Only just found this. I built one of these years ago without attaching a ground or an antenna. I tested it and it was slowly accepting a charge. I thought good it worked and put in my draw and forgot about it. Months later I went to test it, It has continued to charge in my draw until the caps couldn't take any more and blown the caps. Thanks for sharing 👍🇬🇧
Try using germanium diodes instead of silicon. Germanium starts to conduct near 0.25 to 0.30 volts compared to 0.6volts for silicon diodes. That's more energy for your capacitor.
the free energy circuit is not doing the reception, it's the antenna. that circuit is just converting to dc and storing , it should be connected to the quartz instead of the antenna. The antenna should power the coil wrapped around the quartz
you take any piece of quartz drill two holes one at top one at bottom , wrap a copper coil around the crystal and solder the to ends to the leads that are in the two holes you drilled in the quartz earlier
@@selfawareness333 Free energy comes in the form of Analog, and "Analog is always in the shape of a sine wave and not like "Digital" as in square wave . Any conductor (Antenna) essentially is already receiving energy from cosmic background radiation that is in the form of Analog. This ac analog signal can be passed threw a rectifier and made dc
I realize people say this is not free energy because you are receiving radio waves from your local radio station, but radio waves do not extend into the ionosphere. the ionosphere has a high concentration of free electrons. You could attach a home made antenna to a balloon and try with a long piece of wire. not sure if that is at all possible just an idea
They are saying it's not free energy because technically speaking free energy means you are getting something, for nothing. I know for YOU that is free to you but the truth is that that still had to come from somewhere. I think it would better make sense what I am saying if you looked up "zero-sum" where it says that I can teach you what I know, that does not mean I no longer know it however if I give you $5 that means you gain $5 at the loss of my $5 which means we cancel each other out if you add them 5 + (-5) = 0 which gives you the "zero sum". So if you are following my this far basically "free energy" must not be "zero sum" which theoretically should be impossible. But that isn't to say that you get what you want and so what if somewhere else something is taken I mean theres ALOT of stuff its going to be a long time before we run out of anything so why not lol but yeah cool stuff if you really look into it
Yes. The higher up your antenna, the better the results.. When you put a conductor (antenna) in the atmosphere and ground it, there is a natural occurrence of alternating current. This is really easy to test. Just get a multi meter, go outside an put one lead into some wet ground, touch the other end to some ungrounded metal or just put it up in the air, like an antenna, you will get AC readings. The better the ground/antenna, the better results. Do this under a power pole and you will get really good results, because it will gain power from the surrounding electric field produced by the grid lines. However, this would technically be stealing power, because there is no meter to measure. Your typcial wall wort works the same way. There are coils inside, that are not touching each other. The grid ac flows through one coil, creating an electric field. The nearby coil picks up the electric field converts it into a lower voltage (depending on the coil config) and then it's rectified into dc power which is consumed by the device being powered.
@@surfdmountainCan we use the AC voltage between antenna and ground directly without using a rectifier? In your video you have a stable 6V AC . I don't know if this AC has the same frequency with light bulbs we have. I wonder if we could amplify this 6VAC to 110V or 220V?
Tesla writes in the Brooklyn Eagle newspaper on July 10th 1932: "I have harnessed the cosmic rays and caused them to operate a motive device... More than 25 years ago I began my efforts to harness the cosmic rays and I can now state that I have succeeded in operating a motive device by means of them. I will tell you in the most general way, the cosmic ray ionizes the air, setting free many charges ions and electrons. These charges are captured in a condenser which is made to discharge through the circuit of the motor. I have hopes of building my motor on a large scale, but circumstances have not been favorable to carrying out my plan".
i would hook the 7 volts as ac un rectified straight to a coil wrapped around a piece of quartz and then tap into the quartz for the free energy . The 7 volts is already in resonance with earth and so is the quartz , so you in effect can square your output because you are using two recievers instead of one . Antenna is one and quartz is two
On the circuit on the left, why did you connect the ground (Green terminal) to the antenna and vice versa? On the circuit diagram, there's an extra wire passing through the electrolytic capacitor which confuses me.
Hey. you had both of them wired in parallel draining one from the other. Its harder to charge both units that way. Its two loads you have there. Capacitors must be Low ESR!!!
