The awning was great for the range experience. David and Mike did a fantastic job treated us great. Thanks for the great time. The Daniels and Brights had a fantastic time
@@OffTheRanchhey Matt , if you measure a square from corner to corner it will be the same number on each corner if it is square . If it is a different measurement then move the one side until it is the same distance. Easy way to square something
When a good storm rolls in and the wind tears those grommets out, call Kraftsman Commercial Playgrounds & Waterparks. They can get you a thicker (blocks out more light) canopy with pockets sewn on all the edges for your cable to go through. I used to work for them. Good family owned business in Spring,Tx.
Skydive Desperado! Get the airstrip up and running and rent the plane! It would be perfect! Create a nice landing area for jumpers, covered packing areas, a nice covered hangout area for tandem and fun jumpers.
My oldest is 12 and ive been watching you forever . I love watching these kids grow up, its awesome seeing how us as dads will break the bank for our kids to learn and enjoy life
Matt do you plan to do a cement pad and put a tin roof on it sort of like gun clubs have, then you can put solar panels out there and have power for cameras and other stuff at ur big gatherings
Don't put mail in a mailbox. Thats actually a federal crime. It isn't often enforced, but you may get the one postal inspector with a wild hair up his ass.
Just a suggestion for when you inevitability climb back up to paint/cap the poles. Pour some concrete down em to absorb any moisture that got in there, let it set, cap it, and then weld on some collars to slide an oversized pipe down onto that can pivot and weld some pulleys to the pivot pipes. Then you can run the tension cables through the pulleys and down to ground level for retensioning or knockdown when/if the mesh needs repair or replacement.
Make sure to cap your poles. Will fill with water and rust out from the inside or will give your wasps and hornets a spot to place nests.. which won't be good later on. Also you should criss-cross the wire, corner to corner, to keep it from sagging in the middle. But I love it!!
I’d actually fill them with sand or gravel or dirt and cap the tops with foam or flexseal or the like. You want a “thud” rather than the hollow “ping” for a permanent vertical pipe.
@@T0X1C89 liability, not to mention most people staying at an airbnb dont want to hear cars ripping a drag strip all day/night. Id enjoy it but i can guarantee most would not
Since you asked the question.. Grenade comes from the French for pomegranate likely due to early versions resembling the fruit, the first recorded use was in 1536 during the siege of Arles, the word grenade comes from the Latin granatus meaning "filled with grain" My brain hurts when there's unanswered questions 🤷😅
The makers of that material have multiple variations on how much sun to block. My partners and I researched wind resistance on the different versions. Almost no difference. So if you want more shade, go for the 90% block. You’ll like it more. Also this is plastic coated filaments and yarn (yeah, I know) It will stretch quite a lot, especially under heat. We found that out the hard way.
if you want more shade, I suggest buying another canopy, identical in size and lay it on top of the one you already have. I have done that and it works perfectly. You can attach the top canopy to the bottom one with zip ties. Also think about hanging some 3 foot canopies along the back and sides to shield the sun coming in from the side. It will give you a larger shaded area directly under the roof canopy as the sun moves during the day or stays lower in the sky during winter months.
Matt put up a roofed structure that you can collect the water from to water the grassland you have there when the rain is scarce in the drier months of the year, you know you will eventually so do it from the start and make sure your regulars know as I am sure not having shade there is influencing their decisions to not come to your range at times, Flimsy shade cloth ain't going to cut it when your looking to build a professional reputation as a serious facility.
Build a lean-to for shooting benches on top of an old Class A chassis, make the cockpit like a boat helm. You can park it anywhere you want. Maybe build three. Look for Class A's with leveling systems. You could also slap an old party barge on top of a class A chassis, minus the pontoons of course.
26;45 You should loosen up the turn buckles a lot, then tighten the cables. That way, as it stretches, you'll be able to tighten the turn buckles for adjustment.
My dad owns the longest privately owned grass airstrip in Texas. It would be cool to have Matt as the challenger to it. He would have to make sure that it's definitely longer than half a mile.
You can camouflage netting to your screen and it'd help with the shade issue. There's usually some available from a surplus store that's not too expensive as an option.
