Duet Sport Whirlpool/ Kenmore/ Maytag Dryer Error code F 01
ฝัง
- เผยแพร่เมื่อ 20 ธ.ค. 2024
- Dryer not working , main control panel bad connection check control board. The dryer is 5 years old has been running good for a year and a half since fix.
Work on your dryer at your own risk. please know what you are doing.
UNPLUG DRYER WHILE WORKING ON IT.
update keep your dryer top surface clear of anything on top of it. This allows the heat not to be trapped between drum and dryer top which can heat up the control board.
Update I have noticed that if one keep setting on auto sensing as the dryer gets older the dryer can run far more longer than its suppose to thus overheating and making a high amount of heat thus connection gets burnt out. I use Timed drying to play it safe instead of Auto setting. My fix will be going on since October 2013
We received an F01 code on our duet dryer. Silly us thought we would call a service guy out who would solder it for us since we had no soldering experience. He came, never took a single panel off or unplugged the dryer. He turned on the dryer, received the F01 code, and he said it would be roughly $362 to repair it because it needed a new board. I told him no thanks, and he left with our $65 service call fee. My husband and I drove to town, bought a $10 soldering kit at Northern Tool, brought it home, sanded the spot, soldered it (again, neither of us have experience), put everything back together, and it worked perfectly. We had already taken the board out; however, we drove to town and back, soldered, and put everything back together in 40 minutes. $10 vs $362 vs new dryer. THANKS FOR THE VIDEO!! We are now subscribed.
Wow great story. I am glad you guys saved money and fixed the dryer. Thanks for watching and subscribing.
Your video was so helpful, I am not sure words will do justice. At home with three little ones, loads of laundry and no dryer. Panic set in. Thanks to your video, I was able to pull the dryer apart, repair and restart in an hour...by myself! Called for repair and was told I couldn't get a tech visit for 3 weeks! You saved the day Mr. Vassallo!!! :)
+Wendy Bulawa Agudelo Wow good for you Wendy! Thanks for watching.
+Wendy Bulawa Agudelo ...please subscribe
Our family dryer was giving this F 01 error yesterday. Because of your extremely helpful video our family has dry clothes again and I am a hero. Many Thanks.
+Hugh Jazz you are welcome thanks for watching.
+Hugh Jazz ...please subscribe
Our drier had the same problem... I youtubed the problem and saw this video. I followed all the steps shown in the video and FIXED my drier.. I was very thankful for seeing this video... The board is $364 and I fixed it for about $10... Thanks George! You the man!!!
Dan C Great ! Thanks for watching!
Same problem for me, same pin, same burn spot. Never had a successful solder before, but had an old iron and solder in the garage. This was the easiest solder to make. Plenty of room to work and didn't have to be precise. Worked like a charm. Thank you!
Glad the video helped. Thanks for watching please subscribe.
Wow, 6000+ views! You'd think there'd be a recall for this seemingly common problem. Fixing mine today, although there was no need to take anything but the lid off cause the board slid right out. Good attention to detail.
your welcome, thanks for watching.
+John Dickinson (Success With OG) ...please subscribe
+John Dickinson (Success With OG) ...please subscribe
If your ever in the bronx, we owe you a dinner, you saved us a lot of money. Thanks for taking the time to help others. Your a good man.
Your welcome, Thanks for watching! The comment you wrote made my day! I am so glad the video helped and saved you money!
Thank you for this fix. It took 1 hour to fix and you saved me at least $400 if I called a repair man. Works great. Your instructions were easy and exact. Thanks again
+Gary Curreri Thanks for watching.
+Gary Curreri ...please subscribe
It worked for us too! The whole family's just washed wet sheets into the dryer... NO DRYER... F0 1..! Many thanks!
+Cari Devine Bjelajac you are welcome!
+Cari Devine Bjelajac ...please subscribe
My Whirlpool Dryer just had the f-01 code and I looked for a video like yours as the last result. I couldn't believe I saw the same issue. I cleaned the area, applied flux and soldered with 6337 solder. The fix was a success saving two hundred dollars or an 80 dollar send out the board to be repaired. Thanks...
