วีดีโอ

😊🙏

😊👍

Hey what's up man... 😊 That's a no on the Stainless Hardware, I haven't seen it, and or "didn't know that it existed.😕 As far as the stock hardware; I've been running it for years now and haven't had any problems with it.😁 Just make sure to stay out of the Road Salt, or any snow that might be contaminated with road salt, and you should be okay.😊 And WD40 also works good as a after spray to keep everything clean.😁

Did you watch the entire video ? 😕 I'm sure that I mentioned it in there somewhere "considering that's what the video is kinda about in all" Not all of that lift is suspension related 😄 lol I've also got a custom body lift on it.😊

Yes sir... 😕 This is a RC Kit, Which means that it's not assembled, and that it comes with absolutely nothing but the basic vehicle, tires, and motor. Everything else needs to be purchased separately,🙄 Which would be a 2 to 4 or possibly even a 6 channel Transmitter & Receiver, along with One to Two Servo's for the front and possibly rear steering, along with a ESC or "Electronic Speed Controller" and a Battery for the vehicle. If you want a RC Vehicle that's Ready to go straight out of the box, then you need to look at RTR vehicles which stands for "Ready To Run" although most RTR vehicles don't come with a battery,😕 so you'll have to pay attention to the details when shopping.😊👍

I just checked out your channel "to see if you had anything that you were talking about pictured there" and I was surprised to see that you didn't,😕 but as an inventor I can understand why you wouldn't want people seeing new products and ideas, 🙄 Since the majority are out for themselves, and are always on the lookout for someone to step on, in order to get ahead in life.😕 And then the next thing that I was surprised about, Was that you weren't subscribed to my channel 😕 ? As far as seeing your collection; I've got two suggestions 😕 #1 You can try emailing them to me at the email address that's attached to my channel profile, (by clicking "View channel" and then clicking on, or scrolling over to my channel info, to see my Email address, "Which is something that I suggested on a previous comment a few weeks ago" #2 or the second suggestion for viewing your collection; Record a short video of your collection, and then Post it up on your TH-cam channel.😄👍

I've got a few that are ready to get uploaded "it's just a matter of going into town to upload them" 😊 As for why I haven't uploaded any lately; I've been busy making a Trail that goes all the way around the perimeter of our property "which is 10 acres of solid trees" 🙄 But it's almost done 😄 I've been working on it all week, "starting at 8am and finishing my work days at 10pm" the loop has basically been made, and now it's just a matter of smoothing everything out a bit more. But so far it's pretty darn Sweet.😊 Next video is going to be "The Mighty TF2 out on the adventure course" and that's going to be title as well. 😁

Right on and Congrats with the TF2 😊👍 As for the Orbs; I didn't really notice them on film until January of 2019 or 2020 🤔 But once I noticed them, I went back and started looking at my older videos, and seen that they are visible on just about every video I have, starting from the beginning, and leading up to today.😕 So to answer your question... they were here before the Snowman figure, And someone or "something" out of that group of orbs decided that they liked the snowman figure, and figured that they would stick around for awhile.🤔😕 Or at least that's what I was thinking. I think that something has been following me around since I was a wee kid, and I'm just now able to capture it on film with "today's HD style video cameras" or at least made them more visible to the naked eye.😕 Now having said that, I've never seen any with my own eyes before this, but I have had all kinds of haunted house experiences throughout my life, and I think that something has been following me from my Grandmother's house in Canada, since I was around 4 years old or so,🤔 I used to get a crazy bad headache that would make me sick to my stomach, everytime we went to visit her, and I mean every time, it was like clockwork, as soon as I got about 25ft from the front door, the headache would hit me like a ton of bricks, and then I would almost start throwing up immediately after.😕 Never the less, we only went there a few times when I was a child (maybe 10 times in total before they moved) But when I think back about everything, I think that the orbs "and whatever it is that's following me" probably started way back then.😕 I've also recently seen some weird looking stuff in the background of old family photos of myself 🤔 "childhood pictures from from the 70's and 80's" But what looks like orbs in the background of those old pictures, could just as likely be the old film degrading.😕 So who's to say on that observation 🙄 But my general consensus is that it's something, or a group of something's, that has been slowly building up since I was a kid.😕 I'm a magnet 🧲 for those things apparently.😕 Does it bother me ? no not really.... 😆 Lol Or maybe I just got used to it 🤔😕😄 lol