I know it dosnt rain super tons there usually, but I'd definitely weld caps at the tops of the post being steel sunk in concrete with nowhere for water to go otherwise you'll be rusting those rather quickly inside. Otherwise a cool addition. Love how you love the wire as well.
Matt be careful about messing with curing concrete: 24 to 48 hours - after inital set, forms can be removed and people can walk on the surface 7 days - after partial curing, traffic from vehicles and equipment is okay 28 days - at this point, the concrete should be fully cured
To prevent debris from getting on top. Should have had the rear pipes about 2 feet higher so there would be an angle one the "roof". This would negate the need for a center post to prevent debris from collecting on top
That was a great day, Dave and Mikey were awesome and we all enjoyed the day a lot and it was great to meet you. Just have to correct and say we were from Scotland rather than Ireland. Same but different. 😂
The Saran shade cloth will shrink over time and what was ~65-70% shade cloth will deteriorate to closer to 50-55%. That shrinkage will then put more stress on the grommets. I agree with another comment that the carabiners are the way to go.
the best part of your videos is that you are actually there doing the work the whole time. its not just for the camera. much love and respect from a fellow Matt
A lot of canopy cover would be great, but I mean, A _LOT_ , layered like an outdoor ampitheater almost. angles of triangles/trapezoids to the ground will work great. It would feel like the old camp, but evolved big time. That... is just a tarp. lmao
MATT use carabiners the hook that shade screen onto the wire so you can slide it to one side and you can remove it easier because of you ever have to replace it you have to take the cable down
Spray paint your logo (or a sponsors logo) in the middle of your shade tarps. Then, when the sun shines through, you'd see it on the ground. You'd also catch it in drone shots
Concrete takes 28 days to fully cure. It will be "hard" in about 12 hours, but you want to give it at least a full day before putting any type of stress on it.
Exactly. Make a 44ft + 22ft + 49.2ft triangle from that rope and be done in 5 minutes, including spraying markers. Instead, they wasted 2+ hours on that aligning entirely useless batter boards with triangle rulers comedy, CLAIMING to have applied the Pythagorean theorem, and still were 4ft off 😂
To get a perfectly square corner, you want to aim for a measurement ratio of 3:4:5. In other words, you want a three-foot length on your straight line, a four-foot length on your perpendicular line, and a five-foot length across. If all three measurements are correct, you'll have a perfectly square corner.
the sound of that 4.5inch casing banging together takes me back to my days working on oil rigs - though not in the USA. I guess thats a good thing about Texas, lots of scrap casing that can be repurposed. 42-45 foot joints are a useful size.
They took a pic of the mailbox, was that proof of service? Did we just watch someone get served a lawsuit? The answer is no, but that would have been funny if matt walked up there just to get sued.
11:09 that runway strip you could invite the I think they are called “real flite” they run flite fest for RC planes and helicopters, or maybe some other rc use? just an idea
29:40 I see the outline of Texas forming in this drone video still. Roads follow Brazos and Colorado Rivers with a bit of imagination. He has the panhandle and needs the Rio Grande and the El Paso Big Bend stretch.
When you paint the polls, paint the tarp with regular latex paint . It will give you a little more life in your tarp and close up the holes a little. Might help.
@patarmstrong3582 that's why the landscape guys told the used latex .It was still fine after 5 years in Vegas .And the ine they replaced was only 3 years old.
just thought of an idea for tensioning the canopy, at each of the four corners you could have a length of chain link that can slot into slots cut into the top of the pipes so as it stretches you can retention it by moving the chain up one link and hanging the excess inside the pipe. That way, if there's a strong enough wind, it will just pull the chain up out the slot and not rip the canopy.
People a few hundred years from now are going to say. What is this creation, and ponder on what it is. Does the alignment go with the stars, does it go with the moon and sun??🤔😅 -us nope we just shot at it....
Simple solution to avoid a center pipe, string two cable diagonal between the four pipes with tensioners. This should create the flat surface you are looking for across the canopy.
If you put a whole row of posts across the front of the range, connected by cables, then you could slide the canopy along it to any position. So it could be moved to the side if you were shooting from the middle long range.
@@jiminauburn5073 .. that might be possible if the tension on the wires is not too high. But he would then need a full row of posts on the back too and he would need many wires from front to back to be able to attach the canopy sides also to keep the tension in that direction as well. it would be a lot of work because there is a grommet along the sides of the canopy almost every two feet and every one of them needs to be unhooked, and hooked up again.