You are welcome thanks for watching please subscribe
My dryer went down on Memorial day 2015. My wife panicked so I went to You Tube and found your video. I did exactly what you said and it worked. My wife was so impressed because I can't fix anything! Thanks, you saved me serious cash $$$$$$$$$$
Frank Esposito You're welcome. Thanks for watching
+Frank Esposito ...please subscribe
Found this on you tube and thought I would check it out before I spent $300 for a service call/repair. This was exactly the issue and with my $11.00 solder kit fixed the problem as seen on this video. Couldn't believe it, thanks so much!!!
Your welcome. Thanks for watching!
We did this and our dryer is now working again!! Such a relief! We just had our washer and dryer both break down in August so I was not happy when our new (but gently used) dryer stopped working on Thursday. But we watched your video and did it all like you showed and it took about 40 minutes and now it is working. Thank you for sharing this trick. It was a life and money saver!
You are welcome thanks for watching please subscribe.
I did exactly what you did the only difference was that mine did not have a burned spot but you could clearly see where the solder on the same spot was missing. Thank you so much God know I couldn't afford to call a repair man!
Your welcome . Thanks for watching!
Wow . I had the circuit board replaced once under an extended warranty and now 2 years later it did the same thing. THIS WORKED ! Took all of about 20 minutes to repair. Thanks so much for the video !
+Herb Williams Great! Thanks for watching my fix lasting two years already.
+Herb Williams ...please subscribe
Amazing! Great instructions... did it this morning and saved a ton of money. 14,000+ views at this point. This interweb is an amazing thing - you are helping lots of people. Keith
Keith Pike your welcome thanks for watching.
THANK YOU!!! This worked! Thank you so much! Saved $323, the quote provided by Whirlpool. I am a female with manicured nails and typically not a do it yourself person. The most difficult part was disassembling the dryer and disconnecting the wires! THANK YOU so much for sharing your experience!
Wow good for you! I am so glad your fix worked out. Thanks for watching!
George Vassallo Hi George - I followed your video to the letter. My board didn't have an obvious burn mark like yours did. I found the solder you fixed your board on my board. My board's solder seems a bit worn down but not burned. Any chance it might be a different solder giving me the F-01 code? Any other suggestions from you or anybody else here would be really appreciated. Thanks
try re-soldering the connection.
Thank you, thank you, thank you....
I woke up at 5am to head out and buy a replacement dryer on this Black Friday after the required part was $300. I was researching the error code some more this morning and came across your video. $22 for a soder gun and 30 minutes of labor my dryer is working again.
+Bradley Cooper you are welcome , thanks for watching.
+Bradley Cooper ...please subscribe
We followed these instructions and fixed our dryer in no time. This saved us the cost of a new control board. Many thanks.
Melissa Lewallen u r very welcome! Thanks for watching!
George, you are my hero! I had the same error and same burned motherboard. I followed your video and made the repair in less than an hour. The repair only cost me $25 (had to buy a soldering iron and flux). I really appreciate you posting this video! Thank you!!!
John Grant your welcome! Thanks for watching.
You are awesome!!! My husband is not really a fix it type and our dryer just broke today. I googled this and was able to fix our dryer myself! Thank you!
Kendra Starks I am glad you fixed it Kendra! Thanks for watching.
Kendra Starks RockStar Mom! I am so happy that we did this today also!
+Kendra Starks ...please subscribe
George, thank you for the instructions. The repair worked for me on a Maytag Epic Z that was purchased in 2009 or so. The only concern was the solder would not spread very well. I did very lightly sand the connection and used rosen core solder.
You are welcome thanks for watching please subscribe.
Another satisfied viewer here ! Mine is the Kenmore Elite model. Board is in a different area in the top but there is no difference in removal. Wife was freaking out, because we just can't seem to catch a break financially these days. Well, sir, you gave us that. Thank you so very much!
Good for you! Thanks for watching!
George, you were right on the money! I had the same burn mark on the plastic housing and it was the same bad connection on the circuit board. A new board was $95. Thanks for your help.
You are welcome thanks for watching please subscribe
Thanks, you saved me having to buy a new dryer. I had the same bad solder joint on my dryer, so I followed your video and soldered the joint. Now the dryer is back to normal with no F01 fault.