@@R.C.A.D. that’s very interesting to read . I used to get a feeling of somebody watching me and being near at my grandmothers house, just upstairs I think it was my grandfather who had passed away a few months earlier in 1976 . Not in the house but in a hospice so I think it was him just keeping an eye on me when I was alone . It’s a funny feeling you can’t explain . Also a few years ago I was in a place called Conwy castle in Wales in the Uk where I’m from . And just as I was climbing the steps to the battlements I noticed a pair of legs in chainmail with the armoured over shoes and shin plates I said to my wife can you see those legs and by time she looked they were gone . The castles were built by Edward longshanks king of England when he invaded Wales in 1400 he built a ring of Castles all around wales to keep the Welsh Down . Then the Rebellion of 1400 to 1415 saw some captured by rebels lead by Owain Glyndwr the prince of wales . So there’s a lot of history and death here in Wales so I think the legs were from that part in time I saw .

@craigpimlott204 Sorry for the delayed response Craig, it's been a busy couple of days. As far as your story goes; I hear you, and believe you 100% As for old King Edward; I heard of him being referred to as Long shank's in a movie, but I had no idea that's what he was actually referred by.😕 And that also brings up another question about what could be hanging around over here.🤔 My last name is "Campbell" And I am directly related to the same Campbell's of Breadalbane,😕 and "my Father, my older Brother, and myself" are the last three males on our side of the family tree.😕 Now if you think about all the past history between the Campbell's and the MacDonald's, not alone all the dirty work that they did for the King of England,🙄 makes me wonder if there could be some kind of connection from that past history in the family.🤔 ? "Which is just a thought that I've had for awhile, and you reminded me of it when you were talking about old Long Shanks.😊

@@R.C.A.D. yep old long shanks was a right old tyrant against the Scot’s and the Welsh he didnt treat The English great either . Taxed the English to death in some cases to pay for his Scottish and Welsh invasions and his ring of Castles around Wales to quell the Welsh uprising . Thing is he caused many centuries of animosity between the Scot’s and English and Welsh and English . But we all know he was the cause of it all these centuries later . same as the British in Ireland which was all started by William of orange . the animosity between the British and Irish is now hopefully sorting itself out because without those in power causing the problems ,we as everyday people can get along with each other without animosity non of us want to be at each others throats . Same with king George in America throwing his weight around without that nonsense folk would of got along just fine … 🇬🇧🇺🇸

@craigpimlott204 😊👍

😞 That Sucks... Sorry man I started out by myself too, "except with a RC4wd Trail Finder Two" and then a little while later I bought a Vaterra Twin Hammers 4×4 Buggy and started filming and driving two vehicles at the same time by myself,😕 And then I was forced to move back home from "financial difficulties" and now I drive with my brother and niece.😄 My finances and priorities still suck, but at least I've got people to crawl with. 😂 Ha ha ha lol Sorry man... And I hope that things turn around for you. 😊👍👉🏆

@@R.C.A.D. yeah but I found out I can lease one and I'm gonna get the high trail edition K10

Many Thanks for your kindness my friend.😊🙏 As for the Limiter Switches and Flashing Beacon; I haven't gotten that far yet myself 😄 lol "but it's on my list of stuff to do,👍 I've got the Aftermarket Medal Boom Arm's with the limiter switches, and I've had them sitting here since like 2019 or 2020 or something like that "I'm a little bit behind on things"😄 lol Anyways... It's on my list, and I'll try getting to it A.S.A.P. Thanks for your Awesome Compliments, and much appreciation for checking out the video.😊👍

😁🤜🤛👉🏆

​@R.C.A.D. tried to send links but they kept getting erased. Whole paragraphs of text, like an entire comment would just vanish

@younggrasshopper-apprentice Hmmm 🤔? Not sure what the deal is with that, but I apologize for it none the less.😕