If you end up in need of more shade/shelter look into repurpose of old ship sails it should be fairly reasonable it’s pretty hardy stuff and it’s UV stable.
Put in two more pipes but taller along to outside sides, ether in the middle or to the front, run around wire rope to make a peak for debris to fall off or be blown off.
The tensioners are called turn buckles. I have a shade cloth over my vegetable garden for when it’s 105 outside. Also, you probably want something like 90 percent shade cloth out there. Looks awesome!!
The quickest way to check for square is the 3, 4, 5 rule. Pick a corner, measure 3 feet in one direction, 4 foot in the other and the distance diagonally between should be 5 feet. Otherwise it's out of square.
@@jaydunbar7538 I did notice that, but at the time he was gesturing to the midle area of the project, so I was wondering if he meant the outer perimeter or the interior.
Looks good. When that shade gets too weathered, you should look at a heavier duty one with a cable running through the whole perimeter. Just tighten 4 turnbuckles and your done.
if you don't feel like capping the pipe or adding drain holes, you could reinforce it further by filling with concrete. it will still degrade with age, but it slows it considerably
Give yourself credit, you're standing in the middle of a huge project , I can't believe how far the range berm has come. Seems like dump trucks were on top a couple months ago
If you do slab, you should make it angle down toward the center a little bit kind of like an upside down pyramid. And then cover it with some kind of expanded steel that will allow spent casings to fall through and collect in the middle, then you can just install a small access door and vacuum up all the brass.
Wind loads can surprise you with lateral loads and uplift. Be careful during wind storms - you don't want to test your cable attachments while you are underneath!
I'd fly in and have been dying to see the airstrip get rehabbed. Short flight from Houston, but flying it always more fun! I know many places that do an annual fly-in. Check out Reklaw Fly In. Good sized event, folks camping, volunteers, pancake breakfasts, etc. Tons of fun, good PR, good people. I'd be happy to help get the airstrip back safe again.
a little trick we use in aus the 3,4,5 rule. makes a perfect 90 degree corner. well in metric not sure with banana units. 3-30-300mm one side 4-40-400mm other side and the difference between the marks should be 5-50-500mm to make a 90 degree corner.
I put several tarp canopies up for our decks and bought 93% sun blockage tried 70 still to hot. Also you can put some vertically on the ends to help block late afternoon sun. You will probably need a center post also but great job, looks like mine times 10 😊
I would get the biggest camo net I could find and tent it in a little more on the sides so you get maximum shade all day long. Would also look sick. A pole in the middle is a good idea
String line one corner the length, put a maker, then from same point same length 45 degree on the string line is last corner ,then measure the width done all square ... but i get ur point about the lay of land
ONE OTHER COMMENT ON CONCRETE. In addition to waiting for concrete to cure, you should check the mix ticket from the driver. If you are getting concrete from a mix plant you should not pour it if it is more than 30 min old. Also you should know what slump level you should have and buy your own slump cone and slump mixing rod. As important as a hammer to a carpenter.
Matt right there you should just build the roof like what you have at the old range..then it’s not a worry out of the elements and looks nicer.your doing half the work already and you know that’s what you want there so just do it use the poles and frame off those and a roof and boom looks great and serves all purposes 🤷🏻♂️ be safe bud thanks for all you guys do
You don't have to mix the concrete with water. Just pour it in the hole dry and tamp all the air out while keeping the poles plumb. Fill the last 2-4" with dirt and tamp... Ground moisture, humidity and or rain will harden it within a week. It will be perfect with no need for cross bracing...
I've been loyal for so long, Matt... I bought your hat as soon as you started bunker branding. The hat is almost destroyed, but my wife won't let me buy another one. What are the chances that you see this and send me one! 😅
You could do Orchard netting you could do 50% to 70% sunlight or more we use it for birds so they don't get it that much shaded but they way we have it its really high and it would be a prefect option for you
there is a method called 3,4,5 to make sure you are square. measure 3' on one string 4' on the other. then the two points should measure 5' to each other. like a triangle. You can also measure corner to corner. should be the same measurement if square.
