DIY: Bluetooth 2.1 Loud VU Subwoofer Boombox Speaker
ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- Homemade Powerfull Portable subwoofer speaker:
Speakers: bit.ly/35gCA05
Subwoofer: bit.ly/2p4cwow
Tweeters: bit.ly/2IEG7Me
VU board meter: bit.ly/31YAFvi
18650 Batteries: bit.ly/3b5jbSm
Amplifier board: bit.ly/3yOpXIb
Crossover audio: bit.ly/2B8zHkp
Voltage meter: bit.ly/35mlA8U
Bluetooth module: bit.ly/2IzZp5p
DC isolator 5V: bit.ly/2nwEJ6Z
Power jack: bit.ly/3a5hGTx
Mini switch: bit.ly/2MKvw5j
6S pcb board : bit.ly/321y8jN
Step down module: bit.ly/2Vtlec7
bit.ly/2Wffql4
or
Battery pack: bit.ly/36sF1gG
Adjustable Drill bit: bit.ly/2p3GFnQ
Multimeter: bit.ly/2ICftDt
-Using dc/dc isolator B0505S to prevent ground loop/ "hum" effect.
-Width 36cm, height 17.5cm, depth 16cm.
-Painted with black mate spray can.
-Working voltage from 16v to 25V.
-Schematic at 12:30.
Copyright free music list:
Trip KV [Vlog No Copyright Music]
Life Goes OnDel [Vlog No Copyright Music]
Kozah - Haha [NCS Release]
Raven & Kreyn - Bubble [NCS Release]
Dream to live ZAYFALL [Vlog No Copyright Music]
RetroVision - Hope [NCS Release]
Robin Hustin - On Fire [NCS Release]
Summertime Vibes Del. [Vlog No Copyright Music]
Max Brhon - Cyberpunk [NCS Release]
PatrickReza - Choices [NCS Release]
Coopex - Over The Sun [NCS Release]
ROY KNOX - Earthquake [NCS Release]
Syn Cole - Gizmo [NCS Release]
(-GHXAMP 3 INCH 4OHM Full Range Speaker Woofer Waterproof Tweeter Mid Low frequency For Peerless Speaker Bluetooth DIY 40W
-4 Inch 50W Subwoofer Speaker Units 4ohm Bass Woofer Speaker Home Audio DJ Sound Theater
-4 ohm 80W 1.5Inch 25Core Tweeter HiFi Speaker Fiber Membrane Rubidium Magnetic Speakers Treble Head, Start to finish full video
-2019 Original NCR18650B LiitoKala 18650 3400 mah 3.7 v 3400 mah lithium
-VU Meter Warm Backlight Recording + Audio Level Amp With Driver Board
-60W 2 Way Crossover Speaker Bass Tweeter Frequency Divider For 2-4 inch Inch Speaker Filter Music sound 2800-3200Hz)
Homemade woodworking bluetooth player.
#DTekDIY
![POLYCAT - ข้อความรูปยิ้ม [Music Video]](http://i.ytimg.com/vi/lBhIgPGCgbI/mqdefault.jpg)
Check video description for parts list, music names and additional info.
Tank you for watching :)
I need this
Sir.. can you help me
@@arbiebre889 I want purchase this
@@arbiebre889 capacity?
Nope my item i have my Bluetooth speaker name tronsmart but have problem not open and no incator light
The box looks amazing and the midrange and treble seem very good with a neutral but detailed sound signature. If I were to do it again though maybe emphasize more space for the sub and use a lower port tuning. I'd expect deeper bass from the overall size. Though the sub you linked has no T/S parameters to tune it off of. Parts express has many amazing small 3-5 inch subwoofers that can hit 40hz in a enclosure of that size or smaller. Besides that probably one of your best builds.
Tanks, very appreciated by your comment/feedback ;)
Дааааа чувак, вот это ты заморочился. Обалденный аппарат вышел. Аплодирую стоя. Только для дома и себя любимого его держать надо👏👏👏👏👏👏👏👏👏👏👏👏👍👍👍👍👍👍👍👍👍👍👍👍👍👍🇺🇦
Над дизайном осталось только поработать! Руки у парня на месте!
Дизайн как раз на высоте. Вы просто может не привыкли к такому дизайну после магазинных еще. Ну может что то с крепежными болтами подумать или утопить их. А так сам стиль хороший строгий приборный мужской.
Very nice speaker and sound too. Keep up the good work man!