Oh I hear ya there grasshopper, 😄 and yes sir I'm well aware of all the vehicles that share that gearbox,😁 even the old cheap radio shack two speed versions of that style transmission. That style of gearbox was used on a crap load of cheaper RC cars and buggies back in the 80's through the mid 90's. 😊 Online bidding war sites; TH-cam doesn't seem to like the word "E bay" I spaced it out so that they would let it slide,😄 lol I just say "online bidding war site" Anyways... I was looking last year for the diff gear and nobody had one, I found a crap ton of other useless stuff, and the only gears that I was able to find for this style gearbox was these aluminum ones.😊 But I appreciate you looking out... Many thanks grasshopper 😁🙏🤜🤛

Well the best way is to measure between the center of the front wheel stud to the center of the rear wheel stud, and that will give you your wheelbase,😊 but the easiest way is to look at your vehicle online "at say Amain hobbies" and see what the wheelbase is in the vehicle description.😂 Trx4 Blazer, Trx4 79 Bronco, and the trx4 sports have a 312mm wheelbase, The Trx4 defender has the longer wheelbase of 324mm, along with the newer style trx4 bronco, and a few others, and then the newer trx4 high trail pickups have a completely different wheelbase,🤔 I'm not sure what it is off the top of my head, but it's in between 312 and 324mm, Thanks Traxxas! 🙄

@@R.C.A.D. I put the shorter arms on my 21 bronco and every thing fit perfect. Either I got lucky or some one messed up on measurements.

@raidersperez1278 The 2021 Bronco has a 324 mm wheelbase, so...... Yeah......🤔 No matter how close it might look, you probably don't have it set up right.😕 "You basically just shortened your wheelbase" there's a fine line between 312mm and 324mm if you put them side by side it's barely noticeable, but there's definitely a difference between the two. Right now when you're suspension is fully extended your tires are probably coming close to the inner edges of the front and rear fenders, and with the 324mm setup it would be closer to the middle of the wheel well vs sitting slightly forward of center in the back and slightly backwards of center in the front,😕 You need to switch it over to the 324mm parts. The 312 setup will work, but it's not right for the wheelbase of your 2021 Bronco.😕

@@R.C.A.D. gawd damn it. I guess I will have to swap Over then. Thank you.

@raidersperez1278 No problem bro. 😊👍

Totally... If they still sell the car's, "then they need to keep an ample amount of spare parts available to the public.😕 Usually those Tamiya Hornet style gear boxes are pretty darn reliable, so I'd imagine under normal Ware and Tare conditions, that those gears would last twenty years plus without having any issues.🤔 And I pushed it too far with the VXL3s, my fault... But still, those gears should still be available for purchase "without having to buy an entire new vehicle" 😕 Nevertheless...😄 I'm crossing my fingers... but my thoughts are "that I'm probably going to break it again, but this time it will probably be the transmission housing, or the main chassis.😂 Lol When I get it back together, we can have the channel subs take bets on what part is going to break next. 😂 Ha ha ha lol

Your not kidding 😂 but I think with the right combination of tires,gears, and a longer wheelie bar, that we might be able to settle those horses down, or maybe not... Well see either way 😂 ha ha ha lol

Can't thank you enough Bro. 😊🙏🤜🤛

It was fun, but it would be even funnier if I could take off and land too, "I'm glad that I didn't pick a Jet for a first plane.😄 Lol Thanks for checking out the fun Daniel.😁👍