Matt, they sell used Billboard signs on CList, usually you can find when you search the repurpose/recycle listings. GREAT progress on the Ranch CONGRATS!!!
You definitely need either a center post or two of them to keep things like hail and snow/ice from destroying/accumulating in it. I had to do it with my pool deck cover.
The awning was great for the range experience. David and Mike did a fantastic job treated us great. Thanks for the great time. The Daniels and Brights had a fantastic time
Matt needs to pin this!
Already a success 🎉
Thanks guys! Glad you guys had fun!!!
Why don't just get some Containers like 2 and space them with an Awning in the middle for seating
@@OffTheRanchhey Matt , if you measure a square from corner to corner it will be the same number on each corner if it is square . If it is a different measurement then move the one side until it is the same distance. Easy way to square something
Make sure you cap those vertical pipes, or they'll fill with water and rust
I came to say the same thing, or atleast drill a drain hole at the bottom.
Or wasps and bees..
If they fill with water and it ends up freezing, it can deform them or worse. I've seen it happen. It's actually pretty impressive.
Y'all really think a pipe is going to fill up with water in Texas? 🤔 Might see stream coming out first 😂
Ya, like he said 😊
When a good storm rolls in and the wind tears those grommets out, call Kraftsman Commercial Playgrounds & Waterparks. They can get you a thicker (blocks out more light) canopy with pockets sewn on all the edges for your cable to go through. I used to work for them. Good family owned business in Spring,Tx.
Skydive Desperado! Get the airstrip up and running and rent the plane! It would be perfect! Create a nice landing area for jumpers, covered packing areas, a nice covered hangout area for tandem and fun jumpers.
You could get that up and running relatively quickly
Id make the trip to fun jump there for sure and I know plenty of other skydivers who would as well!
GREAT. IDEA.
But I'll bet the insurance would be astronomical.
Too much of a liability.
My oldest is 12 and ive been watching you forever . I love watching these kids grow up, its awesome seeing how us as dads will break the bank for our kids to learn and enjoy life
Brother, old military camo nets would have been cool. And probably given you more shade.
maybe he can ge some from military surplus sale.
Seems like a perfect solution, Demo style.
He has a problem with high wind, I wouldn’t trust those not to tear
Matt do you plan to do a cement pad and put a tin roof on it sort of like gun clubs have, then you can put solar panels out there and have power for cameras and other stuff at ur big gatherings
Honestly with good battery’s he most likely could have a small air conditioner setup
I was talking surveillance cameras
Genius!
Don't put mail in a mailbox. Thats actually a federal crime. It isn't often enforced, but you may get the one postal inspector with a wild hair up his ass.
If you watch the whole video he says he might later on. Try listening just a little more.
Just a suggestion for when you inevitability climb back up to paint/cap the poles. Pour some concrete down em to absorb any moisture that got in there, let it set, cap it, and then weld on some collars to slide an oversized pipe down onto that can pivot and weld some pulleys to the pivot pipes. Then you can run the tension cables through the pulleys and down to ground level for retensioning or knockdown when/if the mesh needs repair or replacement.
That’s a great idea!
Fix up the strip, get a pilots license, get a plane, start another channel, "Above The Ranch"?
Make sure to cap your poles. Will fill with water and rust out from the inside or will give your wasps and hornets a spot to place nests.. which won't be good later on.
Also you should criss-cross the wire, corner to corner, to keep it from sagging in the middle. But I love it!!
Isn't that what he did?
I’d actually fill them with sand or gravel or dirt and cap the tops with foam or flexseal or the like. You want a “thud” rather than the hollow “ping” for a permanent vertical pipe.
You got a half mile strip, You should build a dragstrip!
Sadly need more than a half mile for the prep zone and run off and stuff
Not to mention, cant have that near AirBnb guests
Pretty sure he has enough problems with insurance and the range. Dragstrips be hurting down all over because they can't afford or get insurance.
@@spencer14130 Why?
@@T0X1C89 liability, not to mention most people staying at an airbnb dont want to hear cars ripping a drag strip all day/night. Id enjoy it but i can guarantee most would not
Since you asked the question..