Tanks, glad you liked
Glues before testing. That’s confident.👏🏼👏🏼👏🏼👏🏼
i did a few builds in the last months ;)
Да соглашусь. Работа хорошая и своими руками. Молодец парень.
Great build and you can tell the impressive sound quality from what you have designed and built. It certainly can kick, clear and punchy. A true beat box👍
Thanks, glad you liked
I love the simple look! you should definitly sell your speakers! would love to buy one :)
Its amazing, you made a great thing, most of us won't realize our struggle.
thanks
Well done. Good craftmanship! (Expect that wiring...)
But I dont think that woofer did get enough volume. Thats why the bass sounds hollow and has no "deepness". Instead lots of volume was wasted on those midrange speakers and that electronics compartment.
A 3 way isnt needed anyways with a woofer of that size. That 4 inch woofer can easily play up to like ~2 kHz where the tweeters carry on. With a 2 way you couldve doubled the volume for the woofer and couldve reduced the electronics by like 50%... The result wouldve been a much better sound.
Oh and consider using a fuse for those 18650 cells, as they can easily burn you house down.
Thanks for your comment, very apreciated.
Great build. First I thought it was bigger. And saw three ports one should be okay. Too many electricals. You managed to put all things in it. That's impressive
This is the best build I think I've seen. Very nice work and attention to detail.
Tank you !
По мне так хорошая оралка получилась, за труды лайк.
El mejor que he visto hasta el momento. Quedó Excelente. Buena división de componentes y circuitos. La mayoría coloca todo dentro del recinto muy aglomerado y sin estética.
how refreshing to see someone with excellent soldering skills and good cable management.
Un gran trabajo excelente, un saludo
WOW!! GOES 2 SHOW YOU, ONCE YOU PUT YOUR MIND 2 IT, IT CAN BE ACCOMPLISHED. MUCH RESPECT 2 YOU SIR.
Работа что надо, мастер!
The easiest part of this project is making a hole using the router. Thats what I can do... Very Nice sound box....
Que buen proyecto, saludos desde Colombia
It's is more batter if you use only Bluetooth mp3 module and a TPA3116 D2 module
um pack de baterias BMS 12v com 9 células samsung(2400mah) consegue alimentar esse amplificador por quanto tempo ?
12:00 - 22:30 what's going on here? 😀 perfect job 👍👍
Очень круто, но совсем непонятно. Корпус сделал хорошо и без всяких 3д принтеров. Молодец. Остальное - не понятно. Какие динамики, усилитель, комплектующие, сколько работает, как подключено питание? Понимаю, что снято не для всех...но все равно хорошо человек поработал.
Caixinha de som. Muito top em,
Bonita.
Queria saber ? Como chama essa broca. Que voce fez. Pra por os altos falantes. No caso o circulos. !
HOLEECRAPWHATJUSTHAPPENED???
Bravo !!! 👏😎
This is the most complicated speaker on youtube, but feels like one of best sounding, maybe your recording mic is reason for that, but good job
I recorded with the camera´s mic.
@@DTeK good build, i definetely will get inspired from this, building my own
Great work, man! You should consider selling your pieces! They're of incredible quality and great looks! Simply outstanding!!!
Thanks
Wow your attention to detail is flawless! Good job on that
Thanks, glad you liked.
I am think about trying to build something like this but use TPA3116 it has bluetooth buildin and a little more watts,it is a 2x50w + 100w. I am planing on pushing a little bit larger speakers. love the box that you made It all look really nice and easy to take apart if you bust a speaker. I will deffantly take inspiration when building my box.
Tanks , glad you liked, iyes its easy to acess all the parts.
Nice work bro and even lookin soo nice... lots of love from INDIA ...👍🏻👍🏻👍🏻
Tank you
Projekt 1 klasa w malej obudowie tyle komór + miejsce na elektryka brawo, super
Looks great - nice job on the porting and separate enclosures.
OMG what bass👍, I like it
Tanks, bass is life :)
Flawless build. You just earned youself a subsciber! I am wanting to build a 2.1 with that woofer. What is a ggod place to start with on air space and tuning for it? Thank you
Thanks, there are plenty of sites where you can find calculators to help you to tune the woofers and sub woofers but it will increase the size of the speaker box 3 or 4 times (depends the parameters of the speakers), that could be a problem if you want a portable device :)
@@DTeK thats where im having a problem. I cannot find the peramiters for this driver anywhere, and donot have the test equipment anywhere. Have the same woofer as you do. Thanks again man.