Thanks Doug.....😁🙏 And I think that I might need to find a different place to fly,🤔 That place was good and roomy, but it's not very forgiving for accidental landings, or accidentally getting too close to the ground.😄 lol I think that I was trying to fly it too slow, and it was pretty much dropping out of the sky,😕 and of course it was my first time flying to, so that may have been the main reason for most of my crashes, or mistakes.😄 Lol Ian's filming; That was a First for him too, "and unlike filming a crawler, the difficulty factor is quite a bit higher trying to film a plane, As you said, "they are very difficult to follow" 😕 especially when zooming in and out, while trying to track something through the sky.🙄 He didn't do too bad.😊 He did a lot better filming than I did flying, that's for sure.😂 Lol Practicing with the plane on the driveway; Now more than ever that's probably going to be needed,😆 "You should see the front wheel on the plane, it's sitting all kinds of sideways.😂 lol I glued the plane all back together "including around the front landing gear attachment point" with all of the landing gear removed,🙄 and when I put the landing gear back on after the glue was dry, I realized that the front wheel was looking a little jacked up.🙄 oops...😕 It will be fine for hand launching, but the landing's might be a little sketchy with that crooked front wheel.😂 Ha ha ha lol It's drivable, but it's going to take a little bit of compensating to keep it straight.😆 Lol Packing tape; Yeah man... I did a little bit of taping on it last night, "just to give it a bit more support"😁👍 Flying a model plane; Surprisingly difficult 😕 I need a plane with a Helicopter propeller on top, so that I can fly it a little bit slower.😂 Lol I was almost starting to panic when the plane started getting out of sight "I was having a tuff time with it's orientation, and trying to get it turned around and facing the right direction again,😕 That was almost a bit scary! And a little bit unnerving, to tell you the truth,🙄😕 Having all these thoughts about my plane going missing in a split second, while trying to get it turned around at the same time, was a bit of a rush! 😵 And that's where having a expert pilot by your side really pays off.😄 Lol I'm going to try flying it again next weekend if the weather is good, hopefully I can do a better job keeping it in the air, "landing is going to be whole other feet in itself,😄 Lol I've gotta get used to flying first, before I can even think about making a controlled landing on a designated strip.😂 Ha... I've got the itch, and I can't wait to go try flying it again.😁👍 And unlike my grandiose thoughts that I had in the beginning, of getting all these different types of planes before I even learned how to fly,🙄 I think that I learned, that I'm probably gonna have to go through a few Aeroscouts, before I can even think about getting something better.😂 Ha ha ha lol Thanks for your kind response towards my first Airplane video, and many more for taking the time to check it out "especially since it's not a crawler video" much appreciated for the support Brother. 😊👍🤜🤛🙏🛩️👉🏆

Well honestly for your first flights I was impressed. You recognized some of your mistakes and attempted to correct them. It's almost impossible to start alone. The 2 main things I noticed is trying to gain altitude without enough air speed and trying to turn with aileron without enough air speed. And no rudder compensation" Airspeed is your friend" lol The thing that sucks is you do not have anyone to trim the plane for you. If it was trimmed and flying level with your hands off the sticks. That would at least give you a fighting chance. Try to takeoff , climb to a comfortable altitude, stay at that height and then try to make wide circle's using rudder rather then ailerons to turn. That being said it really is darn near impossible to get it all correct when it's all new. Tips from others can help but ultimately you have to just experience it for yourself I think your location is good, not ideal but it looks safe. I've taught people using a 3 channel setup with ratcheting throttle. Your setup is fine just try to keep the three channel (concept) in your mind. Your goal is to get to a safe comfortable altitude and stay there (no up and down) and you want to use rudder rather then ailerons to keep your wings level while turning. This method helps a lot to avoid wallowing around the sky and avoiding tip stalls. PS I've seen guys flying for years that cannot hand launch that good lol your getting the hang of that👍 Have fun guys👍

@8bitisthesh1telwell74 Thanks for the Great Advice Doug...😁👍 I just read your message Three times, and I'm gonna have to read it once more "before I go fly the plane again" just to make sure I don't forget anything.😂👍

Me...😄 Ha lol What are you talking about Brother... I've seen your line of car's that go down the hall, you're RC collection has got to be just as big as mine if not bigger, I'm guessing it's bigger though.😄👍 Much appreciated for the awesome compliment Bro. 😁🙏🤜🤛

@@R.C.A.D. LOL Yours are way lot. Right now I have few.

