R/C Helicopter Tips and Tricks with BNF Out of the Box and Kit models Part 2 of 2 With Coe Show
ฝัง
- เผยแพร่เมื่อ 21 ต.ค. 2024
- My Go Pro cut off, so here is part two of how to get your RC helicopter dialed like mine. These new Blade helicopters are awesome, and here is some tips that I use.
I have the 360 CFX 3S and I don't like the AR 636A unit in it, mainly because I'm still pretty much a novice that only flies scale / sport... I don't bother with the 3D stuff at all. I've had to rebuild a servo twice now because of minor crashes. I'm determined to successfully fly this bird, so I'm swapping the AR636A for Spektrum's FC6250HX FBL unit, which I'm sure will better suit my style and experience of flying.
At any rate, I truly do enjoy your videos!
Co-would like to see a full bind on the 330 S and some tech tips love your videos
stan from Connecticut
Thanks for all of the videos man. I'm slowly learning new important stuff. I started my RC hobby in june with a Blade 70s and RF8. Now I got the Blade Nano S2, Blade 150s, Blade 230s and lastly a Blade 360CFX 3S. The 360 I got from My girlfriend an a cousin as a birthday gift. It used to be a Demo model in the RC Shop I bought most of My helis. It got a small tail wag, and thanks to this video I know what to do. I just gotta get My thumbs outta My ass first. Thanks again!
Thanks for adding the 360 in.
Forgot to mention my D/R is at 110% and my Expo is at 20%. on aileron, and elevator. That will liven it up alittle for you
Loading a 360 video for ya now.
Great videos!!!! I have the Blade fusion 270 and set up out of the box it has bad tail wag. I also tried to install a ar7200bx and it lands and takes off so much better, but it still had tail wag. Do you have any suggestions?? I really want this heli to fly. Just got the OMP M2 and it flies better than any other heli I have. Still flying the Blade 550x pro, nano s2 and the mcpx bl2. I cannot for the life of me program the three modes from the s2 or the bl2 on my radiomaster tx16s. It's boggling. I have the older dx8 but I do want all models on the tx16. Been flying FPV for a while, and just recently got back into helis after a 3year idle. Keep em' alive!!!!
You don't live near Western MA do you I would pay someone to tune my 330S I tried binding it to my DX-9 but it tips over on takeoff, so I went back to the transmitter it came with and it doesn't tip over but I'd rather use my DX-9 or my NX6 Thanks Rich Great Video by the way!
Nice video .
You could male one to disable SAFE from normal and IU 1 please.?
thanks i like all the blade line and fly the crap out a my 450x and mcpx bl. great teachings thanks.
Hey Coe. 330s or 360 cfx ? What would you choose ? Thanks for answer
great Video CoeShow, thank you. I'm trying to bind my 330s but it doesnt working? Everything done according to the instructions and the binding plug inserted on the side, battery plugged in and trying to bind, unfortunately does not work. What could that be? Does the recipient have to pipeline quickly or slowly? Would be cool to have a video of the binding :)
I have had that problem when my radio is too close to the heli. Try 4 to 6 feet away 👍
How to put the FC6250HX in rate mode to set up the tail ? so the gyro isnt doing all the work.
Hey buddy you no were I can get some main gears for a blade 330x every were I look it's back order been looking for three months now
Suup Doc Ugh! I cant find a listing for an aluminum arm for that tail servo. Woulda been a nice lil extra insurance on the Trio that I upgraded with a 6250HX. I know its an 8.0mm(center to center) arm and the shaft is 3.9mm but for the life of me I cant find the spline count. Anyone? I couldn't see em to count em. Even with my glasses. lmao
I like to smoke cannabis!!