Grenade comes from the French for pomegranate likely due to early versions resembling the fruit, the first recorded use was in 1536 during the siege of Arles, the word grenade comes from the Latin granatus meaning "filled with grain"
My brain hurts when there's unanswered questions 🤷😅
I believe he was referring to the female variety
The makers of that material have multiple variations on how much sun to block. My partners and I researched wind resistance on the different versions. Almost no difference. So if you want more shade, go for the 90% block. You’ll like it more. Also this is plastic coated filaments and yarn (yeah, I know) It will stretch quite a lot, especially under heat. We found that out the hard way.
if you want more shade, I suggest buying another canopy, identical in size and lay it on top of the one you already have. I have done that and it works perfectly. You can attach the top canopy to the bottom one with zip ties. Also think about hanging some 3 foot canopies along the back and sides to shield the sun coming in from the side. It will give you a larger shaded area directly under the roof canopy as the sun moves during the day or stays lower in the sky during winter months.
Build a second berm < > facing the other one that is just as tall and shoot from the shade of one towards the other depending on the time of day.
Matt put up a roofed structure that you can collect the water from to water the grassland you have there when the rain is scarce in the drier months of the year, you know you will eventually so do it from the start and make sure your regulars know as I am sure not having shade there is influencing their decisions to not come to your range at times, Flimsy shade cloth ain't going to cut it when your looking to build a professional reputation as a serious facility.
I love it when youtube doesn't notify me that you just posted even though I have notifications enabled 🙃🙃
I got the notification on my phone but not on the laptop. I don't watch youtube on my phone if I can avoid it so I had to search for the video
Same here
Me too .
Hey Matt, just so you know level is horizontal ,Vertical is plum. But whichever way you say, I love watching your videos.
Build a lean-to for shooting benches on top of an old Class A chassis, make the cockpit like a boat helm. You can park it anywhere you want. Maybe build three. Look for Class A's with leveling systems. You could also slap an old party barge on top of a class A chassis, minus the pontoons of course.
The grass cover on the berms is coming along really nicely.
26;45
You should loosen up the turn buckles a lot, then tighten the cables. That way, as it stretches, you'll be able to tighten the turn buckles for adjustment.
Run a cable under the canopy down the middle and tension it off the other cables and that should hold the center of it up and keep it from sagging.
My dad owns the longest privately owned grass airstrip in Texas. It would be cool to have Matt as the challenger to it. He would have to make sure that it's definitely longer than half a mile.
If you do a center post make sure there are no edges on the top. Wind will cause the mesh to snag on the post and cut through those shade cloths.
Also U pour the concrete in the hole and then insert the pole, having the wet concrete fill up the inside of the pipe for a better footing. 👍
You can camouflage netting to your screen and it'd help with the shade issue. There's usually some available from a surplus store that's not too expensive as an option.
I know it dosnt rain super tons there usually, but I'd definitely weld caps at the tops of the post being steel sunk in concrete with nowhere for water to go otherwise you'll be rusting those rather quickly inside. Otherwise a cool addition. Love how you love the wire as well.
It doesn't rain often out here but when it does... Oh boy does it.
Matt be careful about messing with curing concrete:
24 to 48 hours - after inital set, forms can be removed and people can walk on the surface
7 days - after partial curing, traffic from vehicles and equipment is okay
28 days - at this point, the concrete should be fully cured
To prevent debris from getting on top. Should have had the rear pipes about 2 feet higher so there would be an angle one the "roof".
This would negate the need for a center post to prevent debris from collecting on top
It would still sag, but it would be closer to the shorter side.
nah just needs centre post with more wire.
That was a great day, Dave and Mikey were awesome and we all enjoyed the day a lot and it was great to meet you. Just have to correct and say we were from Scotland rather than Ireland. Same but different. 😂
The Saran shade cloth will shrink over time and what was ~65-70% shade cloth will deteriorate to closer to 50-55%. That shrinkage will then put more stress on the grommets. I agree with another comment that the carabiners are the way to go.
the best part of your videos is that you are actually there doing the work the whole time. its not just for the camera. much love and respect from a fellow Matt
Matt you can use the airway for skydiving, you dont need to have a resort yet
A lot of canopy cover would be great, but I mean, A _LOT_ , layered like an outdoor ampitheater almost. angles of triangles/trapezoids to the ground will work great. It would feel like the old camp, but evolved big time. That... is just a tarp. lmao
MATT use carabiners the hook that shade screen onto the wire so you can slide it to one side and you can remove it easier because of you ever have to replace it you have to take the cable down
Spray paint your logo (or a sponsors logo) in the middle of your shade tarps. Then, when the sun shines through, you'd see it on the ground. You'd also catch it in drone shots
you should definitely talk to cleetus about that air strip if you do get it cleaned up
3,4,5 method is always my go to for that right angle :D
You might want to put cable around the poll then thru the eyelet. that way it doesn't pull onlo on the eyelet just saying looking great !