Yeah man.... 3k on everything that I initially purchased for the TF2, They definitely see you coming with the scale accessories and other somewhat useless stuff.😂 If I had to do it all over again today, I could easily build my tf2 for less than 1k,🤔? Or maybe less than $1,200.00 bucks depending on what kind of Transmitter was chosen, but the truck itself can easily be built for less than 1k.😊👍

😄 ha no worries

And it looks even cooler on the technical stuff "in person" 😄 Ha ha ha lol It's definitely not a day to day crawler, "but for what it is" it doesn't do too bad around the washed out adventure course, and more importantly, it looks very Cool and Realistic while doing it.😊 Many thanks for checking out the show bro 😁🤜🤛

😦 hmm.. I don't know how to say this, other than to just say it, but I actively try not to watch other people's channels "specifically because I don't want to be influenced by their ideas" I like being original....😁👍 Now that being said... When I was learning about RC Airplane's over the past few months, "I've been doing just the opposite, and watching several other people's channels, But mainly Brian Phillips RC channel, he's kinda like me "as far as how he does his filming" except that he's very knowledgeable about Airplanes.😄 So there you go.... But when it comes to "Terra Firma" There's only a handful of channels that I'll check out from time to time, and those all belong to friends such as yourself.😁👍 But otherwise I actively try not to be influenced by other people's ideas.😕😊

The FMS One twelve scale, It's pretty slick. Has leaf springs 2, speed transmission

I'm checking that one out

Hmm 🤔? it's been awhile man .. but I think that was the general idea at the time. If I remember correctly, I was trying to get Xtra movement, without completely sacrificing the limiter feature.😕

@@R.C.A.D. thanks! Do you remember what you used to grind the contacter?

@BulletNE100 Ah man....😄 Knowing me I probably just took a little nip off the top of the button with a small pair of wire cutters or "side cutters" lol Like I said, usually I say exactly what I did during the video, 😕 and it's been a while since I've seen the video and done the work, so... You tell me 😄 did I forget to say anything about it in the video ? 😕

Will re-check. I'm also going to replace the lower chassis to get metal tracks. The chassis will be installed on the 1592 I also own

I finally received my 1593, and Huina removed the limiters that you grinded. I'm going to convert it to Hydraulic so I'll disassemble it then

It's because the majority of my views are still coming from people who are doing Internet searches on specific stuff vs getting views from channel subscribers.😕 Which is another reason why I got this truck vs something different, I was getting this one for me vs getting it for the channel. 😊

Possibly... But at the same time I haven't been too hard on it. It started making noise on it's first run in the snow,😕 "which is kinda ridiculous really" but now after it's first run in the dirt, it's Really starting to make some noises,😄 I'm going to run it until it breaks, and then I'm going to take it apart and see what it's made of, and then I'll probably put that jeep body on an entirely different chassis "Like a stretched out Ascender, or a Redcat Gen 8.😁👍

That's true but what happened to the loyal fifteen percent, Remember that little talk about those faithful %15

@kevinbreaker2683 Ha ... It's currently the loyal 16.? something.😄 I assume that they moved on to better channels during my past down time.🙄😆

Yeah not too bad all in all, "did pretty darn good for a scale model.😊 In hindsight "and as far as getting views go" I probably should have gotten a Gmade Spyder, or a Redcat Ascent,🤔 But I wasn't concerned about the views with this vehicle, this time I was getting a new RC that I've been wanting for a while, vs getting a new vehicle that the public wants to see.😁 It's certainly not the best crawler by any means, but it definitely looks great on film while it's trying.😄👍 Would I recommend it as someone's next RC ? 🤔 Definitely Not! 😕 There's no way that this thing would hold up to "day to day" use and abuse, It's a Cool looking truck with great overall curb appeal, "that looks awesome on camera" but it's definitely not built for daily driving.😄 Lol I myself on the other hand, am going to treat it like a daily drive, "just to see how long it will last for" and how much long term trail abuse that it can actually handle. 😁😂 Ha ha ha lol In other words "I'm going to find out what it's made of.😁👍

Agreed... Especially considering the type of vehicle it is.😄👍

I was surprised too 😄 it's gotta come down to the extra chassis weight from the driver and lead counter weight coupled with those narrow pizza cutter tires, that got it through most of the terrain,😄 Weight and Tire Side Bite for the dirt stuff, and Weight and Flat Tire Contact Patch for the double roller brick hill, 😁 Those tires performed pretty darn good across the board.😊