You are welcome thanks for watching please subscribe
Ok! Wish me luck. Our 2009 maytag is the same as the duet. Burnt in exact same spot. Tomorrow I will attemt to fix this! If it works you have saved us hundreds. This wife doesnt care for a new dryer I want the money for new clothes.
Hope you can fix it? Thanks for watching please subscribe.
Thank you so much for posting this video....$20.00 for a soldering iron.....or Hundreds on a part....no brainer. worked great.
You are welcome thanks for watching please subscribe
Thank you..... just followed your instructions..... my dryer is now running...
+ali hersi you're welcome...thanks for watching.
+ali hersi ...please subscribe
thank you for the tutorial... took longer to heat up the soldering iron than it did to disassemble fix and reassemble. saved me over $300 thanks again
+honda4x4nut your are welcome thank for watching!
+honda4x4nut ...please subscribe
This video showed exactly what I found when I got everything opened up, did the repair as was described and was back up and running within an hour. Obviously saved myself hundreds of dollars. Thanks so much.
your welcome, Thanks for watching.
Holy crap! It worked. You saved me $106. No need to buy a new board.
Glad the video helped. Please subscribe.
Exact same problem paid 140 to be told I needed a new dryer,,,discovered this half hour and its working fingers crossed thankyou
Hope the fix works...........sorry about the $140. Please subscribe.
Dude, you saved me $300. my dryer was doing the same thing, I was about to order a control board when I saw this post. Checked the circuit board and mine looked just like yours. Soldered it, an hour later it's working perfect!
your welcome! thanks for watching!
+Sean Moore ...please subscribe
Good fix. My board had the same bad connection. After soldering and before putting back together I plan on cleaning all the lint and dust out which means more disassembly. The motor and sensors might be operating at the hot end because of all the dust and lint in it.
Thanks for watching. I just changed my thermostat no video. The dryer shuts down when cloths are dry now. Please subscribe.
Thank you so much my husband fixed our dryer in 15 min saved us over 600 dollars thanks so much
your welcome! thanks for watching!
Thank you for sharing. I was able to fix my circuit board today and the error F01 is no longer present and the dryer works. Amazing what a little solder will do. This saved me $$.
+Peter Geipel you are welcome, thanks for watching.
+Peter Geipel ...please subscribe
Thanks so much for the fix - save me $387! Seems like a design flaw that Whirlpool has to be aware of...probably programmed to blow out after a few years to keep us buying parts. Also have read that heat build up could contribute to it so we will also not be storing items on the top of the dryer anymore.
+Chad Miller update keep your dryer top surface clear of anything on top of it. This allows the heat not to be trapped between drum and dryer top which can heat up the control board.Update I have noticed that if one keep setting on auto sensing as the dryer gets older the dryer can run far more longer than its suppose to thus overheating and making a high amount of heat thus connection gets burnt out. I use Timed drying to play it safe instead of Auto setting. My fix will be going on since October 2013
+Chad Miller ...please subscribe
Yup my buddy's dryer is doing the same thing, He just came over to look on here and see if we could find a potential problem. Will let you know how it pans out. Thanks for the info man! Greatly appriecated.
Shane Charron Good luck hope this is the fix? Thanks for watching.
George, I must say thank you! My wife is shocked that I fixed the dryer for no cost! I have subscribed and appreciate your great TH-cam video. You have enabled us to cancel the service man and saved us at least $250.00, awesome!
Delaware Teacher I have to do a shout out to my wife and daughter...I have been replying to comment (your) welcome. they have pointed out to me (grammer police) it's you’re welcome! I am glad you fixed your dryer on your way to go DIYer and TH-camr!
Awesome write up..... repaired our dryer this evening. Thanks!
you are welcome thanks for watching...please subscribe.
this fixed our dryer as well. the relay lead burned out. simple solder job made it work again. saved 100 or so bucks with 20 min of effort.
you are welcome Elizabeth...please subscribe.
You just saved me $500 for a new dryer! Fixed it. Thanks for the video.
Nice work!
Fantastic!! I followed your steps and within a few minutes my dryer is fixed. Thank you for making this Awesome video.