Concrete takes 28 days to fully cure. It will be "hard" in about 12 hours, but you want to give it at least a full day before putting any type of stress on it.
The 3 4 5 triangle is your friend for squaring up any size right angle 👌🏻 the range is looking 🔥
Yep
Exactly. Make a 44ft + 22ft + 49.2ft triangle from that rope and be done in 5 minutes, including spraying markers. Instead, they wasted 2+ hours on that aligning entirely useless batter boards with triangle rulers comedy, CLAIMING to have applied the Pythagorean theorem, and still were 4ft off 😂
To get a perfectly square corner, you want to aim for a measurement ratio of 3:4:5. In other words, you want a three-foot length on your straight line, a four-foot length on your perpendicular line, and a five-foot length across. If all three measurements are correct, you'll have a perfectly square corner.
*By drilling those holes, the most you’re accomplishing is venting one of your SOON TO BE DISCOVERED caves.*
You probably won't read this but I hope you cap the poles! The will fill with water and rust out sooner than you think! 🍻
100% fix up that airstrip it would be perfect
Then Cleeter could come down in the cub!
Matt can use the airway for skydiving, or hot air balloons he has such a big beautiful property he doesnt need to have a resort yet
This ^^^
Nah F that airstrip turn it into a track, mile or quarter mile
For a large tent I set up for events we ordered a wire to run diagonally, corner to corner, to prevent sagging and the build up of snow and water.
the sound of that 4.5inch casing banging together takes me back to my days working on oil rigs - though not in the USA.
I guess thats a good thing about Texas, lots of scrap casing that can be repurposed. 42-45 foot joints are a useful size.
Yup, soon as I saw it I though "that's drill pipe".
32. Foot long joints
@@briantruck2284 Pretty expensive posts, that's not just mild steel tube.
Good things take time, can’t rush it. When the Desperado does fully open, it will be legendary.
Maybe they were dropping off mail to the neighbors and have no idea who Matt Carricker is. 🤔
They took a pic of the mailbox, was that proof of service? Did we just watch someone get served a lawsuit? The answer is no, but that would have been funny if matt walked up there just to get sued.
They were taking a picture of themselves holding the letter. More curious now
@@mrbreck1 you just like to sue everyone, are you American??
I thought the same thing
11:09 that runway strip you could invite the I think they are called “real flite” they run flite fest for RC planes and helicopters, or maybe some other rc use? just an idea
Yes, I think he is referring to Josh Bixler of Flite Test. This could be home of Flite Fest South.
There must be hundreds of comments suggesting a dragstrip looks like that'll be the next project, hope we get to see it being made
You should check out Ben Avery shooting range in Phoenix Arizona. Similar set up and pretty simple set up. Think it would work out for your situation.
I always liked rio salado sportsmen club at usury pass.
29:40 I see the outline of Texas forming in this drone video still. Roads follow Brazos and Colorado Rivers with a bit of imagination. He has the panhandle and needs the Rio Grande and the El Paso Big Bend stretch.
I was thinking the exact same thing!
Matt you should get a giant Texas or Demolitia Flag from Dixie Flag Company in Downtown SA and make it your canopy.
When you paint the polls, paint the tarp with regular latex paint . It will give you a little more life in your tarp and close up the holes a little. Might help.
i would be worried about paint chips flaking off as the canopy flexes in the sun, constantly showering the folks below with little paint pieces
Don't worry about the flaking paint, count on it.
nah nah nah, just order a better tarp
@patarmstrong3582 that's why the landscape guys told the used latex .It was still fine after 5 years in Vegas .And the ine they replaced was only 3 years old.
just thought of an idea for tensioning the canopy, at each of the four corners you could have a length of chain link that can slot into slots cut into the top of the pipes so as it stretches you can retention it by moving the chain up one link and hanging the excess inside the pipe. That way, if there's a strong enough wind, it will just pull the chain up out the slot and not rip the canopy.