I ended up using some clear Shoe Goop 😁 and it's darn near invisible, you can't even tell that it's there.😊 But many thanks for your awesome suggestion brother, And many more for checking out show.😊🤜🤛

😊❤️🙏 Thanks man... And I seen a real one a few days ago, and your exactly right, you do sit up pretty high in it.😁

Thanks man...😊👍 It's not the best, but it's definitely better than no driver figure at all.😄 Lol And the more I look at it the better I feel about it,😕 I'm looking at the Jeep right now, and it actually doesn't look half bad,😊 maybe I did do a halfway decent job after all "for a Half Assed driver install" 😂 ha ha ha lol "get it... Half Assed... Because I had to shave off half of his butt to make him fit. 🤣🤣🤣🤣🤣 LMAO Half Assed install...😁 Lol I should have titled the video like that, "Roc Hobby 1:6 MB Scaler Half Assed driver install" 😆 both true and funny at the same time...😁

Many thanks man...😁🙏 It's far from perfect, but not too bad considering what I was working with, it was like trying to squeeze Andre the Giant into a old Manx Dune buggy, and making it look natural.😂 Tuff fit...🙄

@@R.C.A.D. There's no way I would have done all that work, with my patience I would have just been pissed off and drove it without the driver but lol you did a killer job making him not just fit but probably the most natural looking driver figure in one of these I have ever seen.

@creekcreeperrc7972 😄 Ha ha ha lol.. I'm not exactly known for my patience either, So I can relate with you there, but I was on a mission with this one, and was bound and determined to make that figure fit, "just like those special kids that we all knew in preschool" I was determined to get that square peg to fit into that round hole.😂 Ha ha ha lol Can't thank you enough for your seal of approval my friend, I certainly appreciate it... 😊❤️🙏🤜🤛

Much appreciated Kevin...😁👍 Personally though I wish that the army guy fit in there a little bit better,🤔 Roc hobby should have designed the Jeep around a figure like this, instead of making the vehicle, and crossing their fingers that a 1/6 figure would fit in it.😕 At the end of the day though, I don't think that a person could get one of these figures to fit in here any better than what I was able to do.😕 That was a tuff fit! 🙄 But still.... Doesn't look too bad after it was finished, he's sitting in there about as low as he can get.😊

It is just 2 companies making 2 different products. That's supposed to fit together and don't. Yeah I get it

Action figures are kind of crazy. If they have a big name attached to them old boy, Like Lee Marvin., He's three hundred bucks$300 ,, charles bronson, Three or four hundred bucks$300or 400 $so yeah 😵‍💫🙄😵‍💫😵‍💫they will not either

@kevinbreaker2683 Same thing for John J Rambo 🙄 stupid expensive! 😵

Heck yeah I remember ya, I never forget the great ones.😁👍 As far as "still uploading videos"..... I'm trying 😄 lol I was trying to stick to a 3 video upload per week kinda schedule, but man... that's a tuff schedule to maintain,🙄🥴 "talk about going around the clock,🙄 Three videos per week means absolutely zero free time,😕 which is kinda okay when you're going through your first few months of quitting cigarettes, but now it's starting to become tuff to maintain, This video is a good example, I probably should have taken a bit more time with it, instead of rushing through it, in order to stay on schedule with video uploads.🙄😕 Anyways.... I'm trying to find a happy medium 😄👍 Thanks for checking in my friend, and it was great hearing from you again. 😊🤜🤛

He's definitely feeling it, poor guy got mangled in the tour of duty.😞🙏 Ha ha ha 😂 Lol

Always.... That's what makes life more exciting... 😁👍 Different note; did you see all the orbs in this last video... those things were everywhere.😕

I have to be honest, you're making me just a little bit nervous. I was squirming in my seat.🫣😵‍💫