+Kalikapersaud, Surendra you are welcome thanks for watching.
+Kalikapersaud, Surendra ...please subscribe
Wish us luck. We are about to attempt this. Been drying at the Laundromat for 2 months. FINGERS CROSSED!!!
+Troy Evens Good luck hope it worked!
+Troy Evens ...please subscribe
100% success on this repair on our dryer!! Thanks for the easy to understand instructions.
+m deerkop you are welcome thanks for watching.
+m deerkop ...please subscribe
Followed your instructions for my Maytag Epic Z Dryer (has the W10111606 part in it) - the F01 error is gone and everything works great! Thank you for saving me more than $200.00! God bless you!
Great...Thanks for watching!
Thank you so much for sharing this video George. Dryer coded last weekend and we pulled it apart today and your fix worked!!! You saved us a lot of shopping and a control board!
your welcome glad the video helped!
THANK YOU THANK YOU THANK YOU!!!! I just happened to google the model and make of my dryer and there was my F code and your video!! We (meaning my hubby on the tools and I on the laptop) opened it up and it was EXACT!! After running to town to buy a soldering wand and back again he had it fixed in minutes!!! YEAH!! Saved me over $180 to do it!! THANKS AGAIN--It really does work!!
your welcome...thank for watching!
OMG.
It was like a deja vu I watched the video then took the dryer apart and there it was
Took it to my buddy who has a solder iron and now it works. Great video and advice
+Jeff Pulis thank for watching.
+Jeff Pulis ...please subscribe
+George Vassallo ...please subscribe
Thanks a bunch for posting this. I was in a pinch for sure. I had the dryer loaded and another load in the wash. Works like a charm. Just hope it stays that way. Thanks again!!!
+Jason Phelps Thanks for watching. Mine still drying since October 2013.
+Jason Phelps ...please subscribe
I had the exact problem you described in your video. I fixed my dryer exactly as you suggested and the driver worked. Thank you so much you saved me at least 300.00. I'm very pleased with you help.
your welcome. Thanks for watching.
Thanks - worked great. I used cotton swab dipped in rubbing alcohol to clean the black carbon from the board and cover. Thought this might help prevent a repeat since the carbon is conductive.
Bernie Carrick your welcome! Thanks for watching.
Thanks you very much George. Came back from Toronto to Montréal at night my wife was waiting to get it fixed after she called Maytag service. Over the phone service said it was a fuse on our electric panel. When I reached home at 9h30pm and tried what service said. I look at your video and my wife was drying childrens clothes at 10h10pm. You save me time - money and I got an happy wife. Many thanks
+jrgrondin Alright good for you! Thanks for watching...please subscribe
+jrgrondin ...please subscribe
Just wanted to say thanks! I was ready to give up, kept looking at this video and decided I didn't have much to loose. After I took out the control board, It looked pretty bad. Then I read all your comments and figured I'd go for it. It worked!!
+DC07091 your welcome thanks for watching.
+DC07091 ...please subscribe
It works! Outstanding fix to the issue. I have never soldered, but did it today and the dryer is working. THANK YOU for taking the time to share!
Alright that's great! Thanks for watching!
Same exact issue and fixed in 20 minutes including a trip to the hardware store. Thanks so much for the video!
Your welcome! thanks for watching glad you fixed the dryer.
Just had this issue and this was the fix. 3 screws hold the top, 2 screws hold the board bracket. Solder as mentioned. Took me about 15 minutes tops.
Awesome... Did the whole procedure in about an hour and saved at least $100 ;-) Thankyou.
you are welcome Paul...please subcribe.
Thanks George this worked awesome and such an easy fix with a happy wife.Regards.
You are welcome thanks for watching please subscribe
Another satisfied viewer! Your video saved me. Really easy to follow and my dryer works again!
your welcome glad video helped. Thanks for watching.
Thank You for the video. Fixed my dryer this morning took less than 20 min.
+Ian O'Malley you are welcome thanks for watching.
+Ian O'Malley ...please subscribe
Great video. Had the F01 code. Took it apart and sure enough, it needed to be soldered. $26 for the soldering iron and solder versus $300 for the control board or $700 for a new dryer. Dryer is working and the repair took less than an hour.