Sir, would you please make some measurements for the current ( Amps / m Amps ) that you can get from each one alone of 2 circuits you made + the rectifier you have been used ! also the current withoutusingrectifier (AC voltage ) ! thank you
A cuantos volts deberian ser los capacitores ??? el sistema podra ser capaz de superar con el tiempo.. diagmos los 15 Volts de un capacitor comercial ??? o por ejemplo poner capacitores reciclados de fuente de pc ... 400 volts... y asi generar un poco mas de corriente ..... espero haberme dado a entender ... o usar el traductor automatico
I'm totally new to this and I am struggling a bit with the schematics. Would it be possible for you to post the schematics with the LED please? Thank you!
+enjoypolo I just updated the instructable with a circuit diagram including the led and switch. You can find the schematic here:www.instructables.com/id/Tesla-Free-Energy-Air-Circuit-Design-and-Testing/ Hope that helps.
surfdmountain I noticed you changed the direction of the diodes in the new schematics. This is something I was confused with in the beginning, could you explain why? Thank you :)
+enjoypolo Woops. I had made a mistake. The first diagrams were not correct. Thanks, I would have never noticed. I have replaced the diagrams with corrected versions: www.instructables.com/id/Tesla-Free-Energy-Air-Circuit-Design-and-Testing/ The diodes always point in the positive direction.
Nice demo I will do similar things and I whould add super capacitors(fast charging) and you picking up RF signal (AC) I think but doesn't matter it is free :)
So have you tried just grounding the coax cable on one side and using it as a capacitor and using a 5 amp choke or so in line with your circuit? Also couldn't you use some op amps where one board acts to run the op amps with the larger one running your op amps and should be able to run a 12v car led of 3 watts or better?
Note I tried this with a ceramic ear bud it buzzed being near the power line. It got a good voltage. But I think I was referring to my circuit solver app. You can stack circuits in parallel and series to get better results.
if I wanted to make a pocket cell phone charger cuz I get that little tiny circuit and just make a big antenna coil and a battery pack would that work and have the out be the end of a charger cord?
Easy answer. No. Radio wave harvesting produces just microamps. Most cellphones need around 500 milliamps and some will not start charging till you give it a full amp. There is simply not enough energy being produced. You could run a simply LCD clock, or even a super low power motor.
Yes. You can use a bare wire as an antenna (conductor). It will work. It won't pick up as much energy as a large antenna but it will work. If the wire is very long, it might work very well.
you need to buy a mini two coils that like a radio but not only that your picking up rays which there is radiation at 125ft but that because of the - ions your collecting . to multiply the energy.
Does anyone have an idea of a strong antenna that can produce 100 volts with this setup? Secondly, please OP, can you post the names of all the elements used fro this setup. Sorry, I'm a newbie to electronics/electrical.
Question, I have made the original circuit but am only getting around 45mv unless I am holding my antenna (steel wire wrapped in tin foil) but what was your ground wire connected to? I believe that my ground connection is not strong and that is my main problem!
your home earth system should not be connected to the ground, as its only there to trip your MCB if there is a fault. run your circuit ground direct to a copper pipe which is connected to the main water supply that way you use the entire city pipe system as your ground, change your antenna to something with a wider surface area like a metal shed roof....then upgrade your caps because you will be pulling in 100's of volts in stead of mv. if you study teslas work long enough you will see that he made allot of pointless gadgets...that is until you reverse the circuits, then there far from pointless....
All this circuit is doing is picking up radio waves. I saw years ago, and on, how to make a crystal diode radio with and I forget now the entire circuit, but it consisted of a crystal diode, an am antenna, just like you would find in an old am radio, which was a small coil rapped around a ferrite, how ever you spell it, and 1 or 2 caps which, with a speaker connected, what ever am radio station you could tune in could be heard.
Only just found this. I built one of these years ago without attaching a ground or an antenna. I tested it and it was slowly accepting a charge. I thought good it worked and put in my draw and forgot about it. Months later I went to test it, It has continued to charge in my draw until the caps couldn't take any more and blown the caps.
Thanks for sharing 👍🇬🇧
Try using germanium diodes instead of silicon. Germanium starts to conduct near 0.25 to 0.30 volts compared to 0.6volts for silicon diodes. That's more energy for your capacitor.
he uses 1N34A germanium diodes
the free energy circuit is not doing the reception, it's the antenna. that circuit is just converting to dc and storing , it should be connected to the quartz instead of the antenna. The antenna should power the coil wrapped around the quartz
any info where i can see how to build that quartz coil ?
you take any piece of quartz drill two holes one at top one at bottom , wrap a copper coil around the crystal and solder the to ends to the leads that are in the two holes you drilled in the quartz earlier
myke Does I’m having a hard time visualizing this. Can you refer me to a video?