People a few hundred years from now are going to say. What is this creation, and ponder on what it is. Does the alignment go with the stars, does it go with the moon and sun??🤔😅
-us nope we just shot at it....
“From the finds, we surmise that they seemed to value lead and copper as valuable metals they sacrificed to their gods”
@@franciscodanconia4324 Facts ...😅
It's covering the treasure map for oak island
I love watching Matt’s first rendition of a project. Can’t wait for 3 months from now when shade project 2.0 begins!
YES!!! YOU NEED TO FIX THE AIRSTRIP SOON!!! I’d be more than happy to fly in! Having a pilot’s license makes the world much smaller!!!
Simple solution to avoid a center pipe, string two cable diagonal between the four pipes with tensioners. This should create the flat surface you are looking for across the canopy.
I just now reasized, of course Matt’s shooting range berms make a huge “m” for mat visible from space.
he could set up a little concession stand out there, he can call it Matt Donalds.....
Or at least visible during a skydiving experience from his airstrip
If you put a whole row of posts across the front of the range, connected by cables, then you could slide the canopy along it to any position. So it could be moved to the side if you were shooting from the middle long range.
how do you slide the canopy past a post when the wire holding the canopy is attached to that post?
@@silentepsilon888 I was thinking that you could disconnect from that post temporarily, slide them all by, and then hook the post back up.
@@jiminauburn5073 .. that might be possible if the tension on the wires is not too high. But he would then need a full row of posts on the back too and he would need many wires from front to back to be able to attach the canopy sides also to keep the tension in that direction as well. it would be a lot of work because there is a grommet along the sides of the canopy almost every two feet and every one of them needs to be unhooked, and hooked up again.
The effort you put into this really shows!
If you end up in need of more shade/shelter look into repurpose of old ship sails it should be fairly reasonable it’s pretty hardy stuff and it’s UV stable.
Make the runway a drag track Matt!!!!!
Put in two more pipes but taller along to outside sides, ether in the middle or to the front, run around wire rope to make a peak for debris to fall off or be blown off.
MATT! Drill drain holes at the bottom, or you'll be sorry-ry-ry-ry.
The tensioners are called turn buckles. I have a shade cloth over my vegetable garden for when it’s 105 outside.
Also, you probably want something like 90 percent shade cloth out there.
Looks awesome!!
The quickest way to check for square is the 3, 4, 5 rule. Pick a corner, measure 3 feet in one direction, 4 foot in the other and the distance diagonally between should be 5 feet. Otherwise it's out of square.
Wow, didn't know about that, will come in handy for sure, thanks!
And for something this big you could use 15, 20, and 25 feet
He did, but he called it by its actual name the "pythagorean theorem".
Shows Matt is pretty smart, 4 out of 5 people here didn’t know that’s what the Pythagorean theorem is. 👍🏻
@@jaydunbar7538 I did notice that, but at the time he was gesturing to the midle area of the project, so I was wondering if he meant the outer perimeter or the interior.
Looks good. When that shade gets too weathered, you should look at a heavier duty one with a cable running through the whole perimeter. Just tighten 4 turnbuckles and your done.
When you cap the poles, put flagpoles on top or weld some bolts so you can attach flagpoles (pipe) later - more sponsors!!
Great idea.
if you don't feel like capping the pipe or adding drain holes, you could reinforce it further by filling with concrete. it will still degrade with age, but it slows it considerably
Cleetus and heavyD will love that airport
The best part of that awning is if you want more shade all you gotta do is double up the awning.
Give yourself credit, you're standing in the middle of a huge project , I can't believe how far the range berm has come. Seems like dump trucks were on top a couple months ago
If you do slab, you should make it angle down toward the center a little bit kind of like an upside down pyramid. And then cover it with some kind of expanded steel that will allow spent casings to fall through and collect in the middle, then you can just install a small access door and vacuum up all the brass.
MATT those cable clamps are backwards and will fail under a wind load. Never saddle a dead horse.