😁🙏 Thank you sir.... I don't think that the plane is receiving to many warm welcomes from my viewers, at least so far it's not 🙄 I try to be a little bit of everything RC, and not just crawlers, but you can't please everyone.😂 Lol F-em if they don't like the plane! I like it, and that's all that matters.😁😂 As far as Ohio; Turn it into a sheet of glass for all I care, worst darn state in the union I tell ya 😂 ha ha ha lol Best thing about Ohio is Cedar Point, but the lines are so ridiculously long, and the prices are so darn expensive, that I could care less if I ever went there again.🙄 Ohio Sucks! 😄 The Ohio residents are Cool, but the state itself Sucks Ohio! Hi in the middle and round on both ends O hi O "old bug's bunny joke" 😄 Lol Here's a funny fact... I live in northern Michigan but for some reason my phone thinks that I'm in Ohio 😕 no bull...🤔 I have no idea what the deal is with it, but for the last few months I've been getting nothing but Ohio News on my phones Google News app 😕 it's the weirdest darn thing, I've reset my phone several times over the past few weeks and no matter what I do it still thinks I'm in Ohio,🙄 I haven't been to Ohio in years, but for some darn reason my phone thinks that I'm in Cincinnati 😕 how messed up is that ? Anyways... Ohio! 😄 Lol Thanks for your kind words bro, and many more for checking out the new RC plane,😊 I haven't flown it yet, but I'm hoping to get it out soon,😁 "I'm actually pretty darn excited about it" my channel subs might not be, but I definitely am.😁👍

😁👍👉🏆

Me too 😄 ha ha ha lol As you know it's wall to wall trees around here, so I need to find a good place to fly it "that's not too far away, before hand.🙄😕 I've scoped out a few locations, and I think the best one for the "convenience factor" might be right across the street at the cemetery.😊 Will see...🤔😁👍 Thanks for checking out the video uncle Hans, and we look forward to seeing you guys.😊

😊😍😁 Very much appreciated for your support my friend, I honestly can't thank you enough for that awesome compliment, "It means a lot...😊 Many thanks Dalon.

😁👍 Thanks for the props Doug, As for the Jeep... You know me "I'm not a snowball artist" and I always try to show each vehicle for what it is "with no extra sugar coating"😊 The Jeep is a great vehicle and pretty darn fun to drive around, "as long as you don't exceed it's limits, and treat it for what it is" 😊 which once again "is kinda like a shelf model, that just happens to be equipped with a working drivetrain"😕 It's a real fun vehicle if your able to imagine yourself behind the whee,l and not exceed the vehicles limits. 😊👍 I like it... But it's definitely not a Trx4, or a SCX 10, or Gen 7 or 8, or an Ascender, or even a RC4wd product, Which is probably one of the most solid scale RC's made, "RC4wd vehicles are much more solid.😁 Nevertheless... The Roc Hobby Jeep is a Great looking scale vehicle, but it's definitely not a every day crawler.😄👍 Cotton Hills Time is on the way...😊 I did a driver figure install video on Friday morning 4/26/24, and then did a Run video later that day on the Adventure Course,😊 First run in the Dirt with the Jeep, and also "technically" the first run for the summer season.😁 And for a "scale model" she didn't do too bad,😊 it's still no where near everyday crawler capabilities, but it didn't do too bad for what it is.😄 I certainly had fun driving it none the less! 😊 It's limited off-road abilities and performance is half the fun when trying to negotiate obstacles.😁😄 Ha ha ha lol Once again "it's a fun little jeep for what it is.😊 And your right... It should come equipped with leaf springs 😕👍 Thanks again for your compliments, and many more for your indepth comment, "it says that you paid attention to the video" And I appreciate that... Thanks man.😊👍🤜🤛

Without sounding like too much of an idiot, What does "SAE" stand for 😕 ?