David Luhr I am glad you fixed it! Thanks for watching.
I had the EXACT same problem with my Whirlpool Duet Dryer model # WED9200SQ0. Re-soldering it as you show fixed it. Thank you for posting.
Glad the video helped. Thanks for watching please subscribe.
You just saved me $250! Soldering that single post took all of 15 minutes and worked like a charm. If it blows again I'll just replace that component too.
Andrew Weiss You're welcome. Thanks for watching
+Andrew Weiss ...please subscribe
Wow, I am thrilled to say this worked for me too. Thank you SO MUCH for posting it in such detail. Figured I didn't have anything to lose, but I'm not sure I would have done it right without the great video. You're the man.
Thanks for watching glad the video helped! Good for you. I am glad you fixed your dryer on your own!
watched your video (on a Sunday when no parts were available) and fixed the dryer with no problem, worked great -- thanks
+dave holland you are welcome. Thanks for watching...please subscribe
George, they quoted me $500.00 to fix it. I did what you did in less than 45 minutes. Thanks!
Rick Charlebois u r welcome. Thanks for watching.
+Rick Charlebois ...please subscribe
Thank you .I found the problem with the help of this video. But the part are costly about $250 Then i tried to solder as one of the guy in this video suggested .Thank god it worked I solder it and it is working now( error code was F01)
+SIBY PAREKAT good for you! Thanks for watching.
had same problem f01 error on my maytag 3000 . also same burn out on the board. welded it back and it worked. Thanks saved 200 bucks on a new control board
+Polo Loo your are welcome thank for watching!
+Polo Loo ...please subscribe
Thanks. Did this fix. Worked great. No wonder they make so much money replacing the boards. I wold never have know if not for this. .
George - I don't ever do gofundme, yet you saved me money with this repair, and I love dogs. Hope your dog gets better!
you are welcome thanks for watching...please subscribe
Boxing day 2017. The dreaded F01 alarm appeared on my dryer. Thanks to the maker of this video it is back working in 2 hours. I spent most of that time tying to get the dryer vent reinstalled. Stuns me why I see 31 dislikes in the voting area. Do they dislike life in general? Great video!!!!!
You are welcome thanks for watching please subscribe
Thanks George from California your video did the trick. I appreciate you taking the time to make the video and saving me a lot of money.
Glad the video helped. Thanks for watching please subscribe.
Your video just saved me $300+...thank you!!!
Bobby Kemp Your welcome! Thanks for watching.
Problem was exactly as described. The repair worked like a charm only I used a brass wire brush for electrical connection cleaning & my Weller soldering gun. The connector on mine for the red & black power connections to the control board was very difficult to remove - afraid I would break something else trying to disconnect it but "gentle" perseverance pays off. The only down side to this repair was that the wife had her heart set on a new drier. She kept saying "let's go look for a new one" while I was affecting the repair...
+Barry Solomon Glad the video helped. Thanks for watching...Please subscribe
BOOOO YAAAAAAAAAH!!! OUTSTANDING!! My soldering is not the best, quite frankly it's rather ugly, but hey, IT WORKS!!!! Thanks for saving me $250.00. Merry Christmas. Mine looked exactly like yours!
Merry Christmas to you to! Glad you fixed it!
Awesome, followed your video, same problem, same exact spot. Now works like a charm. Thanks!!
CK CK your welcome! Thanks for watching.
Awesome! This worked like a charm.... I was a little sloppy on the soldering but it worked and saved me a ton-o-$!!
You are welcome thanks for watching please subscribe.
REPLY
Thanks George this worked beautifully not to mention saved me MONEY.
+Thomas Woodward you are welcome. Thanks for watching...please subscribe
Worked for me, on a Maytag 5000 .... exact same burnt! Thanks!!!!!!!!!!!!
+Erik Philippe I guess the Dryers are like the Computers. Apple and IBM only two kinds...thank for watching.
I had the same error code and when I got to the control board it had the same burn mark. Thank you sooo much for saving me money and frustration. Such a simple fix, but I wouldn't have thought of it! My dryer is 8 years old and this is the first problem I've had with it. thanks again!