Wind loads can surprise you with lateral loads and uplift. Be careful during wind storms - you don't want to test your cable attachments while you are underneath!
I'd fly in and have been dying to see the airstrip get rehabbed. Short flight from Houston, but flying it always more fun! I know many places that do an annual fly-in. Check out Reklaw Fly In. Good sized event, folks camping, volunteers, pancake breakfasts, etc. Tons of fun, good PR, good people. I'd be happy to help get the airstrip back safe again.
a little trick we use in aus the 3,4,5 rule. makes a perfect 90 degree corner. well in metric not sure with banana units. 3-30-300mm one side 4-40-400mm other side and the difference between the marks should be 5-50-500mm to make a 90 degree corner.
USE A RANGE FINDER 😊
I put several tarp canopies up for our decks and bought 93% sun blockage tried 70 still to hot. Also you can put some vertically on the ends to help block late afternoon sun. You will probably need a center post also but great job, looks like mine times 10 😊
Turn the airstrip into a long range gun range?
I would get the biggest camo net I could find and tent it in a little more on the sides so you get maximum shade all day long. Would also look sick. A pole in the middle is a good idea
Could remake the landingstrip into a dragrace track 🤙🏻
String line one corner the length, put a maker, then from same point same length 45 degree on the string line is last corner ,then measure the width done all square ... but i get ur point about the lay of land
Sounds like your runway is the perfect opportunity for a drag strip...
ONE OTHER COMMENT ON CONCRETE. In addition to waiting for concrete to cure, you should check the mix ticket from the driver. If you are getting concrete from a mix plant you should not pour it if it is more than 30 min old. Also you should know what slump level you should have and buy your own slump cone and slump mixing rod. As important as a hammer to a carpenter.
Matt right there you should just build the roof like what you have at the old range..then it’s not a worry out of the elements and looks nicer.your doing half the work already and you know that’s what you want there so just do it use the poles and frame off those and a roof and boom looks great and serves all purposes 🤷🏻♂️ be safe bud thanks for all you guys do
You don't have to mix the concrete with water. Just pour it in the hole dry and tamp all the air out while keeping the poles plumb.
Fill the last 2-4" with dirt and tamp... Ground moisture, humidity and or rain will harden it within a week.
It will be perfect with no need for cross bracing...
I've been loyal for so long, Matt... I bought your hat as soon as you started bunker branding. The hat is almost destroyed, but my wife won't let me buy another one. What are the chances that you see this and send me one! 😅
Yeah, Matt. Give the guy a hat!
Get a new Wife.... djezus man..
Get her out of your picture and your life... or stop asking for permission and just buy a hat. It's a hat!
Grow up and stop begging, are you a man or a mouse
@@pd1jap XD
You could do Orchard netting you could do 50% to 70% sunlight or more we use it for birds so they don't get it that much shaded but they way we have it its really high and it would be a prefect option for you
there is a method called 3,4,5 to make sure you are square. measure 3' on one string 4' on the other. then the two points should measure 5' to each other. like a triangle. You can also measure corner to corner. should be the same measurement if square.
I think they're wanting to square it up w/ longitude and latitude, also.
That's literally the Pythagorean theorem... You just used the wrong words. a²+b²=c²
Use oval quick-links between the cables and the canopy grommets. It will make changing out the canopy easier than threading cables.
You telling me yall didn't have a rangefinder to confirm the distance with?
Matt, they sell used Billboard signs on CList, usually you can find when you search the repurpose/recycle listings. GREAT progress on the Ranch CONGRATS!!!
11:02 man it sure would be a shame if cleetus came out for a collab on that runway!
Just what YT needs, _more _ Cleetus fucking McFarland… 🤦🏻♂️
exactly what i was thinking
You definitely need either a center post or two of them to keep things like hail and snow/ice from destroying/accumulating in it. I had to do it with my pool deck cover.
You should use carabiners to connect the canopy to the cables. That would make it much easier to put it up and take it down if needed.
This type of shade sail isn’t designed to go up and down. They’re meant to be a permanent fixture.
Hey Matt .!!!.
Make a square with the string and then measure from corner to corner. If you have the same number it is square
Brandon for ATF Director!! Let's Go Brandon!
Underrated statement!