Good job sir
🔈🔈🔈🔊🔊🔉🔉🔊🔊🔈🔈🔈🔊🔊🔉🔉🔊🔈🔈
Can u build me one and i pay for it 😩 plz.... amazing work 🔝💪❤
PLEASE I WONT ONE
@@zake1996 please stop begging buy or make your own
...i absolutely love your work!!!...make me one please!!!!
Колонка получилась очень даже ничего, но есть ошибка, нужно было делать не фазо-инвертор, а вклеить пасику
Столько проводов!:) Страшный сон электрика называется!:)
Hi.what voltage to charge the battery pack? can you charge the batteries and listen to music at the same time? Thank you for your answer.
This bms is charged at 25.5 volts and yes you can use while charging
LED Mini Display Module. DC30V right?
How long is the battery life, roughly?
Can you add a charging board for the batteries?
Thanks.
yes that´s the one i used, the charging module link is there its the pcb board link
Props to you man! I've seen many builds on here, but yours in truly outstanding. If i'm ever going to built a portable speaker, i would build it like yours! Thank you so much for this detailed Video and the list in the description. It's much appreciated!!
Tank you, very apreciated for the positive feedback, good luck with your future build ;)
The best DIY Bt speaker video i have ever seen. Ty 👍❤️
I have seen like most of the videos of DIY bluetooth speaker. Also, To the video you are stating, Does it have a sub 2.1 battery powered ?
Glad you liked, tanks
Снаружи выглядит очень круто
5:34 the art of "gambiarra"
gambiarra: is a way and improvise something to solve a problem
VC fala em GAMBIARRA?
Parabéns pelo belo projeto... capricho em cada detalhe
Nice project. Love the matte black, quasi-goth look. Good job.
Te kedo épico muy bonita la bocina
I will do a stereo speaker as my final school project, with passive crossovers though. I hope it won‘t be too hard.
Before building, did you measure what Volume the cabinet has and how long the port has to be for an optimal sound output, or did you take random lengths?
Speakers needed more room for sure, and a passive radiator in the back woulda been ideal
I want this what a amazing creativity i realy love this speaker
Amazing build .
Awesome result! Love the boombox design and sounds great!
thanks
Yep, that pumps nice.
Buen video amigo eres un crack saludos desde Perú
Excellent job. I would like to ask you something. At the schematic diagram there is a small green board that is connected with isolator B0505S. What is this..?
Thanks, its a step down convertor or voltage regulator, it drops the main voltage to 5 v for the b0505s, you can see it here 17:37
Bwoy, that beast sound like hell! Respect!
Колонка огонь по-любому, но вот дизайн немного можно было и получше сделать! Сам химичу, знаю что играет хорошо! Лайк!
Very nice. i would give the sub more of the cabin volume though . How many liters and what an f3 and what tuning frequency does the Sub have in this enclosure?
Did you follow some preexisting design? Curious about the acoustic side of the design. Speaker position, bass reflexes etc. Overall, nice project.
No i created my own design, about speaker positions i wanted to do it different of my other 2.1 speaker that i did one year ago, about bass reflex and ports i didn´t do any calculations, i have not "unlocked" the ability to tune a subwoofer yet ;) in my future projects i will spend some time to try tu calculate the ports size and other parameters of the sub woofer.
@@DTeK
First off I gotta say Im quite impressed with the sound , it puts out a lot volume and is stays clean/clear on a high volume too wich is good.
I really wouldnt mind to have it at home haha ;) I would use it a lot I think.
But bass port looks a bit too narrow/small to me , at least I think so.
Did you also put some damping material inside the box ?
The bass sounds a bit in the mid range (maybe irl its totaly different?? because I judge by a video now) , changing the port in size will influence this quite a lot.
Ive made in the past a quite big speaker like 8 times the size you made and I also made a port like that size if I compare speaker size + port , it didnt had a lot of low end untill I made the port bigger.
I really was amazed that it made such a difference.
Maybe it would be fun to make something to change fast with different sizes of ports and experiment with it.
Also those bass ports with curved edges (like carburetor trumpets look) will be better then a straight pipe I guess.
Where you put it and pipe lenght do things with low end too :P still great build , one decent speaker!
I recently started to use foil on my wooden cabinets instead of painting speakers , much faster and looks like it came from a factory :) I also like to make them with memory foam glued on it and then stretch PU leather over the edges , easy to work with and looks really neat.
Very appreciated for your comment, the bass port could be bigger, i was going to try different port sizes, that was the original ideia, but then i was moving in a good pace through the project and ended with the first port size and pipe.