+supplementDUDE you are welcome. Thanks for watching...please subscribe
Worked perfectly!you saved me a lot of money by posting this and it was a very simple fix- we really appreciate it, thank you.
+R Creech ...please subscribe
+R Creech ...please subscribe
Dryer went out Christmas Day 2014 :(. Dryer fixed December 26th!!! :D I love these TH-cam videos. I have fixed my Whirlpool Duet Washer 2x and my Dryer 1x with these Do-It (DUET....lol) YourSelf Videos!! Saved me $250+. My soldering was pretty ugly, but it was good enough to fix :D
+Callahan Baker ...please subscribe
Wow...thanks! Your video saved me lots of money! Cost me $15 at Ace Hardware to purchase a Soldering Iron and wire, my husband helped me with that. Other than that it was easy and I didn't have to go days without a dryer waiting on a service tech. I had a different model than shown but the problem was the same. Thanks again!
+Anne Foster you are welcome thanks for watching...please subscribe.Read more Show less Reply1
I just happend to look on here b4 I started shopping for a new dryer & I couldn't believe it! Thanks George! This really works!
Your welcome! I did the same thing when, I saw in fellow you tuber title read DO NOT BUY A CONTROL BOARD. spiro stats
Totally worked! Never done anything like this before but was totally easy. Thank you for saving me a ton of money!
Cindy Plumb Good for you! Thanks for watching!
Exact same symptom and hot spot. Fixed mine today. Thanks
Thanks for watching!
Worked like a champ. Pretty sure the manufacture and its supplier know this board is not very robust. It's good to know we now have options versus spending $200.00 to replace something that was of poor design and quality in the first place.2 minutes ago•
you are welcome. thanks for watching... please subscribe
Thank you for taking the time to share your knowledge. The world needs more people like you. Dryer fixed in 10 minutes, and now my GF has to make my sandwiches for the rest of the week on the bet she lost about this. Subscribed.
+rakkon1 thank you ...this made my day! thanks for watching
First attempt failed, only because I did a poor job soldering and after reading about 50 comments, I figured that I can't be the ONLY one that couldn't get it done. 2nd attempt worked like a charm, THANK YOU GEORGE, you're one cool dude in my book, wish I could give you Two Thumbs Up :-) PS subscribed!
you are welcome, thanks for watching and subscribing.
You daMan George...watched your video clip and did the exact same thing. Fix it...thank you George~
Michael G your welcome thanks for watching.
wanted to share my love for you as well. EXACT issue as your video ... same blown connection. after a $10 Walmart soldering iron, I'm BACK IN BUSINESS! MANY THANKS!
Donnie Brady your welcome! Thanks for watching.
Thank you. I did what you suggested and we are drying again!!!!
Matthew Miles you're welcome! Thanks for watching!
+Matthew Miles ...please subscribe
Worked on the Maytag epic z gas dryer. took me about 20 minutes to fix.
Thank you so much, you saved us some cash. Subscribed!!
You are welcome thanks for watching please subscribe
George , you have just save me a lot of money . thank you so much
Tam Nguyen your welcome! Thanks for watching.
+Tam Nguyen ...please subscribe
Thanks so much for posting this video! Just fixed my dryer!
good job thanks for watching
thank you so much! you just helped my family save $400! that was a quick and easy fix. I enjoyed the part where it took all three of us to do it together (dad, brother, and me). great family activity actually! :)
+Sandie Dai Great to hear! Thanks for watching...please subscribe
Hi George,
You just saved me $400 I was told by the Tech you need a new Mother Board, he told me its better to buy a New Dryer Yeh Right? I have limited skills with tech stuff Your video Help me out and Now its working fine went to ebay same Board $125.00 I guess everything these days is made to break with an average life of Five to Ten years then they want you to buy new again LOL the dryer is now Ten years old and is working great.
TH-cam everything Before you buy new THANK YOU THANK YOU THANK YOU
You are welcome thanks for watching please subscribe
Thanks. I had exactly the same problem. Must be some sort of design issue. You're video saved me quite a bit of money.
+Ed Wiley you are welcome thanks for watching...please subscribe.
Great help! Had it fixed in 40 minutes.
You are welcome thanks for watching please subscribe.