get a new Huina 1580 vs trying to build up the excavator that you currently have.🤔😉👍
It will be much more cost effective in the long run, And the machine is of much better Quality, all the way around.😉👍🤜🤛
@@R.C.A.D. thank you for taking the time to give me such extensive help . I took a long hard look at the box today and found that the model number is 1350 . From what i see it is the same exact thing as the 1550 except that its got a plastic bucket . I am eventually going to upgrade the mechanisms in the arm to those same servo motors as you have there. I know it might not be the smartest thing to do but this excavator was a gift from my wife and I don’t want her to feel bad for buying it for me so I’m gonna keep it and upgrade it so that it can dig without all the clicking lol. They should have made them with no clicking but with some kind of limit switch . I am happy with how it moves and how the track system has been working so i think its major flaw is the clicking clutches.
Build away Brother 😄👍
I just wanted to give you a heads up on the potential costs.😉👍
As for it being basically the same thing as a 1550... Cool!!!! 😁 That will make life a lot easier for parts shopping.😂 lol
As for the clutches; 🤔
I suppose that Huina was thinking "that better it slip then break" 😂 lol
After you build it up, switch out to the "worm gear screw servos" and get a metal bucket, It's going to be a little animal in the digging department.😉👍
Personally speaking...
My built up and "heavily weighted" 1550, Is a extremely compact and insanely capable digger,😊
Truth be told... If it had the 1580's style of transmitter, I would probably like my 1550 more than my 1580.😂 lol
Good luck on your build Brother, and let me know how it all works out for you.
😊👍🤜🤛
Do you plan to set up a public works company with all this? 😂 Come on, I'll give you the name of your company "R.C After Dark Ets and Company" 😄 Development works, earthworks, evacuation of rubble, route creation 🤣🤣
😁 Excellent, in any case it was a very good review and top explanations for this new truck 😉
😂👍👍 lol Yeah, we got a little out of control with the RC Construction Equipment, although? 🤔 I think that I need a good Bull Dozer to make the (Track Maintenance Division Collection) more complete.😁👍 lol their "Not for Hire"
Strictly RC Adventure Park track maintenance.😂 lol
Great idea though! 😊👍
Thanks for your Awesome Comment, and for checking out the video my Brother.
😊😁🤜🤛
@@R.C.A.D. It was my morning humor 😁 A buldozer would be really good, but at this size I don't know which model would be good.
😁 I enjoyed the morning humor 😂👍👍
As for the Dozer, I'm probably going to need, to make my own bull dozer,🤔
I might use a old vintage Tonka D-9 Bull Dozer that I have laying around for that project.😁👍
But ah! I've got a bunch of other stuff that needs to get taken care of first, So that project is sitting on the back burner for awhile.😊
@@R.C.A.D. 😁 We have so many projects in our heads, it's a real job to do the rc 😄 It's a great idea to use a Tonka, I'm sure this project will be great 😉
😂😉👍👍
This is pronounced "why not"-you figured that out Jim'O
😁👍 yes sir, I finally gave in to your wisdom Marcin.😊🤜🤛
@@R.C.A.D. Kept my waitnig a while haha :)
😄