Yeah they definitely seem to be pretty popular on YT these days,😕 And they definitely need to work on a few more things too,🙄😄 Such as the Frame, Transmission, and Body Plastic,😕 and possibly Bearings too,🤔 I haven't taken it apart that far yet, but I'm almost wondering if this thing has Bushings all the way around vs Bearings, She was squeaking quite a bit towards the end of the run, and the Transmission seemed like it was making some noise as well,🤔😕 Hmm I might just have to do a video about that, "meaning tare it all down with the camera running, and decide later wether or not it's video worthy later" 😄 Lol Different note; I did a video about installing a Driver Figure inside the Jeep yesterday morning, and then did a First Run in the Dirt "out on the adventure course" right afterwards, or at least after I blew all the leaves off of the course,🙄 not to mention uploading this video yesterday as well,😄 ha lol yesterday was a long day, I pulled a all nighter on Thursday "working on last minute video edits for this video, and I worked right into Friday morning with editing, And then I got a bug up my rear end about taking the Jeep out on the adventure course, And remembered that I wanted to put a driver figure in it before the next video,🙄 So at around 7am I started doing a Driver install how to video "which was pretty extensive" and finished around 2pm, Then I looked at the Adventure Course and seen that it was Hammered Poo with fallen widow maker's and leaves,🙄😞 So at around 2:10pm I busted out my Bad A#$ 80cc two stroke Husqvarna backpack blower and went to work,😕 started at 2:10, finished at around 5:30 and went through a tank and a half of gas, which was about a gallon and a half, and then I took the Jeep out for an hour and a half on video, and then I went into town to upload this last video, and then I came home and had some dinner, and then after that I really can't remember,🤔😄lol I think that I fell asleep. "Yesterday and Thursday are kind of a blur,😕 Oh... And I Rolled the jeep over twice yesterday, and believe it or not the windshield is still attached.😂 Ha ha ha lol

Well if you got the tools and the Front Money, I've got a ton of billion dollar idea items,😕 no b.s. when it gets down to it at the end of the day "I'm an inventor above all else.😊 And not crappy ideas either,😕 I've got ideas for things that are cheap to produce, that are something that most of the population is going to need or use, and that can be sold for far far far above the production cost.😁 I've got ideas for everything from Hospital and medical supplies, to everyday household items, to pet related items to just about whatever you can think of that needs to be improved upon.😁 As far as ideas; I've got a bunch, and I'm always getting more, and I've had Three big ideas that have gotten away "from me talking to the wrong people" and those ideas are currently making somebody a crap ton of money.🤔😒 One was a Radio Controlled Rabbit decoy that I made for Coyote hunting back in 1997, My buddy borrowed it to try it out coyote hunting, and then said that he lost it from having the decoy in the bed of his truck and driving with his tailgate down on his way home,😧 I didn't believe him either 🤔 Worst darn excuse that I've ever heard, not to mention stupid! 🙄 I was infuriated 🤬 and never talked to that person again, but Ironically a few years after he lost the decoy, I was watching the history channel and just happened to see my exact Rabbit decoy being featured in a show titled "The History of Decoys" 😧 yup... My decoy! 🤬 The question then becomes "did my friend sell the decoy idea to someone, or did someone find what he supposedly lost ?🤔 I'm guessing that he sold the idea to someone, because it wasn't long after I stopped talking to him that he bought a new house and moved a few hours further away.😕 Sounds pretty guilty to me. 😕 Another idea was for a medical supply item that I happened to tell a home nurse that was helping me with a injury I sustained on the job at work,😕 never the less without spilling the beans on that entire idea and all of it's application's, part of it's application has been stolen, and is currently being mass produced, and sold to millions and millions of people.😕 Another idea was when spinning wheels were big, I had the idea for a spinning hup cap long before spinning hubcaps actually hit the market,😕 I told that idea to the wrong person at a invention submission corporation, and a few years later there they were for sale.😕 I currently have two ideas for the pet industry that will turn any person into a overnight billionaire, along with quite a few more ideas to perpetuate that same kind of income.😕😊 That's no bull man....😕 Unbeknownst to most people is that I'm a borderline genius and a inventor above all else.😊 Here's my problem.... I'm piss poor broke and always have been, and I need at least 100k to get things started, "it takes money to make money" and if you don't have money to start off with then your F-uc£ed !😕 And that's where I'm at,😞 I've got the Ideas, but I don't have the money to get any of them off the ground.😒