@@selfawareness333 Free energy comes in the form of Analog, and "Analog is always in the shape of a sine wave and not like "Digital" as in square wave . Any conductor (Antenna) essentially is already receiving energy from cosmic background radiation that is in the form of Analog. This ac analog signal can be passed threw a rectifier and made dc
I realize people say this is not free energy because you are receiving radio waves from your local radio station, but radio waves do not extend into the ionosphere. the ionosphere has a high concentration of free electrons. You could attach a home made antenna to a balloon and try with a long piece of wire. not sure if that is at all possible just an idea
They are saying it's not free energy because technically speaking free energy means you are getting something, for nothing. I know for YOU that is free to you but the truth is that that still had to come from somewhere. I think it would better make sense what I am saying if you looked up "zero-sum" where it says that I can teach you what I know, that does not mean I no longer know it however if I give you $5 that means you gain $5 at the loss of my $5 which means we cancel each other out if you add them 5 + (-5) = 0 which gives you the "zero sum". So if you are following my this far basically "free energy" must not be "zero sum" which theoretically should be impossible. But that isn't to say that you get what you want and so what if somewhere else something is taken I mean theres ALOT of stuff its going to be a long time before we run out of anything so why not lol but yeah cool stuff if you really look into it
Free by our definition means not a human-generated source.
@@iwir3d Yes. I agree. It's not free energy really because it's being generated by something like a radio tower or a light ballast.
Yes. The higher up your antenna, the better the results.. When you put a conductor (antenna) in the atmosphere and ground it, there is a natural occurrence of alternating current. This is really easy to test. Just get a multi meter, go outside an put one lead into some wet ground, touch the other end to some ungrounded metal or just put it up in the air, like an antenna, you will get AC readings. The better the ground/antenna, the better results. Do this under a power pole and you will get really good results, because it will gain power from the surrounding electric field produced by the grid lines. However, this would technically be stealing power, because there is no meter to measure. Your typcial wall wort works the same way. There are coils inside, that are not touching each other. The grid ac flows through one coil, creating an electric field. The nearby coil picks up the electric field converts it into a lower voltage (depending on the coil config) and then it's rectified into dc power which is consumed by the device being powered.
@@surfdmountainCan we use the AC voltage between antenna and ground directly without using a rectifier? In your video you have a stable 6V AC . I don't know if this AC has the same frequency with light bulbs we have. I wonder if we could amplify this 6VAC to 110V or 220V?
Tesla writes in the Brooklyn Eagle newspaper on July 10th 1932: "I have harnessed the cosmic rays and caused them to operate a motive device... More than 25 years ago I began my efforts to harness the cosmic rays and I can now state that I have succeeded in operating a motive device by means of them. I will tell you in the most general way, the cosmic ray ionizes the air, setting free many charges ions and electrons. These charges are captured in a condenser which is made to discharge through the circuit of the motor. I have hopes of building my motor on a large scale, but circumstances have not been favorable to carrying out my plan".
Best video I’ve seen on this topic. Very easy to understand. Can you provide the link for the pre made rectifier
i would hook the 7 volts as ac un rectified straight to a coil wrapped around a piece of quartz and then tap into the quartz for the free energy . The 7 volts is already in resonance with earth and so is the quartz , so you in effect can square your output because you are using two recievers instead of one . Antenna is one and quartz is two
'\\ol''
did it supposed to connect the ground to a copper pipe deep?
looks like "Tate Ambient Power Module" circuit.
On the circuit on the left, why did you connect the ground (Green terminal) to the antenna and vice versa? On the circuit diagram, there's an extra wire passing through the electrolytic capacitor which confuses me.
Did you got a link to this small rectifier you showed al last ? thanks and best regards
can you use the rectifier to light up the led?
Hey. you had both of them wired in parallel draining one from the other. Its harder to charge both units that way. Its two loads you have there. Capacitors must be Low ESR!!!
Sir, would you please make some measurements for the current ( Amps / m Amps ) that you can get from each one alone of 2 circuits you made + the rectifier you have been used ! also the current withoutusingrectifier (AC voltage ) ! thank you
Gud day Sir..is it possible to charge a 12volt battery.? Where can I order that circuit system.?
A cuantos volts deberian ser los capacitores ???
el sistema podra ser capaz de superar con el tiempo.. diagmos los 15 Volts de un capacitor comercial ??? o por ejemplo poner capacitores reciclados de fuente de pc ... 400 volts... y asi generar un poco mas de corriente .....
espero haberme dado a entender ... o usar el traductor automatico
Why has no one used larger wire
I'm totally new to this and I am struggling a bit with the schematics. Would it be possible for you to post the schematics with the LED please? Thank you!