Yes painting takes a lot of effort i was tinking about vinyl or syntetic leather, its easy to apply (i hope it will be easy) and its more scrath resistent.
на какую частоту настроены фазики?
да на обум воткнул трубы какие есть. видно же что ветра много очень, я не сомневаюсь, что есть паразитные звуки фазика из-за скорости ветра в фазике
Very good, congratulations......
Very nice loud soud
Great video. you are a great worker. I like very much this proyect. Thank you for show your fine work.
thanks
По идее у тебя место( объём для короба под сабвуфер) должен быть больше . А так всё идеально
Хороший дизайн!
Awesome man love your priceless work, from Pakistan
Дорого но мощно 💪
Nice product. Great job
tanks
Amigo, poderia me ajudar no seguinte, fiz uma caixinha de som usando a placa amp tpa3116, mas o problema é que está dando um 'POC' barulho no auto falante quando desligo a chave de energia dela. Eu já tentei quase de tudo, coloquei chave separada para sequência o desligamento, pra desligar o Bluetooth por último, testei no Pac de bateria 16.8v, só na Fonte com 21v, com a placa de sinal de áudio Bluetooth desconectado da placa amp, sempre dá um estralo mais leve quando liga, e quando desliga dá um estralo mais forte nos auto falantes. Sabe como eu poderia resolver esse soco no auto falante? Principalmente quando desliga?
Encontrei uma placa de proteção que recebe alimentação, e tem 2 rele , um em cada entrada dela. E retarda a ligação em 3 segundos após alimentação de energia ao ligar.
Mas preciso de um que proteja ao desligar pra não dar o estouro no auto falante. Será que esse mesmo tipo de placa resolveria?
I look good but could you do a Subwoofer Speaker like that but with the Google Home system ??
Hot Glue Potting Tutorial. NIce project.
I like these mounts a lot. congratulations
You must have think it would be cool to build a bluetooth speaker. Well it is. Very good I like it. I like it a lot.
ah ah tanks
Max Brhon - Cyberpunk, perfect track to test out!!!!!!
How much?!!!!!!!!!!!
Awesome job you did right there bro...nice sound system you did.
Parabéns, excelente trabalho !!!
Ele devia colocar um radiador no subwoofer
Oh My! those transitions, that's def a like from me
hello a 12v lithium battery pack can i connect it directly to the amplifier?
Nice work 👍👍👍👌👌
I luv your work inspires me to build my own great job 👍
Thanks, glad you liked
нихера себе замутил чувачек! в копеечку вылилось наверняка.
Я В ПОЛНОМ АХЕРЕ !!!
подписался 😎
лайк поставил 😎
колокол звенит ! 😎
Como é o nome dessa ferramenta de colocar na furadeira para fazer furos maiores?
broca serra copo
@@fernandofontes3548 Mas e essa que tá no vídeo vc sabe o nome?
zajebiste daj jeszcze wygłuszenie łapa w góre
Hats off bro....
All element good terminations for speaker gracias
i like your design
Good Work.
Cái đồng hồ đó mua ở đâu vậy bạn
is there any way i can add an usb option function to play some music?
did you do a frequency tuned volume for the subwoofer compartment?
Việt Nam điểm danh cái
Sar mere pas 7294 2ic apliphyr hai or 2'10inch155megnet spikr hai or osme muje 500wat sbwoofr or lgana hai to konsha bord lun or konsha s.b.filtr lun or konsha transformr lena h plis btana
Excellent work “new Bose born”
👍
Now that's a cool Bluetooth Speaker. I want one!! You selling any?
tanks, no they are for my personal use but i´m considering a giveaway of some kind in the future.
Dear friend I would like an advice please!
What If I use a full ranfe speaker instead of a midrange+tweeter+crossover, in order to monimise the cost?
Definitelly at a larger or more high-end system the difference at the quality of sound would be obvious!
But what about in such a small portable sound system..?
Do you (or anyone else) have a clue?
Thank you!
Yes you can do it only with full range speakers, check my "DIY: Loud Bluetooth Speaker" or "DIY: Slim Portable Bluetooth Speaker" for example
Hi. I will try to make boombox from available materials. Speaker from volvo (2 ohm), some amplifire board from china, transformer from big sony hifi. Unfortunately I have not idea how to build this. I can follows any tutorials on YT, but I wanna use my available parts to seve money. Can you help and sugest any resolving problem?
There is bass and treble splitter before tweeters and mid speakers? does it make 3 bass + 2 tweeter build?
Yes, i used a 2 way crossover and there is a separated channel for the sub woofer
This is insane!