+enjoypolo I just updated the instructable with a circuit diagram including the led and switch. You can find the schematic here:www.instructables.com/id/Tesla-Free-Energy-Air-Circuit-Design-and-Testing/ Hope that helps.
Thank you so much! I will look into it ASAP.
surfdmountain I noticed you changed the direction of the diodes in the new schematics. This is something I was confused with in the beginning, could you explain why? Thank you :)
+enjoypolo Woops. I had made a mistake. The first diagrams were not correct. Thanks, I would have never noticed. I have replaced the diagrams with corrected versions: www.instructables.com/id/Tesla-Free-Energy-Air-Circuit-Design-and-Testing/ The diodes always point in the positive direction.
Nice demo I will do similar things and I whould add super capacitors(fast charging) and you picking up RF signal (AC) I think but doesn't matter it is free :)
So have you tried just grounding the coax cable on one side and using it as a capacitor and using a 5 amp choke or so in line with your circuit? Also couldn't you use some op amps where one board acts to run the op amps with the larger one running your op amps and should be able to run a 12v car led of 3 watts or better?
Note I tried this with a ceramic ear bud it buzzed being near the power line. It got a good voltage. But I think I was referring to my circuit solver app. You can stack circuits in parallel and series to get better results.
can you not just run the LED from the antenna AC?. I did and it keeps the LED illuminated continuously in its AC way.
The AC is going back and forth so it's blinking. It's blinking so fast you can't see it.
What's the serial number of the voltage rectifier?
Help!!!! my caps charged to 2-3V and died forever as it seems why would that be when they are 50V caps?
Where do you find your Germanium diodes?
My divice make 24-30 v in Capacitor but .007mA. !!!
if I wanted to make a pocket cell phone charger cuz I get that little tiny circuit and just make a big antenna coil and a battery pack would that work and have the out be the end of a charger cord?
Easy answer. No. Radio wave harvesting produces just microamps. Most cellphones need around 500 milliamps and some will not start charging till you give it a full amp. There is simply not enough energy being produced. You could run a simply LCD clock, or even a super low power motor.
Can anyone tell my what materials he used??
wher can i find a refractive antenna
Louise Brewer you can use any old antenna I’m pretty sure
Sir can you tell me what kind of antenna did you use I'm just curious whether it will work with just bare wire thank you sir I'm new to this thing
Yes. You can use a bare wire as an antenna (conductor). It will work. It won't pick up as much energy as a large antenna but it will work. If the wire is very long, it might work very well.
where did you get the mini rectifier compnet ? please pm me
etienne tucker look up it on eBay.
you need to buy a mini two coils that like a radio but not only that your picking up rays which there is radiation at 125ft but that because of the - ions your collecting . to multiply the energy.
build a battery powered tesla coil i want to build one to capture - ions being release from this no more generators that rotate .
I built a circuit like this years ago.
It had several stages.
It's flea power but it was enough to run a basic lcd wristwatch.
PLUS out and MINUS out???
Jason Nation the DC positive and negative output
Does anyone have an idea of a strong antenna that can produce 100 volts with this setup? Secondly, please OP, can you post the names of all the elements used fro this setup. Sorry, I'm a newbie to electronics/electrical.
Question, I have made the original circuit but am only getting around 45mv unless I am holding my antenna (steel wire wrapped in tin foil) but what was your ground wire connected to? I believe that my ground connection is not strong and that is my main problem!
the quartz power the house
your home earth system should not be connected to the ground, as its only there to trip your MCB if there is a fault. run your circuit ground direct to a copper pipe which is connected to the main water supply that way you use the entire city pipe system as your ground, change your antenna to something with a wider surface area like a metal shed roof....then upgrade your caps because you will be pulling in 100's of volts in stead of mv. if you study teslas work long enough you will see that he made allot of pointless gadgets...that is until you reverse the circuits, then there far from pointless....
So scale it so I can run my house. Oh, not scalable.
Oh shit, haha that was surprisingly funny
All this circuit is doing is picking up radio waves. I saw years ago, and on, how to make a crystal diode radio with and I forget now the entire circuit, but it consisted of a crystal diode, an am antenna, just like you would find in an old am radio, which was a small coil rapped around a ferrite, how ever you spell it, and 1 or 2 caps which, with a speaker connected, what ever am radio station you could tune in could be heard.
Faltou tradução.
old....
*Тесла свич на полевых транзисторах* th-cam.com/video/MnuD4kZ_6j0/w-d-xo.html